Bareilly Reorg Water Supply Scheme Phase 1

PUMP HOUSE

Provide all materials, labour, T&P Complete pump house of size (3.60x3.0x3.60)m Chloronome of size (1.85 x 1.2x 3.00)m as per type design.

(1029) Ist class brick work in 1:6 cement and coarse sand mortar in foundation of pump house due to level gap in ground level and plinth level as per approved drawing including supply of all materials, labour, T & P etc. required for proper completion of the work.

OVER HEAD TANK SUB ZONE 3- MAHLAU ) PART-1

OVER HEAD TANK SUB ZONE 5- SAIDPUR HAWKINS

OVER HEAD TANK (SUB ZONE 7- HARTMAN CAMPUS/CHAUDHARY MOHALLA)

OVER HEAD TANK SUB ZONE 8- MAHESHPUR ATTARIYA)

OVER HEAD TANK Sub Zone 10-SARNIYA PART-1

Supply of DI Specials conforming to I.S.- 4985/2000 with solvent cement suitable for above F.O.R destination including all Taxes and insurance @ 10% of supply.

OVER HEAD TANK Sub Zone 10-SARNIYA PART-2(ROTHA MILAK) )

Supply of HDPE Specials conforming to I.S.- 4985/2000 with solvent cement suitable for above HDPE pipe F.O.R destination including all Taxes and insurance @ 5% of supply

OVER HEAD TANK SUB ZONE 11 MATHURAPUR TULIA)

Supply of Tubewell Assembly M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe as required upto 50% of plain pipes rings, well cap bail plug, clamp, reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. Note- Axial Length of Reducer without Ring shall be measured with casing pipe

OVER HEAD TANK SUB ZONE 13-JAUHARPUR)

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 1800 K.L. capacity at 24 M staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK SUB ZONE 2 - FARIDAPUR CHAUDHARY

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 1600 K.L. capacity at 24 M staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK IN ROALI TOLA

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 1600 K.L. capacity at 24 M staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK JUBLI PARK CAMPUS

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2350 K.L. capacity at 26 M staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK IN SUB ZONE-6 HAJIYAPUR

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complet

OVER HEAD TANK SUB ZONE 14 G.I.C CAMPUS

e intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2000 K.L. capacity at 24 M staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK SUB ZONE 18- KATGHAR

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 700 K.L. capacity at 25 M staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK SUB ZONE 8- CI PARK

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 600 K.L. capacity at 25 M staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK in SUB ZONE 2-NEKPUR CAMPUS)

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 500 K.L. capacity at 22 M staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK ZONE 5- BAKARGANJ

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 1300 K.L. capacity at 26 M staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering C

OVER HEAD TANK(SUB ZONE 3 BRAHMPURA/MODEL TOWN CAMPUS)

ollege such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

OVER HEAD TANK SUB ZONE-1 -PEER BOHRA)

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 1300 K.L. capacity at 24 M staging staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

RISING MAIN

Supply of the following sizes of D.I. pipes Class K-9 conforming to latest I.S. 8329/2000 complete in all respect F.O.R. destination including all taxes and insurance.

200 mm dia K-9

Supply of D.I. S/S or flanged Specials conforming to I.S. 8329/2000 Suitable for above C.I.S/S pipe F.O.R destination including all Taxes and insurance. @10 % of supply

Supply of the following sizes of C.I. Double flanged sluice valves as per I.S. 780/1969 class-1 working pressure 10kg/Sqcm F.O.R Destination including all taxes and Insurance.

200mm. dia.

Excavation for pipe line trenches in ordinary soil,(lime, clay or sand including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches.

200 mm dia K-9

Carting from the store (up to 8 Km.) The following sizes of D.I. double pipe k-7 and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints.

200 mm dia K-9

Carting of D/F Sluice valves of following sizes to the site of works lowering them into already prepared trenches and fixing them In position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete.

200mm. dia.

Supply of all materials, labour T&P etc. required and construct masonry type sluice valves chamber as per type design including supply and materials labour, T&P etc. complete.

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2550 K.L. capacity at 24 M staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2200 K.L. capacity at 24 M staging staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2500 K.L. capacity at 24 M staging staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and wa

shout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

Supply of all materials, labour, T & P etc. required and construct thrust blocks at the bends and below the Valves.(RCC 1:1.5:3)

Mild Steel or iron works in R.C.C.

DISTRIBUTION SYSTEM

Supply of the following sizes of DI K-7 & HDPE pipes(PN-6, PE-100) confirming to latest relevant I.S.Codes with H.D.P.E couplers etc complete in all respect F.O.R. destination including all taxes and insurance.

500 mm dia DI Pipe K-7

450 mm dia DI Pipe K-7

400 mm dia DI Pipe K-7

350 mm dia DI Pipe K-7

300 mm dia DI Pipe K-7

250 mm dia DI Pipe K-7

200 mm dia DI Pipe K-7

160 mm dia HDPE pipe (PN-6, PE-100)

140 mm dia HDPE pipe (PN-6, PE-100)

125 mm dia HDPE pipe (PN-6, PE-100)

110 mm dia HDPE pipe (PN-6, PE-100)

90 mm dia HDPE pipe (PN-6, PE-100)

Carting from the store (up to 8 Km.) the following sizes of D.I & HDPE pipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. (SOR 2074-2088)

500 mm dia DI Pipe K-7

450 mm dia DI Pipe K-7

400 mm dia DI Pipe K-7

350 mm dia DI Pipe K-7

300 mm dia DI Pipe K-7

250 mm dia DI Pipe K-7

200 mm dia DI Pipe K-7

160 mm dia HDPE pipe (PN-6, PE-100)

140 mm dia HDPE pipe (PN-6, PE-100)

125 mm dia HDPE pipe (PN-6, PE-100)

110 mm dia HDPE pipe (PN-6, PE-100)

90 mm dia HDPE pipe (PN-6, PE-100)

Supply of the following sizes of C.I. Double flanged sluice valves as per I.S. 780/1969 class-1 working pressure 10kg/sqcm F.O.R destination including all taxes and insurance.

500 mm dia

450 mm dia

400 mm dia

350 mm dia

300 mm dia

250 mm dia

200 mm dia

150 mm dia

125 mm dia

110 mm dia

90 mm dia

Carting of D/F Sluice valves of Following sizes to the site of works Lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.

500 mm dia

450 mm dia

400 mm dia

350 mm dia

300 mm dia

250 mm dia

200 mm dia

150 mm dia

125 mm dia

110 mm dia

90 mm dia

Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches.

Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance.

80 mm dia

Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete to ISS 909 at site including all taxes.

Carting of scour valves to the site of works lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.

80 mm dia

Carting of 80 mm dia flanges fire hydrant of the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.

Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m.

BITUMINOUS ROAD

C.C. ROAD

INTERLOCKING TILES

Reinstatement of following type of road surface for laying pipe line including sorting out of serviceable materials and disposal of unserviceable materials upto a distance of 50M.

BOE road

BOE pavement (40%, with new bricks)

BOE pavement (100% with new bricks)

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2300 K.L. capacity at 24 M staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

Cement Concrete Road 1:2:4 upto 10cm thick

PCC 1:4:8 base of 15cm thick below CC road slab

Interlocking Tiles 80 mm thick

Interlocking Tiles (40% with new tiles)

Interlocking Tiles (100% with new tiles) with P.C.C. 1:4:8 for base of road 100 mm thick

100 mm thick P.C.C. 1:4:8 for sub base of interocking tile road

Supply of all materials, labour T&P etc. required and construct surface box/masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete.

Surface box type

Masonry type

Supply of all materials, labour T&P Etc. required and constructs single tap pillar type stand post as per type design.

Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2600 K.L. capacity at 25 M staging staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 1500 K.L. capacity at 25 M staging staging with seprate coloum stair upto top dome from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

Road diversion due to traffic, night signals, fixing caution boards etc. for the laying of pipeline

Provision of laying of pipeline by trenchless technology including supply of different sizes of MS casing pipe, labour T&P etc. required for proper comlpetion of work.

Submission of design, drawing, testing of bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer's own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 2400 K.L. capacity at 24 M staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/MNIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design in 5 set on the same B.C. No extra payment will be paid for this. .All Railing and Ladder inside the tank should be Stainless Steel grade 304 .Supply of all materials and construction of 80mm thick, . thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber . Supply and fixing of inlet, outlet,overflow and washout pipe as per required dia with sluice valve and construction of sluice valve chamber with ll matterial and t&p etc all work complete. Three coats of approved quality and shade of Apex ultima exterior paint of approved quality over concrete work after one coat of putty including supply of all materials etc. Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material. All other details of tank not covered here shall also be as per specifications enclosed

110 mm dia

Provision for Inter Connections from old existing pipeline with new pipe line as per requirement & direction of Engineer Incharge Including Supply of all material, Labour T & P etc.

Interconnection with 90x90mm to 90mm x 110mm dia HDPE Pipe

Interconnection with 125x110 TO 140mm x 110mm dia HDPE Pipe

Interconnection with 160mm x 90 or110mm dia HDPE Pipe

Interconnection with 200mm DI x 90 or 110mm dia HDPE Pipe

Interconnection with 250mm DI x 90 or110mm dia HDPE Pipe

Interconnection with 300mm DI x 90 or110mm to 400mm DI x 110mm dia HDPE Pipe-

Interconnection with 450mm DI x 110mm to 500mm DI x 110mm dia HDPE Pipe-

Charges payable to N.H. PWD and State Highway Road for permission of crossing Roads. Payments made to contractor as per actual payment made to department

Charges payable to railway track crossing for permission .1 payments made to contractor as per actual payment made to department

Charges payable to railway track crossing for permission .2 payments made to contractor as per actual payment made to department

Construction of office building, rennovation of residential building and divisional office,shifting of store,and other work as per schedule G 2 attached in tender documents

Charges payable to railway track crossing for permission .3 payments made to contractor as per actual payment made to department

leakage repairing

House connection repairing

Existing house connection shifting

HOUSE CONNECTION

Making of House connection in follwing type of roads including fixing of saddle , ferrule 20mm , elbow in distribution line, fixing HDPE pipe (20mm) of 60cm length, providing elbow and fixing HDPE pipe upto house, fixing elbow and GI pipe which will be 75 cm above floor level of house(as per site condition) tap (brass) will be fixed with nipple of 15 cm inside the boundary of house.

Upto 110mm dia

For 125mm to 160mm dia

For 180mm to 250mm dia

For 300mm dia

For 350mm to 500mm dia

CC ROAD

Upto 110mm dia

For 125mm to 160mm dia

For 180mm to 250mm dia

For 300mm dia

For 350mm to 500mm dia

BITUMINOUS

Upto 110mm dia

For 125mm to 160mm dia

For 180mm to 250mm dia

For 300mm dia

For 350mm to 500mm dia

INTERLOCKING

Upto 110mm dia

For 125mm to 160mm dia

For 180mm to 250mm dia

For 300mm dia

For 350mm to 500mm dia

KACHHA

Upto 110mm dia

For 125mm to 160mm dia

For 180mm to 250mm dia

For 300mm dia

For 350mm to 500mm dia

BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD

Construction of Boundary wall 0.23 m thick and 1.5 m height with all materials, labour T&P etc. required for proper completion of work.

(1029) Ist class brick work in 1:6 cement and coarse sand mortar in foundation of boundary wall due to level gap in ground level and plinth level as per approved drawing including supply of all materials, labour, T & P etc. required for proper completion of the work.

12mm thick plaster with cement & local sand mortar in 1:6 over brick workminimum thickness not to be less than 10mm including supply of all materials, labour, T & P etc. required for proper completion of the work .

Applying putty in two coats ensuring smooth surface. including supply of all materials, labour, T & P etc. required for proper completion of the work.

emulsion (Apex paint) in two coats or approved shade. including supply of all materials, labour, T & P etc. required for proper completion of the work .

Dismantling of Existing plaster.

Dismantling of Existing brick work.

Construction of pillars as per type design including fixing of gate 3.6 m wide gate and 1.2 m wide wicket gate with all materials, labour T&P etc. required for proper completion of work.

3.60 m wide gate with wicket gate.

1.2 m wide wicket gate for pump house tube well 11

Construction of 25 cm thick CC road for approach road & water works campus with all materials, labour T&P etc. required for proper completion of work.

Construction of semi circular drain (250mm)sor 3179

Earth filling in water works campus with all materials, labour T&P etc. required for proper completion of work.

Provision of land scaping and arboriculture in campus as per direction of engineer in charge including all labour t&p etc complete

Supply and fixing of sign board. With CC

WATER RECHARGE UNIT

Provide all materials, labour, T&P Complete for establishment of water tapping arrengement from roof and Ground water recharge unit .

DISMANTLING OF EXISTING OVER HEAD TANK AFTER INSPECTION OF ANY GOVERNMENT TECHNICAL INSTITUTE

Dismantling of Over Head Tank of 250 KL/16m Staging from top dome till base of foundation including dismantling of overall RCC work, all down pipe, hand rail, reinforcement and disposal of scrap at proper place.

Dismantling of Over Head Tank of 340 KL/18m Staging from top dome till base of foundation including dismantling of overall RCC work, all down pipe, hand rail, reinforcement and disposal of scrap at proper place.

Dismantling of Over Head Tank of 340 KL/18m Staging from top dome till base of foundation including dismantling of overall RCC work, all down pipe, hand rail, reinforcement and disposal of scrap at proper place.

Dismantling of Over Head Tank of 700 KL/18m Staging from top dome till base of foundation including dismantling of overall RCC work, all down pipe, hand rail, reinforcement and disposal of scrap at proper place.

Dismantling of Over Head Tank of 2000 KL/16m Staging from top dome till base of foundation including dismantling of overall RCC work, all down pipe, hand rail, reinforcement and disposal of scrap at proper place.

REPAIR OF STAFF QUARTER

Dismantling of Existing plaster.

Dismantling of Existing brick work.

Ist class brick work in 1:6 cement and coarse sand mortar in foundation of boundary wall due to level gap in ground level and plinth level as per approved drawing including supply of all materials, labour, T & P etc. required for proper completion of the work.

12mm thick plaster with cement & local sand mortar in 1:6 over brick workminimum thickness not to be less than 10mm including supply of all materials, labour, T & P etc. required for proper completion of the work .

Applying putty in two coats ensuring smooth surface. including supply of all materials, labour, T & P etc. required for proper completion of the work.

emulsion (Apex paint) in two coats or approved shade. including supply of all materials, labour, T & P etc. required for proper completion of the work .

Varnishing in two coats or approved shade. including supply of all materials, labour, T & P etc. required for proper completion of the work .

Providing and laying vitrified floor tile (60cm x 60 cm) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make, in all colours and shades on 20 mm thick cement mortar 1:4 , jointing with grey cement slurry including grouting the joints with white cement and matching pigments etc. complete.

Suplly, Repairing & fixing of all electric fitting such as ceiling fan , switc & switch board, regulator,led bulb etc all complete.

Suplly, Repairing & fixing of all sanitary fitting such as water tank , wc sheat, cistern,bib cock in steel,angle walve etc all complete.

Repairing and fixing of door and windows.

STAFF QUARTER

Provide all materials, labour, T&P Complete for constructio of staff quarter as per departmental design and drawing

Ist class brick work in 1:6 cement and coarse sand mortar in foundation of pump house due to level gap in ground level and plinth level as per approved drawing including supply of all materials, labour, T & P etc. required for proper completion of the work.

REPAIRING OF 1500 KL/20M

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Supply and fixing of vertical down conductor of 32mm x 6mm copper strip etc. on approved clamps on surface for lightning conductor complete in all respects for five and above storeyed building ENM No. 714 ( c )

Painting of 1500 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of sluice valve. (200 mm to 500mm dia)

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Providing & fixing of murga Jali at OHT top doam

REPAIRING OF1210 KL/20M OHT SUB ZONE-9 A BIDHOLIYA CAMPUS

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Cleaning of Over Head RCC cylindrical wall Tank 1210 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Cement concrete pavement with 1:1:2 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. Dsr 11.7/2021

Painting of 1500 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Supply & Fixing of Over Head Tank Meter Gauge Indicator i/c S/F of plastic float ball (250 mm dia), brenzo wire (5mm dia) M. S. wire (2 mm dia) and Aluminium Pulley and OHT Meter Gauge Indicator refixing in position at site with M. S. Clamp with R.C.C.

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Making & Fixing beam and ventilator small coloum at OHT top doam for chiekn mass jaali complete of all work.

REPAIRING OF 1500 KL/20M OHT SUB ZONE-9 B SWALE NAGARCAMPUS)

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Painting of 1500 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Painting of 1500 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work.

Repairing of Over Head Tank (1575 KL/20M) IN central city sub zone 4

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Cleaning of Over Head RCC cylindrical wall Tank 2000 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes (200 pipe*12kg)

Cement concrete pavement with 1:1:2 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.

Painting of 1575kl/20 m staging cylindrical wall Oht with ultima apexverger paint in three coat over white washing including all labour , material and t&P complete.

25mm thick 1:2:4 P.C.C. Floor with cement, coarse sand and 20mm gauge stone ballast with base concrete (75 mm thick) 1:4:8 cement, local sand & brick ballast 40mm gauge.

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Repairing of sluice valve. (300 mm to 500mm dia)

REPAIRING OF 1000 KL/20M OHT SUB ZONE 5

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Cleaning of RCC Over Head Tank 1200 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge

Repairing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 11.13.1/dsr 2021

Painting of 1575kl/20 m staging cylindrical wall Oht with ultima apexverger paint in three coat over white washing including all labour , material and t&P complete.

Painting of 1000 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

Repairing and casting of stair, damage flight, beam, landing, OHT, bres beam, OHT Column & other repairing column & Staircase etc complete all work.

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Repairing of sluice valve. (300 mm to 450mm dia)

Repairing of Over Head Tank (1575 KL/20M) IN central city sub zone 4

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

REPAIRING OF 2000 KL/20M OHT ZONE 9 CI PARK

Painting of 1575kl/20 m staging cylindrical wall Oht with ultima apexverger paint in three coat over white washing including all labour , material and t&P complete.

Painting of 1000 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

Painting of 2000 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work..

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Repairing of sluice valve. (350 mm to 500mm dia)

REPAIRING FOR 910 KL/20M OHT

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Cleaning of Over Head RCC cylindrical wall Tank 2000 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Painting of 1575kl/20 m staging cylindrical wall Oht with ultima apexverger paint in three coat over white washing including all labour , material and t&P complete.

Painting of 1000 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

Painting of 910 kl/20 m staging R.C.C Oht with ultima apex/werger paint three coat over white washing including all labour , material and t&P complete.

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Repairing of sluice valve. (300 mm to 400mm dia)

REPAIRING OF OHT SUB ZONE 12- MODEL TOWN

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Cleaning of Over Head RCC Tank 1200 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Repairing ,providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Repairing and casting of stair, damage flight, beam, landing, OHT, bres beam, OHT Column & other repairing column & Staircase etc complete all work.

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Supply & Fixing of Over Head Tank Meter Gauge Indicator i/c S/F of plastic float ball (250 mm dia), brenzo wire (5mm dia) M. S. wire (2 mm dia) and Aluminium Pulley and OHT Meter Gauge Indicator refixing in position at site with M. S. Clamp with R.C.C.

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Painting of 1200 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

REPARING OF OVER HEAD TANK SUB ZONE 16- BIHARIPUR CIVIL LINES

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining clamps and M.S. staircase system in the scaffolding for working platform etc.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes (200 pipe*12kg)

Cleaning of Over Head RCC cylindrical wall Tank 1850 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Painting of 1575kl/20 m staging cylindrical wall Oht with ultima apexverger paint in three coat over white washing including all labour , material and t&P complete.

Painting of 1000 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

25mm thick 1:2:4 P.C.C. Floor with cement, coarse sand and 20mm gauge stone ballast with base concrete (75 mm thick) 1:4:8 cement, local sand & brick ballast 40mm gauge.

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Painting of 1850 kl/20 m staging R.C.C Oht with ultima apex/werger paint of three coat over white washing including all labour , material and t&P complete.

REPAIRING OF 1950 KL/20M OHT subhash nagar zone SUB ZONE 1

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Cleaning of Over Head RCC cylindrical wall Tank 1950 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge (DSR No. 14.78/21)

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (DSR No 13.9.1+13.23.1+13.21/18)

Painting of 1000 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

Repairing and casting of stair, damage flight, beam, landing, OHT, bres beam, OHT Column & other repairing column & Staircase etc complete all work.

Painting of 1950 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia) WITH GROUTING at pipe and dome.

REPAIRING OF 2100 KL/20M OHT SUB ZONE 3- SITHAURA CAMPUS

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Cleaning of Over Head RCC cylindrical wall Tank 1950 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge (DSR No. 14.78/21)

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Cleaning of Over Head RCC cylindrical wall Tank 2100 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge (DSR No. 14.78/21)

25mm thick 1:2:4 P.C.C. Floor with cement, coarse sand and 20mm gauge stone ballast with base concrete (75 mm thick) 1:4:8 cement, local sand & brick ballast 40mm gauge.

Painting of 2100 kl/20 m staging RCC OHT with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Supply & Fixing of Over Head Tank Meter Gauge Indicator i/c S/F of plastic float ball (250 mm dia), brenzo wire (5mm dia) M. S. wire (2 mm dia) and Aluminium Pulley and OHT Meter Gauge Indicator refixing in position at site with M. S. Clamp with R.C.C.

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Repairing of vertical D.I. K-9 pipe (200mm to 450mm dia as per site engineer) with grouting coat at pipe and dome joint.

REPAIRING OF 1150 KL/20M OHT ZONE 4- Madinath CAMPUS

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Cleaning of Over Head RCC cylindrical wall Tank 1950 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge (DSR No. 14.78/21)

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Cleaning of Over Head RCC cylindrical wall Tank 1150 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge (DSR No. 14.78/21)

Painting of 1150 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

Painting of 2100 kl/20 m staging RCC OHT with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

Repairing of sluice valve. (250 mm to 450mm dia)

REPAIRING OF 2000 KL/20M OHT SUB ZONE 6-JAGATPUR CAMPUS

Cleaning of Over Head RCC cylindrical wall Tank 1500 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge.

Cleaning of Over Head RCC cylindrical wall Tank 1950 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge (DSR No. 14.78/21)

12 mm cement plaster Cement plaster circular work 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Cleaning of RCC Over Head Tank 1200 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge

Providing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Cleaning of RCC Over Head Tank 2000 KL/20 mtr including disposal of slit & rubbish all as per direction of engineer in charge (DSR No. 14.78/21)

Repairing and fixing hand rail of approved size by welding etc. to ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.3 G.I. pipes

Cement concrete pavement with 1:1:2 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete for reconstruction & guniting after demolishing of damage of brace . Column ,balcony , dome part etc all Dsr 11.7/2021

Painting of 2000 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work..

Painting of 1000 kl/20 m staging R.C.C Oht with ultima apex/verger paint in three coat over white including all labour , material and t&P complete.

Painting of 2000 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work..

Repairing of sluice valve. (200 mm to 500mm dia)

Painting of 1210 kl/20 m staging cylindrical wall Oht with Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work

Supply & Fixing of Over Head Tank Meter Gauge Indicator i/c S/F of plastic float ball (250 mm dia), brenzo wire (5mm dia) M. S. wire (2 mm dia) and Aluminium Pulley and OHT Meter Gauge Indicator refixing in position at site with M. S. Clamp with R.C.C.

Repairing of vertical D.I. K-9 pipe (400mm, 250mm & 150mm dia)

25mm thick 1:2:4 P.C.C. Floor with cement, coarse sand and 20mm gauge stone ballast with base concrete (75 mm thick) 1:4:8 cement, local sand & brick ballast 40mm gauge. SOR 1202

E&M WORKS

Construction of Tubewell Size 300mm x 200mm - 31 Nos

Transportation of T/W Construction T&P Units

Transportation, Erection, Dismantling of Rig Machine and its T&P

Transportation, Erection, Dismantling of Compressor 250/350 PSI

Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test

Supply of Tubewell Assembly M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe as required upto 50% of plain pipes rings, well cap bail plug, clamp, reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. Note- Axial Length of Reducer without Ring shall be measured with casing pipe

300 mm dia M.S. Pipe

200 mm dia M.S. Plain/slotted

PEA-GRAVEL As per IS:4097

1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell

Drilling of bore by rig machine As Per IS :2800 Part I & II:

Drilling of bore by 600 mm dia bit GL to 50 mt. BGL.

Drilling of bore by 500 mm dia bit from 50 mt GL to 100 mt. BGL.

Drilling of bore by 500 mm dia bit 100 m BGL to 165 m. BGL.

Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:

Lowering of 300 mm dia M.S. Housing pipe from GL to 42 m.BGL

Lowering of 200 mm dia M.S. Plain/slotted pipe 42 m. BGL to 100 m. BGL

Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 150 m. BGL

Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.

Development and testing of tube well by Air Compressor.

Development and testing of tube Well O.P.Unit to yield sand free Discharge.

Chemical and Bacteriological test Analysis of water sample

Chemical and Bacteriological test Analysis of water sample

Logging of borehole by departmental/approved electric logger

Construction of Tubewell Size 300mm x 200mm - 31 Nos

Transportation of T/W Construction T&P Units

Transportation, Erection, Dismantling of Rig Machine and its T&P

Transportation, Erection, Dismantling of Compressor 250/350 PSI

Construction of Tubewell Size 200mm x 150mm - 2 Nos

200 mm dia M.S. Pipe

200 mm dia M.S. Plain/slotted

PEA-GRAVEL As per IS:4097

1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell

150 mm dia M.S. Plain/slotted

Drilling of bore by 500 mm dia bit GL to 50 mt. BGL.

Drilling of bore by 450 mm dia bit from 50 mt GL to 100 mt. BGL.

Drilling of bore by 500 mm dia bit 100 m BGL to 165 m. BGL.

Drilling of bore by 450 mm dia bit 100 m BGL to 140 m. BGL.

Lowering of 200 mm dia M.S. Housing pipe from GL to 42 m.BGL

Lowering of 150 mm dia M.S. Plain/slotted pipe 42 m. BGL to 100 m. BGL

Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 150 m. BGL

Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.

Development and testing of tube well by Air Compressor.

Development and testing of tube Well O.P.Unit to yield sand free Discharge.

Chemical and Bacteriological test Analysis of water sample

Chemical and Bacteriological test Analysis of water sample

Lowering of 150 mm dia M.S. Plain/slotted pipe 100 m. BGL to 110 m. BGL

Construction of Tubewell Size 300mm x 200mm - 31 Nos

Transportation of T/W Construction T&P Units

Transportation, Erection, Dismantling of Rig Machine and its T&P

Transportation, Erection, Dismantling of Compressor 250/350 PSI

Submission of design, dra

Supply of Tubewell Assembly M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe as required upto 50% of plain pipes rings, well cap bail plug, clamp, reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. Note- Axial Length of Reducer without Ring shall be measured with casing pipe

200 mm dia M.S. Pipe

200 mm dia M.S. Plain/slotted

PEA-GRAVEL As per IS:4097

1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell

Drilling of bore by rig machine As Per IS :2800 Part I & II:

Drilling of bore by 500 mm dia bit GL to 50 mt. BGL.

Drilling of bore by 450 mm dia bit from 50 mt GL to 100 mt. BGL.

Drilling of bore by 500 mm dia bit 100 m BGL to 165 m. BGL.

Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:

Lowering of 200 mm dia M.S. Housing pipe from GL to 42 m.BGL

Tubewell 300 x 150 = 2 Nos

Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 150 m. BGL

Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.

Development and testing of tube well by Air Compressor.

Development and testing of tube Well O.P.Unit to yield sand free Discharge.

Chemical and Bacteriological test Analysis of water sample

Chemical and Bacteriological test Analysis of water sample

Lowering of 150 mm dia M.S. Plain/slotted pipe 100 m. BGL to 125 m. BGL

Construction of Tubewell Size 300mm x 200mm - 31 Nos

Transportation of T/W Construction T&P Units

Transportation, Erection, Dismantling of Rig Machine and its T&P

Transportation, Erection, Dismantling of Compressor 250/350 PSI

Submission of design, dra

Supply of Tubewell Assembly M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe as required upto 50% of plain pipes rings, well cap bail plug, clamp, reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. Note- Axial Length of Reducer without Ring shall be measured with casing pipe

300 mm dia M.S. Pipe

200 mm dia M.S. Plain/slotted

PEA-GRAVEL As per IS:4097

1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell

Drilling of bore by rig machine As Per IS :2800 Part I & II:

Drilling of bore by 600 mm dia bit GL to 50 mt. BGL.

Tubewell 300 x 200 = 2 Nos

Drilling of bore by 500 mm dia bit 100 m BGL to 165 m. BGL.

Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:

Lowering of 300 mm dia M.S. Housing pipe from GL to 42 m.BGL

Drilling of bore by 500 mm dia bit 100 m BGL to 150 m. BGL.

Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 150 m. BGL

Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.

Development and testing of tube well by Air Compressor.

Development and testing of tube Well O.P.Unit to yield sand free Discharge.

Chemical and Bacteriological test Analysis of water sample

Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 135 m. BGL

Details of New Pumping Plant & Servo Voltage Stabilizer for subhash nagar zone

SITC of Submersible pumpset having capacity 2000/1500 LPM, 58 mtr Head, 35 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting, Toolset, Power wiring and electrificaton of pump house internal & external, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Soft Starter with RS485 Port-400V Class 30.0 kW for the above pumpset

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

Additional Column Pipe 3 mtr long

CE/UL certifeid Intelligent Smart Energy Meter

Moter Operated Actuater with Valves 150 mm size

Main Switch Incomer Panel

Actuator Panel

CE/UL Certifeid Electromagnetic Flow Meter 150 mm size

Auto Phase reversal unit with inbuilt delay and enclosure control panel etc.

CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewell

CE/UL certifeid Surge Protecter for control panel.

CE/UL certifeid Pressure Transmiter with local display

CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters

Complete cabling for tubewell such as all power and control cables of all equipment of pumphouse, OHT & LT Cable of suitable size from Transformer to Meter and Meter to Main Switch Incomer Panel including all required lugs etc material and Labour.

Control panel with IP54 protection ,industrial grade for all equipments.separate for control 24V and power equipment

Automatic Chlorination System compatible to SCADA Panels system

OHT equipments for subhash nagar zone

SITC OF CE/UL certifeid Radar Type level sensor with transmitter for OHT

SITC OF Control valve with Actuator of 450 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 450 mm

SITC OF Control valve with Actuator of 500 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 500 mm

Details of New Pumping Plant & Servo Voltage Stabilizer for North development zone

SITC of Submersible pumpset having capacity 2000 LPM, 58 mtr Head, 35 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset, Power wiring and electrificaton of pump

house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 2200 LPM, 58 mtr Head, , 40 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset, Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Soft Starter with RS485 Port-400V Class Suitable for the above pumpset

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

Additional Column Pipe 3 mtr long

CE/UL certifeid Intelligent Smart Energy Meter

Moter Operated Actuater with Valves 150 mm size

Main Switch Incomer Panel

Actuator Panel

CE/UL Certifeid Electromagnetic Flow Meter 150 mm size

Auto Phase reversal unit with inbuilt delay and enclosure control panel etc.

CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewell

CE/UL certifeid Surge Protecter for control panel.

CE/UL certifeid Pressure Transmiter with local display

CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

Control panel with IP54 protection ,industrial grade for all equipments.separate for control 24V and power equipment

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-60 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

OHT equipments for subhash nagar zone

SITC OF CE/UL certifeid Radar Type level sensor with transmitter for OHT

Control panel with IP54 protection ,industrial grade for all equipments.separate for control 24V and power equipment Must be provided with battery backup of complete panel for minimum 5 Hours.

OHT equipments for North development zone

CE/UL certifeid Electromagnetic Flowmeters for OHT.size 450 mm

CE/UL certifeid Electromagnetic Flowmeters for OHT.size 450 mm

SITC OF Control valve with Actuator of 500 mm dia size for OHT ,throtlled at any position at any instant, inbuilt with positioning card and panel

SITC of CE/UL certifeid Electromagnetic Flowmeters for OHT.size 500 mm

Details of New Pumping Plant & Servo Voltage Stabilizer for Trans Railway zone

SITC of Submersible pumpset having capacity 650 LPM, 58 mtr Head, 15 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 1500/1600/1700/1750/1900 LPM, 58/60 mtr Head, 35 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 1750/2250 LPM, 58 mtr Head, 40 HP Motor with 224 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 1000 LPM, 58 mtr Head, 22.5 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 800 LPM, 58 mtr Head, 17.5 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 2000/1500 LPM, 58 mtr Head, 35 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting, Toolset, Power wiring and electrificaton of pump house internal & external, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Soft Starter with RS485 Port-400V Class 15.0 kW for the above pumpset

SITC of Soft Starter with RS485 Port-400V Class 16.0 kW for the above pumpset

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-25 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

SITC of Soft Starter with RS485 Port-400V Class 30.0 kW for the above pumpset

SITC of Soft Starter with RS485 Port-400V Class Suitable for the above pumpset

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

Additional Column Pipe 3 mtr long

CE/UL certifeid Intelligent Smart Energy Meter

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-30 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

Moter Operated Actuater with Valves 150 mm size

Main Switch Incomer Panel

Actuator Panel

CE/UL Certifeid Electromagnetic Flow Meter 150 mm size

Auto Phase reversal unit with inbuilt delay and enclosure control panel etc.

CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewell

CE/UL certifeid Surge Protecter for control panel.

CE/UL certifeid Pressure Transmiter with local display

CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

Control panel with IP54 protection ,industrial grade for all equipments.separate for control 24V and power equipment

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-35 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

OHT equipments for subhash nagar zone

Moter Operated Actuater without Valves of 150 mm size

OHT equipments for Trans Railway zone

OHT equipments for North development zone

SITC OF Control valve with Actuator of 350 mm dia size for OHT throtlled at any position at any instant, inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT. size 350 mm

SITC OF Control valve with Actuator of 450 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 500 mm

SITC OF Control valve with Actuator of 450 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF Control valve with Actuator of 400 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 400 mm

SITC OF Control valve with Actuator of 250 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 250 mm

SITC OF Control valve with Actuator of 500 mm dia size for OHT ,throtlled at any position at any instant, inbuilt with positioning card and panel

SITC OF Control valve with Actuator of 200 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 200 mm

SITC of Submersible pumpset having capacity1600/2000 LPM, 58 mtr Head, 35 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 2000/1500 LPM, 58 mtr Head, 35 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting, Toolset, Power wiring and electrificaton of pump house internal & external, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 1750/2200/2250 LPM, 58 mtr Head, 40 HP Motor with24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Submersible pumpset having capacity 2500 LPM, 58 mtr Head, 45 HP Motor with 24 mtr Column Pipe Assembly NRV CIDF Bend 90° CF A/F Tee D/F Pipe 1.5 m long 2 No.s and 1 m long 1 No. Earthing, Painting Toolset Power wiring and electrificaton of pump house internal & external Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc.

SITC of Soft Starter with RS485 Port-400V Class 35.0 kW for the above pumpset

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA Input Voltage 230V-500V to Output Voltage 415V± 1% As per IS 9815-1994

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA Input Voltage Range 230V-500V to Output Voltage Range 415V± 1% As per IS 9815-1994

Additional Column Pipe 3 mtr long

CE/UL certifeid Intelligent Smart Energy Meter

Moter Operated Actuater with Valves 150 mm size

Main Switch Incomer Panel

Actuator Panel

CE/UL Certifeid Electromagnetic Flow Meter 150 mm size

Auto Phase reversal unit with inbuilt delay and enclosure control panel etc.

CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewell

CE/UL certifeid Surge Protecter for control panel.

CE/UL certifeid Pressure Transmiter with local display

CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-60 KVA Input Voltage 230V-500V to Output Voltage 415V± 1% As per IS 9815-1994

Control panel with IP54 protection ,industrial grade for all equipments.separate for control 24V and power equipment

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-65 KVA Input Voltage 230V-500V to Output Voltage 415V± 1% As per IS 9815-1994

OHT equipments for subhash nagar zone

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 450 mm

SITC OF Control valve with Actuator of 500 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Radar Type level sensor with transmitter for OHT

Control panel with IP54 protection ,industrial grade for all equipments.separate for control 24V and power equipment Must be provided with battery backup of complete panel for minimum 5 Hours.

SITC OF Control valve with Actuator of 400 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF CE/UL certifeid Electromagnetic Flowmeters for OHT.size 400 mm

Control panel with IP54 protection industrial grade for all equipments.separate for control 24V and power equipment Must be provided with battery backup of complete panel for minimum 5 Hours.

BASIC RATE In Figures To be entered by the Bidder Rs. P

Control panel with IP54 protection industrial grade for all equipments.separate for control 24V and power equipment Must be provided with battery backup of complete panel for minimum 5 Hours.

OHT equipments for Central City zone

For ALL ZONE

SCADA /AUTOMATION of New Tubewell & Existing Tubewell Pumping Plant

CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specifeid for tubewell to store and transmit data on GSM backbone RTU/PLC designed with logic to transfer data at multiple stations specifeid.

GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote site to control station all accessoreis included with signal enhancer antenna made for pumping plant internet charges as specifeid

SITC OF CE/UL certifeid Radar Type level sensor with transmitter for OHT

Replacement of Old oht valve for oht automation work

SITC OF Control valve with Actuator of 300 mm dia size for OHT throtlled at any position at any instant inbuilt with positioning card and panel

SITC OF Actuator with valve of 400 mm dia size for OHT with controlled throtlled at any position at any instant inbuilt with positioning card

SITC OF

Actuator with valve of 250 mm dia size for OHT with controlled throtlled at any position at any instant inbuilt with positioning card

SITC OF Actuator with valve of 150 mm dia size for OHT with controlled throtlled at any position at any instant inbuilt with positioning card

cuting of OHT delivery Pipe line for installation of actuated valve with welding work dewatering work required flanges D-joint etc with material T&P and labour charges

Dimolshing of old divisional record room and reconstruction of record room complete in all respect material and labour as per direction of engineer incharge.

SITC of Soft Starter with RS485 Port-400V Class 22.0 kW for existing submersible pump set

SITC of Soft Starter with RS485 Port-400V Class 30.0 kW for existing submersible pump set

SITC of Soft Starter with RS485 Port-400V Class 45.0 kW for existing submersible pump set

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-40 KVAInput Voltage 230V±500V to Output Voltage 415V± 1% As per IS 9815-1994

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVAInput Voltage 230V±500V to Output Voltage 415V± 1% As per IS 9815-1994

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-60 KVAInput Voltage 230V±500V to Output Voltage 415V± 1% As per IS 9815-1994

Supply, Installation and Commissioning of automatic servo voltage Stabilizer-75 KVAInput Voltage 230V±500V to Output Voltage 415V± 1% As per IS 9815-1994

complete double earthing work on all existing Tubewells with alumunium strip as per IER Guidelines to prevent HT Faults

Local Control Station

Desktop/PC with i5/i7 processor for as per spec mentioned in tachnical bid documents.

CE/UL Certified 3 KVA UPS with batteries as per spec mentioned in tachnical bid documents.

CE/UL Certified industrial grade LED Monitor with latest configuration 65'' size as per spec mentioned in tachnical bid documents.

Syncronization of scada work of new tubewells to existing scada software includingFull development of required TAGS SCADA Software at LCS as per spec mentioned in tachnical bid documents.

GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & receive data & gather data form remote sites to control station,All accessories include signal enhancer antenna along with running expences till DLP.

CE/UL certified Firewall for network protection.

Canon/hp Laser printer1018 or equivalent

Redevelpoment/Reinstatement of LCS Room with store,washroom including required furniture,internal wiring,PVC panelling of walls/false ceiling work etc.

Split AC suitable for the control room 1.5 tonnes with accessories & installation

POWER BACKUP OF OHT OUTLET VALVES ACTUATORS IN ALL ZONE

SITC of UPS of suitable capacity 3 KVA for operation of actuators installed at outlet line, in case of power failure at the time of distribution water supplywith cabinet

SITC of UPS of suitable capacity 5 KVA for operation actuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet

Charges for Trial and Run Period for all above istallation on all equipment of Tubewell, OHT, SCADA, LCS.