Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹53.0 LAccepted-AOC 700 PREMNAGAR LINE PAAR VISHNU PURI GALI NO 1 PO IZZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | 1 | Accepted-AOC Being the lowest bidder. | |
| 2 | 2₹53.5 L+₹51,789.50 (0.98%)Rejected-AOC | 2 | Rejected-AOC Being other than the lowest bidder. | |
| 3 | 3₹54.1 L+₹1.1 L (2.08%)Rejected-AOC GE WEST BAREILLY | 3 | Rejected-AOC Being other than the lowest bidder. | |
| 4 | 4₹54.1 L+₹1.2 L (2.19%)Rejected-AOC | 4 | Rejected-AOC Being other than the lowest bidder. | |
| 5 | 5₹60.0 L+₹7.0 L (13.2%)Rejected-AOC | 5 | Rejected-AOC Being other than the lowest bidder. |
Tender Value
₹74 L
EMD Value
₹1.4 L
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HEADQUARTERS, COMMANDER WORKS ENGINEER, MILITARY ENGINEER SERVICES, STATION ROAD, BAREILLY CANTT, PIN 243001
CA NO. CWE BLY / GE(E) / 43 OF 2022-23 SPECIAL REPAIRS TO BUILDING NO P-38 (01 TO 08) OF DEF CIV ACCN AND T-124, T-125, T-126, T-127 AND T-128 UNDER GE (EAST) BAREILLY
2022_MES_538693_1
8200/B/726/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
Class C Category a(i) For Unenlisted Contractor - Meeting enlistment criteria of MES with regard to having satisfactory completed requisite value of work, Annual turnover, working capital , etc as mentioned in NIT.
6 documents required · 6 mandatory
₹100
GE ( E ) Bareilly
₹1.4 L
Yes
11 Sept 2022
16 Jul 2022
27 Aug 2022
16 Jul 2022
20 Aug 2022
6 Aug 2022
Amount
Dismantling/taking down of wooden roof trusses exc 4 m but n.exc 8 m complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) insulation boards / slabs / blankets of any thickness, including cover fillets complete all as specified and directed.
Demolition of cement concrete (un-reinforced) and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.
Demolition/dismantling of RCC beam , chajja , shelve and similar suspended work complete all as specified and directed.
Demolition of cement concrete of any description and in any position (unreinforced) specifically provided complete all as specified and directed.
Demolition of reinforcement cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, pillars, etc,complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.50 Sqm but not exc 4 sqm each complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) not exc 1.50 sqm each complete all as specified and directed.
Taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed .
Taking down eaves gutters and rainwater pipes 75 mm dia , including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and directed
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge.
Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charg.
Dismantling water tanks 250 ltr & n. exc 500 ltr and removing to store of all retrieved material all as directed by Engr-in-Charg.
Dismantling water tanks 500 ltr & n exc 1000 ltr and removing to store of all retrieved material all as directed by Engr-in-Charg.
M&L for rolled mild steel in roof trusses (framed) trussed purlins, crane gantries, rails and fastenings including distance pieces, cleats etc complete all as specified and directed.
M&L for rolled mild steel in rolled section as in main and cross beams, hip and jack rafter, purlins where connected to comman after and running rails, fixed with angle cleats or other connecting plates complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 etc complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washers as specified and directed.
S&F 0.50mm thick prepainted plain galvanised aluminium zinc coating galvanised Mild steel sheeting in ridge, hips, valley gutter,drip and straight flashing fixed with self tapping or cranked hooks bolts complete all as specified and directed.
Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
Providing & fixing 10mm thick plaster of paris false ceiling bending as required shape with two coats of plastic emulsion paint over a coat of primer on decorated surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @750 mm C/C cross member 'U' shaped @450 mm c/c and perimeter of 'C' shaped GI wire mesh having aperture 6.5 mm with 26 gauge wire GI wire 6mm dia or more or FI 40x4mm thick for hanging arrangement with MS suspension.fastner spaced @ 450mm c/c in both direction the 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 Mtr height as required at site complete all as specified and directed.
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, wall band,shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels & wall band over 1.5m span etc complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in chajja, beams etc complete all as specified and directed.
M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto as per Srl item No 32 above but 6mm to 8mm dia bars
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.00mm thick tinted glass fixed with rubber gasket with aluminium beading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 100x44x1.20mm thick with rawl plug. (b) Top and Bottom Rail : 112x44x1.20mm thick. (c) Middle and style : 85x44x1.20mm thick. (d) Aluminium beading : 0.7mm thick. (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of other part of steel heavy duty. (f) Making good of wall surface to match with existing surface complete.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.00mm thick grill and SS mosquito net fixed with rubber gasket with aluminium beading, clips frame made with aluminium box sec as appended below complete all as specified and directed:- (a) Frame 100x44x1.20mm thick with rawl plug (b) Top and Bottom Rail : 112x44x1.20mm thick (c) Middle and style : 85x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of other part of steel heavy duty. (f) Making good of wall surface to match with existing surface complete.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing .
S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Style and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
S&F 100 mm in size butt hinges medium weight stailess steel colled rolled complete all as specified and directed by Engineer-in-Charge.
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing. (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.
S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below:- (i) frame :45.2mm x35mm X 1.15 mm. (ii) Aluminium beading - 0.7mm thick. (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as directed by Engr-in-Charge and all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed
M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded stone aggregate as in floors to receive surface of tile complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M & L 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M & L 9 to 10 mm thick non skid ceramic tiles ( square/ rectangular) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M & L 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L Virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in Vertical surface as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L Virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L Machine cut kota stone slab flooring 18-20 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface incl complete complete all as specified and directed.
M&L Machine cut kota stone slab flooring 18-20 mm thick as in steps, skirting in full length in sigle piece without joint, with groove cutting in double line of stair with laid over cement screed and jointed with rubbing and treating the surface incl bull nosina and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface incl bull nosina complete complete all as specified and directed.
M&L 18-20 mm thick Granite of any type (table rubbed and polished) as in windows cill & cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed.
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.
S&F in repairs vitreous chinaware coloured wash hand basin without pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.
S&F in Vitreous China counter top oval type coloured wash basin suitable size including pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified.
S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.
S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
S&F in repair fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange.
S&F stainless steel of AE - SI 316 grade tubular towel rail 600mm long including apair of CP brass bracket complete all as specified.
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified
S&Fin repair fancy type stainless steel towel rack size 600mm X 300mm including apair of brass bracket complete all as specified & directed.
S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.
S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .
S&F in repairs of 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specifed and directed.
S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mm including making good to floor complete all as specified and directed.
S&F in repair vitreous China coloured European type WC with "P" or "S" trap white including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etcplastic water seat white/black pattern flat bottom and cover and mild stel chroumium plated complete all as specified.
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.
S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S & F 15 mm dia CP health faucet with 1.25 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.
S&F in repairs, vitreous China bowl urinal flat back size 430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.
S&F 500 litres, rotational moulded polyethylene white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed .
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed
S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed
S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed
S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S&F 12 mm thick toughned glass partion wall / sliding with or without powder coated aluminium frame / CP rolling rod with any type of eaching designed on tougned glass , off cuts complete as requirement of site with arrangement for suitable height with off cuts all as spd as directed
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type SS curtain rods with decorative design matching brackets as approved and knobs (lattu) or end bracket as required & other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed. .
S&F in repair Venetian blind coloured strip 75 mm top 5 mm thick powder coated aluminium rod rod ends at brackets are moulded type etc complete all as directed.
M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately)
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over and including a coat of (1mm thick) wall care putty complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over and including (1mm thick ) wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of oil bound distemper over and including 1mm thick wall care putty complete all as specified and directed.
M & L for preparation of new steel surface of any description over 10 cm width or girth , not other description applying two coat of synthetic enamel paint over and including a coat of primer complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete with and including necessary form work etc complete all as specified and as directed.
M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.
M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed.
M&L precast machine pressed glazed rubber moulded kerb stone of PCC 1:2:4, type B0 (using 20mm graded stone aggregates) including weathering, slightly rounded or chamfered angles or throating including filling of joints in cm 1:4 and excavation complete all as specified and directed.
M&L for lean Cement concrete type E-2 1:5:10 ( 40 mm Brick aggregate ) as in filling, mass concrete for sunken floor complete all as specified and directed .
S&F 32mm bore GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finish rough for fixing tiles etc complete all as specified and directed .
M&L rendering 10 mm thick in CM 1:4 on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
M &L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed.
M&L for cool roof anti slip tiles 300x300x10mm with high SRI value not less than 90, laid over roof treatment on accessible roof and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minium 3mm thick and weighing not less than 4 Kg/sqm of make as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately
Supply only liquid water proofing compound
S&F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
S&F for 40mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class HW Factory made 35 mm thick Glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. (Note :- Glass/gauge shall be measured and paid for separately)
Supply and fixed in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F 150mm long floor door stopper aluminium alloy body and tongued anodised, with hard drawn steel spring, fixed in floor all as specified and directed.
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
S&F Steel windows with pressed steel frame (dimension- 95X45X1.25 mm ),side hung shutters including box type hinges with steel handle, and steel peg stay, complete with Glazed openable shutterg with glazing bars( out side shutters) and wire gauged openable shutter without glazzing bars ( inside shutters ),dovetailed or welded complete all as specified and directed all as per Drg NO- TD/088 dt 07 Jan 2002.
S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane all as specified and directed.
S & F 300 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete
S&F for 300mm long aluminium anosdised sliding door bolts, plate type,with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F 18mm thick imported wooden medium density fibre board fixed with frame incl hold fast (as in shutter incl knob in each shutter) etc including magnet catcher built in cup board with all necessay fittings complete all as specified and directed.
S&F hydraulic concealed hinge with clip on installation and integrated silent system, opening angle not less than 100degree for shutter thickness 15-24mm fully overlay type shutters, hinge cup dia 35mm including necessary fixing arrangement with SS screws complete all as specified and directed. Make- Hittich cat No. Onsys 4447i code 928143200/Kaff nickle plated SC hinge 100 degree code KHSC-0/Godrej code 6933
S&F 200mm long stainless steel glossy finish handle with SS screws complete all as specified and directed.
S & F in repair fancy type 150mm size square brass CP shower rose all as specified.
Supply and fix in repairsbrass chromium plated soap dish of size 160x160x90mm complete all as specified and as directed.
S&F 15mm bore but fancy type stop cock chromium plated with long shank and cup (concealed type) stop cock screwed both ends for iron pipe and fixed.
S&F in repairs stainless steel plate rack of size 90x80x25cm made with 1.00mm thick sheet including taking out existing wooden plate rack complete all as specified and directed.
S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed .Model : Cera Cat No B 4711501- satin finish series alma , Parryware Cat No C852399, Kaff Cat No KS610SB (R10) Marco series
Dismantling concrete by chiseling from RCC members like beam, column, parapet, facia, chajja, ceiling etc.exposing the reinforcement without disturbing the reinforcement, make it rust free by sand blasting/ using chemical rustolin to remove rust and acrylic polymer on old rusted surface, providing additional reinforcement by welding to existing reinforcement and binding with 50x50mm(10gauge) welded mesh and provision of guniting pressure 2.2 to 2.5 Kg/Sqm with admixture, 1 cement and 3.5 sand of thickness 25 to 40mm finished even and smooth by providing 10mm thick plaster in cm 1: 4 using liquid water proofing as per manufacturer's instructions including necessary form work and scaffolding up to three storey complete all as specified and directed.
M&L Preparation of new of previously untreated wooden or wood based surfaces of any descriptionnot otherwise described, over 10cm width or girth and applying two coat of synthtic emanelled paint over and including one coat of pink primer complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.
M&L for complete removal existing treatment and preparation of ceiling surfaces and applying two coat of white wash complete all as specified and directed.
Taking down carefully, old unserviceable aluminium point wiring (light, fan, socket, bell, buzzer or power) complete including unserviceable fittings such as switch, socket, ceiling rose, lamp holder, light fittings, bakelite sheet, terminal box, etc. and making good to disturbed surfaces of wall/floor and ceiling etc. and removal, complete all as specified and as directed.
Taking down main switch / MCB/ DBS including MCC Bs etc of any size removing for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of wall, floors etc complete all as specified and directed.
Taking down fan/Exhaust fan of any size, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as direcrted.
Taking down sub main wiring/service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls incuding removing of site complete all as specified and directed.
M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including non metallic rigid PVC concealed conduit with all accessories and 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/exhaust fan/bell point controlled by one switch/bell push complete all as specified and directed.
all as per item no 144 here in before but One 3 pin socket oultel 5 Amp on the same board with other switch complete all as specified and directed.
-Ditto - all as per item no 144 here in before but One 3 pin socket outlet 5 Amp independent complete all as specified and directed.
Ditto -all as per item no 144 here in before but one light point controlled by 2way 5 Amp swicth complete all as specified and directed.
Ditto -all as per item no 144 here in before One 3 pin socket outlet 15 Amps independent with 2.5 Sqmm PVC insulated sheathed cable and 2.5Sqmm cable for earth wire complete all as specified and directed.
S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed.
S&F switch piano flush type single pole two way 5 Amp complete all as specified and directed.
S&F Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.
S&F Bell push flush type 5 Amp complete all as specified and directed.
S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.
S&F Bell AC 230 Volt single pole Ding Dong complete all as specified and directed.
S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.
S&F ceiling rose, 3 terminals, PVC polycarbonate isolated body complete all as specified and directed.
S&F lamp LED heat sink white with polycarbonate diffuser, B-22 base cap, retrofit type , 220/230Volts 9 Watt complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with 1.5 sqmm complete all as specified and as direcrted
S&F LED Tube light fittings 1X/10 Watt,(T-8) 2' long 220V, AC decrotive box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of sutaible size from ceiling rose complete all as specified and directed.
S&F in repairs LED bulk head luminaire 10 watt with Engineering plastic housing and oval shaped clear prismatic diffuser, heat sink integrated including one no. 10Watt LED lamp complete all as specified and directed.
S&F LED building security light fitting 25 Watt, 230Volt, AC outdoor type with high pressure die cast aluminium housing and heat resistance polycorbonate cover complete with driver, lamp and IP-65/66 protection complete all as specified and directed.
S&F LED wall bracket type CITY-2 fitting 9 watt complete all as specified and directed.
S&F stepped type electronic fan regulator flush mounting type, 180Watt, 230Volt complete all as specified and directed.
S&F in repair recess mounting LED ultra slim ceiling light 2'x2' 35/36 Watt complete all as specified and directed.
S&F in repairs round shape 8 Watt 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Hanging only ceiling fan after cleaning, and remarking the serial MES fan nos etc complete including electric connection with three core flexible PVC insulated copper conductor multistranded white in clour 1.0sqmm cable (Item received form Ser Item No 121) complete all as specified and directed.
Fixing only Exhaust fan, cleaning all dust etc from surfaces of any size and remarking the serial MES fan nos. etc complete including electric connection with three core flexible PVC insulated copper conductor multistranded white in colour 1.0 sqmm cable complete all as specified and directed.
M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F MCB, SPN, upto 32 Amps, 230V complete all as specified and directed.
S&F MCB, SP upto 32Amps, 230V complete all as specified and directed.
S&F in repairs GI bracket made out from GI pipe 25/32mm dia, 1.20m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete all as specified and directed.
Taking down service connection/ UG cable removing of site complete all as specified and as directed.
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated soil to distance n.exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M&L for laying bricks, sub class 'B' for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed.
Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness shall be measured and paid)
M& L for Boring holes under road or cutting the road /pavement /hard standing or any other situation by mechanical or other means for inserting 25 to 40mm bore GI pipe for crossing the cable and making good both the ends complete all as specified and directed.
S&F galvanized iron pipe of 40 mm bore, Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.
Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core, laid in duct / along pole/wall etc including making connection including taking down old unsv XLPE cable of any size complete and making good the distrubed surface matching with existing surface complete all as specified and directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door three phase & neutral with 200 Amps rated bus bar complete all as specified and directed.
M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6. mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I 2009. GI wire protected by GI pipe light grade 15mm dia connected to earth test point including excavation in any type of soil, returning filling, disposal of soil, earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) watering pipe and providing layer of charcoal or coke and salt in alternative layers complete as specified or directed & including testng on completion complete all as specified and directed. Note : Tenderers may note that amount of credit Rs 1,52,560.00 will be deducted from the total amount arrived, at the time of Acceptance of contract
SHIV SAI ENTERPRISES
Goel Enterprises
TEAM ACC INFRABUILD PRIVATE LIMITED
Harsha Consultant and Builders
REHAN CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .