Shifting of worship structure from near DAV school to Bartunga at Chirimiri Sub Area.

Amount

Item Description

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level: 1:4:8 (1 cement: 4coarse sand: 8 graded stone aggregate 40mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level: 1:2:4 (1 cement: 2coarse sand: 4 graded stone aggregate 20mm nominal size).

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 35 in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement: 6 coarse sand)

Half brick masonary with common burnt clay F.P.S. (non modular) bricks of class designation 35 in foundations and plinth in. cement mortar 1:4 (1 cement : 4 coarse sand).

12mm cement plaster of mix 1:6 (1 cement: 6fine sand)

White washing with lime to give an even shade : New work (three or more coats)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spriral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (labour rate only)

Labour rate for structual steel work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar.

Demolishing cement concrete manually by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 meters lead of : G.S. Sheet.

Dismantling steel work manually by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge.

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved.

Total impact of GST for the purpose of CTC

M/S S K ENTERPRISES

RAKESH KUMAR SINGH