Supply fitting and fixing of Furniture Godrej Make for HonBle MIC and Secretary Room in 2nd floor at the premises of Haj House Newtown Rajarhat Kolkata 160 during the year 2023 2024 under Bidhannagar East Division

Amount

Supply , Fitting & Fixing of Executive Table With Back Unit. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Size : Executive Table (2350Wx2350Dx750H) Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Gromet provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeonfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. Back Unit (1800Wx500Dx1800H) : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lippingfor body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.

Supply , Fitting & Fixing of Executive Chair. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. *MID BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. The adjustable tilting mechanism is designed with the following features:360' revolving type.Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position Tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1: 2The mechanism housing is made up of HPDC Aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.

Supply , Fitting & Fixing of Visitor Chair. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. The seat and back should be made from seasoned wood and plywood. The same should be upholstered with black synthetic leather and polyurethane foam. BACK SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D) The armrest tube should be made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns). The understructure assembly should be a cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns).

Supply , Fitting & Fixing of 3 Seater Sofa. . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Size : 1810W x 800D x 850H mm.

Supply , Fitting & Fixing of 1 Seater Sofa. . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Size : 875W x 800D x 850H mm.

Supply , Fitting & Fixing of Coffee Table. . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Size : 904W x 444D x 411H mm.

Supply , Fitting & Fixing of Corner Table. . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Size : 600W x 600D x 510H mm.

Supply , Fitting & Fixing of Executive Table With Back Unit. The Supply should Supply , Fitting & Fixing of Executive Table With Back Unit. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Size : Executive Table (2100Wx2250Dx750H) Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Gromet provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeonfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. Back Unit (1800Wx500Dx1800H) : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lippingfor body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.

Supply , Fitting & Fixing of Executive Chair. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn.Full Back Size: 46.5 cm. (W) x 60.0 cm. (H)Seat Size : 51.0 cm. (W) x 49.0 cm. (D)The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression.The support spine should be made up of High Pressure Die cast polished hed Aluminum.The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner. the adjustable tilting mechanism should be designed with the following features:• 360° revolving type• Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• Tilt tension adjustment can be operated in seating position• 5 position Tilt limiter giving option of variable tilt angle to the chair• Seat / back tilting ratio of 1:2• The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron)Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cmThe Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cmThe pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.The neckrest assembly consshould be ts of upholstered Neckrest inner(material-PolyPropylene) with moulded Polyurethane foam and Polyster fabric.Upholstered inner should be fixed to Neckrest cover.Neckrest should be fixed to Back assembly through Neckrest spine .Neckrest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2°

Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

Supply , Fitting & Fixing of Enzo Table . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Table Size : (1500Wx 750Dx 750H), 3Desk with one drawer (RHS) & HDU attachment on one side & 3 drawer unit on the other side (LHS of user) Size 1500 x 750 x 750mm. Prelaminated Particle Board with 18mm thick table top and 15mm thick understructure covered with PVC Lipping. Tables are available in Beech colour only.

Supply , Fitting & Fixing of Mid Back CHair. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. The seat and back shall be made from 1.2 ±0.1cm thk. hot pressed plywood measured and upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 em. thk. HR steel. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.0 to max 54.0cm, Height - min87.5 to max 98.5cm, Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm.

Supply , Fitting & Fixing of 3 Seate Chair. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. This light and portable construction is easy to move around. Comes with wide seats that can easily accommodate cushions for additional comfort. The Unwind’s flat surfaces make it easy to clean and maintain. You will not face and peel-off issues as the poly-propylene edging is injection-moulded in situ along with the desklet. Size : ( 178.4W x56.3Dx 84.0H x 45.2SH )

WELL DECOR

Decor 9