Beautification and renovation works at Thandi Sadak Nainital

Amount

Beautification and Renovation work

“Decorative MS cast iron pole in Victorian Architecture style, 8mt high with ornamental base and having a single arm to hold hanging painted panels of size approx.. 1m X 1m, showcasing the different lakes around Nainital or as may be defined by the EIC. The painting should be in high quality and the panels to have decorative frames, matching with the style of the pole. All the steel work to be painted in high gloss enamel paint over primer and the colour to match with the street lamps & railings.”

Thematic 3 D Wall painting Graffity (Murals)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

With cement mortar 1:4 (1cement: 4 coarse sand)

12 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

15 mm cement plaster

1:4 (1 cement: 4 coarse sand)

20 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

Supply & fixing of FRP Pergola indushind 6 Pole Gazebo With Pole Height, 7.6 foot indushindR (gazebo rect)Height of pole from ground 7.6 foot Width of Roof Cover 14 foot Length of Roof Cover 14 foot Roof Material MS Powder Coated Installtion provided by supplier No. of Cover side provided Roof only Side Cover Material MS Powder Coated Roof Material Water proof No. of Pole 6 Frame Material MS Powder coated Pole Material MS Powder coated Roof Material Thickness 3 millimeter Pole Thickness 66 millimeter. Near Aeration Plant Pashan Devi

Supply & Fixing of Potted Flowers:- Round Concrete Flower Pots for Plant (length-18 inch, Width-18 inch, Height-18 inch) Near Pashan Devi/Shani Dev Mandir/DSB Pathway

Supply & Fixing of Benches:- Cast Iron Powder Coating Garden Bench, Capacity 3 Seater Near Pashan Devi/Shani Dev Mandir/DSB Pathway

Supply & Fixing of Dustbins: 2 Bin Mounted with 3 pole Round Round shape 70 ltr. Capacity of each container, SS Grade-304 floor mounted Near Pashan Devi/Shani Dev Mandir/DSB Pathway

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.

20 mm cement plaster of mix :

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade