Loading…
Loading…
Tender Value
₹10.0 L
EMD Value
₹25,100
Closing Date
20 Jun 2026, 5:00 pmDue today
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer,TDB Trivandrum
Office of the Executive Engineer TDB Nanthancode Trivandrum
TDB Headquarters- Repairs and maintenance to canteen building at TDB Headquarters compound and providing weld mesh at garden area (Recast estimate) -reg
2026_TDB_855985_1
EET/eT-12/2026-27
Open Tender
Civil Works - Others
30 days
Nanthancode, TDB Headquarters
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,372
₹25,100
17 Jun 2026
17 Jun 2026
22 Jun 2026
17 Jun 2026
20 Jun 2026
17 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | 1.Repair and maintenance to windows:
Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below | - | Each | 151.6 | - |
| 1.02 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | - | Kg | 597.71 | - |
| 1.03 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | Kg | 723.98 | - |
| 1.04 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1 | m2 | 1,307.23 | ₹1,305.92 |
| 2.01 | 2.Roof waterproofing:
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | - | m2 | 57.76 | - |
| 2.02 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | m2 | 377.98 | - |
| 2.03 | 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | - | m2 | 351.43 | - |
| 2.04 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. | - | Bag | 77.58 | - |
| 2.05 | Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | - | m3 | 13,740.86 | - |
| 2.06 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | - | kg | 114.92 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
BOQ_1447277.xls
BOQ • 0.34 MB
priliminaryagrementcorrected.pdf
Tender Documents • 0.02 MB
Download all tender documents and submit your bid