Annual repair and maintenance of SDM office at DC Office Mandi (H.P.) (SH- Providing and fixing PVC paneling ceiling and tile works etc). under Head 2059 D.No. 4

Providing and laying Vitrified floor tiles in 600x600mm (six hundred into six hundred millimetre) in size (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in flooring, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one cement: four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilogram per squaremetre) including grouting the joint with white cement and matching pigments etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Finishing with Deluxe Multi Surface Paint system for interiors and exteriors using primer as per manufacturers specifications. Two or more coat applied on walls @ (at the rate of) 1.25 ltr/10 sqm (one point two five litre per ten square metre) over and including one coat of special primer applied @ (at the rate of) 0.75 ltr/10 sqm (zero point seven five litre per ten square metre) of approved brand and manufacture complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ (at the rate of) 0.90 ltr/10 sqm (zero point nine zero litre per ten square metre) over an under coat of primer applied @ (at the rate of) 0.75 ltr/10 sqm (zero point seven five litre per ten square metre) of approved brand and manufacture complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge.

Providing and fixing 10mm (ten millimetre) thick PVC panelling of superiour quality in wall lining with butt joints including fixing with nails and screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 9mm (nine millimetre) thick PVC panel for false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (one hundred twenty grams per squaremetre) (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm (twenty five millimetre into one point six millimetre) ( thick with flanges of 27 mm (twenty seven millimetre) and 37mm (thirty seven millimetre), at 1200 mm (one thousand two hundred millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm (twelve point five millimetre diametre into fifty millimetre) long with 6mm dia (six millimetre diametre) bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm (twenty five into ten into zero point five zero millimetre) of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm (forty five into fifteen into zero point nine millimetre) running at the spacing of 1200mm (one thousand two hundred millimetre) centre to centre, to which the ceiling section 0.5 mm (zero point five millimetre) thick bottom wedge of 80 mm (eighty millimetre) with tapered flanges of 26 mm (twenty six millimetre) each having lips of 10.5 mm (ten point five millimetre), at 450 mm (four hundred fifty millimetre) centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm (two point six four millimetre diametre into two hundred thirty millimetre) long G.I. wire at every junction, including fixing perimeter channels 0.5 mm (zero point five millimetre) thick 27 mm (twenty seven millimetre) high having flanges of 20 mm (twenty millimetre) and 30 mm (thirty millimetre) long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm (four hundred fifty millimetre) centre, with 25mm (twenty five millimetre) long dry wall screws @ 230 mm (at the rate of two hundred thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm (three point five into twenty five millimetre) at 230 mm c/c (two hundred thirty millimetre centre to centre), including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3(three) layers covering upto 150 mm (one hundred fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification but excluding the cost of painting complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing vertical blinds of superior quality complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 18mm thick Prelaminated with decorative lamination on both side exterior Grade-I MDF board make action tesa in Shutter ,shelves/box for cup board with butt joints and fixing with nails and screws etcetera complete with all accessories including carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 4mm (four millimetre) thick plywood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and Fixing decorative high pressure 1.5mm(one point five millimetre) thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing steel foot/Pave including fixing with necessary screws etc. complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing second class teak wood work of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately) complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 35mm (thirty five millimetre) thick second class teak wood panelled glazed or panelled and glazed shutters for doors, windows and clearstory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately,all complete (Note:- Butt hinges and necessary screws shall be paid separately) within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Shifting of bench complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.