REQMT OF TOOL AND EQPTS

Bit Types - Commonly comes with a Slotted tip and a Phillips tip, Blade Length- Ranges between 100 mm to 250 mm, Shaft Material - High-grade Carbon Steel, Chrome Vanadium, Silicon-Manganese steel for high torque and wear resistance, Tip Hardness- Typically ranges from 50 to 58 HRC, Tip Hardness- Typically ranges from 50 to 58 HRC, Handle-Ergonomic, high-grade plastic or rubber offering an anti-slip, oil-resistant, and comfortable grip, Special Features- Many models feature magnetized tips to hold screws and insulation for electrical safety

Material- High Carbon Steel or Chrome Vanadium Steel for rust resistance and durability, Cutting Edge Hardness- Ranges from 52 to 60 HRC, usually achieved via induction hardening to ensure clean, sharp cuts without chipping, 150mm - Ideal for fine electronics, copper, lastic cutting, and household tasks, 200mm - High-leverage models ideal for thicker gauge wire, nails, and cables. Insulation-Many electrical models feature heavy-duty insulated sleeves rated for 1000V AC

8 Inch (200 mm)- Suitable for pipes up to 20 mm with a max capacity of 25 mm, 10 Inch (250 mm)- Suitable for pipes up to 34 mm (1 inch) with a max capacity of 38 mm (1.5 inches), 14 Inch (350 mm) - Suitable for pipes up to 48 mm (1.5 inches) with a max capacity of 50 mm (2 inches)

Material- Typically forged from high-grade manganese steel, chrome-vanadium, or high-tensile carbon steel, Finish- Often coated with chrome plating, bright zinc, or black phosphate to resist rust and corrosion, Length- Varies greatly based on application ranges from 150 mm (6 inches) for light fasteners to 750 mm for heavy industrial box, Rod Thickness (Diameter)- Commonly available in 6 mm, 8 mm, 10 mm, 12 mm, and 16 mm rod diameters to fit varying socket spanner hole sizes, Design-Stepped or tapered ends are often implemented to allow one bar to fit multiple spanner sizes

Abrasion Resistance - Graded 1 to 4, Blade Cut Resistance - Graded 1 to 5, Tear Resistance- Graded 1 to 4, Electrical Safety- Insulating gloves are rated by voltage classes (Class 00 for up to 500V up to Class 4 for 36,000V)

Capacity - 5 TON -Single acting with mechanical lock nut. Stroke- Minimum 50 mm Type of saddle - Grooved saddle suitable for heavy engineering fabrication site. Pistons - Chromium plated pistons. Pump - Pressure at 700 bar Safety feature - Suitable blow out protection. Closed Height - Maximum 100 mm, Oil tank of suitable capacity with level indicator, built in relief valve, drain plug, operating lever etc. Should be designed for use in all positions and alloy steel construction for easy handling. Return spring mechanism suitable for heavy engineering industry. Pressure gauge of suitable size with capacity 0 to 1000 bar. Should have adequate mechanism to prevent dust debris etc from entering to the hydraulic system. High pressure flexible hose of around 3 meter with quick connect disconnect coupler at both ends. Item should be suitable for rugged open area operating conditions and should withstand the extreme weather in dusty, rainy and moist coastal Cochin environment and deliver superior and highly reliable operational performance. Seals used should be able to perform in the above conditions without leakage and should be capable to offer long service life. Relevant test certificates and its procedure shall be submitted during technical evaluation and supply. Supplier to provide detailed technical brochure, operational and maintenance manual with spares part list during technical evaluation and supply. Warranty- One year from the date of commissioning and acceptance at CSL

Load Capacity- 2.5 Ton, Lifting Range- Standard models typically range from 140 mm to 460 mm, while low-profile jacks can reach minimum heights as low as 85 mm to clear lowered vehicles, Weight- Ranges between 13.5 kg and 26 kg heavy-duty workshop models, Pumping Mechanism- Available in single-piston or dual-piston which provides a quicker, more effortless lift, Safety- Built-in overload protection valves and 360-degree swivel rear casters for precise placement

Drive Size - Dictates the size of the square drive connecting to the socket, 1 oblique 4 inch Drive- Best for small fasteners, delicate tasks, and bicycles, 3 oblique 8 inch Drive- The most versatile for general mechanical work and tight spaces, 1 oblique 2 inch Drive- Standard for automotive repair, lug nuts, and heavy equipment, 3 oblique 4 inch and 1 inch Drive- Used for heavy-duty industrial and commercial applications, Torque Range- The minimum and maximum rotational force the tool can accurately measure 10 to 150 ft-lbs or 13.6 to 203.5 Nm, Accuracy- Industry standard is usually between plus minus 3 percent and Plus minus 4 percent

Type size-16 inch, material-Nylon, Demension-460x230

Special Feature-Adjustable Light Modes, Adjustable Strap, High Power, Long Range, Rechargeable, Colour -Black, Power Source- Battery Powered, Light Source Type-LED