Repair and maintenance of Internal wiring and rewinding fans, geysers and allied works at MRS Anarwala under AGE E/M -II of GE Dehradun.

Amount

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as directed.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light/Exhuast fan point , controlled by one way switch.

One fan point , controlled by one way switch through Regulaor

One bell point , controlled by bell push switch.

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

One two way light point controlled by two two way switch

Add to item no 2.01 here-in-before for each additional light point on the same switch circuit.

All as per Item No 2 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through existing steel/PVC conduit including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly and making good disturbed surfaces etc complete all as specified and directed by Engr.-in-charge of following. Note :(i) The wiring to be done as per IE rule and maintain colour code accordingly.

One light/Exhuast fan point , controlled by one way switch.

One fan point , controlled by one way switch through Regulaor

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

One bell point , controlled by bell push switch.

One two way light point controlled by two two way switch

All as per Item No 4 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including factory made MS pressed modular metal flux boxes with GI coating incl modular combined cover plates as top cover for 1 to 8 module as per site reqmt for mounting of Modular switches, sockets, Bell push, fan regulators etc and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc as per existing one complete all as specified and directed by Engr.-in-charge of following. Note :(1) The wiring to be done as per IE rule and maintain colour code accordingly.(2) The item rate includes for moduler boxes & moduler combined cover plates .

One light/Exhaust point , controlled by one way switch.

One fan point , controlled by one way switch through Regulaor

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

One bell point , controlled by bell push switch.

All as per Item No 6 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & Fix Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & Fix Switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed.

S & Fix i Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as directed.

S & Fix bell push flush type 5 Amps 230 Volts single pole complete all as directed.

Supply and fix Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fix Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified.

S & Fix calling bell ding dong type AC 230 Volt single pole complete all as specified.

S & Fix in repairs for step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified.

Supply and fix Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified.

S & Fix Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting complete all as specified.

S&F moduler switch piano flush, button type 6 Amp SP one module one way complete all as specified Make : Legrand model Arteor, Cat No 573400 eqvt in L&T model entice/ Havells model Murano.

S&F moduler switch piano flush button type 16/ 20 Amps SP one module one way complete all as specified Make : Legrand model Arteor Cat No 573410 eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet multipurpose 2/3 Pin 6 Amp two module complete all as specified & directed. Make : Legrand model Arteor eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet two in one three pin 6 Amp and 16 Amp two module flush type complete al as specified. Make : Legrand model Arteor Cat No 573471 eqvt in L&T model entice/ Havells model Murano.

S&F moduler bell push 6 Amp one module one way complete all as specified. Make : Legrand model Arteor Cat No 573413 eqvt in L&T model entice/ Havells model Murano.

S&F 4 step modular electronic fan regulator ,120 watt ,flush type 2 module.Make : Legrand model Arteor Cat No 573469 eqvt in L&T model entice/ Havells model Murano.

Removing /Refixing of LED tube light fittings / LED fancy light fittings of any make or capacity carefully complete (taking down included ser item no 1) all as specified and directed by Engineer-in-charge

S&F in replacement mirror light decorative compact luminarious with decorative ends caps 10Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make Philips cat pt no BN021LED10S-6500 PSU GRS1 OR Eqvt in Havells/CG/Eveready.

S&F decorative gate fancy lights made up of high grade unbreakable polycarbonate material including LED lamp B-22 base upto 1 no x 20 watt LED lamp mounting pole dia 60 mm ( maximum) OD including fixing arrangement including taking out unserviceable gate fancy fittings complete all as specified and directed. Make : Havells or equivalent in wipro / philips / Eveready.

S&F in replacement wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No BN 021 C LED 20 S PSU CW GR S2 /Havells ENDURALINEARNEOBS20W LED840SPCWH / Wipro LL20-281-XXX-65AL1 or equivalent in Eveready

S&F in replacement of LED tube rod 20/22 Watt sigle or double side connectors polycarbonate complete incl making connections,alteration in existing tobe light fittings complete all as specified and directed

S&F in replacement of Decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, suitable for 9- 15 Watts LED Lamp complete all as specified and directed by Engineer-in-charge Make : Havells (City-1) cat part No LHDL02160099 (Fitting) /Mepro cat no AL-170 or equivalent in Eveready.

S&F in replacement of Surface mounted general purpose square shaped luminare with low height CRCA housing and high transmitivity diffuser suitable for office application,LED 32 watt,6500K in White & gray housing with profiled & flat diffuser all as specified and directed by Engineer-in-charge Make : Philips cat no SM365C LED32-6500PSUODGR/WH OR Equivalent in wipro/Havells/Eveready

S&F in replacement of fully diffused recessed mounted 2'x2' LED luminaire with UGR<19, for Full Glow Office Complaint indoor spaces,LED 36 Watt ,6500K in White & gray housing with profiled & flat diffuser all as specified and directed by Engineer-in-charge. Make : Philips cat no RC 380B LED36S-6500G6L60W60PSUODOC OR Equivalent in wipro/Havells/Eveready

S&F in replacement Industrial lighting ,70 Watt with Eco well glass in PDC housing with luminaire efficiency of 110 Lm/W, Superior tampered fin design with fin design with exceptional thermal management , ingress protection of IP 66 complete all as specified and directed Make : Crompton greaves model no Supra neo -II(T) ,Cat pt No TIP -311-70-57-SL-CP-NSG or Equivalent in Philips/Havells/Eveready

S&F in replacement of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge. Make : CG cat LBHP-10-CDL/Philips WT140W LED7S CW PSU S1 PC/Havells ENDURA RUGBYNEO N /Mepro cat no BCL 23 Plain or Equivalent in Eveready.

Supply and fixing in replacement of Busbar chamber of size 600x315x214 mm or higher size with PVC hinged lid suitable for and mounting arrangement for fixing of MCCB 4 pole, 100/125 Amps 25 KA (Icu=100%Ics) 415 Volt,50 Hz, duly connected with and incl 04 Nos of copper Busbar 300 Amps fixed on epoxy insulators, Gun metal cable gland of 25 Sqmm 01 No and PVC coupler for sub main wires 04 Nos complete Polycarbonate type (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, flame retardant,complete all as directed at site by Engr in charge or his rep complete. Note:- Only MCCB shall be measured and paid for seperately all other items incl connection from MCCB to busbar with suitable size copper wire incl thimble, bottle lugs etc are incl in item rate. Make:- Hensel cat No Mi 9410 or ABB/Sintex /Universal/Schneider

S&F Meter Distribution board made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04/6 Nos incuding electrical connection with existing system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed. Make Hensel cat part no Mi0800 / Secure/Sintex

Removing & Refixing Electronic Meter carefully to existing position or new location including electric connection duly marked qtrs Nos on EM complete all as specified & directed.

S&F in replacement Tamper Proof electronic single phase two wire whole current energy meter (LCD Display) 10 Amp to 60 Amp, 240 volt AC supply, push to fixed type box duly marked with qtr Nos including cable connection, proper sealing with lead. The meter shall comply with the latest version of IS-13779 with atleast 2 anti tamper LED indication of line load reversal and earth loading indication. The meter shall work satisfactory with guarantee accuracy as per limit of IS-13779, complete all as specified and directed. (Note: Old U/S Meter shall be deposited to E/M store yard). Make:- L&T/ HPL/ Legrand/ SECURE/ BHEL.

Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make Make:- Legrand/L&T /C&S/Havells

Supply and fixing in replacement for Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make Make:- Legrand/L&T /C&S/Havells

Supply and fixing in replacement for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 100 to160 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection complete. Note:- DB and MCCB/MCB shall be of same make and paid separetaly Make:- Legrand/Havells/L&T /C&S

Supply and fixing in replacement for Distribution Box MCB Protected Socket with steel sheet enclosure 20 A MCB DBOXX Combo DP including PLUG TOP all as specified & directed. Make : Legrand/L&T /C&S/Havells

Supply and fix in repairs MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

S&F in repairs MCB single pole 240 volt, 10 KA, 5-32 Amp, 'B' series confirming to IS complete all as specified and directed.

S&F in repairs MCB SPN 240 Volt 10 KA 20 to 32 Amp 'B' series conforming to IS complete all as specified & directed.

S&F in repairs MCB SP 240 Volt 10 KA 40 Amp 'B' series conforming to IS complete all as specified & directed.

S&F in repairs MCB 415 Volt, TPN, 10 KA 40- 63 Amp 'B' series conforming to IS complete all as specified & directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed. (Note: Two run 4 sqmm and one run 4 Sqmm and one run condiut with accessories shall be measured as one run).

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing into existing conduit including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed. (Note: Two run 4 sqmm and one run 4 Sqmm shall be measured as one run).

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed. (Note: Two run 6 sqmm and one run 6 Sqmm and one run condiut with accessories shall be measured as one run).

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing into existing conduit including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed. (Note: Two run 6 sqmm and one run 6 Sqmm shall be measured as one run).

M&L for sub main wiring with 3 Single core(R,Y,B Phase) PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in including 25mm or higher medium duty PVC concealed conduit/flexible conduit where reqd & all conduit accessories and fitting inclu one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed. (Note: Three run 6 sqmm and one run 6 Sqmm and one run condiut with accessories shall be measured as one run).

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

M&L for replacement of unserviceable earthing with Copper electrode chemical advance maintenancefree chemical gel earthing electrode 50mm dia thick buried directly in ground vertically to a depth not less than 2.10 mtr below ground level filled with highly conductive metalic compound mixture CCM with the permanent sealing of the both end, outer dia pipe 50mm with strip terminal 50x6 with terminal holes incl one bag 25 kg of bfc compound, earth connected with earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board protected by galvanized iron pipe medium 15 mm bore, PVC chamber as per manufacturer instruction and testing on completion. Note: (i) Earthing has to done by CPRI approved firm and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of Copper wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Supply & Laying in replacement of old service cable XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 35 Sqmm 3.5 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge. Make: Havells/Polycab/Glandlay

Supply & Laying in replacement of old service cable XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 16 Sqmm 4.0 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge. Make: Havells/Polycab/Glandlay

Supply & Laying in replacement of old service cable XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Sqmm 2 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge. Make: Havells/Polycab/Glandlay

Excavation in trenches not exceeding 1.5m and not exceeding 1.5 m in depth for laying of electric cableand getting out in any type of soil, complete all as specified and directed by Engr -in-charge

Returning, filling in excavated soil , including leveling,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr -in-charge

Removing excavated material(soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above & starting point complete all as specified and directed by Engr-in-charge.

M&L for sand cushioning in trenches for protection of UG cable with river based sand laid dry in trenches before and after laying of cable, incl well ramming complete all as specified and directed

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

Supply & Fixing in replacement building security light fitting LED type 45 Watt of dia-cast IP 66 aluminium housing, 45 Watt, LED 6000K lence type toughened glass having seprate surge protector 10 KV , efficiecy of minimum 100 lumens /watt, incu adobter if any , prewired complete incuding 40/32 dia GI Light grade for bracket of fitting as reqd up to 1.2 RM proper shaped , bended (120 degree) threaded & drilling holes for wire entry & MS clamps made out of flat iron of suitable size incl painting all as specified & directed Make : Crompton cat no LSTP-45-CDL or equivalent in Wipro/Havells/Eveready

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store/site, removing capacitor carefully for overhauling checking serviceability of bearings/bush, winding etc cleaning the fan ,oiling,greasing,soldering the winding connection with sleeves where reqd and reassembling the same after replacing the unserviceable parts such bearings,bushes (To be paid under relevant items separately as supply only), testing the same, hanging ceiling fan connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-Charge .

Fixing only repaired or new exhaust fan/new ceiling fan any sweep and connecting with flexible white 3 core PVC insulated copper multistranded conductor 23/0.0066 up to the ceiling rose.complete all as specified and directed

Rewinding of ceiling fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 1200 mm sweep.complete all as specified and directed

Rewinding of ceiling fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 1400 mm sweep.complete all as specified and directed

Rewinding of Exhaust fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 300 mm sweep.complete all as specified and directed

Rewinding of exhaust fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete upto 380/450 mm sweep.complete all as specified and directed

Supply only ball bearing No. 6201to 6204 for 1200/1400mm ceiling fans & 300/380/450mm exhaust fan as required at site complete all as specified and directed. Make:- SKF/TATA/NBC.

Supply only GM bush for 1200/1400 mm sweep ceiling fan as required at site.complete all as specified and directed.

Supply only GM bush for 450/350/300/230mm sweep exhaust fan as required at site.complete all as specified and directed.

Supply & fixing heavy duty rubber insulator for 1200/1400 mm sweep for hanging ceiling fan.complete all as specified and directed

M&L for painting to ceiling fans complete in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified.

Supply & fixing fan capacitor 2.5 mfd complete all as specified and directed. make universal / Havells/Epcos .

Supply & fixing fan capacitor 3.15 to 4 mfd complete all as specified and directed. make universal / Havells/Epcos

S&F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI of suitable size as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin heavy duty complete all as directed.

S&F MS hook made out of suitable size flat/ angle iron duly painted as per site requirement for hanging of ceiling fan complete all as specified and direceted.

Supply & fixing Split pin heavy duty for ceiling fans complete all as specified and directed.

Supply & Fixing PVC flexible cable twin core twisted of size 23/0.0076 copper multistranded conductor PVC insulated complete all as specified and directed. Make : KEI/Havells/poly cab.

Supply & Fixing PVC canopy suitable for any make ceiling fan 1200/1400 mm complete all as specified and directed

Supply and fixing of louvers shutters round or squire made out of GI sheet heavy duty of suitable size upto 300 mm dia sweep exhaust fan incl taking out old u/s louvers complete all as specified.

All as per item No 81 here-in-above but louvers shutters suitable for 450 mm sweep exhaust fan .

Disconnecting and taking down existing unserviceable geyser of any description & capacity (25/50 Ltr) incl water and electric connectoins and reinstallation at same locations after repairs,cleaning and descaling complete all as specified and directed (Note : spare parts shall be measured and paid separately under relevent item of schedule)

Supply only flange assembly (siphon)for 25/50 ltr cap storage type geyser and any type of hole (6/7/9) all complete with safety valves as per existing make & size as per site requirement complete all as specified and directed

Supply only circular ring gasket as required of different make complete all as specified and directed.

Supply only bottom split plate for 50/25 capacity geyser as per site requirement and made out of 20 guage MS sheet duly painted complete as required of different make all as specified and directed

Supply & fixing in replacement of water heating element any type (traingular/cup/box) of any size as per site requirement of capacity up to 2 KW (ISI Marked) make : theta/newton/bajaj/recold

Supply & fixing in replacement of thrermostate of any type for any make of geyser as per site requirement temp setting on 60 degree centigrade ISI marked , Make :theta/newton/bajaj/recold

Supply & fixing in replacement of water supply PVC flexible connection nylon braided with suitable threaded check nut with washer complete suitable for hot & cold water 15 mm dia (heavy duty) along with threaded brass nuts and washers 45 cm long complete all as specified & directed Make: Crompton/Havells/Prayag

S&F Fusible plug made out of brass and lead as per existing make and size complete all as specified & directed

Supply & fixing indication lamp (Green/Red) as required complete all as specified and directed

S&F for PVC insulated and sheathed flexible wire of 3 core with copper conductor of size 4 sqmm round type for geyser complete all as specified. (Make: KEI/polycab/Havells)

M&L for painting to geyser complete in site by scraping / removing old spray paint with brush/emery paper and spray painting with two coat of synthetic enamel paint of white colour and making MES number with synthetic enamel paint of black colour in good and proper size complete all as directed by Engr-in-Charge.

Taking down old unserviceable leakage geyser & fixing only serviceable or new water storage electric geyser of capacity 25/50 ltr with suitable fitting arrangement by suitable size of bolts/nuts & washers or pvc gutties & metal screws as reqd at site and connecting up with electric and water supply complete and old unser geyser to be deposited to Anarwala E/M store yard complete all as specified & directed

S&F in replacement GI tubing medium grade 15 mm dia with all fittings and fixed to wall, ceiling or roof under floor complete all as specified and directed.

S&F in replacement GI nipple of size 15X75mm ISI Marked complete all as specified and directed.

S&F in replacement GI nipple of size 15X150 mm ISI Marked complete all as specified and directed.

S&F in replacement GI union 15mm dia ISI Marked complete all as specified and directed.

S&F in replacement stop cock brass (CP) of 15mm dia complete all as specified and directed.

S&F in replacement bib tap brass (CP) of 15mm dia complete all as specified and directed.

S&F Plug Top , 3Pin ,15 A with indicator, ISI Marked complete all as specified and directed. Make : Legrand/Anchor/Havells

S&F Metal Plug , 240V,20 A,2P+E suitable for Geyser's DB Enclosure complete all as specified and directed. Make-Legrand/Anchor/Havells

S&F Metal Socket , 240V,20 A,2P+E with blue cap suitable for Geyser's DB Enclosure complete all as specified and directed .Make-Legrand/Anchor/Havells

S&F Air termination ,single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

Fixing only Air termination ,single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

S&F Aluminium strip of size 25x3.15 with new saddles/backelite insulators, screws etc for roof conductor and down conductor above the ground of same location or any location and making good the disturbed surfaces complete all as specified and directed after taking down old unserviceable wear & tear Aluminium strip of same size.

Fixing only Aluminium strip of size 25x3.15 with new saddles/backelite insulators, screws etc for roof conductor and down conductor above the ground of same location or any location and making good the disturbed surfaces complete all as specified and directed after taking down old unserviceable wear & tear copper strip of same size.

Fixing only of GI strip 32x6.00mm with new saddles/backelite insulators, screws etc for roof conductor and down conductor above the ground of same location or any location and making good the disturbed surfaces complete all as specified and directed after taking down old unserviceable wear & tear copper strip of same size.

S&F GI strip 32X6 mm as earth continuity or main earthing lead fixed to wall on batten or reccess or chases or fixed on saddles/backalite insulators, screws etc or buried in ground or drown in conduit/ pipe or fixed to poles or any others indicated situation for loop earthing etc as required after taking down old unserviceable wear and tear GI Strip of same size.

M&L for test point terminal box made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal heads screw after taking down old unserviceable test point terminal box.

Fixing only test point terminal box made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal heads screw after taking down old unserviceable test point terminal box.

S&F for DK Thermoplastic cable Junction boxes of size 167x125x82 mm,IP 65 with made out of two nos alum busbar fixing with DMC insulator for termating with incoming & outgoing GI/AL earthing strips fixed on wall /pole with suitable size of fixing arrangements by means og clamp etc all as specified & directed Make: HENSAL/SINTEX for JB or as approved by GE.

M&L for 40 mm dia steel tubing ( light grade ) galvanized with fittings laid in trenches/ wall/roof for protection of earthing / lightning strips for crossing the roads / fixing on walls etc complete all as specified and directed as in repair.

Fixing only 50 mm / 40 mm dia steel tubing ( light grade ) galvaanized with fittings laid in trenches/ wall/roof for protection of earthing / lightning strips when crossing the roads / fixing on walls etc complete all as specified and directed as in repair.

M&L for cement concrete 1:3:6 type C2 using 40 mm grade stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

Demoliton of reinforced cement concrete of any description and in any position not otherwise specifically ptovided for complete all as specified and directed. .

Demoliton of cement concrete of any description and in any position complet all as directed.

M&L for cement cocrete (1:2:4)type B1 using 20 mm graded stone aggregate as in bed block, benching etc including necessary formwork complete all as specified and directed.

M&L for RCC slabs type B1 (1:2:4) 20mm grade aggregate as in slabs supported on wall, beams etc including necessary form work complete all as directed.

M&L for deformed or twisted TMT bars of quality Fe-415 grade conforming to IS ; 1786 of 6 to 8mm dia cut to length bent to shape required ,including cranking ,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less then 0.9 mm dia or securing with clips,complete all as directed.

M&L for Mild steel work with angle iron of size 20mmx20mmx3mm of 50 cm long and 2mm thick mild steel plain sheet as in display board etc including writing letters of size 20cmx15cm fixed over PCC block of (1:2:4) type B1 of size 200mmx200mmx200mm etc on ground complete all as specified & directed by Engr in Charge. ( Note :- PCC,Painting to complete structure, letter writing works and necessary earth work shall be measured & paid separately under respective items of schedule.)

M&L for applying two coats of synthetic enamel paint over a coat of red oxide preimer incl preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified.

M&L for writing letters or figures with synthetic enamel paint of approved colour ( Block, Roman, Italic, or Indian ) n.exc 30 cm high complete all as specified and directed.

Repair to Electric meter box by fixing of box cover with welding or replacement of damaged hinges ,replacement of broken/disappear glass by replacement of clear transparent glass of suitable size and fixing with proper manner and reparing/changing of cover fixing arrangement as per existing one including painting with two coat of supper enamelled paint over one coat of primer after cleaning dust,oil ,grease etc by scrapping of outside &inside of meter box of size 75x60x20 cm complete all as specified and directed

Repair to Electric meter box by fixing of box cover with welding or replacement of damaged hinges ,replacement of broken/disappear glass by replacement of clear transparent glass of suitable size and fixing with proper manner and reparing/changing of cover fixing arrangement as per existing one including painting with two coat of supper enamelled paint over one coat of primer after cleaning dust,oil ,grease etc by scrapping of outside &inside of meter box of size 120x100x20 cm complete all as specified and directed. Note- Materials taken as " supply only" in the BOQ shall be supplied and deposited to MES store yard of Engineer-in-charge and taken on ledger charge by him and shall be issued on proper issue voucher solely for the purpose of repair/ maintenance under this contract only.

M/s badrinath Traders

M/S Garhwal Enterprises

M/s Kamal Traders