Development of park at Chinkipora

Providing, fabricating and fixing 360° revolving Vicat gate of 3′-0″ width fabricated from 75 mm dia × 3 mm thick CHS, including rotating assembly with heavy-duty bearing, central shaft, base plate, locking arrangement, welding, cutting, grinding, primer, two coats of synthetic enamel paint, all fixtures, fasteners, carriage, erection and testing, complete in all respects as directed by the Engineer-in-Charge.

Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

12mm Cement plaster of mix in 1 : 4 ( 1 cement : 4 coarse sand) including all carriages.

Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works including all carriages.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work with carriage.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Supplying and filling of good earth carrying by Mechanical Transport , placing, watering, dressing and ramming in layers not over 200mm thick and consolidation with PRR of 8-10 ton capacity including carriage of earth from approved source of supply to site of work complete including Royalty and all carriages.

Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction.

Supplying and fixing three-seater steel bench made of wrought iron legs & arms with seat and back fabricated from 50×25×2.9 mm rectangular hollow MS tubes, supported at mid-span with MS flats, cast iron ornamental side frames/arms, complete with welding, grinding, primer, two coats synthetic enamel paint, transportation, loading/unloading, fixing in CC 1:3:6 platform including excavation, PCC, curing and all incidental works complete. L 63", W 24", H 31". Seating height 15", weight about 60–70 Kg.