REPAIR/MAINT TO JOINERY, FALSE CEILING, WALL PANELING AND ALLIED WORKS AT BIMBAT AND THASGAM UNDER GE KARGIL

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

S&F in repairs of plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd Class soft wood complete all as specified and directed by Engr-in-Charge.

M&L for 35mm thick 2nd class softwood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

M&L in repair for 30mm thick of 2nd class softwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-in-Charge.

S&F 100mm long (ISI Marked), mild steel butt hinges, medium weight, cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 75mm long (ISI Marked), mild steel butt hinges, medium weight, cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 125mm long anodised aluminium handles, cast type, anodised section complete all as specified and directed by Engr-in-Charge.

S&F 100mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engr-in-Charge.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads area exc 1.5 sqm complete all as specified and directed by Engr-in-Charge.

S&F in repairs 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in framed work, in any position complete all as specified and directed by Engr-in-Charge.

M&L in repair for Plain fillets of second class hard wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.

M&L in repair for Plain fillets of second class hard wood, sectional area exceeding 6 Sqcm but not exceeding 135 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.

S&F in repair 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.

S&F in repair 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on ceiling complete all as specified and directed Engr-in-Charge.

M&L in repair for 6 mm thick plywood, 5 Nos of ply, grade BWP, type BB fixed with nails timber frame-work complete all as specified and directed by Engr-in-Charge.

M&L laminated wooden flooring 8mm thick laid over 2mm thick thermacol over 100 micron polythene film with suitable arrangement including dismantling of existing old one complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surface of any descriptiony , not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for prepration of old painted surface of wood and wood based material and one coat of synthetic enamel paint of any description, not otherwise described over 10cm width or girth complete all as specified and directed by Engr-in-Charge.

S&F in repair anodised aluminium snap grid of size 605*605 mm frame work for false ceiling using aluminium Tee 38 mm*1.30 mm and aluminium angle 23 mm * 23 mm * 1.30 mm with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 4mm thick non-asbestos fiber cement building boards 600mmx600mm complete all as specified and as directed.

All as per srl item No. 28 here-in-before but fixing only except material.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 44,060.00 and any other reduction if any from quoted amount.

M/S MOHD HUSSAIN

M/S ZAKIR HUSSAIN

HARMEET TRADERS

M/S B K ENTERPRISES