Loading
Loading…
Loading…
Tender Value
₹5.2 L
EMD Value
₹10,492
Closing Date
6 Jul 2026, 11:00 amDue tomorrow
Executive Engineer (E),
EE(E), PWD EMD (M-251) Ramesh Park Delhi
RMO E and M Services at G-Block D.C. Office Nand Nagri, Delhi. (SH Repairing of VRV/VRF System i/c Gas refilling of Hitachi Make at G-Block, SR-IVA and SR-IVB office.)
2026_PWD_294573_1
39/EE(E)/PWD NES ED/2026-27
Open Tender
Electrical Works
30 days
M-2512
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹10,492
Yes
29 Jun 2026
29 Jun 2026
6 Jul 2026
29 Jun 2026
6 Jul 2026
29 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm | |||||
| 1.1 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2
mm | - | Mtr | - | - |
| 1.2 | 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62
mm | - | Mtr | - | - |
| 1.3 | 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62
mm | - | Each | - | - |
| 2Supply and Gas charging in the extisting VRV/VRF unit of 120 HP Air Conditioners system including vaccumiazation and Nitrogen testing in the existing VRV system and i/c leakge testing and repair commissioning etc. complete as reqd. | |||||
| 3Fabrication, Supplying & Erection of wiremesh enclosure made out of 40x40x5 mm thick (M.S) angle iron & T-section covered with wiremesh of size 75mm x 25mm x 6 SWG thick duly welded on angle iron frame work having and minimum section of T-iron 1 x 1.5 metre i/c having lockable type openable door with heavy duty godown type lock / padlock type lock arrangement & grouting the legs minimum 600 mm depth with cement concrete foundation and painting with one coat of red oxide & two coat of synthetic enamel paint , welding etc. complete as required at site. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.09 MB
BOQ_391673.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid