Miscellaneous Engineering works of Zone A for the year 2026 to 2028 i.e.2 Years.

Earth work excavation in all kinds of soil excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m etc., as required and as directed by Engineer-in- Charge complete.

Surface dressing in all kinds of soil of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m etc., as required and as directed by Engineer-in-charge, complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift etc., as required and as directed by Engineer-in-charge, complete.

Supplying and filling in plinth with manufactured sand derived from Recycled concrete aggregate (RCA) under floors, including watering, ramming, consolidating and dressing etc., as required and as directed by Engineer-in-charge, complete.

Open timbering in trenches depth exceeding 1.5 m but not exceeding 3 m including strutting and shoring etc., as required and as directed by the engineer-in-charge, complete. All labour and materials.(Measurements to be taken of the face area timbered)

Earth work in all kinds of soil excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift etc., as required and as directed by the Engineer-in-charge, complete.

Excavation work in ordinary rock by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils, within a lead of 50 m etc., as required and as directed by the Engineer-in-charge, complete.

Pumping out water caused by springs, tidal or river seepage, broken water mains or drain etc. including hire of pumpset, operator, man mazdoor, hoses, priming/fuel/consumables, leads, lifts and all incidental works etc., as required and as directed by the Engineer-in-charge. complete

Providing 10 cm thick approved type grass turfing to the slopes of including cost of all materials, labour, watering for minimum 15 days with lead 50 m and all lifts etc., as required and as directed by the Engineer-in-charge, complete.

Felling trees of the girth beyond 30 cm girth upto and including 60 cm girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material etc., as required and as directed by the Engineer-in-charge, complete.