Addition/improvement to Shivalik Guest House and BI Bazar School, Ambala Cantt. (Balance Portion)

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2020.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2020.

M/L RCC work 1:1½:3 for slabs supported on walls, columns , roofs, landing, balconies, canopies deck slabs and in shelves and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC Works.

M/L RCC work 1:1½ :3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC Works.

Providing and laying autoclaved aerated cement blocks masonry with 150 mm/230mm/300mm thick AAC blocks in superstructure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for separately.

M/l brickwork with fly ash brick straight or curved on plan exe. 6m mean radius with designation 75 bricks all as specified in MES SSR 2020.

M/L screed 15-20 mm thick in C. mortar 1:4 for laying of marble/tiles all as sp. in MES SSR 2020.

S/F Ist class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified in MES SSR, 2020.

S/F of 8 mm thick toughened glass door complete with handle, L-connector, D-seal, rubber etc complete all as specified.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, Columns, beams, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)fair finished surface all as sp. in MES SSR 2020.

S/F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all specified in MES SSR, 2020.

M/L PCC floor in cement concrete 1:2:4 fair finished even and smooth without using extra cement (flooring 40mm thick) all as specified in MES SSR 2020.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finishes over and without using extra cement all as specified in MES SSR, 2020.

S/F of 1st class desginer shutter with teak wood in both faces and mouldings any number of panels (Bottom Rails design 8", Middle rails 6" and Top rails 4") complete all as specified.

Ditto but 1st class designer glazed or gauged shutter complete all as specified.

M/L grinding wooden Surface with sand paper 60 no. Filling with wood filler then grinding with 80 no. Sand paper, then again filling wood Filler then grindng with send paper 100 nos. Then wood Filler with stainer and grinding wiht 150 nos. Sand paper filing, then malamine coat, grinding wiht sand paper no. 320. one coat of lacker then final coat of malamine on designer door exc. 1.25 sqm and not exc. 2 sqm.

Ditto, But chowkhats single rebated or double rebated all as specified.

S/F Aluminium Frame (color coated) Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown for widows, doors & partly fixed partly openable frame, including hinges door closer, handle etc. complete all as specified in MES SSR 2020.

M/L point wiring for one light point or one fan point controlled by one switch with cables 1.5 Sqmm in size copper conductor PVC sheathed single core in PVC conduit all as sp. in MES SSR 2020.

Supply and fixing of MS Hose Reel drum 25mm dia flexible pipe having total length of 30 Rm with high pressure nozzle valve complete all as sp.

Supply and fixing of Monoblock pump 3 HP Single Phase (Make : crompton/Kirlosker or Equivalent) Complete all as

Supply and fixing of GI pipe medium weight 25 mm dia laid in Wall/Trenches including short lengths including excavation/chasing to walls and floors including making good all as sp. in MES SSR 2020.

Supply and fixing of Lift/elevator make OTIS/Schindler India/ Mitsubishi/Johnson/kone etc. capacity of 04 person, Ground + 3 floor, traction or hydraulic lift, automatic sliding doors, simple push-button operation, emergency alarm, overload sensor, fire service mode, three-phase AC power supply (space available 5' × 5'), complete all as sp.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

The other works to be carried out shall be payable as per MES Schedule of rate all as specified in MES SSR 2020.