Loading
Loading…
Loading…
Tender Value
₹4.8 Cr
EMD Value
₹9.5 L
Closing Date
30 Sept 2026, 3:00 pm
EXECUTIVE ENGINEER BUILDING DIVISION ARWAL
EE
EXECUTIVE ENGINEER
Superintending Engineer, BUILDING CIRCLE GAYA
SE
Construction of Excise Office/Malkhana/ Hazat/ Barrack (Male/Female) and Boundary Wall at Distt. ARWAL Yr.26-27
139480
04/ARWALBCD/26-27
Open Tender
CIVIL
Arwal
• Description
Bid Security Amount in Rupees(A) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given.16.1Total Bid Security Amount in Rupees Rs. 9,53,500.00
• (i) Legal Status of Bidder 4.3(a) (ii) Place of Registration. (iii) write Principal place of Business(iv) Power of attorney of signatory Bid 4.2(iv)
• Total value of civil engineering construction work, in Rupees, Performed in last five years. Minimum annual financial turnover (in all classes of civil engineering construction works only) amount of construction work ,which must be at least equal to 50 % of estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year 4.5(A) (a) 2021-2022, 2022-2023
,2023-2024, 2024-2025, 2025-2026
• Amout in Rupees related to Work Experience of Similar natureSatisfactory completed at least one similar work of value not less than 50% of estimated Cost4.5(A) (b)
• Executed in any one year, the minimum quantities /amount of the following items of work (units shall be same as in Requirement column)
.SL. No Item Unit50% of Quantity Amount
1 EARTH WORK 735.00 cum
2 SAND FILLING 526.89 cum
3 BRICK WORK 391.00 cum
4 PCC / RCC 448.00cum
5 STONE & TILES FLOORING 957.35 sqm
6 PHE WORKS 4,17,310.00 Rs.
7 Furniture Work 15,40,751.00 Rs.
8 Electric Work 26,80,895.00 Rs.
9 Fire Fighting Work 4,05,909.00 Rs
• (a) Amount of Existing commitments and ongoing works in Rupees Sec 2-1.4(A)(b) Amount of Work for which Bid already submitted, in Rupees Sec 2-1.4(B)
• Numbers and Maximum age of Equipments with bidder Type of Equipment Nos. Maxm. Age Sec 2-1.5
Concrete Mixer with Integral weigh Batching facility 5 1
Vibrator (Plate & Niddle ) 5 2
Water Tanker 5 1
Steel shuttering 5 2000sft
REFER SBD
• Name of the Personnel and Experince in years and Select from drop down listPersonnel / Qualification4.5(B) (b)
Site EngineerB.E. (Civil) + 03 Years Exp. (3 years in Building Construction) or Diploma in Civil + 7 year Exp. In Building construction or retired A.E.1 No
Site SupervisorFresh Graduate in Civil or Diploma Civil + 02 Years Exp. or retired I.T.I Holder.1 Nos
REFER SBD
• Evidence of accesses to Financial Resources in RupeesEvidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (for work under this bid). 4.2(i)
• Proposed methodology and programme of construction Select from drop down list the proposed methodology and programme of construction, backed with equipment planning and deployment4.3(l)
• Litigation History. Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not)4.3(j)
• Affidavit Regarding statements made in the required attachments are true and correct.Sec-2, Affidavit
• Undertaking Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract.Sec-2, Undertaking
• Time of Completion in monthsAS PER NITRegistration No.IT.& ST Registration & clearance CertificateLabour License
• Character CertificateNOC for Debar (If required)
CIVIL
PERCENTAGE
L1
1
13 documents required · 13 mandatory
₹10,000
Processing Fee: 11800
₹9.5 L
SE/ GAYA JI @ 12.09.2026
8 Sept 2026
8 Sept 2026
30 Sept 2026
8 Sept 2026
30 Sept 2026
8 Sept 2026
12 Sept 2026
BILL OF QUANTITY
BUILDING DIVISION ARWAL
Name of Work:- BOQ For Construction of Excise Office/Malkhana/ Hazat/ Barrack (Male/Female) and Boundary Wall at Distt. ARWAL Yr.26-27
Estimated Cost :- 47659844 BOQ issued to:-
Earnest Money :- Address :-
Cost of B.O.Q :- Reg. No :-
Time of Completion :-
Date of tender :- Signature of issuing of
Sr.No. S.O.R CODE NO. ITEMS OF WORK Main Building Water Supply Septic tank Big Septic tank Small Soak Pit Boring B/W Main Gate App. Road Furniture Fire fighting RWH QUANTITY UNIT RATE AMOUNT Main Building Water Supply Septic tank Big Septic tank Small Soak Pit B/W Main Gate
1 0L01 Providing Labour for Cleaning the site & Uproofing Small Trees etc. 10 10.00 Nos 355.40 3554.00 3554 0 0
2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil 1113.71 34.83 15.93 5.78 249.364 41.796 8.92 1470.33 cum 360.70 530348.00 401715 0 12563.181 5745.951 2084.846 0 #REF! #REF! 0
3 2.25a Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. 1852.3 1852.30 cum 411.70 762592.00
4 2.27.1 Extra for every additional lift of 1.5 m or part thereof in : All kinds of soil. 272.19 272.19 cum 49.40 13446.00 13446 0 0 0 0 0 #REF! #REF! 0
5 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 668.23 668.23 cum 123.90 82794.00 82794 0 0 0 0 0 #REF! #REF! 0
6 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 933.81 2.18 1.06 27.436 3.49 84.96 0.83 1053.77 cum 287.30 302747.00 268284 0 626.314 304.538 0 0 #REF! #REF! 24409.008
7 11.72 Providing designation 100 A one brick flat soling joints filled withn local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 1094.657 26.06 1120.72 sqm 283.30 317499.00 310116 0 0 0 0 0 #REF! #REF! 0
8 11.72 derived Providing designation fly ash brick flat soling joints filled withn local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 0 13.01 6.41 182.791 0.00 8.76 210.97 sqm 290.04 61190.00 0 0 3773.4204 1859.1564 0 0 #REF! #REF! 0
9 11.73 derived Providing designation fly ash brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 557.62 557.62 sqm 450.21 251047.00
10 11.79.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern. 148.70 148.70 sqm 956.40 142216.00
11 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 2.18 0.96 3.14 M3 4420.80 13881.00 0 0 9637.344 4243.968 0 0 #REF! #REF! 0
12 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 70.643 8.009 1.54 80.19 cum 3998.10 320600.00 282438 0 0 0 0 0 #REF! #REF! 0
13 4.1+4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:3:6(1 Cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) 0.93 0.93 cum 3434.00 3194.00
14 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 0.37 0.37 cum 4688.30 1735.00
15 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete 1.36 0.67 0.24 2.27 cum 4756.90 10798.00 0 0 6469.384 3187.123 1141.656 0 #REF! #REF! 0
16 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to accelerate,reinforcement,durability as per direction of Engineer-in-charge. All work upto Plinth level 310.49 75.548 10.474 396.51 cum 5063.40 2007697.00 1572135 0 0 0 0 0 #REF! #REF! 0
17 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work above Plinth level upto floor V Level. Concrete of M-25 grade with minimum cement content of 330 kg/cum 378.062 29.026 4.736 411.82 cum 5863.20 2414608.00 2216653 0 0 0 0 0 #REF! #REF! 0
18 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1.:6 (1 cement: 6 coarse sand ) 2.82 2.82 cum 4819.90 13592.00
19 6.1.12C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:4 (1 cement: 4 coarse sand ) 75.46 10.19 5.9 2.57 94.12 cum 5116.30 481522.00 386051 0 52135.097 30186.17 13148.891 0 #REF! #REF! 0
20 6.1.12C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:4 (1 cement: 4 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 25.65 120.195 145.84 cum 5958.50 869015.00 152836 0 0 0 0 0 #REF! #REF! 0
21 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks) 205.214 205.21 sqm 113.60 23312.00 23312 0 0 0 0 0 #REF! #REF! 0
22 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand )Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 539.09 1.138 540.23 cum 5765.20 3114522.00 3107962 0 0 0 0 0 #REF! #REF! 0
23 13.11.1+ 13.26 Cement plaster in course sand 12 mm cement plaster of mix: 1:3 (1 cement:3 coarse sand) Neat cement punning 77.24 44.15 121.39 M2 204.80 24861.00 0 0 15818.752 9041.92 0 0 #REF! #REF! 0
24 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 5.15 5.15 M2 203.60 1049.00
25 13.11.2 Cement plaster in course sand 12 mm cement plaster of mix: 1:4(1 cement :4 coarse sand) 3.31 553.259 556.57 M2 152.90 85099.00 0 0 0 0 506.099 0 #REF! #REF! 0
27 13.11.4 12 mm cement plaster of mix:1:6(1 cement :6 coarse sand) 2087.5 2087.50 sqm 141.50 295381.00 295381 0 0 0 0 0 #REF! #REF! 0
28 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 1005.83 1005.83 sqm 125.60 126332.00 126332 0 0 0 0 0 #REF! #REF! 0
29 13.12.4 15 mm cement plaster of mix 1:6(1 Cement : 6 Coarse sand) 1124.88 1124.88 sqm 162.80 183130.00 183130 0 0 0 0 0 #REF! #REF! 0
30 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:New steel work (two or more coat 186.313 47.628 233.94 sqm 83.50 19534.00 0 0 0 0 0 #REF! #REF! 0
31 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 4218.21 4218.21 sqm 105.40 444599.00 444599 0 0 0 0 0 #REF! #REF! 0
32 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer 3093.33 3093.33 sqm 102.30 316448.00 316448 0 0 0 0 0 #REF! #REF! 0
33 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 1124.88 1124.88 sqm 137.00 154109.00 154109 0 0 0 0 0 #REF! #REF! 0
34 13.78.1+ 13.79.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats) 0 553.259 553.26 sqm 119.80 66280.00 0 0 0 0 0 0 #REF! #REF! 0
35 13.13.1+ 13.36.5 20 mm cement plaster of mix ;1:3 (1 cement: 3 coarse sand)Extra for providing and mixing water proofing material in proportion recommended by the manufacturers:20 mm cement plaster 1:3(1 cement:3 sand) 312.38 312.38 sqm 240.40 75096.00 75096 0 0 0 0 0 #REF! #REF! 0
36 10.15.2 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by . mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges .5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre- treatment of the surface as directed by Engineer-in-charge:Profile C 326.63 326.63 M 421.20 137577.00 137577 0 0 0 0 0 #REF! #REF! 0
37 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including stainless steel butt hinges with necessary screws 144.08 144.08 sqm 2845.60 409994.00 409994 0 0 0 0 0 #REF! #REF! 0
38 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness(weight not less than 10kg/sqm) 20.26 20.26 sqm 809.30 16396.00 16396 0 0 0 0 0 #REF! #REF! 0
39 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 16.85 16.85 sqm 6303.40 106212.00 106212 0 0 0 0 0 #REF! #REF! 0
40 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding 3596.75 3596.75 kg 144.50 519730.00 519730 0 0 0 0 0 #REF! #REF! 0
41 11.32.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding 1428.86 1428.86 kg 114.60 163747.00
42 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 498 498.00 kg 546.80 272306.00 272306 0 0 0 0 0 #REF! #REF! 0
43 10.12.1 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.Doors 181.97 181.97 sqm 3038.90 552989.00 552989 0 0 0 0 0 #REF! #REF! 0
44 10.13B Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units.Steel windows 181.97 181.97 sqm 396.70 72187.00 72187 0 0 0 0 0 #REF! #REF! 0
45 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 421.667 421.67 sqm 84.50 35631.00 35631 0 0 0 0 0 #REF! #REF! 0
46 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc 2515.224 2515.22 kg 161.10 405203.00 0 0 0 0 0 #REF! #REF! 0
47 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.m complete:300x16 mm 40 40.00 Nos 235.50 9420.00 9420 0 0 0 0 0 #REF! #REF! 0
48 9.97.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:300x10 mm 80 80.00 Nos 111.40 8912.00 8912 0 0 0 0 0 #REF! #REF! 0
49 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm 40 40.00 Nos 57.10 2284.00 2284 0 0 0 0 0 #REF! #REF! 0
50 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper 40.0 40.00 Nos 60.80 2432.00 2432 0 0 0 0 0 #REF! #REF! 0
51 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks 40.0 40.00 Nos 198.50 7940.00 7940 0 0 0 0 0 #REF! #REF! 0
52 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
53 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
c 12.79.3 Single Tee With Door 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
54 6.47A derived Providing 250mm wide fly ash brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and 91 91.00 M 1097.49 99872.00 99872 0 0 0 0 0 #REF! #REF! 0
55 5.9 Centring and shuttering including strutting,propping etc. and removal of form for
a 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 1274.66 87.533 17.68 1.52 1381.39 sqm 211.60 292303.00 269718 0 0 0 0 0 #REF! #REF! 0
b 5.9.3 Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick. 17.96 10.04 2.35 30.35 M2 437.50 13278.00 0 0 7857.5 4392.5 1028.125 0 #REF! #REF! 0
c 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 888.15 294.693 23.852 1206.69 sqm 404.70 488349.00 359434 0 0 0 0 0 #REF! #REF! 0
d 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts 846.65 436.074 52.964 1335.69 sqm 494.40 660364.00 418584 0 0 0 0 0 #REF! #REF! 0
e 5.9.20 Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick. 1121.41 1121.41 sqm 544.60 610720.00 610720 0 0 0 0 0 #REF! #REF! 0
f 5.9.19 Weather shade,Chajjas, corbels etc. including edges 81.6 81.60 sqm 550.90 44953.00 44953 0 0 0 0 0 #REF! #REF! 0
g 5.9.7 Stairs,(excluding landings) except spiral-staircaces. 31.5 31.50 sqm 439.90 13857.00 13857 0 0 0 0 0 #REF! #REF! 0
h 5.9.16.1 Centring and shuttering including strutting,propping etc. and removal of form for. Edges of slabs and breaks in floors and walis- Under 20 cms wide 270.19 270.19 Mtr 130.20 35179.00 35179 0 0 0 0 0 #REF! #REF! 0
56 13.17.2 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a floating coat of near cement Details of cost for 10 sqm 82.36 82.36 sqm 192.20 15830.00 15830 0 0 0 0 0 #REF! #REF! 0
57 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 20 to 25 mm thick - 164.99 164.99 sqm 1252.70 206683.00 206683 0 0 0 0 0 #REF! #REF! 0
58 11.20.1 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) 18.96 18.96 sqm 1053.60 19976.00 19976 0 0 0 0 0 #REF! #REF! 0
59 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Rajnagar plain white marble /Udaipur green marble/ Zebra block marble Granite of any colour and shade Area of slab upto 0.50 sqm 19.5 19.50 sqm 4401.20 85823.00 85823 0 0 0 0 0 #REF! #REF! 0
60 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 117.71 117.71 sqm 686.80 80843.00 80843 0 0 0 0 0 #REF! #REF! 0
61 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 350.95 350.95 sqm 795.00 279005.00 279005 0 0 0 0 0 #REF! #REF! 0
62 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 806.52 806.52 sqm 1638.80 1321725.00 1321725 0 0 0 0 0 #REF! #REF! 0
63 11.46.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 162 162.00 sqm 1191.80 193072.00 193072
64 14.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. 0 0.00 sqm 1342.80 0.00 0 0 0 0 0 0 #REF! #REF! 0
65 11.18.1 Precast terrazo tiles 22 mm thick with marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement:3 coarse sand) jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polishing complete with tiles of Light shade using white cement 274.06 274.06 sqm 1342.80 368008.00 368008 0 0 0 0 0 #REF! #REF! 0
66 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
b 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 13943.31 50 25 2875.808 16894.12 kg 92.60 1564395.00 1291151 0 4630 2315 0 0 #REF! #REF! 0
c 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 13943.31 2875.808 501.946 17321.06 kg 90.80 1572753.00 1266053 0 0 0 0 0 #REF! #REF! 0
d 5.22.7(D-F) Thermo-Mechanically Treated bars TMTC-500-(16-25)mm dia. 37182.16 2300.624 836.576 40319.36 kg 91.70 3697285.00 3409604 0 0 0 0 0 #REF! #REF! 0
67 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. 55 55.00 Nos 174.60 9603.00 9603 0 0 0 0 0 #REF! #REF! 0
68 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. 112.213 112.21 Cum 4649.00 521678.00 0 0 0 0 0 #REF! 521678.237
69 Carriage of Materials 0.00 0.00
70 7.38.1.1 Stone tile work for wall lining upto 10.0m height with special adhesive like araldite or equivalent over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand ) including pointing in-white cement with an admixture of pigment to match the stone shade .8 mm thick (mirror polished and machine cut edge )Granite black stone 27.22 27.22 sqm 1900.90 51742.00
71 24.1 Boring /drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples form different strata, preparing and submitting strata chart / bore log, including hire & running Charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-Charge, upto 90 metre depth below ground level, all type of soil. 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
72 24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 100 mm nominal size dia 75 75.00 m 546.1 40958.00 40957.5 #REF! #REF! 0
73 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer-in-charge. 150 mm nominal size dia 0 0 0 0 0 0 #REF! #REF! 0
24.4.1 100 mm nominal size dia 15 15.00 M 573.1 8597.00
24.4.2 150 mm nominal size dia 15 15.00 M 673.5 10103.00
74 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, inrechargepit, in the required thickness, for all leads & lifts,all complete as per direction of Engineer-incharge. 0.6 0.60 Cum 1188.9 713.00 0
75 24.6 Supplying,filling,spreading&levelinggravelsofsizerange5 mmto10mm, in the rechargepit, over theexisting layerofboulders,inrequiredthickness,forall leads&lifts,allcomplete as per direction of Engineer-in-charge. 0.6 0.60 Cum 1195.6 717.00 0
76 24.7 Supplying, filling, spreading& leveling coarse sandof size range1.5mmto2mminrechargepit, inrequiredthickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge 0.6 0.60 Cum 1195.6 717.00 0
77 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 5.65 5.65 m 1343.2 7589.00 0 0 0 0 0 7589.08 #REF! #REF! 0
78 24.12 Development of tube well in accordance with IS : 2800 (part I ) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory,i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 8 8.00 hour 916.8 7334.00 0 0 0 0 0 7334.4 #REF! #REF! 0
79 24.13 Providing and fixing suitable size threated mild steel cap or spot welded plate to the top of bore well housing / Casting pipe, removable as per requirement, all complete for borewell of :150 mm dia 1 1.00 Each 189.7 190.00 0 0 0 0 0 189.7 #REF! #REF! 0
80 24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.100 mm clamp 1 1.00 Each 1448.1 1448.00 0 0 0 0 0 1448.1 #REF! #REF! 0
81 24.15.1 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia 1 1.00 Each 228.3 228.00 0 0 0 0 0 228.3 #REF! #REF! 0
82 N.S S/F/F 2 H.P Crompton Submersible Pumb of ISI marka electri wire switch,starter etc. 1 1.00 Each 26000 26000.00 0 0 0 0 0 26000 #REF! #REF! 0
83 24.11 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete,for all depths, as per direction of engineer -in-charge : 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
84 12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Bend 87.50 110 mm bend 1 1 2.00 each 132 264.00 0 0 132 132 0 0 #REF! #REF! 0
85 17.1.1 Providing and fixining water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S tap, 10 litre low white P.V.C. Flushing cistern with munally controlled device (handle level) conforming to IS : 7231 Parryware/Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. 9 9.00 each 4470.9 40238.00 0 40238.1 0 0 0 0 #REF! #REF! 0
86 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever require 6 6.00 each 5504.3 33026.00 0 33025.8 0 0 0 0 #REF! #REF! 0
87 17.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 6 6.00 Each 6469.0 38814.00 38814 0 0 0 0 #REF! #REF! 0
88 17.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 6 6.00 Each 3694.3 22166.00 22165.8 0 0 0 0 #REF! #REF! 0
89 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 200 mm 2 2.00 Each 5231.5 10463.00 10463 0 0 0 0 #REF! #REF! 0
90 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia 20 20.00 Each 91.0 1820.00 1820 0 0 0 0 #REF! #REF! 0
91 18.21.2.2 Providing and fixing uplasticised PVC connection pipe with brass ions :45 cm length 20 mm nominal bore 25 25.00 Each 102.6 2565.00 2565 0 0 0 0 #REF! #REF! 0
92 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 12 12.00 Each 1068.5 12822.00 12822 0 0 0 0 #REF! #REF! 0
93 17.33 providing and fixing 600x120x5 mm glass shelf 12 12.00 Each 713.3 8560.00 8559.6 0 0 0 0 #REF! #REF! 0
94 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. 12 12.00 Each 96.8 1162.00 1161.6 0 0 0 0 #REF! #REF! 0
95 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 12 12.00 Each 424.0 5088.00 5088 0 0 0 0 #REF! #REF! 0
96 18.33.1 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 100A 6 6.00 Each 7210.6 43264.00 43263.6 0 0 0 0 #REF! #REF! 0
97 19.30.1.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 4 4.00 Each 4266.8 17067.00
98 18.8.1 Providing and fixing Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes 0 0.00 Each 278.2 0.00 0 0 0 0 0 #REF! #REF! 0
a 18.8.2 20 mm nominal outer dia Pipes 100 100.00 Each 350.8 35080.00 35080 0 0 0 0 #REF! #REF! 0
b 18.8.3 25 mm nominal outer dia Pipes 150 150.00 Each 463.1 69465.00 69465 0 0 0 0 #REF! #REF! 0
99 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 32mm nominal outer dia Pipes 150 150.00 Each 359.1 53865.00 53865 0 0 0 0 #REF! #REF! 0
100 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:893115 mm nominal bore. 25 25.00 Each 594.8 14870.00 14870 0 0 0 0 #REF! #REF! 0
101 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 5000 6000.00 Each 9.7 58200.00 9700 0 0 0 0 #REF! #REF! 0
102 18.49 proviiding and fixjng C.P brass bib cock to doe tc all compelte job 15 15.00 Each 434.2 6513.00 6513 0 0 0 0 #REF! #REF! 0
103 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 15 15.00 Each 715.1 10727.00 10726.5 0 0 0 0 #REF! #REF! 0
104 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 15 15.00 Each 708.4 10626.00 10626 0 0 0 0 #REF! #REF! 0
105 18.58.1.2 Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia125 mm nominal dia with 25 mm mm waste hole 16 16.00 Each 45.2 723.00 723.2 0 0 0 0 #REF! #REF! 0
106 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms weighing not less than 40 gms 10 10.00 Each 106.1 1061.00 1061 0 0 0 0 #REF! #REF! 0
107 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore 3 3.00 Each 399.2 1198.00 1197.6 0 0 0 0 #REF! #REF! 0
108 18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore 4 4.00 Each 707.3 2829.00 2829.2 0 0 0 0 #REF! #REF! 0
110 18.19.1.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Horizontal 3 3.00 Each 677.6 2033.00 2032.8 0 0 0 0 #REF! #REF! 0
112 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 10 10.00 Each 500.4 5004.00 5004 0 0 0 0 #REF! #REF! 0
Furniture 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
113 N.S Godrej Atlas Loop Main Table of size (2100W X 900D X 750H): Dimension: (2100W X 900D X 750H), Table Top Particle board with a standard thickness of 25 mm. Sturdy metal understructure built from mild steel. Built-in solutions to keep cables tangle-free and hidden. It features modern aesthetics, robust construction, and integrated wire management. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 1 1.00 Each 29070.48 29070.00 0 0 0 0 0 0 #REF! #REF! 0
114 N.S Godrej T-25 Table of size (1800W X 750D X 750H): Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 2 2.00 Each 35822.44 71645.00 0 0 0 0 0 0 #REF! #REF! 0
115 N.S Godrej Aristo Table of size (1200 x 600 x 750): Table of size 1200x600x750 Work Surface- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade.Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management, Modesty Panel- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to 1S-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Under structure- Made of 25mm Thick Pre-lamlnated twin board of E1-P2 grade and approved shade confirming to 1S-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door Storage - Made of 25mm Thick Pre-lamlnated twin board of E1-P2 grade and approved shade confirming to 1S-12823:1990, Edge banded with matching 2 mm thick PVC lipping . Handle is provided for ease of opening, Storage is provided with cam lock for security. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 8 8.00 Each 20425.8 163406.00 0 0 0 0 0 0 #REF! #REF! 0
116 N.S Godrej Sally Midback Chair: SEAT ASSEMBLY:The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywoodupholstered with fabric and moulded polyurethane foam. SEAT ASSEMBLY: 47.00CM (W) X 45.70CM(D). BACK ASSEMBLY:The Back is injection moulded in Glass filled Polypropylene which isupholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.3 ±0.02 cm. BACK SIZE: 48.00 cm(W) x 57.60 cm(H).POLYURETHANE FOAM:The polyurethane foam for seat is of density= 48 ± 3kg/m.ARMRESTS (FIXED):The armrest is made of injection moulded Polypropylene which is connecting seat and back .MECHANISM :The mechanism is designed with the following features: *360° revolving type. *Centre - Tilt. *Tilt with upright lock. PNEUMATIC HEIGHT ADJUSTMENT:The pneumatic height adjustment has a stroke of 10 ± 0.5cm.PEDESTAL ASSEMBLY:The pedestal is injection moulded Polyamide and fitted with 5 nos.twinwheel castors. The pedestal is 66.1 ±0.5 cm P.C.D.TWIN WHEEL CASTORS:The twin wheel castors are injection moulded in black Polyamide having6.0± 0.1 cm wheel Diameter. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 3 3.00 Each 11542.76 34628.00 0 0 0 0 0 0 #REF! #REF! 0
117 N.S Godrej Ch-7B Chair: Cantiliver Visitor Chair Size (W)490mm X (D)470mm X (H)680mm). Multipurpose fixed cantiliver chair & armrest with pading & metal base. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Standard on every executive. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 18 18.00 Each 7354.94 132389.00
118 N.S Godrej Unwind Chair with Arm: The seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance.The tubular weled frame is made from Dia2.22 +/- 0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am Mild Steel 202 grade tube.The tube are buff polished to give shiny finish. cm. The Shoes are made of high impact strenght polypropylene polymer. compond with indoor grad UV Resistance and pressed fitted with tubularfram. SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm* (seat H) 45.0 cmSeat Size 52.5cm(W)*53.2 cm(D) Back Size 51.6 cm(W)*40.5 cm (H). (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 46 46.00 Each 6048.68 278239.00
119 N.S Godrej Nano Perch 3 Seater Chair: Godrej Nano Perch three seater chair Cross Beammade of MS ERW rectangular black powder coated Tube of 80 x 40 x 2 mm Leg & arm rest chrome plated made of cold rolled steel. Arm rest & leg assembled to the cross beam with M10 x 100 mm bolts. Seat & back 1.6mm thick powder coated perforated shell of cold rolled MS Sheet. Side Bar of chrome plated solid steel 30 x 12 mm (DIN 174) with flunting & plastic insert .The shell is assembled on the cross beam with help of M8 Bolts The overall dimension is 1608mm (L) x 695mm (H) x 555mm (D), Seat Height : 405mm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 8 8.00 Each 30701.24 245610.00
120 N.S Godrej Nano Perch 2 Seater Chair: Godrej Nano Perch two seater chair Cross Beammade of MS ERW rectangular black powder coated Tube of 80 x 40 x 2 mm Leg & arm rest chrome plated made of cold rolled steel. Arm rest & leg assembled to the cross beam with M10 x 100 mm bolts. Seat & back 1.6mm thick powder coated perforated shell of cold rolled MS Sheet. Side Bar of chrome plated solid steel 30 x 12 mm (DIN 174) with flunting & plastic insert .The shell is assembled on the cross beam with help of M8 Bolts The overall dimension is 1072mm (L) x 695mm (H) x 555mm (D), Seat Height : 405mm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 10 10.00 Each 20467.1 204671.00
121 N.S Godrej APO Single Sheet Bed with PLY: HAVING BED FRAME ASSEMBLY - BED FRAME ASSEMBLY IS A WELDED OF SIDE FRAME, INNER SLAT. THE SIDE FRAME ARE MADE OF RECT. PIPE 50.8 X 25.4 X 1.2 mm THK MS, ASSEMBLY INNER SLATS OF SQ. TUBE 19 X 1.0 MS ERW TUBE IS : 7138. MS SHEET 1.0 mm THK, HEAD BOARD & TAIL BOARD - HEAD BOARD & TAIL BOARD ARE MADE UP OF SQ. PIPE 38.1 X 1.2 mm & SQ. PIPE 25 X 1.0 mm THK MS ERW TUBE IS: 7138 AND SUPPORT BRACKET 3.2MM THK MS SHEET IS : 513 HEAD/TAIL BOARD CONNECTED WITH BED FRAME WITH M8 BOLT, FINISH-EPOXY POLYESTER POWDER COATED DFT 40—60 MICRON. DIMENSION- 1980 MM WIDTH, 915 MM DEPTH, 650 MM HEIGHT, 400 MM BED STEAD. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 30 30.00 Each 11399.98 341999.00
122 N.S Godrej Snow white Mattress of size (78" x 36" x 4"): Mattress of size (1981mm x 914mm x 102mm); Cover Material: Fabric; Colour: Snow White; Material: Foam. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 30 30.00 Each 4799.06 143972.00
123 N.S Godrej Bobbin 2 Seater Sofa: Bobbin Sofa 2 str Filling Material: Foam W x H x D: (150 x 90 x 82)cm; Seat Height: (44) cm. Crafted with Pinewood obtained from the forests of New Zealand, the frame of the sofa is treated to be knot-free and termite resistant, increasing the life of the sofa. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 3 3.00 Each 25334.6 76004.00
124 N.S Godrej Bobbin 1 Seater Sofa: Bobbin Sofa 1 str Filling Material: Foam W x H x D: (107 x 90 x 82)cm; Seat Height: (44) cm. Crafted with Pinewood obtained from the forests of New Zealand, the frame of the sofa is treated to be knot-free and termite resistant, increasing the life of the sofa. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 6 6.00 Each 20593.36 123560.00
125 N.S Godrej Davy Coffee Table of size (600W x 4560H x 1100D)mm: DAVY Coffee Table L X W X H-1100 X 600 X 4560 Table -top-8mm Toughened Clear Glass top PLT-18 mm thick in Cincinnati Walnut Configuration -Shelf Storage + Display Space. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 2 2.00 Each 20501.32 41003.00 0 0 0 0 0 0 #REF! #REF! 0
126 N.S Godrej Silica 4 Seater Dining Table of size (1190W x 750H x 900D)mm: Dimension: (1190W x 750H x 900D)mm; Finish Colour: Black; Weight: 27.70 kgs; Primary Material: Metal; With a toughened glass top, sleek black frame, and sculptural design, the Silica table turns every meal into a modern moment. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified 3 3.00 Each 25255.54 75767.00 0 0 0 0 0 0 #REF! #REF! 0
127 N.S Godrej Ellie Ebn Dining Chair: Chair Dimension: (470W x 800H x 520D)mm; Finish Color: Dark Brown; Weight: 4.80 kgs; Primary Material: Metal; Primary Material Subtype: Metal; Delivery Condition: Knock Down, Dining chairs feature quilted backs and soft upholstery, offering the perfect balance of elegance.(Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 12 12.00 Each 5423.28 65079.00 0 0 0 0 0 0 #REF! #REF! 0
128 N.S Godrej Folding Wheel Chair with Cushion: Over all dimension should be (L) 790 x (W) 600 x (H) 870mm Foldable frame structure should be made of section 22x1.2mm A3 carbon steel with chrome finish. Cross bar should be made of A3 carbon steel with section 25.4 x 1.2mm. The Rear wheel should be made of 24 inch Solid mag wheels with alloy in the rim . Integrated handrim shoud be provided to drive the wheel chair of section 16x1.2mm A3 carbon steel with chrome finish. the front wheel should be of 8 inch HUB made of PA polymer and outer with solid rubber. PU molded arm rest & base should be made of ABS for better arm support .There should be Leatherite strap for calf rest & leatherite cushion for seat. The foot rest should be Adjustable alluminimum die cast foot rest with updown & swivel type mechanism. Push Handles should be made of moulded rubber grip to push the wheelchair. Hand brakes should be provided to lock the wheelchair at desired location. Extended base with molded plastic for better grip. It should be Anti rust chrome finsh safe working load should be 100kg. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 2 2.00 Each 28090.65 56181.00 0 0 0 0 0 0 #REF! #REF! 0
129 N.S Godrej Storwel Plain with 4 sh of size (1981H x 916W x 486D): Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 10 10.00 Each 34723.86 347239.00 0 0 0 0 0 0 #REF! #REF! 0
130 N.S Godrej 1.5 Ton Inverter AC with Stabilizer, Outer Stand and Installation 5 5.00 Each 95723.52 478618.00 0 0 0 0 0 0 #REF! #REF! 0
131 N.S Godrej Storofix (Half Height Swing Door Storage): Dimension: (914 H x 914 W x 463 D); Finish Color: Telegrey-2; Weight: 25.48 kgs; Door Type: Hinged; Delivery Condition: Knock Down; No. of Lockers: No Lockers; Primary Material: Metal; Primary Material Subtype: CRCA Steel; Mounting Type: Floor Mount; Includes 1 adjustable shelf to configure space for items of varying sizes. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, BIFMA Level 2, IGBC Platinum, BIS, Indoor Advantage Gold Certified) 10 10.00 Each 17242.16 172422.00 0 0 0 0 0 0 #REF! #REF! 0
FIRE FIGHTING WORK 0.00 0.00 0 0 0 0 0 0 #REF! #REF! 0
(A) FIRE HYDRANT SYSTEM(Wet Riser System) 0.00 Nos 0.00 0 0 0 0 0 0 #REF! #REF! 0
132 4 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) 0.00 0.00
b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. 0.00 0.00
c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS : 325. 0.00 0.00
d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. 0.00 0.00
e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 0.00 0.00
133 8 Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with twoor more coats of synthetic enamel paint of requiredshade complete as required : 0.00 0.00
134 9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) withblank Gunmetal/Stainless Steel cap and chain as required : 0.00 0.00
9.2 Single headed Stainless steel 2 2.00 no 5722.00 11444.00
135 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 0.00 0.00
136 12 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat,ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 0.00 0.00
137 13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted betweenflange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 2 2.00 no 1236.00 2472.00
138 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubbergasket, GI bolts, nuts, washers etc.as required : 0.00 0.00
139 15 Providing, installation, testing and commissioning of stainless steel Ystrainer fabricated out of 1.6 mm thick stainless steel, Grade 304,sheet with 3 mm dia holes with stainless steel flange. 0.00 0.00
140 16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mmdia male and female couplings duly bound with GI wire, rivets etc.conforming to IS 636 (type-A) as required : 0.00 0.00
16.2 Stainless steel (Grade 304) 3 3.00 set 4445.00 13335.00
141 17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following asrequired. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S.Pipe and socket 0.00 0.00
142 18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : 0.00 0.00
18.2 Stainless steel (Grade 304) 3 3.00 no 1631.00 4893.00
143 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 1 1.00 set 17707.00 17707.00
144 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 1 1.00 no 1442.00 1442.00
(B) FIRE ALARM SYSTEM 0.00 0.00
145 17.2 E&M DSR-22 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. 0.00 0.00
146 17.1.2/ E&M DSR-22 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 30 30.00 Each 1153.25 34598.00
147 17.2.7/ E&M DSR-22 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 2 2.00 Each 3270.00 6540.00
148 17.2.14/E&M DSR-22 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 2 2.00 Each 3871.00 7742.00
149 17.2.15/E&M DSR-22 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required 5 5.00 Each 3506.00 17530.00
150 17.5.3.2/E&M DSR-22 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm 150 150.00 RM 89.00 13350.00
(C) Fire Extinguishers 0.00 0.00
151 NS SITC of CO2 stored pressure squeeze grip type fire Extinguisher, ISI mark (IS:15683), operating temp.(-30) degree C to (+55) degree C for class 13B type of fire filled with 1mtr hose and PVC horn complete in all respect. 0.00 0.00
152 NS SITC of ABC dry stored pressure squeeze grip type fire Extinguisher, ISI mark (IS:15683), operating temp.(+5) degree C to (+55) degree C for class 3A type of fire filled with MAP ABC powder, complete in all respect. 0.00 0.00
Capacity 6 kg 12 12.00 Each 4350.00 52200.00
NON -SCHEDULED ITEM TOTAL = A 3277902
SCHEDULED ITEM TOTAL = 37713924
APPLYING C.F .0982 ON SCHEDULED ITEM = 37035073
Net Total = B 39020153
Gross Total = (A+B) 42298055
Total (Civil ) 42298055
1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.
1.3.3 Group-C Group-C 374 Point 1,146.00 428,604.00
2 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. (for Barrack) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. (for Barrack) 0.00
1.3.2 Group-B Group-B 52 Point 947.00 49,244.00
3 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 71 Each 414.00 29,394.00
4 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 48 Each 531.00 25,488.00
5 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 720 Meter 309.00 222,480.00
6 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 25 Each 632.00 15,800.00
7 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 6 Each 683.00 4,098.00
8 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. 12 Each 1,064.00 12,768.00
9 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00
1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1065 Meter 201.00 214,065.00
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for CT 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for CT 180 Meter 246.00 44,280.00
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 2 No. 5A Switch & Socket 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 2 No. 5A Switch & Socket 375 Meter 246.00 92,250.00
1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for AC 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for AC 90 Meter 309.00 27,810.00
1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire for Light DB 4 X 6 sq. mm + 1 X 6 sq. mm earth wire for Light DB 180 Meter 660.00 118,800.00
1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire( for Power DB & Light VTPN) 4 X 10 sq. mm + 1 X 6 sq. mm earth wire( for Power DB & Light VTPN) 170 Meter 925.00 157,250.00
1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire( for Power VTPN) 4 X 16 sq. mm + 1 X 6 sq. mm earth wire( for Power VTPN) 60 Meter 1,312.00 78,720.00
10 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 227 Each 64.00 14,528.00
11 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Supplying and fixing batten/ angle holder including connection etc. as required. 106 Each 80.00 8,480.00
12 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 55 Each 358.00 19,690.00
13 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 3 Each 351.00 1,053.00
14 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00
2.9.1 4 way ( 4 + 12 ), Double door, horizontal type( for Power + AC) 4 way ( 4 + 12 ), Double door, horizontal type( for Power + AC) 6 Each 4,184.00 25,104.00
2.9.1 4 way ( 4 + 12 ), Double door, horizontal type( for Light +CT+2 NOS 5A) 4 way ( 4 + 12 ), Double door, horizontal type( for Light +CT+2 NOS 5A) 10 Each 4,184.00 41,840.00
15 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00
2.12.1 6 A to 32 A, Single pole 6 A to 32 A, Single pole 192 Each 237.00 45,504.00
16 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs) Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs) 0.00
2.33.1 4 ways , Double door, I/C 160 A, MCCB ( 3 no. for light VTPN & 3 no. for Power VTPN) 4 ways , Double door, I/C 160 A, MCCB ( 3 no. for light VTPN & 3 no. for Power VTPN) 6 Each 12,107.00 72,642.00
17 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00
18 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00
2.4.1 100 A, 30 KA, FPMCCB (for light VTPN) 100 A, 30 KA, FPMCCB (for light VTPN) 3 Each 8,172.00 24,516.00
2.4.2 125 A, 36 KA, FPMCCB (For Power VTPN) 125 A, 36 KA, FPMCCB (For Power VTPN) 3 Each 8,676.00 26,028.00
PANEL PANEL 0.00
19 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00
2.4.1 100 A, 30 KA, FPMCCB 100 A, 30 KA, FPMCCB 1 Each 8,172.00 8,172.00
2.4.2 125 A, 36 KA, FPMCCB (1 No. spare) 125 A, 36 KA, FPMCCB (1 No. spare) 4 Each 8,676.00 34,704.00
2.4.3 160 A, 36 KA, FPMCCB( 1No. Spare) 160 A, 36 KA, FPMCCB( 1No. Spare) 4 Each 13698.00 54,792.00
20 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00
21 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 30 Sq.ft 1,809.00 54,270.00
22 A/R Supplying of copper strip of all sizes for busbar strip/ interconnection including drilling holes etc as reqd. Supplying of copper strip of all sizes for busbar strip/ interconnection including drilling holes etc as reqd. 20 Kg 871.00 17,420.00
23 2.20 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 1 Each 214.00 214.00
24 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 Each 6,536.00 13,072.00
25 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00
26 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00
27 7.1 Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00
7.1.3 Above 95 sq. mm and upto 185 sq. mm Above 95 sq. mm and upto 185 sq. mm 95 Meter 336.00 31,920.00
28 DSR/9.2 Brush Less Direct Current (BLDC) Fan without Remote.Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories,including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required Brush Less Direct Current (BLDC) Fan without Remote.Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories,including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required 0.00
9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 55 Each 2,695.00 148,225.00
29 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 152 Each 521.00 79,192.00
30 5.7 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00
31 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00
6.1.5 12 watt LED lamp 12 watt LED lamp 106 Each 239.00 25,334.00
32 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00
8.17.1 300 mm sweep 300 mm sweep 20 Each 2,572.00 51,440.00
33 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00
34 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 Each 13,721.00 27,442.00
35 3.17 Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 30 Meter 144.00 4,320.00
FOR Lighting Arrester FOR Lighting Arrester 0.00
36 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4 Each 416.00 1,664.00
37 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 4 Each 81.00 324.00
38 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 120 Meter 102.00 12,240.00
39 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 40 Meter 145.00 5,800.00
40 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 80 Each 102.00 8,160.00
41 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 2 Set 6,323.00 12,646.00
42 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. 30 Meter 37.00 1,110.00
Part-B FIRE ALARM Part-B FIRE ALARM 0.00
43 DSR- 28.1.1 Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required. Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required. 48 Each 1,136.00 54,528.00
44 DSR- 28.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 48 Each 1,223.00 58,704.00
45 DSR- 28.1.3 Supplying, installation, testing & commissioning of manual call Each boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. Supplying, installation, testing & commissioning of manual call Each boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 6 Each 513.00 3,078.00
46 DSR- 28.1.5 Supplying, installation, testing & commissioning response indicator Each on surface/recess MS box having two LEDs metallic cover complete with all connections etc, as required. Supplying, installation, testing & commissioning response indicator Each on surface/recess MS box having two LEDs metallic cover complete with all connections etc, as required. 3 Each 222.00 666.00
47 DSR- 28.1.6 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line. matching transformer etc. complete as required Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line. matching transformer etc. complete as required 3 Each 600.00 1,800.00
48 DSR- 28.1.8 station in surface/recess suitable for operation on simplex mode. complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. station in surface/recess suitable for operation on simplex mode. complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. 3 Each 963.00 2,889.00
49 DSR- 28.1.9 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 0.00
50 DSR- 28.1.11 Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required 2 Nos. (one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit-1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required- 1 set. Amplifier change over switch for inter changing amplifier-1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required-1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH each sealed maintenance free batteries-1 set. Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required 2 Nos. (one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit-1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required- 1 set. Amplifier change over switch for inter changing amplifier-1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required-1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH each sealed maintenance free batteries-1 set. 1 Each 52,258.00 52,258.00
51 DSR- 28.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable. Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable. Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 300 Each 386.00 115,800.00
52 DSR- 28.5.3 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. 0.00
28.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm speaker cable Two pair, 2-core, 1.5 sqmm 85 Each 97.00 8,245.00
Part- C TELEPHONE WIRING SYSTEM Part- C TELEPHONE WIRING SYSTEM 0.00
53 1.27 Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required. Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required. 0.00
1.27.1 1 or 2 Module (75mm X 75mm) 1 or 2 Module (75mm X 75mm) 11 Each 234.00 2,574.00
54 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00
1.24.6 Telephone socket outlet Telephone socket outlet 11 Each 131.00 1,441.00
55 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. 0.00
56 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00
Part-D CAMPUS LIGHT Part-D CAMPUS LIGHT 0.00
57 8.21 Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) 0.00
8.21.1 Single arm,1000 mm Single arm,1000 mm 16 Each 19,292.00 308,672.00
58 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00
59 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required. Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required. 0.00
9.16.1 for 4 metre pole( 500 mm * 500 mm * 1000 mm) for 4 metre pole( 500 mm * 500 mm * 1000 mm) 16 Each 3,305.00 52,880.00
60 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00
61 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00
7.7.3 10 sq. mm, 2 core 10 sq. mm, 2 core 250 Metre 201.00 50,250.00
62 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00
7.1.1 Upto 35sq.mm Upto 35sq.mm 230 Metre 315.00 72,450.00
63 3.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 250 Metre 31.00 7,750.00
64 9.13 Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required. Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required. 0.00
65 3.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal/ coke and salt ) as required. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal/ coke and salt ) as required. 2 SET 5,033.00 10,066.00
66 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. 30 Meter 37.00 1,110.00
PART E:-SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM PART E:- SOLAR 0.00
67 DSR/17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc.required. a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Fu 0 16 Kwp 54280.00 868,480.00
PART F:-CCTV 0 0.00
68 DSR/40.9.3 SITC of 2MP IR Outdoor PTZ Camera - 1/2.8" Progressive Scam CMOS, 1920 X 1080 at 60fps, 4.8 mm to 153 mm, 32XOptical, 16X ditital zoom, color: 0.005 Lux at F1.6, B/W: 0.001 Lux at F1.6, ICR, ONVIF, support H.265, MJPEG, 120 db WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360° endless, Tilt: From 15° to 90° (auto-flip), Pan Speed - from 0.1°/s to 160's, Preset Speed: 240°/s, Tilt Speed from 0.1°/s to 120°/s, Preset Speed: 200°/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm Output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Region Entrance Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. (HI-PoE Injector under Si Scope, if PoE is used) (Model no DS-2DE72321W-AE (Camera) + DS-1602ZJ (wall mount Bracket) or DS-1602ZJ-pole (Vertical Pole Mounting Bracket)) (Approved Makes: HIKvision/Honeywell/Bosch)Equivalent 0 1 Nos 107974.00 107,974.00
69 DSR/40.4.1 SITC 2 MP IR Bullet Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 x 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR ICR, ONVIF (PROFILE S) , Support H. 265, H 264, MJPEg, DWDR, 3 D Digital Noise Reduction, Three iidividually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics - Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus) 0 8 Nos 10063.00 80,504.00
70 DSR/40.1.1 SITC 2 MP IR Indoor Dome Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 x 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR ICR, ONVIF Support H. 265, H 264, MJPEG, DWDR, 3 D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics - Line crossing detection, Intrusion detection, Motion detection, Video tampering UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus) 0 15 Nos 8048.00 120,720.00
71 DSR/40.4.2 SITC of 43 Inches Commercial Display (Approved Makes: LG /Samsung/Panasonic) /Equipment 0 1 Nos 51459.00 51,459.00
72 DSR/40.11.1 SITC of 32 ch Network Video Racoraer Communication OS, Up to 12 Megapixels Resolution , Two independent HDMI outputs, one HDMI output of 4K resolution , 1VGA output with output upto 1920 x 1080, Support H.265, MIPEG , Support N+1 hot space system , Support Dual Power - Redundant, Incoming Bandwidth 320 Mbps, 4 SATA Hard Disk, ANR Technology, 4 SATA interface for 4 HDDs and capacity of each HDD upto 4TB, 3 x USB at least 1 x USB with 3.0, Alarm I/O 16/4, RS-485, RS- 232,2 RJ-45 10/100/1000 Mbps self - adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL cerfiied, (Approved Make:- 0 1 Nos 64784.00 64,784.00
73 DSR/40.12.2 SITC of 6TB Surveillance Hard Disk 0 1 Nos 16376.00 16,376.00
74 SITC of 12 port Unmanaged Giga Network PoE Switch : 08 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at , PoE port, Uplink ports (Approved Makes: 0 2 Nos 10450.00 20,900.00
75 SITC of Network Rack 2U with Standard accessries (Approved Makes: 0 1 Nos 9500.00 9,500.00
76 Supply, Installation, Testing and Commissioning of CAT 6 UTP cable 23 AWG solid copper conductor for Connectivity of Hub room to End Point. (Approved Makes: 0 625 Nos 52.00 32,500.00
PART G:- LAN 0 0.00
77 1.58 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. 0 0.00
1.58.1 1 run of cable 0 625 Metre 52.00 32,500.00
78 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0 0.00
79 DSR 39.14 Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. 0 24 Each 212.00 5,088.00
80 DSR 39.16 Supplying, Installation, Testing and commissioning of RJ45 Connector for CAT 6/6A Cables. RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors. Housing: PC, UL94V-2, transparent color, Use for 24- 26 AWG stranded wires etc. complete as required. 0 24 Each 9.00 216.00
81 DSR 39.12 Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 0 0.00
DSR 39.12.2 Copper Patch Cords of length 3m (10ft) 0 24 Each 227.00 5,448.00
82 DSR 39.11 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 0 1 Each 5,278.00 5,278.00
83 DSR 39.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 0 0.00
DSR 39.1.1 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. 0 1 Each 35,091.00 35,091.00
84 DSR 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0 0.00
TOTAL ELECTRIC ₹ 5,361,789.00
TOTAL CIVIL+ ELECTRIC ₹ 47,659,844
Executive Engineer Building Division, Arwal
Building Division Arwal
Name of work:- Estimate for Provision of E/I in the Proposed Excise Suprintendent Office (G+2) with( 12 & 8 Beddded )Male & 10 Bedded Female Barrack at Arwal, Distt-Arwal.
SL.No. Code Particular Particular Qty Rate Unit Rate Amount
Part-A Wiring Part-A Wiring
1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.
2 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. (for Barrack) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. (for Barrack) 0.00
1.3.2 Group-B Group-B 52 947.00 Point 947.00 49,244.00
3 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 71 414.00 Each 414.00 29,394.00
4 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 48 531.00 Each 531.00 25,488.00
5 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 720 309.00 Meter 309.00 222,480.00
6 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 25 632.00 Each 632.00 15,800.00
7 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 6 683.00 Each 683.00 4,098.00
8 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. 12 1,064.00 Each 1,064.00 12,768.00
9 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00
1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1065 201.00 Meter 201.00 214,065.00
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for CT 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for CT 180 246.00 Meter 246.00 44,280.00
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 2 No. 5A Switch & Socket 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 2 No. 5A Switch & Socket 375 246.00 Meter 246.00 92,250.00
1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for AC 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for AC 90 309.00 Meter 309.00 27,810.00
1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire for Light DB 4 X 6 sq. mm + 1 X 6 sq. mm earth wire for Light DB 180 660.00 Meter 660.00 118,800.00
1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire( for Power DB & Light VTPN) 4 X 10 sq. mm + 1 X 6 sq. mm earth wire( for Power DB & Light VTPN) 170 925.00 Meter 925.00 157,250.00
1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire( for Power VTPN) 4 X 16 sq. mm + 1 X 6 sq. mm earth wire( for Power VTPN) 60 1,312.00 Meter 1,312.00 78,720.00
10 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 227 64.00 Each 64.00 14,528.00
11 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Supplying and fixing batten/ angle holder including connection etc. as required. 106 80.00 Each 80.00 8,480.00
12 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 55 358.00 Each 358.00 19,690.00
13 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 3 351.00 Each 351.00 1,053.00
14 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00
2.9.1 4 way ( 4 + 12 ), Double door, horizontal type( for Power + AC) 4 way ( 4 + 12 ), Double door, horizontal type( for Power + AC) 6 4,184.00 Each 4,184.00 25,104.00
2.9.1 4 way ( 4 + 12 ), Double door, horizontal type( for Light +CT+2 NOS 5A) 4 way ( 4 + 12 ), Double door, horizontal type( for Light +CT+2 NOS 5A) 10 4,184.00 Each 4,184.00 41,840.00
15 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00
2.12.1 6 A to 32 A, Single pole 6 A to 32 A, Single pole 192 237.00 Each 237.00 45,504.00
16 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs) Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs) 0.00
2.33.1 4 ways , Double door, I/C 160 A, MCCB ( 3 no. for light VTPN & 3 no. for Power VTPN) 4 ways , Double door, I/C 160 A, MCCB ( 3 no. for light VTPN & 3 no. for Power VTPN) 6 12,107.00 Each 12,107.00 72,642.00
17 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00
18 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00
2.4.1 100 A, 30 KA, FPMCCB (for light VTPN) 100 A, 30 KA, FPMCCB (for light VTPN) 3 8,172.00 Each 8,172.00 24,516.00
2.4.2 125 A, 36 KA, FPMCCB (For Power VTPN) 125 A, 36 KA, FPMCCB (For Power VTPN) 3 8,676.00 Each 8,676.00 26,028.00
PANEL PANEL 0.00
19 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00
2.4.2 125 A, 36 KA, FPMCCB (1 No. spare) 125 A, 36 KA, FPMCCB (1 No. spare) 4 8,676.00 Each 8,676.00 34,704.00
2.4.3 160 A, 36 KA, FPMCCB( 1No. Spare) 160 A, 36 KA, FPMCCB( 1No. Spare) 4 13698.00 Each 13698.00 54,792.00
20 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00
21 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 30 1,809.00 Sq.ft 1,809.00 54,270.00
22 A/R Supplying of copper strip of all sizes for busbar strip/ interconnection including drilling holes etc as reqd. Supplying of copper strip of all sizes for busbar strip/ interconnection including drilling holes etc as reqd. 20 871.00 Kg 871.00 17,420.00
23 2.20 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 1 214.00 Each 214.00 214.00
24 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 6,536.00 Each 6,536.00 13,072.00
25 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00
26 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00
27 7.1 Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00
7.1.3 Above 95 sq. mm and upto 185 sq. mm Above 95 sq. mm and upto 185 sq. mm 95 336.00 Meter 336.00 31,920.00
28 DSR/9.2 Brush Less Direct Current (BLDC) Fan without Remote.Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories,including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required Brush Less Direct Current (BLDC) Fan without Remote.Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories,including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required 0.00
9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 55 2,695.00 Each 2,695.00 148,225.00
29 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 152 521.00 Each 521.00 79,192.00
30 5.7 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00
31 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00
6.1.5 12 watt LED lamp 12 watt LED lamp 106 239.00 Each 239.00 25,334.00
32 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00
33 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00
34 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 13,721.00 Each 13,721.00 27,442.00
35 3.17 Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 30 144.00 Meter 144.00 4,320.00
FOR Lighting Arrester FOR Lighting Arrester 0.00
36 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4 416.00 Each 416.00 1,664.00
37 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 4 81.00 Each 81.00 324.00
38 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 120 102.00 Meter 102.00 12,240.00
39 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 40 145.00 Meter 145.00 5,800.00
40 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 80 102.00 Each 102.00 8,160.00
41 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 2 6,323.00 Set 6,323.00 12,646.00
42 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. 30 37.00 Meter 37.00 1,110.00
Part-B FIRE ALARM Part-B FIRE ALARM 0.00
43 DSR- 28.1.1 Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required. Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required. 48 1,136.00 Each 1,136.00 54,528.00
44 DSR- 28.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 48 1,223.00 Each 1,223.00 58,704.00
45 DSR- 28.1.3 Supplying, installation, testing & commissioning of manual call Each boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. Supplying, installation, testing & commissioning of manual call Each boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 6 513.00 Each 513.00 3,078.00
46 DSR- 28.1.5 Supplying, installation, testing & commissioning response indicator Each on surface/recess MS box having two LEDs metallic cover complete with all connections etc, as required. Supplying, installation, testing & commissioning response indicator Each on surface/recess MS box having two LEDs metallic cover complete with all connections etc, as required. 3 222.00 Each 222.00 666.00
47 DSR- 28.1.6 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line. matching transformer etc. complete as required Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line. matching transformer etc. complete as required 3 600.00 Each 600.00 1,800.00
48 DSR- 28.1.8 station in surface/recess suitable for operation on simplex mode. complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. station in surface/recess suitable for operation on simplex mode. complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. 3 963.00 Each 963.00 2,889.00
49 DSR- 28.1.9 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 0.00
50 DSR- 28.1.11 Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required 2 Nos. (one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit-1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required- 1 set. Amplifier change over switch for inter changing amplifier-1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required-1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH each sealed maintenance free batteries-1 set. Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required 2 Nos. (one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit-1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required- 1 set. Amplifier change over switch for inter changing amplifier-1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required-1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH each sealed maintenance free batteries-1 set. 1 52,258.00 Each 52,258.00 52,258.00
51 DSR- 28.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable. Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable. Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 300 386.00 Each 386.00 115,800.00
52 DSR- 28.5.3 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. 0.00
28.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm speaker cable Two pair, 2-core, 1.5 sqmm 85 97.00 Each 97.00 8,245.00
Part- C TELEPHONE WIRING SYSTEM Part- C TELEPHONE WIRING SYSTEM 0.00
53 1.27 Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required. Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required. 0.00
1.27.1 1 or 2 Module (75mm X 75mm) 1 or 2 Module (75mm X 75mm) 11 134.00 Each 234.00 2,574.00
54 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00
1.24.6 Telephone socket outlet Telephone socket outlet 11 131.00 Each 131.00 1,441.00
55 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. 0.00
56 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00
Part-D CAMPUS LIGHT Part-D CAMPUS LIGHT 0.00
57 8.21 Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) 0.00
8.21.1 Single arm,1000 mm Single arm,1000 mm 16 19,292.00 Each 19,292.00 308,672.00
58 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00
59 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required. Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required. 0.00
9.16.1 for 4 metre pole( 500 mm * 500 mm * 1000 mm) for 4 metre pole( 500 mm * 500 mm * 1000 mm) 16 3,305.00 Each 3,305.00 52,880.00
60 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00
61 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00
62 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00
7.1.1 Upto 35sq.mm Upto 35sq.mm 230 315.00 Metre 315.00 72,450.00
63 3.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 250 31.00 Metre 31.00 7,750.00
64 9.13 Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required. Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required. 0.00
65 3.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal/ coke and salt ) as required. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal/ coke and salt ) as required. 2 5,033.00 SET 5,033.00 10,066.00
66 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. 30 37.00 Meter 37.00 1,110.00
PART E:- SOLAR 0.00
67 DSR/17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc.required. a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Fu 0 0 0 0 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc.required. a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Fu 16 Kwp 54280.00 868,480.00
PART F:-CCTV 0.00
68 DSR/40.9.3 SITC of 2MP IR Outdoor PTZ Camera - 1/2.8" Progressive Scam CMOS, 1920 X 1080 at 60fps, 4.8 mm to 153 mm, 32XOptical, 16X ditital zoom, color: 0.005 Lux at F1.6, B/W: 0.001 Lux at F1.6, ICR, ONVIF, support H.265, MJPEG, 120 db WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360° endless, Tilt: From 15° to 90° (auto-flip), Pan Speed - from 0.1°/s to 160's, Preset Speed: 240°/s, Tilt Speed from 0.1°/s to 120°/s, Preset Speed: 200°/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm Output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Region Entrance Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. (HI-PoE Injector under Si Scope, if PoE is used) (Model no DS-2DE72321W-AE (Camera) + DS-1602ZJ (wall mount Bracket) or DS-1602ZJ-pole (Vertical Pole Mounting Bracket)) (Approved Makes: HIKvision/Honeywell/Bosch)Equivalent 1 Nos 107974.00 107,974.00
69 DSR/40.4.1 SITC 2 MP IR Bullet Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 x 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR ICR, ONVIF (PROFILE S) , Support H. 265, H 264, MJPEg, DWDR, 3 D Digital Noise Reduction, Three iidividually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics - Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus) 8 Nos 10063.00 80,504.00
70 DSR/40.1.1 SITC 2 MP IR Indoor Dome Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 x 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR ICR, ONVIF Support H. 265, H 264, MJPEG, DWDR, 3 D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics - Line crossing detection, Intrusion detection, Motion detection, Video tampering UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus) 15 Nos 8048.00 120,720.00
71 DSR/40.4.2 SITC of 43 Inches Commercial Display (Approved Makes: LG /Samsung/Panasonic) /Equipment 1 Nos 51459.00 51,459.00
72 DSR/40.11.1 SITC of 32 ch Network Video Racoraer Communication OS, Up to 12 Megapixels Resolution , Two independent HDMI outputs, one HDMI output of 4K resolution , 1VGA output with output upto 1920 x 1080, Support H.265, MIPEG , Support N+1 hot space system , Support Dual Power - Redundant, Incoming Bandwidth 320 Mbps, 4 SATA Hard Disk, ANR Technology, 4 SATA interface for 4 HDDs and capacity of each HDD upto 4TB, 3 x USB at least 1 x USB with 3.0, Alarm I/O 16/4, RS-485, RS- 232,2 RJ-45 10/100/1000 Mbps self - adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL cerfiied, (Approved Make:- 1 Nos 64784.00 64,784.00
73 DSR/40.12.2 SITC of 6TB Surveillance Hard Disk 1 Nos 16376.00 16,376.00
74 SITC of 12 port Unmanaged Giga Network PoE Switch : 08 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at , PoE port, Uplink ports (Approved Makes: 2 Nos 10450.00 20,900.00
75 SITC of Network Rack 2U with Standard accessries (Approved Makes: 1 Nos 9500.00 9,500.00
76 Supply, Installation, Testing and Commissioning of CAT 6 UTP cable 23 AWG solid copper conductor for Connectivity of Hub room to End Point. (Approved Makes: 625 Nos 52.00 32,500.00
PART G:- LAN 0.00
77 1.58 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. 0.00
1.58.1 1 run of cable 625 Metre 52.00 32,500.00
78 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00
79 DSR 39.14 Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. 24 Each 212.00 5,088.00
80 DSR 39.16 Supplying, Installation, Testing and commissioning of RJ45 Connector for CAT 6/6A Cables. RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors. Housing: PC, UL94V-2, transparent color, Use for 24- 26 AWG stranded wires etc. complete as required. 24 Each 9.00 216.00
81 DSR 39.12 Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 0 0 0.00 0.00
DSR 39.12.2 Copper Patch Cords of length 3m (10ft) 24 Each 227.00 5,448.00
82 DSR 39.11 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 1 Each 5278.00 5,278.00
83 DSR 39.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 0 0 0.00 0.00
DSR 39.1.1 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. 1 Each 35091.00 35,091.00
84 DSR 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0.00
TOTAL RS.- 5,361,789.00
Total Rs. Total 5,361,789.00
Say Rs. Say 5,361,789.00
E.B.S,ARWAL E.B.S.D,ARWAL
Estimator Estimating Officer, Elect.Executive Engineer, Elect.Executive Engineer,
Elect. Build. Div.Gaya. Elect. Build. Div.Gaya. Elect. Build. Div.Gaya. Elect. Build. Div.Gaya. Elect. Build. Div.Gaya.
B.C.Deptt. B.C.Deptt. B.C.Deptt. B.C.Deptt. B.C.Deptt.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT NO.-4 (1).pdf
NIT • 0.54 MB
Sudhi Patra.pdf
NIT • 0.14 MB
SBD EXCISE office SBD DOC.doc
NIT • 0.69 MB
SBD EXCISE office SBD PDF.pdf
NIT • 0.98 MB
Papper Cutting excise.pdf
NIT • 0.07 MB
Sudhi patra Papper cutting1.pdf
NIT • 0.05 MB
43012_Letter No 5468 dt 15-09-2020.pdf
NIT • 0.46 MB
50850_Check list farwarding.pdf
NIT • 1.76 MB
71391_Letter No 3183 Dated 3-6-2020.pdf
NIT • 1.08 MB
71443_Letter no 7291 E-in-C bcd.pdf
NIT • 0.55 MB
71451_Letter no 7292 E-in- C bcd.pdf
NIT • 0.64 MB
EXCISE OFFICE ARWAL BOQ.pdf
NIT • 1.23 MB
50028 BOQ EXCISE ARWAL.xlsx
NIT • 0.88 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .