Annual Repair and maintenance of HPPWD Rest House at Larji Tehsil Banjar Distt. Kullu HP

Excavation in foundations, trenches etc. in earth work, in all work and chiselling and wedging out of rocks where blasting is prohibited, lift upto all heights, stacking the excavated soil not more then 3 metres clear from the edge of the excavation and than returning the stacked soil in 15cm layers, wi into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including carriage of material with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing concrete for plain reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202 and 1203 1:3:6 (one cement : three sand : six graded stone aggregate graded stone aggregate 40mm (forty miilimetre nominal size) including the cost of form work and curing complete and hauling/carriage of all labour, equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing and laying cement concrete for plain/reinfocement concrete 1:6:12 (One cement : Six sand :twelve graded stone aggregate 40mm (forty miilimetre nominal size) mechanically mixed in open foundations and plinths complele as per drawings and H.P.P.W.D.specification &MORD technical specification and curing complete including the cost of form work and hauling/carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm. thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc.with wooden battens and ballies in all heights of propping and same for insitu-reinforced concrete and plain concrete work centring below supporting floor to ceiling and removal of the including carriage of material with in all leads and lift of materials and as per direction of Engineer-in-charge.

Flat surfaces such as soffits of suspended floor, roofs, landings and the like:-Floors etc. upto 20mm in thickness with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and Laying Cement concrete 1:2:4 (1 cement:2 coarse sand:4 grade stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required slope and camber in panels as required including consolidation finishing and tamping complete.including hauling carriage of all labour and equipment and material various location throgh all modes of transport by mechanical means with all leads and lifts of material complete as per entire satification and direction of Engineer in Charge.

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specification clause 800,1205.4 RCC 1:1:5:3 (one cement: 1:5:sand: three graded stone agreegate 20mm nominal size ) within all leads and lift of materials and as per direction of Engineer-in- charge. a) Suspended floor, roofs, landing, shelves and their support balconies, beams, girders, bressumer and cantilever.i)upto floor two level.with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing mild steel/tor steel reinforcement for RCC work i/c bending, binding and placing in position complete upto floor two level tor steel.with in all leads and lift of materials and as per direction of Engineer-in-charge.

Half brick masonry in common brunt clay in building work in C.M.1:4 1cement:4sand.i) upto floor two level 20mm thick cement plaster in cement mortar 1:4with in all leads and lift of materials and as per direction of Engineer-in-charge.

20 mm thick cement plaster in cement mortar 1:4 with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing High pressure PVC Spigot and socket waste and ventilating pipe ISI Marked including fixing with approved adhesive etc. Complete.110mm dia.with in all leads and lift of materials and as per direction of Engineer-in-charge.

Supplying and fixing C.I. Cover without frame for septic tank 455x610mm rectangular C.I. Cover (Light duty) the weight of cover to be not less than 23 kg.with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing PVC plain bend ISI Marked including fixing with approved adhesive etc. Complete.110mm dia.with in all leads and lift of materials and as per direction of Engineer-in-charge.

Please Enable Macros to View BoQ information