For Misc. Civil works like rennovation of common toilets, minor repair and white wash etc. of Colony residences and Division office at 220 KV Sub Stn., BBMB, Ballabgarh

Amount

Dismantling concrete (cement concrete plain 1:2:4) Ref CSR 2020 8.6(d)

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. Ref CSR 2020 8.26(a)

Dismantling glazed tiles (to be carefully removed).Ref CSR 2020 8.35

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.Ref CSR 2020 9.8

Cement concrete 1:2:4 a)With stone ballast or shingle i) mixing by manual means Ref CSR 2020 10.13(i)

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. Ref CSR 2020 18.18

115mm thick brick wall in cement sand mortar 1:5 without reinforcement in superstructure Ref CSR 2020 11.38

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.Ref CSR 2020 14.72

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours,shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.Ref CSR 2020 14.127

Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including cost of neat coat of cement disposal of rubish to the dumping ground within 50 m lead Ref CSR 2020 31.16

12.5 mm thick cement plaster 1:4 Ref CSR 2020 15.9

Plastering on underside of ceiling 6mm thick cement plaster 1:4 Ref CSR 2020 15.42

White washing (two or more coat) Ref CSR 2020 16.2

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish Ref CSR 2020 16.65

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade Ref CSR 2020 16.10

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. Ref CSR 2020 16.16

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Ref CSR 2020 16.17

Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Single Rebate (60mm x 100mm) Ref CSR 2020 17.15(ii)

Red meranti Normal Super (18 to 19 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position b)Battened and framed 45mm thick taking size of door Ref CSR 2020 17.10 (iii)(b)

Wire gauge fixed on chowkats with 25mm thick Red meranti Normal (15 to 16 kg per cft. Approx.) wood cover molding of full width. Ref CSR 2020 17.13(vi)

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a)300mm x 16mm Ref CSR 2020 17.49(a)

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) ii) For shutter area above 0.50 sqm Ref CSR 2020 17.23(ii)

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.Ref CSR 2020 30.2

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. Ref CSR 2020 30.4

Providing and fixing jet spray with 2'-6" long PVC pipe. a) With C.P. Brass nut Ref CSR 2020 30.8(a)

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. Ref CSR 2020 30.15

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii)Size 550 mm x 400 mm x 815 mm Ref CSR 2020 30.32(ii)

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. i)Vitreous chinaware standard white pedestal for wash hand basin. Ref CSR 2020 30.43(i)

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. a)C.P. brass toilet paper holder. Ref CSR 2020 30.57(a)

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. a) C.P. brass towel Rails size 15mm dia 610mm long Ref CSR 2020 30.58(a)

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. b)C.P brass towel ring Ref CSR 2020 30.58(b)

Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin- charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. a) CP brass Acrylic Shelf size 560mmx130mm Ref CSR 2020 30.59(a)

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. Ref CSR 2020 30.60

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) a)Size 600mmx450mm Ref CSR 2020 30.61(a)

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. vi) PTMT Tap/Bib cock Ref CSR 2020 30.65(vi)

Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect. b) Acrylic liquid soap container Ref CSR 2020 30.67(b)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. e)PVC tube connection of size 15mm x 450 mm with PTMT nut Ref CSR 2020 30.72(e)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches withindicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- a)Wiring fan point (Without fan box) Ref CSR 2020 34.02(a)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches withindicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- b)Wiring light point Ref CSR 2020 34.02(ii)(b)

Providing and fixing Exhaust Fan 300 mm (make Orient/Crompton/Havells/Bajaj, or equivalent) complete in all respect.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface. Ref CSR 2020 16.11

Distempering with dry distemper of approved manufacture two or more coats on old distempetered surface when shade is changed. Ref CSR 2 020 16.9

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. two or more coat to give an even shade Ref CSR 2020 16.13

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint Ref CSR 2020 16.19

Scrapping (a) White wash and colour wash. Ref CSR 2020 8.31 (a)

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect Ref CSR 2020 17.26 (b)(ii)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on one side. Ref CSR 2020 17.46(i)

Distempering with dry distemper of approved manufacture one coat on old distempered work.Ref CSR 2020 16.8

Red meranti Normal (15 to 16 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position (30mm thick) Ref CSR 2020 17.10(ii)(a)

Wire Gauge Red meranti wood Super (18 to 19 kg per cft. Approx.) door shutter without springs housed in chowkats (35mm thick) Ref CSR 2020 17.11(vii)(a)

Chowkats of Red meranti Normal (15 to 16 kg per cft. Approx.) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position. Ref CSR 2020 17.15(vi)

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). Ref CSR 2020 17.23(ii)

20mm thick cement plaster 1:4 in two coat work. Ref CSR 2020 15.20

NARENDER SINGH CONTRACTOR

Chirakshi Construction Co.