Electrical Works at Proposed blood composition seperation unit at the existing Peadiatric Ward Adjacent to the existing blood centre at Ranaghat Sub Divisional Hospital Ranaghat Nadia---EI Works

Distribution wiring in 1.1 KV grade 3 x 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make – Finolex/ Havells/ RR Kabel) in 19 mm bore, 3 mm thick polythene pipe (for horizontal &vertical run in wall and celingportion through prelaidpolythenpipe)complete with all accessories embedded in the wall to light/fan/call bell points with Modular type switch (Make - ABB/Legrand/Schneider) fixed on Modular GI switchboard, top cover plate complete with 3 nos. suitable size “Ph, N & E” copper bar flushed in wall and 175 mm x 100 mm x 65 mm inspection box, making earthing attachment, painting the MS box, mending good damages to original finish - Av. run 8 Mtr. [1(iv)/E-20]

Distribution wiring in 1.1 KV grade 3 x 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make – Finolex/ Havells/ RR Kabel) to 6 A flush type plug socket incl. S&F 240 V 6 A Modular type plug socket & Modular type switch (Make - ABB/Legrand/Schneider) fixed on Moduler GI switchboard with top cover plate flushed in wall incl. mending good damages to original finish - On Board. [3(i)/E-20].

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Make - ABB Tvisha/ Legrand Myrius/ Schneider Opale / Cabree -Murano) with 6 A Modular type switch, without plug top on 4 Module GI Modular type switchboard with 3 Module top cover plate flushed in wall incl. S&F switchboard and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(a)/E-18]

Supply & Fixing 240 V, 4 nos. 16 A, 3 pin Modular type plug socket with 4 nos. 16A Modular type switch(Make - ABB Tvisha/ Legrand Myrius/ Schneider Opale / Cabree -Murano), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. ( 15 / E -17 )

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(13/ E -18)

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Make - ABB Tvisha/ Legrand Myrius/ Schneider Opale / Cabree -Murano) with 6 A Modular type switch, without plug top on 4 Module GI Modular type switchboard with 3 Module top cover plate flushed in wall incl. S&F switchboard and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(a)/E-18]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make - ABB Tvisha/ Legrand Myrius/ Schneider Opale / Cabree -Murano) with 16 A Modular type switch, without plug top on 4 Module GI Modular type switchboard with 3 Module top cover plate flushed in wall incl. S&F switchboard and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(b)/E-18]

S & F of 240 V, 25 A, 3 pins Modular type plug socket (Make - ABB Tvisha/ Legrand Myrius/ Schneider Opale / Cabree -Murano)), without plug top and switch with 2 Module GI Modular type switchboard with top cover plate flushed in wall and making necy. connection with PVC Cu wire and earth continuity wire etc. (For AC Machine). [5(a) / E-17]

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 63 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (18 / D -2)

Supply & Fixing 240 V, 25 A, Modular type starter (Make - ABB/ Legrand/ Schneider) with 25 A Modular switch type SP MCB (C-Curve) and 4 Module GI Modular type switchboard with 4 Module top cover plate flushed in wall incl. S&F switchboard and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[17/E-19].

S&F of Suitable size Single timer box for one no .of Split Type AC fabricated by powder coated MS sheet (16 SWG) with locking arrangement & DIN Rail consisting of following items incl. necy. inter connection by suitable size of stranded PVC insulated 1.1kV Gr. Cu wire after crimping as per direction of EIC :(A) Double door (2+12) way SPNDB with IP 42/43 protection (Make : L&T - 1) No.(B) 32A Power contactor (Make : L&T) - 1Nos.(C) 240V FM1 / DIGITAL Quartz Daily Timer (Make : GIC) - 1 No.(D) One no. red and one no. green 240V LED indicator for indicating auto & bypass indication (Make : L&T) - 1 Set(E) Toggle Switch - 1 Set F) DB end box (Make : L&T ) - 1 No. ( NS). (For AC Machine) (NS)

S & F of 415 V, 4 ways, double door, sheet steel enclosure, IP-43 protection, HTPN MCB DB (Make - Legrand / ABB / Schneider / Siemens) with DIN RAIL concealed in the wall after cutting the wall & mending well the damages to original finish as a three-phase timer DB comprising with 1 no. 415 V, 40 A FP MCB ('C' Curve, 10 kA), 1 no. 24-hour programmable Time Switch with a minimum switching time of 15 minutes, 1 no. 415 V, 40 A 3 pole contactor, 1 no. Auto-Manual bypass Toggle Switch, 2 nos. ON-OFF indication LED lights complete with internal wiring by suitable size of copper wire, including provision for neutral link & earthing attachment. (Make of MCB, Time Switch and Contactor would be the same as per the make of MCB DB) (NS)

S & F of 415 V, 4 module hot press moulded CMC MCB DB box (231 mm x 166 mm x 113 mm) with DIN RAIL, earth bar, neutral bar, transparent window, IP-65 protection and resistant to chemical and atmospheric agent (Make - Syntex, Model no. SIL-CDN4PT/RR) on the wall. (NS)

Supplying and Drawing 1.1 KV Gr. single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make - Finolex / Polycab / RR Kabel / Havells) of the following sizes in the prelaid polythene pipe as per GS. 3 x 1.5 sq. mm [1(b) / E-9 ] )

2 x 2.5 sq. mm + 1 x 1.5 sq. mm [ 1(s) / E-9 ]

2 x 4 sq. mm + 1 x 2.5 sq. mm [1(v) / E-9 ]

4 x 6 sq. mm + 2x 4sq. mm [1(a1) / E-9 ]

4 x10 Sq. mm + 2 x 6 sq. mm [1 (y) / E- 9 ]

4 x 16 sq. mm + 2 x 10 sq. mm [1 (g1) / E- 9 ]

Cutting Channel of size ( 40 mm x 40 mm ) /(43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19/25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles as per GS. 19 mm dia 3 mm thick [ 6(a)/ E- 3 ]

25 mm dia 3 mm thick [ 7 (a)/ E- 3 ]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works 150 mm x 100 mm x 65 mm [11(b)/E-4]

175 mm x 100 mm x 65 mm [11(c)/E-4]

Supply & Fixing bakelite / Perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required 150 mm x 100 mm x 65 mm [12(b)/E-4]

175 mm x 100 mm x 65 mm [12(c)/E-4]

Finishing of the following PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. Page F-5, Item No. 9. 2 x 2.5 sq. mm + 1 x 1.5 sq. mm

2 x 4 sq. mm + 1 x 2.5 sq. mm

4 x 6 sq. mm + 2 x 4 sq. mm

4 x 10 sq. mm + 2 x 6 sq. mm

4 x 16 sq. mm + 2 x 10 sq. mm

S & F of PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [7/E-16] 20 mm size

Supplying and fixing of 415 V, double door, VTPN MCB DB (Make - (Make - Siemens/ Legrand / Havells) up to 160 A MCCB incomer and 63 A MCB outgoing with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ---- [15 / D- 11 ] 8 Way

Supplying and fixing 415 V, 32 A per way double door HTPN MCB DB (Make - Siemens/ Legrand/Havells) with IP-43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ---- [14 / D- 10 ] 4 Way

Supplying and fixing of following rating 240/415 V 2/4 MCB type pole Isolator ( (Make - Siemens/ Legrand/Havells) on din rail of existing DBs and necessary connection. 6 / D-5. 415 V, 63 A FP

Supplying and fixing 415 V, Four Pole MCCB of breaking capacity 25/36 kA with fixed thermal and fixed magnetic setting in VTPN DB and necessary connection. ( Make - Siemens/ Legrand/Havells). 10 / D-8. 160 A

Supplying and fixing 415 V, 63 A TP MCB of Breaking capacity 10kA & C characteristics ( (Make - Siemens/ Legrand/Havells) on din rail of VTPN DBs and necessary connection. 7 / D-6.

Supplying and fixing 240 V, 6/10/16/20/25/32 A SP MCB of Breaking capacity 10 kA & C characteristics ( (Make - Siemens/ Legrand/Havells) on din rail of HTPN and SPN DBs and necessary connection. 7 / D-6.

Supplying and fixing 415V, 160 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make - Siemens/ABB/Schneider/L&T) [ 4( a )/D-3 ]

Supplying and fixing 415V, 250 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make - Siemens/ABB/Schneider/L&T) [ 4( a )/D-3 ]

Supplying and fixing 415 V, 4 pole 250 A Change over switch with sheet steel enclosure on angle iron frame on wall with nuts bolts etc(Make - Siemens/ABB/Schneider/L&T/ Havells ) .( 3b / D-2)

Dismantling the existing working / non working electrical accessories like all kinds of old wirings , MS conduit pipe , main switches, net gurd , TPN & SPN fuse DB , MCB DBs , Busbars , light , fans existing power board , cables , glands, nails, fastener, existing working / damaged panels , incoming & out going cable, etc. at working site and deposit the dismantles items at Hosiptal store with mending good the damages as per direction. ( 2 Nos Semi skilled & 2 No Unskilled ) (NS)

Supplying & fixing indoor recess mounted 230V 50 Hz LED Light on false ceiling ( Make- Philips Green Perform Sleek Cat No -DN296B LED 20S-6500 PSU WH / Crompton CCR-141-24-57-SL-NWH / Wipro ) light fittings complete with all accessories incl. hanging provision suitable for Ghypum ceiling to be fixed in false ceiling by S&F GI wire from ceiling with anchor fasner or bullet, nut, bolt etc. and necy. connection by 2 x 1.5 mm² PVC insulated Cu. Wire as per direction of EIC(Finolex / Polycab make) up to 1.10 mtr length.

Supply of box type, 4 feet long single T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 1x T-LED 22 W /Wipro, Cat No. WIO912208 / Havells Cat No Havells STREAKNEO T8UPTO I X 22 N SSBS WH) ] [NS]

Supply of box type, 4 Feet long twin T-8 LED tube light fittings complete with all accessories [ Make - Phillips, Cat No. - TMC 502 P 2x T-LED 22 W /Wipro, Cat No. WIO922208 /Havells Cat No Havells STREAKNEO T8UPTO 2 X 22 N SSBS WH] [NS]

Supply of 4 feet long 18/20 Watt, polycarbonate LED T-8 lamp (Make - Philips Master LED tube model no. 18W 865 T8 I 2100 lm/Wipro, Cat No. LL13-181-65SESL / Havells Crystal TLI8W LED865 SS Glass ]. [NS]

S& D of 240 V, 9 W B-22,CDL Energy Saver Led Bulb (Make:Philips/Crompton/Wipro).

Supply of 240 V, 1200 mm (48") sweep AC Ceiling fan complete with all accessories [Make -Crompton, 1200 mm Energion Riviera ( W/O Remote ) 32 Watt / Orient Aeroquiet BLDC 1200 MM ( With Remote ) / Atomberg Renesa Alpha , Colour - Brown]

Supply of 240 V, 18" (450 mm) dia whole metal body and metal blade air circular bracket fan (Make - Crompton sstorm2 plus wall fan / EPC 4 Blade wall bracket).

Supply of 1.1 kV Gr. 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cable [Make Gloster/Polycab/ Havells] of following sizes ---- 70 sq. mm (NS)

120 sq. mm (NS)

Laying of following sizes 4 core Armoured/Aluminum conductor cable on wall/surface including S & F MS clamps with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting 90-150 / 185 sq. mm [ F 1 / 2 (e)]

Laying of following sizes 4 core Armoured/Aluminum conductor cable as below after cutting floor/pavement/wall and making holes incl. embedding the cables at an average depth as below and nending good the damages to original finish incl. removing the rubbish 185 sq. mm at an average depth of 100 mm in floor/pavement/wall etc. [ F 3 / 5 (iii)]

Supply & Fixing of perforated GI cable tray with perforation not orethan17.5%suspendedfromceilingwithtwonos.suspenders 25x 25x 3 mm angle iron support incl.S&F GIconnector,6mmdiaMSsuspender,bolts&nuts,steel fastener etc. as required of the following size. Incl. Al painting of MS support (160x50x1.25mm) (18SWG) [ 34(Q) /D15 ]

Supplying and fixing compression type gland complete with brass gland , brass ring & rubber ring for dust & moisture proof entry of XLPE / PVC armoured cables as below Dowels make gland as per GS 4 Core 70 Sq.mm [7(c)/F4 ]

4 Core 120 Sq.mm [7(c)/F4 ]

Finishing of the XLPE / PVC insulated armoured cable ends by crimping method incl. supplying & fixing solder less socket ( DOWELS ) make , tapes , anticorrosive paste & jointing materials as per GS. 4 Core 70 Sq.mm [7(c)/F4 ]

4 Core120 sq.mm [ 8(b)/ F5 ]

Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised Hot Dip MS flat on wall / floor with GI Saddles / floor cutting / existing `L` hook as required and connecting to the equipments including drilled holes with bolts , nuts , washers etc. complete including mending good damages to finish as per GS [ G 3 / 5 d ]

Connecting the equipment to earth bus bar including S & F 4 SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [5(a)(i)/G-2)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe as to GS (2 a / G1 ).

S&F earth bus bar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as reqd. as to GS ( 4 a / G - 2)

Please Enable Macros to View BoQ information