Construction of 100 Seated Girls Hostel Building at Rajaputi under Raighar Block

CIVIL WORK Earth work in excavation of foundation in all kinds of soil in foundation within 50M initially lead and 1.50M initially lifts including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.03Mtr in depth & levelling bed etc complete as directed by the Engineer-in-Charges.

Filling foundation and plinth with sand including watering and ramming including cost, conveyance and royality and taxes of all materials and labour with T&P required for the work etc. complete as per specification and direction of Engineer-in-Charge.

Supplying diluting and preparing chemical emulsion like CHLORYPHYIRIPHOS OR other chemicals approved by central insectiside boards or as per directed by the menufacturier and spraying the mixture uniformly by sprayer as per constructional antytormat treatment and creating a chemical barier under and around wall trenches ,basement ,excavation top surface of plinth filling ,unction of wall and floors along with external perimeter of the building surrounding the pipes and conduits etc. complete at the rate of 7.5 liter or as direction by the manufacture per Sqm on vertical and 5.0 liter per sqm on Horizontal surface .50% of the emulsion to be filled in the holes mode in trenches at 150 mm center to center etc. complete as oer IS:6313/1981 Part-11 and as per the direction of Engineer in Charge including all cost of materials labour,taxes etc all complete.

Cement concrete in (1:3:6) using 40mm size Hard Granite Crusher Broken metal including watering and curing,cost,conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete and as per specification and direction of Engineer in Charge.

Fly Ash Brick Masonry work in C.M. (1:6) in F&P using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour etc complete.

Fly Ash. Brick Masonry in C.M. (1:4) in Foundation using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour require for the work etc complete.

RCC work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips incuding watering and curing etc. complete as per direction of Engineer-in charge. A) GROUND FLOOR a) Columns Footing

b) Plinth Beam

c) Columns

d) Lintel Bend

e) Chajja

f) Stair case

g) Roof Slab

h) Roof Beam

B) FIRST FLOOR a) Columns

b) Lintel Bend

c) Chajja

d) Stair case

e) Roof Slab

f) Roof Beam

C) SECOND FLOOR a) Columns

b) Lintel Bend

c) Chajja

d) Roof Slab

e) Roof Beam

Supplying, fitting and placing uncoated HYSD bars reinforcement tying the grills, straighten placing them in position including cost of bindings wire 18 to 20mm gauge including cost of HYSD bar with conveyance and royalty etc. complete and as per technical specification and direction of Engineer-in charge. A) GROUND FLOOR

B) FIRST FLOOR

C) SECOND FLOOR

Fly Ash. Brick Masonry in C.M. (1:6) in Superstructure using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour require for the work etc complete. A) GROUND FLOOR

B) FIRST FLOOR

C)SECOND FLOOR

Fly Ash. Brick Masonry in C.M. (1:4) in Superstructure using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour require for the work etc complete. A) GROUND FLOOR

B) FIRST FLOOR

12mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing, cost, conveyance,taxes and royalties and labour with required for the work etc complete. A) GROUND FLOOR

B)FIRST FLOOR

C)SECOND FLOOR

16mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing, cost, conveyance,taxes and royalties and labour with required for the work etc complete. A) GROUND FLOOR

B)FIRST FLOOR

C)SECOND FLOOR

6mm (1/4”) thick Cement Plaster in C.M. (1:4) finished smooth to RCC Surface including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. A) GROUND FLOOR

B) FIRST FLOOR

C) SECOND FLOOR

12mm thick cement plaster (1:3) on brick work including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges.

Cement Punning including watering and curing, etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges.

Supplying fitting and fixing of vitrified tile in floors of size 600mmx600mm of approved make conforming to IS:13755 laid on 210mm thick Cement Mortar (1:4) (1 Cement : 4 Course Sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-Charge. A) GROUND FLOOR

B)FIRST FLOOR

Providing fitting & fixing Vetrified tiles in dados ,skirtings and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including all cost, conveyance,taxes,royalities etc. complete. A) GROUND FLOOR

B)FIRST FLOOR

Providing fitting & fixing of granite tiles in floor including cost, conveyance etc complete. A) GROUND FLOOR

B)FIRST FLOOR

Fixing of Kota tiles in floors tread or steps and landing on 25mm thick bed on CM(1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete. A) GROUND FLOOR

Providing & fixing of Floor Tiles in floors treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the shade including rubbing and polishing as per the design & drawing with cost of all materials, labour, conveyance, taxes , T&P etc. complete as per the direction of Engineering -in-charge. A) GROUND FLOOR

B)FIRST FLOOR

Fixing of wall tiles in dados, skirting riser of steps on 12mm thick cement plaster CM(1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete. A) GROUND FLOOR

B)FIRST FLOOR

B)FIRST FLOOR

C) SECOND FLOOR

Providing and fixing of 30mm thick WPC Door shutter with hinges, tower bolts , handle, stainless steel screws etc. including the cost of all materials , hardware fittings,cost of all labour, conveyance ,taxes, loading, unloading T&P etc. complete as per the direction of Engineer -in-charge. A) GROUND FLOOR AND FIRST FLOOR

Providing and fixing of WPC Door Frames with Rebate cuts and Finished cross section size 75mmx45mm or 90mmx50mm including cost of all materials, cost of all labour, conveyance , taxes, loading, unloading T&P etc. complete as per the direction of Engineer -in-charge. A) GROUND FLOOR AND FIRST FLOOR

Manufacturing and supplying of M.S. Doors, windows, grills, vantilotors , collarseble gate and doors frame with pannel shuter made out of structural steel plates and bars conferming to IS spesification as per drawing, design, including with all cost, laour, T&P etc complete as per direction of Engineer-in-charge. A) GROUND FLOOR

B)FIRST FLOOR

Supplying ,Fitting and fixing of ISI Marked two track UPVC Sliding Window of approved make with 6mm thick glass of approved quality complete with frame ,shutter and all fitting and fixtures etc. complete as per the direction of Engineer -in-charge. A) GROUND FLOOR AND FIRST FLOOR

Cement concrete in (1:2:4) using 12mm size Hard Granite Crusher Broken chipss including watering and curing,cost,conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete and as per specification and direction of Engineer in Charge. A) GROUND FLOOR

Finishing surface of walls with Cement based Wall Putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes labour T&P required for the work etc. complete. A) GROUND FLOOR

B) FIRST FLOOR

C)SECOND FLOOR

Providing & Painting with two coats to the entire inside surface with Plastic Emulsion Paint of any approved make to the outer surface after scraping and cleaning the surface over Water Bound Cement Primer including all cost of materials, scaffolding, labour T&P etc complete as per direction of Engineer-in-charge. A) GROUND FLOOR

B) FIRST FLOOR

C) SECOND FLOOR

Weathering two coat with any approved Weather coat on new work after scraping and cleaning the surface over one coat of water bound wall primer including watering and curring all cost of materials, scaffolding, labour with T&P etc. complete as per direction of Engineer-in-charge. A) GROUND FLOOR

B) FIRST FLOOR

C) SECOND FLOOR

Painting Two coats (Enamel Paint) with any approved shade on new/Old Doors and windows including all cost, conveyance,tax of materials and labour with T&P required for the work etc complete. A) GROUND FLOOR

B) FIRST FLOOR

C)SECOND FLOOR

Supplying fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @0.90mtr.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing,polishing etc with cost. conveyance, taxes of all materials ,T&P etc. required for the complete as per direction of Engineer in Charge. A) GROUND FLOOR AND FIRST FLOOR

Filling F & P With Excavated materials (2/3 Quantity of Excavation ) including cost and conveyance of all materials ,labour T&P ,Hire charges of machine ,all ,taxes and etc all completes all respects as per direction of Engineer charge.

Provision for Display Board etc.

INTERNAL ELECTRIFICATION Recessed wiring to Light points/fan points/ Exhaust fan/ Call bell in 20mm dia non- metalic flexible Polythine conduit, confir-ming to IS-6946/1973 with 1.5mm² 1.1KV in- sulated, S.C.multistrand HR FR copper wire of ISI marked, Ground Floor Group A

Group B

Group C

First Floor Group A

Group B

Group C

Recessed wiring to 5/6Amps.socket outlet with 2x1.5mm² F.R. PVC Insulated single core multi-strand copper conductor of ISI marked in with 20mm dia non-metalic PVC flexible conduit with 6A. Ground Floor Group A

b) On Existing Board

First Floor Group A

b) On Existing Board

Supplying and fixing of metal box of 180X100Xmm deep (nominal size) on surface or recess with suitable size of phenolic modular sheet cover in front including proving and fixing of 3pin 15/16Amps modular socket outlet and 15/16a modular switch connection painting etc as required Ground Floor

First Floor

Recessed wiring to submain in following size of FR PVC insulated Single core multistrand copper conductor of ISI marked confirming to IS-694/1900 in 20mm dia non-metalic heavy duty flexible conduit 1.5mm thick alongwith FR PVC insulated S.C.multistrand copper conductor as earth wire as required. (Make of wire-Finolex/am Anchor/ Havels/ Polycab) (a) 1x1.5mm2 for Inverter wiring. Ground Floor a)1x 1.5mm2 for inverter wiring

b)2 x 1.5mm2 + 1 x 1.5mm2(Extra wire for Group-b 7 Group-c)

c)2 x 2.5mm2 + 1 x 1.5mm2

d)2 x 4mm2 + 1 x 1.5mm2

First Floor a)1.5mm2 for invert wiring

b)2 x 1.5mm2 + 1 x 1.5mm2(Extra wire for Group-b 7 Group-c)

c)2 x 2.5mm2 + 1 x 1.5mm2

d)2 x 4mm2 + 1 x 1.5mm2

e)3 x 6mm2 + 2x 2.5mm2

First Floor

S/F. of 8Way double door D.Box with 1x40A.DP + 6X6A-32A. S.P.MCB of Havells/L&T/C&S/Legrand make. Ground Floor

First Floor

S/F. of 48" 1200mm Usha-Aure Ivory/Havels-ES Plus (2 Star)/C.G G-Entrust-50 1 Star/Bajaja-Shimmer BBD Pearl Bianco CF make Ground Floor

First Floor

S/F. of 150mm Vantilator/Exhaust fans of Bahar 150 mm Metallic Grey Dom Make. Ground Floor

First Floor

S/F. of step type Electronic fan regulator of cona/Anchor make Ground Floor

First Floor

S/F. of 20Wt LED Tube light fitting of Havels -Lumiline NEO/Crompton-20Wt Laser Ray make. Ground Floor

First Floor

S/F. of 18Wt LED Surafe mounting down lights of Havels-Teim Cosmo Surface Round/Bajaj-SLEEK SURFACE LED make. Ground Floor

First Floor

Supply & Fixing of 9Wt LED Lamps of ISI Marked Ground Floor

First Floor

S/F. of 45Wt. LED Street light fitting of Havels ENDURAPEARLNESOSL/Bajaj-EDGE BRTFG/ Crompton-FREEDOM NEO LSTS-45-CDL-M make Ground Floor

S/F. of 45Wt Surface mounting light of Havels make-PLUTO PANEL (SURFACE)/Bajaj/C.G.LED 2X2 LED fittings: Ground Floor

S/F. of 63A.415V.TPN Main Switch of Havels /L&T/C&S make including all accessories & connection. First Floor

S/F. of 63A.415v.4WAY Copper Bus Bar of Havels make including all connections. First Floor

S/F. of 100A Cubicle Panel board made out of 16SWG C.R.C.A Sheet with power coats & following items:a) 100A.25kA.4pOLE mccb of Havels/L&T/C&S Make-01No.b)Suitable size of Bus Bar complete:-01 nos© 40A.D.P MCB of Havels/L&T/C&S make:;-06 nos(d) Digital volt meter Ammeter-------etc Complete Ground Floor

Providing and Fixing of 4.5 Kgs Capacity CO2 gas type ISI MARKED FIRE EXTINGUISHER (is:15683) fitted with high pressure 1mtr.long diacharge hose & horn complete with refill gas carrying handle and wall mounting bracket tec as required make safex/Fireshield/Ceasefire Ground Floor

First Floor

S/F. of Standard earthing confirming to IS-3043/1987 including S/F. of 38mm/40mm dia heavy duty G.I. pipe 3mtr long confirming to IS-1239/Part-1/1990. The pipe shall have 12mm dia perforated holes at 15cm Interval centre to centre upto 2.5mtr height from the bottom to upper end threaded and fitted with 38mm/40 mm dia G.l. flange Ground Floor

First Floor

Supplying all materials, labour, T&P and fixing standard sized Chromium Plated soap case of Hindware/Jaquar/Parryware complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge CP soap holder

25 mm PVC sch-80 pipes (Sentini/Oriplast/Supreme)

32 mm PVC sch-80 pipes (Sentini/Oriplast/Supreme)

40 mm PVC sch-80 pipes (Sentini/ Oriplast/Supreme)

Second floor 20 mm PVC sch-80 pipes (Sentini/ Oriplast/Supreme)

25 mm PVC sch-80 pipes (Sentini/Oriplast/Supreme)

32 mm PVC sch-80 pipes (Sentini/Oriplast/Supreme)

40 mm PVC sch-80 pipes (Sentini/ Oriplast/Supreme)

wall First Floor

Second Floor

wall First Floor

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge. 250 mm thick wall First Floor

wall First Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. First Floor

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. A) Supplying all materials, labour, T&P and fixing standard sized two way Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange Jaquar CON-041KN. (100 Seated Hostel)

B)Supplying all materials, labour, T&P and fixing standard sized Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Long body Bib Cock Jaquar-CON-047KN. (100 Seated Hostel)

C) Supplying all materials, labour, T&P and fixing standard sized Short Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Short body Bib Cock Jaquar-FLR-5047N.

D)Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange Jaquar CON-059KN.

E)Supplying all materials, labour, T&P and fixing standard sized pillar cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock Jaquar Continental Cat. No.- CON -011KN.

F)Fixing of 25mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)

G)Fixing of 32mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)

H)Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve(shakti make)

I)15mm dia PVC connection pipe 450 mm long

J)15mm dia CP Extention Nipple

K)125mm CP Grating

L)15mm size C.P. flange

M)Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge.

N)Supplying all materials, labour, T&P and fixing 100 mm dia wall mounted over head shower & Shower arm Hindware/Jaquar/Parryware including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineer-in-charge. 100 mm dia CP overhead shower with Arm (Jaquar -OHS-1989, Jaquar SHA 483)

O)Supplying all materials, labour, T&P and fixing standard sized 20mm dia Concealed Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. Concealed stop cock Jaquar CON-083FTK.

Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge. 15mm dia CP Health Faucet of Jaquar 1.2mtr long, 8MM dia Jaquar ALD-577.

Fixing Rotational moulded Poly Propelene double layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts, fixing ball valve etc,including hosting upto a height of 5 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)

110mm U-PVC door Tee

110mm U-PVC offset

110mm U-PVC door bend

110mm U-PVC plain shoe bend

110mm U-PVC vent cowl

110mm P-trap

110mm U-PVC plain bend

Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer-In-Charge. 250mm to 375mm thick wall

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern of Hindware/Jaquar/Parryware with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. 10 Liters capacity PVC cistern with 32mm dia flush bend. Hindware sleek fresh single flush Starwhite, Size 47.6 X 15.5 X 32.5 cm

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) of Hindware/Jaquar/Parryware duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer-In-Charge. Hindware Orissa Pan cat no 20004 Starwhite. Size- 53x41 cm D-Type Quarter (1st,2nd)

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charg

e. EWC with 'p' / S trap plain Hindware Cat No-20087 (S-10) Starwhite type, size-57x35x39 cm, seat cover for Hindware seat cover Premium starwhite. (1st,2nd Floor)

Supplying all materials, labour T&P and fixing wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge. Hindware ARIEL Wash Basin Size - 550mmx400x790mm,

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. 750mmx600mm size B.E.mirror (Alpina/Golden fish/Belgion)

Supplying all materials,labour, T&P and fixing standard sized CP towel rail 24" of Hindware/Jaquar/Parryware complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge 25mmx600mm long CP towel rail.

h.Steel rope with cover

Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge. Inside size 760mm x760mm x450mm

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. a)110 mm dia U-PVC pipes Class-3 (0.60 mpa) (all round concrete)

i.Labour charges for lowering including transportation

b)160 mm dia U-PVC pipes Class-3 (0.60 mpa) (all round concrete)

Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge. Inside size 900mmx900mmx900mm

b.Drilling of 150mm dia bore 31 mtr to above

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials a.Lowering of 200mm dia P.V.C casing pipes i.00 mtr to 30mtr

ii.30 mtr to 45mtr

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length i.200mm dia PVC (sch-80) pipe

Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge i.By DTH Rig

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, t

rial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) a. 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)

b.DOL Control panel

c.40mm dia steel short piece

d.Well cap

e.50mm size CI bracket

f.2.50sqmm flat cable

g.20mm dia rigid UPVC pipes