WELCOME MAINTENANCE JOINERY WORKS PLUMBING WORKS TREATMENT OF SUNKEN FLOOR TILING AND REPLACEMENT OF SANITARY FITTINGS INCLUDING MINOR ELECTRICAL REPAIRS AT NORA VISAKHAPATNAM

Amount

Taking down shutters of any description exceeding 2.0sq.m. each complete all as specified and as directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

S&F factory made second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M & L for PCC 1:2:4, Type B0, using (12.5mm graded aggregate) as in door and window frames any size single or double rebated including arrangements for fixing hinges and fixtures as required complete all as specified and as directed.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

S & F 30 mm thick Factory Made Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred [without sash bars] edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 30 mm Flush shutters, [ ISI marked ] solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 30 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [any number of panels] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0sq.m. each complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frame) including mongry complete all as specified and as directed.

S&F factory made solid PVC flush door shutter 30mm thick wood free consisting of frame made out of MS tube of 19 gauge and size of 20mmx40mm for stiles as well as top and bottom rails.MS frame shall be coat of metal primer of approved make as per manufacture. The inside panel shall consists of 20mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cynoacrylate adhesive with 5mm (10.25) thick plain/prelam PVC sheet of density 600 Kg/cbm manufactured by an ISO-9000 certified company, on both sides of inside panel. All four edges of the panel to be sealed with lapping of 10mm thick & 20mm wide PVC sheet battern made by sticking 02 Nos. PVC sheet of 5mm (10.25) thickness using solvent cement adhesive. Door edge lipping to be painted PVC ink of matching colour of plain/prelam moulded of PVC sheet door of 20mm thick (5mmx4 Nos) thick PVC sheet to be given by the lock provision at lock height upto 10th storey and fixing in the frame at site as per specifications complete all as specified and as directed.

S&Fsolid PVC door frame of size 100 mm x 45 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube upto 10th storey building manufactured as per SSR Part Iand fixing in opening as per specification & drawing complete all as specified and as directed. Note for Item No. 12 & 13 : Make of PVC frame / shutter / ventilator shall be of make Sintex / Nandi / Rajshri Plasti Wood.

S&F 100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S&F 75 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S&F 100 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F aluminium plate type II gate and shutter, hook & eye 125mm size [ ISI marked ] complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

S&F 300mm long aluminium alloy, anodized, sliding door bolt [ ISI marked ] with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Powder coated aluminium frames for door and windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

M&L Powder coated aluminium window / ventilator shutters, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 of 100mm long (2 no.), suitable handle (1no.), complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F Anodised aluminium grill, Deco grill" model DG -102 and fixed in channel including necessary fixing arragements etc complete all as specified and as directed

S&F PVC netting (Mulitcolour/plain colour) of PVC wire 1.40mm dia fixed to wooden door shutter with wooden beading complete all as specified and as directed.

Taking down wooden sutters n.exc 1 Sqm each and Resecuring (or) easing and adjusting without taking down shutters of any description exceeding 1 sqm , refixing in same opening excluding hardware complete all as specified and as directed.

Taking down wooden sutters exc. 1 Sqm and n.exc 2 Sqm each and Resecuring (or) easing and adjusting without taking down shutters of any description refixing in same opening excluding hardware complete all as specified and as directed.

Taking down wooden sutters exc. 3 Sqm each and Resecuring (or) easing and adjusting without taking down shutters of any description refixing in same opening excluding hardware complete all as specified and as directed.

S & F in repairs stainless steel wire mesh with average width of aperture n exc 1.40 mm and nominal dia of wire 0.36 mm (Grade A1S1, 316-L with MOLYBDENUM) and fixed with existing/new wooden beading including painting to beading or fixed with stainless steel staples etc. complete all as specified and as directed .

S&F in repairs 150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repairs 100 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Supply and Fix in repairs 100 mm long medium weight, cold rolled mild steel Butt hinges [ ISI Marked ] complete all as specified and as directed .

Supply and Fix in repairs 75 mm long medium weight, cold rolled mild steel Butt hinges [ ISI Marked ] complete all as specified and as directed .

Supply and Fix in repairs 200 mm long Aluminium, anodised, barrel tower bolts [ ISI Marked ] of extruded section complete all as specified and as directed .

Supply and Fix in repairs 125 mm long Aluminium, anodised, barrel tower bolts [ ISI Marked ] of extruded section complete all as specified and as directed .

S & F in repairs, Gate and Shutter, Hooks and Eyes of 125 mm size, of Aluminium plate Type II complete all as specified and as directed.

S&F in repairs Mild steel Helical door spring 300mm long, ordinary rat tail rod patttern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 300mm long aluminium alloy, anodized, sliding door bolt [ ISI marked ] with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Taking down the existing 'locking system, contains any number of levers replacing the strucked / damaged levers, applying oil to all parts and making functional properly and fixed in position complete all as specified and directed.

S&F in repairs continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and as directed.

S & F in repairs Mortise Lock, Vertical type of size 100 mm, 6 Levers with 2 keys of Godrej Make, complete all as specified and as directed.

Supply and Fix in repairs godrej make night latch of 75mm size with 2 levers (vertical type) brass body complete all as specified and as directed .

Supply and Fix in repairs brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed .

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, made of aluminium extruded section body complete all as specified and as directed. Make : Everite / Priya

S&F in repairs Magic eyes for wooden door including all fitting complete all as specified and as directed.

S & F in repairs PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern with polished sheet mirror glass 5 mm thick complete all as specified and directed. Make: Supreme / National / Alphina / Prayag

Supply and Fix in repairs 20mm bore aluminium alloy anodized curtain rails with brackets complete all as specified and as directed Note : Rod and bracket as required at site and as directed by Engineer-in-Charge.

S & F 25 dia stainless steel fancy curtain rod having minimum 2mm thick and not exc 3mm thick alongwith one pair fancy bracket for each opening/door/window complete all as specified and as directed Note : Rod and bracket as required at site and as directed by Engineer-in-Charge.

S & F in repairs Ball catches with 8 mm dia., steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Material and Labour for pre laminated particle board interior grade 18/19mm thick with one side decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work fixed in narrow widths as in pelmet boxes etc width not exceeding 15 cm fixed in repairs complete all as specified and as directed .

Material and Labour for 19 mm thick water proof plywood, MR grade fixed with nails to timber frame work in repairs complete all as specified and as directed .

Material and Labour for 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. Make : Sunmica / Greenlam

Supply and Fix in repairs Continous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps 30mm ( when open) complete all as specified and as directed.

Supply and fix Teak wood lipping / beading of size18mm x 6mm thick, fixed to 19mm ply wood or veneered particle board or block board.with nails complete all as specified and as directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified and as directed .

Supply and Fix Sheet glass 4 mm thick ordinary quality and glazing with wooden beading in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

Supply and Fix Sheet glass 4 mm thick ordinary quality and glazing with wooden beading in square exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

S&F Sheet glass, 5mm thick, ordinary quality and glazing with wooden beading in square/rubber beading in case of aluminum window. Area of each pane exc 0.5 sqm. (Note : The work includes all types of beading for Wooden and aluminum windows) complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

S&F Sheet glass, 5mm thick, ordinary quality and glazing with wooden beading in square/rubber beading in case of aluminum window. Area of each pane not exc 0.5 sqm. (Note : The work includes all types of beading for Wooden and aluminum windows) complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water,removal of rubbish to outside MD Land etc. complete all as specified and as directed .

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying three coat of white wash work upto 10th Storey complete all as specified and as directed.

M&L for rendering 15 mm thick on surfaces of brick work or concrete in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement of rubber beading, aluminium beads, cleats of as required size and refixing in same position complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or errecting stand including pedestal complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

Supply & Fix in repairs Vitreous China Squatting pan of pattern long pan, size 580 mm x 440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F Hand shower Health Faucet with 8mm dia 1.2 metre long Flexible tube and wall hook complete all as specified and as directed. Make : Jaquar ALD-573 / Plumber / Parko

S&F in repairs 110 mm dia Stainless steel grating fixed with white cement complete all as specified and as directed.

S&F in repairs 75mm dia Stainless steel grating fixed with white cement complete all as specified and as directed.

S&F in repairs Wall mixer 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe, connecting legs and wall flange for mixing hot & cold water and fixed to wall complete all as specified and as directed. Make : Jaquar model FUS-29281 / Plumber / Parko

S & F in repairs PTMT PVC connecting pipe 15 mm bore with of length 450 mm fitted with brass unions complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

S&F in repairs for 15mm bore, 600 mm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and as directed. Make : Prayag / Watertec

S&F in repairs for 15mm bore, 750 mm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and as directed. Make : Prayag / Watertec

S&F in repairs for 15mm bore, 600 mm long CP connection to connect gyeser hot water supply fitted with brass unions/nuts to connect iron pipe both ends complete all as specified and as directed. Make : Prayag / Watertec

S&F in repairs Low density waste pipe 40 mm bore working pressure rating 4 Kg / Sqcm with polyethylene union and check nuts 750mm long suitable to steel sink waste complete all as specified and as directed.

S & F in repairs Plastic Water Closet Seat, White, Closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. Make: Johnson Peddar / Parryware / Cera

S & F in repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of complete all as specified and as directed. Make : SLIMLINE / CERA / Hindware

S&F in repairs PVC syphon kit suitable for 10 ltrs capacity 'Slimline' low level flushing cistern and make functional complete all as specified and directed.

S&F in repairs PVC flusing cistern handles & washers etc of make as existing complete all as specified and as directed.

S&F in repairs kitchen Sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size 405 mm x 355 mm x 178 mm complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSBSD-52 / M/S JAYNA / NIRALI

S&F in repairs kitchen sinks made of stainless steel 1 mm thick with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 405 mm x 355 mm x 178mm fixed complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSB-06 / M/S JAYNA / NIRALI

S & F in repairs Stainless Steel Plate Rack of size 600 mm X 750 mm X 250 mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed. Make : Blue Star model No. KPR-311 / M/S JAYNA, NIRALI

S&F in repairs brass spindle (Heavy) ,suitable for 15mm bore bib tap / stop cock / pillar tap etc complete all as specified and as directed. Make : Plaza or equivalent as approved

S&F in repairs brass spindle (Heavy) ,suitable for 15mm bore Concealed stop cock spindle (Heavy) ,for bib tap /stop cock / pillar tap omplete all as specified and as directed. Make : Plaza or equivalent as approved

Disconnecting existing tanks setting aside ( or lowering if required) for hoisting, reconnecting & refixing in position after cleaning and removing all scale dirt etc. from mouths of circulating pipes of loft tanks in kitchen etc.of capacity n.exc.250 ltrs complete all as specified and as directed.

Dismantling water tanks of capacity in litres n exc 250 complete all as specified and as directed.

S&F PVC water tanks 225 ltrs capacity including transporting, fixing and hoisting complete all as specified and as directed. (Work from GF to 10th storey) Make : Sintex / Polycon / Rotex

S & F in repairs 15 mm bore , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 210 grams, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 20 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S & F in repairs 15 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F in repairs 20mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

S&F in repairs 15mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

S&F in repairs 25mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

Taking up or down 15mm bore water tubing and connections complete all as specified and as directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

S & F 15mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

Taking up or down 20mm bore water tubing and connections complete all as specified and as directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F in repairs for Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions, complete all as specified and as directed. Make : Jaquar CON-083KN / Cera / Parryware

S&F for Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, with wall flange screwed for 15 mm dia bore iron pipe, in repairs complete all as specified and as directed. Make : Jaquar CON-047KN / Cera / Parryware

S&F in repairs 15mm bore pillar taps fancy type, Swan neck 2 way cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : Jaquar CON-169KNB / Cera / Parryware

S&F in repairs 15mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : Jaquar / Cera / Parryware

S&F in repairs 120 mm dia circular fancy type brass chromium plated shower rose with swivel joints fixed in repairs complete all as specified and as directed. Make : Jaquar / Cera / Parryware

S&F in repairs 15mm bore Angle cock complete all as specified and as directed. Make : Jaquar Cat. No. CON -053KN / Cera / Parryware

S & F in repairs Vitreous China Ware counter/sunken Wash hand basin white/coloured, fixed on granite palteform with white or mixing with coloured pigment to match the colour of Wash Hand Basin of size 525 x 440 x 195 mm size Make : Model No FLS IVY 5701 of Jaquar or equivalent in parry

S&F in repairs two in one vitreous China wash down water closet pan including flushing cistern (Combined ) fixed to wall including all accessories to fixed the pan complete all as specified and as directed. Make:Model No VGS WHT 81851S of Jaquar or equivalent in Cera.

S&F in repairs two in one, including flushing cistern (combined) vitreous China wash down water closet pan, fixed to wall (including all accessories to fixed the pan) complete all as specified and as directed. Make Model No SLS WHT 6851 of Jaquar or equivalent in Cera.

M&L for Coloured Glazed ceramic tiles concept pattern 450 x 350 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles of size 300 x 300 x 7mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured Glazed ceramic tiles 300mm x 200mm x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 400 x 400 x 8mm in floors etc. in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed

M&L for Vitrified ceramic tiles 10 mm thick (Square/ Rectangular) polished, Light shade, area of each tile not exceeding 0.36 Sq. M, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed or bedding layer in cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M & L for prepolished Granite (of any type) work 16-18 mm thick machine cut (table rubbed and polished) in floorings, steps, jambs, pillars, window-cills, cooking platforms, skirting / dado and the like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed or bedding layer in cement mortar 1:4, 15 mm thick for laying floor finishes and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone complete all as specified and as directed.

Preparing old treated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Preparing old surfaces of walls by brooming down or by steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil and greasy Spots and applying one coat of white wash complete all as specified and as directed

Preparing old surfaces of Ceilings by brooming down or by steel wire brushing, scrapping down smoke, soot , moulds, moss and efflorescent salts and trading oil and greasy Spots and applying one coat of white wash complete all as specified and as directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality

M& L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed . Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M&L for preparing newly plastered surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering to obtain smooth surface etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Labour only for cleaning of gully traps of any size including cleaning blockage in line from gully trap to first man hole complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:6 mixing with water proofing compound over 10mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing and finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even with out using extra cement complete all as specified and as directed.

S&F in repairs corner glass shelf with bracket complete all as specified and as directed. Make : Jaguar Cat No. ACN-1173 / Dripless / Parko

Supply and fix in repair grab bar (stainless steel) 300mm long complete all as specified and directed. Make: Jaquar Cat No. AHS-1501 or equivalet in Dripless / Parko

S&F in repairs CP toilet paper Roll holder complete all as specified and as directed. MAKE : JAQUAR Cat log no. AKP 35751 P or equivalet in Dripless / Parko

S&F in repairs CP towel rack 600mm long with lower hangers complete all as specified and as directed. Make : Jaquar AQN - 7781 or equivalent in Dripless / Parko / Plumber

S&F in repairs Chromium Plated Towel Ring complete all as specified and as directed. Make : JAQUAR Cat log no. AQN -7721 or equivalet in Dripless / Parko

Supply and fix of FRP sheets of 2mm thick as in covering to grills or as view cutter, fixed with self tapping screws complete all as specified and as directed.

M & L for grinding Marble/ Cuddapah/ kota/ Mozoic/ Shahabad floor/ dado with suitable grit size Carborandum stones, and tin oxide polishing including removal of black spots or any other faded spots on existing surfaces complete all as specified and directed.

M & L for Two coat synthetic varnish liquid transperent over a coat of wood filler liquid transparent including preparation to old treated surfaces of wood over 10 Cm width or girth. complete all as speicfied and as directed. Make : Sheenlac / Naidu polish / Asian

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, and disposal off debris and rubbish to out side MD land complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for injecting/ grouting with filling polymer modified non shrinking slurry of EBEX 100 of FOSROC chemicals for sunken floors for toilets by drilling holes at 1M interval to a depth of 60 mmx20mm dia and applying 2 mm thick brush bond over the concrete surfaceby mixing acrylic emulsion NITO BOND BB 4 Ltr with brush bond powder 23 kgs and water 4 ltr slurry all as per technical specification and as required complete work up to work including testing complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) mixed with WPC at 2% by weight of cement, complete all as specified and as directed. Note: WPC shall be measured and paid separately under relevant item.

M & L for High density waste pipe 50 mm dia for working pressure rating 10 Kg / Sqcm fixed to walls / ceilings / floors or spouts complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

M&L for point wiring with two runs of single core 1.5 Sqmm (nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) Concealed/ Semi concealed / suface PVC conduit including flush type metal GI boxes for fixing modular switches, sockets, regulators etc. including provision of multistranded 1.5 Sqmm. copper conductor as earth wire connected to common earth dolly and earth in distribution board, including tee bend, elbows, junction boxes etc including taking down existing point wiring along with fittings and fixtures complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch complete all as specified and as directed.

All as per item No. 148.00 above but for One 3 pin socket outlet 6 amps on independent board complete all as specified and as directed.

All as per item No. 148.00 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable as earth lead complete all as specified and as directed.

All as per item No. 148.00 here in before but for one geyser / AC Point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 4.0 sqmm multistranded and 4.00 sqmm PVC insulated unsheathed solid copper conductor cable as earth lead complete all as specified and as directed. [i] Note for Item No. 148 to 151 : MAKE :(i) CABLE : FINOLEX, PLAZA, POLYCAB/HAVELLS/GLOSTER/HARSH [ ALL ARE ISI MARKED FRLS CABLES ] (ii) PVC CONDUIT : AVON PLAST / GARWARE PLASTICS/ TENCOS LTD/KALINGA/FINOLEX / PRECISION [ ALL ARE ISI MARKED]. [ii] Note 2 : The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface.

S&F Sheet metal enclouser single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amps capacity complete all as specified and as directed. Make : INDO ASIAN / STANDARD / HAVELLS

S & F switch piano flush type single pole 5 Amps AC 240V, 50HZ, complete all as specified and as directed. Make : Anchor / Bajaj / Leader / Cona

S & F Bell push flush type single pole 5 Amps AC 240V, 50HZ, complete all as specified and as directed. Make : Anchor / Bajaj / Leader / Cona

S&F ceiling rose surface bakelite 63mm dia with two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed. Make : Anchor/USHA/CONA

S&F Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed. Make : Legrand / Cona / Anchor / Bajaj

S&F Switch socket combination 2 in1, 3 pin, 5 Amp flush type,universsal complete all as specified and as directed. Make : Anchor / Bajaj / Cona

S & F Switch socket combination 3 pin, 15 A flush type complete all as specified and as directed. Make : Anchor / Bajaj / Cona

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK / Indo Asian

S&F switch Modular type single pole 16 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK / Indo Asian

S&F Modular bell push single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK / Indo Asian

S&F Modular socket 6A - 2/3 pin combined, complete all as specified and as directed. Make: Legrand/ MK/Anchor (Roma)/ABB

S&F Modular socket 16A - 2/3 pin combined, complete all as specified and as directed. Make: Legrand/ MK/Anchor (Roma)/ABB

S&F steped type modular fan regulator,120 W, 2 module complete all as specified and as directed. Make: MK/Anchor (Roma)/ABB/Legrand

S& F modular white cover plate with frame 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 4 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 6 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 8 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F Lamp Holder, PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed. Make : Anchor/Cona/Havells/Bajaj

S&F LED wall / surface mounted " batten and tube rod " integrated channel CRCA body, powder coated white regal batten type luminaire pre-wired for 'T8' LED tube light 1 x 18w LED T8 6000K with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make of Batton & tube rod : Bajaj luminaire cat pt No. BLRB DB 118 for 1 x 18W LED of product code 112181 & Bajaj cat No. BLRB 18W CW of product code No. 112432 / Philips / CG / Havells

S & F LED Mirror Light " Linnet " 14 Watts including taking down existing FTL fittings of any type complete all as specified and as directed. Make:Surya cat no SLE mirror 14 watts / Crompton Cat Part No LCL-14-CDL / HPL Cat no. HLPT51510CW / Insta power Cat part No. 249 143 123.16/ Bajaj / Havells

Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers, capacitors if necessary complete including, new flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding if necessary complete all as specified and directed. Note : Spares used and rewinding shall be measured and paid seperately under relevant item of Sch 'A'.

All as per item No.174 above but exhaust fan of any sweep. Note : Spares used and rewinding shall be measured and paid seperately under relevant item 'A'.

Supply only shakle & clamps including, rubber bush, bolts, nuts & split pin etc complete for ceiling fan of any sweep

Supply only bolts, nuts with frame and washers etc complete for Exhaust fan all as per site requirement. Note for Item No . 176 and 177: The spares for fans repaired under Item No.174 and 175 above shall only be measured and paid under relevant items above.

Taking down the existing storage type water heater of any capacity of any type and size by disconnecting electric connection from ceiling rose, carring out necessary repair, painting, tinkering and welding etc. including cleaning of inner water tank, removing of hard water deposits and connected back and re-fixing in orignal position, grouting, testing and commissioning, complete all as specified and as directed.

S&F in repairs Telephone jack deluxe with shutters 2 line with metal box complete all as specified and as directed. Make: Model No. 800130 RJ11 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S&F in repairs TV outlet socket with metal box complete all as specified and as directed. Make: Model No. 930132 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S&F in repairs LAN socket with metal box complete all as specified and as directed. Make: Model No. RJ 45 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S&F in repairs Vertical Distribution Board, for provision of four pole MCCB (V-Tech) N3 frame upto 250 Amps in 25 KA as in comer 8 way 24 out goings complete all as specified and directed. Make : Indo Asian cat part No. 811894 / Standard / Havells / HPL

S&F in repairs Vertical Distribution Board, SPN, 12 Way, Double door sheet steel phospetised powder painted with 200 Amps rated bus bar 240 Volt neutral link complete all as specified and directed. Make : Indo Asian / Standard / Havells / HPL

S&F in repairs MCCB 415 Volt 36 KA 3 Pole 100 Amps capacity complete all as specified and as directed. Make : Indoasian /Standard/Havells

S & F in repairs Isolator TP 63 Amps 415 Volts complete all as specified and as directed. Make: Indo Asian Cat part No. 811556 [ Optipro ] / STANDARD / HAVELLS

S & F in repairs MCB SPN 40 Amps 240 Volts B curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811144 to 811551 / STANDARD / HAVELLS

S & F in repairs MCB SP 6 to 32 Amps, 240 Volts, B curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811008 to 811015 / STANDARD / HAVELLS

M&L for Sub main wiring with 2 runs of Single Core 2.5 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 20mm bore with accessories along with 1 run of single core 2.5 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 2 runs of Single Core 4 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 20mm bore with accessories along with 1 run of single core 4 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Two runs of 4 sqmm and one runs of 4 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 2 runs of Single Core 6 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 25mm bore with accessories along with 1 run of single core 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length.

S & F rigid non metallic PVC conduit inclusive of all tees, bends, elbows, reducers, tube ends and fixing accessories of size 20mm dia complete all as specified as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

M/S Jayalakshmi Constructions