Maintenance of Street Lights, High Masts on Delhi PWD Roads under PWD M-South Division during 2026-27

Supplying & erection of flange mounted hot dip galvanized octagonal poles of 5 mtrs. height made from 3 mm thick HT steel plate having bottom dia of 130 mm & top dia of 70 mm complete with window with flash cover at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 225 mm x 225 mm x 12 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination : a) Supply & fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 Nos. GI strip 4 mm thick of suitable length and having suitable size tapped holes - 10 Nos as reqd. b) Supply and fixing 63 amps. terminal block suitable for 25 sq. mm conductor- 4 Nos. & shorting links - 5 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length - 1 Nos. on the existing laminated sheet. c) Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 Nos, earth stud - 1 Nos, welded at suitable height two nos washers, springs washers & nuts. d) Cable support clamp sutiable for 4 Nos. of 4 x 16 sqmm cable.

Providing and laying in position 1:2:4 reinforced cement foundation of size 450mm x 450mm x 800mm deep i/c excavation of earth, providing , cutting, bending and placing in position, 8 nos. reinforcement of cold twisted bars of 12mm dia-860mm long (NS) - & 4 nos. reinforcement ring of cold twisted bar of 8mm dia - 1800mm (NS) equally distanced in lenth of vertical bar as required with positioning of foundation bolts and providing 40 mm (O.D.) DWC, HDPE Pipe of 0.3 mtrs. length for cable entry & exit i/c dismantling of the existing damaged foundation and dispose of the malba at suitable location etc as reqd. (For 3 mtr & 4 mtr. pole)

Supplying and fixing 4 Nos. 20 mm dia X 750mm long Gl foundation bolt (EN8 grade) with nuts. washer including 2 Nos. template of 3mm thick size 225 x 225 mm with 4 nos. 16 mm dia holes, to match with PCD of Pole base plate as reqd.

120 watt

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 5.01) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Fabricating supplying and fixing wiremesh frame work made out of 40x40x6mm thick angle iron having 40x6mm flat strip & wiremesh 6 swg dia m.s wire with 25mmx75mm space in between mesh & top covered for rain protection by 16 SWG MS Sheet and making main door gate having suitable locking arrangement with godown lock (Frame size shall not be more than 60 cm x 90 cm) i/c grouting with cement concrete & primer and spray painting with super synthetic enamel paint of approved colour quality etc as reqd.

4 X 16 Sq. mm.