CA NO. CWE /HILLS /RKT/83 OF 2021-2022 SPL REPAIR TO UG SUMP (3 LAKH GALLON CAPACITY) AT CHAUBATTIA UNDER GE RANIKHET

Amount

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed.

M&L for brick work using sub class ‘A’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:3) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate)as in floorings ,using WPC @2 % by weight of cement in UG Sump complete all as specified and directed. (wpc shall be measured &paid separetly)

Dismantling fencing wire mesh any type complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) Beamss, cantilevers, bressummers , lintels over 1.5m span and like this complete all as specified and directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M & L Fair finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc. complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m complete all as specified and directed.

M&L for rendering 15 mm thick stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement includig mixing of water proofing compound of approved make complete all as specified and directed.

M&L for stone walling of squared rubble , regular coursed, well bonded and solidly hearted built in cement mortar 1:4 complete all as specified and directed

M&L for preparing newly plastered or unplastered surfaces of walls and applying three coats of White wash complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete all as specified and directed.

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws & fixed with L type or J- type or crannked hooks bolts in lieu of screw complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws & fixed with L type or J- type or crannked hooks bolts in lieu of screw complete all as specified and directed.

Surface channel in concrete 1:3:6 (40 mm graded aggregate) for drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M & L for providing cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work complete all as specified and directed.

Dismantling wrought iron mild steel work of any description not otherwise provided for complete all as specified and directed.

S& F Roof trusses (framed) trussed purlins, Fe -410 W (Gde E-250 quality - A ) crane gantries rails and fastening (beam, tee, angle channel or flat section ) including distance piecec, cleats etc complete all as specified and directed.

M & L for newly painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for welded Steel wire febric Weight n. Exc 4 kg/sqm supplied and fixed complete to wood or steel member complete all as specified and directed

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed.

Material & Labour for Removing of old paint by removers or burning off by blow lamps and cleaning with scrapers , any coats any width or girth of old steel surfaces of any description, not otherwise description- bed over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of Red oxide primer complete all as specified and directed.

S & F in repair sluice valve of cast iron body flanged and drilled as per IS 14846(ISI Marked)specifications PN-1.6 with stainless nuts, bolts, washer,fibre/rubber gasket, steel spindle including cutting, threading, and connection with flange arrangement of existing pipeline complete and testing of valve after installation as required at site all as specified and directed of size 150 mm complete all as specified and directed..

KUMAON VALLEY CONSTRUCTION