COMPREHENSIVE REPAIR AND MAINTENANCE IN THE AOR OF AGE B/R-I AS PER APPROVED CPP FY 2024-25 (SER NO. 19) UNDER GE (A) NO.2 JODHPUR

Amount

Attending complaints of leaking/unserviceable pillar cock, wall mixer, bib taps, two way bib taps, stop valves, 15mm-20mm dia for making it fully functonal and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm-20mm size size complete all as directed and specified.

Attending complaints of leaking/unserviceable low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers, PVC levers, PVC/CP knobs if required complete all as directed and specified.

Attending complaints of internal water supply pipes, fittings and bottle traps for removing of blockages etc of any description incl removing & clearig of air locks etc by pressure pump o ny other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes & fittings with new ones complete all as specified and as directed.

Attending complaints of joinery works including refixing of door hinges, door handels, tower bolts etc, welding of any parts of steel windows/chowkhats if any required at site complete all as specified and as directed. .

M&L for cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 liter but n exc 500 liter, and from mouths of circulating pipes, etc. complete all as specified and as directed. Note: float valve, tank cover etc shall be repaired/ replaced by the contractor if damaged during cleaning without any extra cost.

M&L for cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 liter but n exc 1000 liter, and from mouths of circulating pipes, etc. complete all as specified and as directed. Note: float valve, tank cover etc shall be repaired/ replaced by the contractor if damaged during cleaning without any extra cost.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in in cement mortar (1:6) complete all as specified and directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:4 all as specified.

M&L for applying two coats of cement base paint over a coat of primer on walls including preparation of newly plastered/ pointed surface complete all as specified and directed.

Demoletion of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified & directed.

S&F 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, & in plinth protection templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar (1:4) complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut Kota stone slab 20 mm to 25 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick as in riser / steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for rubberised Chequered cement concrete tiles of size 30 X cm 30 x cm 20mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment laid as in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L vitrified ,coloured and printed tiles of size 600 mmx600 mm x 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match and pointed in white or coloured cement to match the colour of tile complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile colour laid over and including 10 mm thick screed / rendering in CM (1:4) complete all as specified and directed.

M&L for non skid coloured ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Dismantling water tanks of any description in any position exceeding 250 & not exceeding 500 lit capacity complete all as specified and directed.

Dismantling water tanks of any description in any position exceeding 500 & not exceeding 1000 lit capacity complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in white color, hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in white color, hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed/fixed to pipes/ferrules complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonege pipe etc complete including taking down existing WC & fixed new WC in repair including making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S&F in repair Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain and to flush pipe and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified and directed.

S&F in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S & F vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed as in repair.

S&F bib tap in repair, cast copper alloy, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore dia complete all as specified and directed.

S&F Stop valves in repair, ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and directed.

S&F in repair for Swivel shower rose of PTMT , any colour , for fixing with 15 mm dia pipe ,( minium weight 40 gm. ) with and including Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour (Min wt 40gms), fixed complete all as specified and directed .

S&F in repair Stainless steel ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm complete all as specified & directed.

S&F grating doom 100 mm dia of PTMT Min wt 25 grams etc

Supply and fixing in repairs decorative type curtain rod stainless steel finish of pipe 25 mm dia with best quality knob metal complete all as specified & directed.

Supply and fixing in repair purpose made brackets trade pattern for decorative type curtain rods suitable for holding 25 mm dia complete all as specified & directed.

Supply and fixing in repair of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods complete all as specified & directed.

Taking down existing chowkats or frames of any description and in any position exceeding 1.50 sqm but not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position not exceeding 1.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified & directed.

S&F 35 mm thick factory made Plain, framed, 1st class softwood panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick factory made Plain, framed, 1st class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, both faces is covered with commercial type and including S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction with lipping/frame to match complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc as per architectural drawings complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and approved sample complete all as specified and directed.

S&F aluminium grill of design No DG-104 7.5mm thick of decogrill or equivelent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed.

Supplying and fixing aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, etc complete all as specified and directed

S&F 4 levers brass mortice lock, vertical type, size 100 mm complete all as specified and directed.

M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specified( Fe-410-O or 310-O) complete all as specified and directed.

S&F Butt hinges 100 mm, medium weight, cold rolled, mild steel complete all as specified and directed.

S & F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified and directed.

S&F 200 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Taking down steel windows/ ventilators and making good & sorting of materials & remove from site complete all as specified and directed.

Supply & Fix Factory made box type steel window with pintle hinges & 02 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by Engr-in-charge) and (for ref Drg No CEJZ/TD/20 Sheet 1/3 to /3)

Supply & Fix Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge) and (for ref Drg No CEJZ/TD/20 Sheet 1/3 to 3/3)

Supply & Fix Factory made box type steel ventilator with glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified and (for ref Drg No CEJZ/TD/24 Sheet 1/3 to 3/3).

Supply & Fix Factory made box type steel ventilator without glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified and (for ref Drg No CEJZ/TD/24 Sheet 1/3 to 3/3).

Supply and fabrication of framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Preparation of new surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm in width or girth of surfaces complete all as specified and directed.

Taking down existing wire mesh of any discription and in any position and supplying and fixing Stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

Supplying and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:4) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coat of oil bound distemper over two coat of wall care putty on wall surfaces complete all as specified and directed.

Taking up or down steel tubing and connection of 20 mm bore tube of any description & in any position complete all as specified and directed.

Ditto as above but 25 mm bore tubing.-ditto-

Supply and fixing 20 mm dia (nominal)3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

Supply and fixing 25 mm dia (nominal)3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S&F tubular towel rail of brass chromium plated , 20 mm dia, D type, 60 cm long betweem flanges complete all as specified and directed.

M&L for demoletion of concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Taking down of existing damaged / loosened cement concrete/ brick tiles from roof / terrace to a depth of average 50 mm including taking down of existing APP membrance if any , cleaning with water and depositing of debris to a distance not exceeding 50m complete all as specified & as directed by Engineer-in-Charge

M&L Rendering 15mm thick cement mortar 1:4 shall be provided mixed with WPC @3% by weight of cement at green concrete complete all as specified & as directed. Note : WPC shall be measured and paid separately.

Supply only Integral waterproofing compound complete all as specified & as directed

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application over a coat of approved bituminous primer @0.40 liter per Sqm complete all as specified & directed

M&L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate ) average 40mm thick in padding over old cleaned surface of any description on roof / terrace.

S&F as in repairs Corner Glass shelf 250mm superior quality with CP tubular framing & brackets complete all as per sample kept in GE's office.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks/cills etc & the likes complete laid over 15 mm thick in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc and rounding of the edges of stone slabs as in cooking platforms all as directed at site.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc.complete all as specified and directed.

M&L for 25 mm thick Sand stone slabs in plinth protection, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4 over 15mm thick screed bed in CM 1:6 over and including PCC (1:3:6) type C2, (using 20mm graded stone aggregate) as in plinth protection, 50 mm thick, finishing the surface complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F MS work in roof trusses (framed), trussed, rials and fastenings and heavy bracket. Framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc with Fe 410.0 or Fe-310.0 complete all as speciafied and directed.

Dismantling plain or corrugated AC sheeting, any guage of any description and in any position as in roof coverings including connected ridge complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for 12mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in ceiling in GI frame work or with staples on snap grid complete all as specified & directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces complete all as specified and as directed.

M&L for point wiring (Modular point wiring if required with modular accessories cover plate etc.) One light/Fan/bell point/Exhaust Fan controlled by one switch one way complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes,cover plate etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 Volts grade as earth continuity wire including sunken type pressed steel terminal boxes of suitable size with 3mm thick bakelite sheet white/coloured top cover complete all as specified and as directed.

All as per items srl No 109 above but for One socket out let 5 Amps 5 Pin on same board with other switch

All as per items srl No 109 above but for One socket out let 5 Amps 5 pin on independent board

All as per items srl No 109 above but for One light point controlled by two switch two way

All as per item No 109 here in before but with single core multistranded cable of size 2.5 Sqmm for power point and multistanded insulated copper earth continuity conductor of size 1.5 Sq mm all as specified and directed by Engr-in-Charge.

M&L for replacement for Elect bell AC 230 Volts single phase musical type complete all as specified and as directed.

Material and labour in replacement for bell push flush type 5 Amps .

Supply and fixing in replacement switch piano flush type 5 Amps single pole one way.

Supply and fixing in replacement socket out let 2 in 1 multi pin 5 Amps flush type universal

Supply and fixing in replacement switch piano15/16 Amps one way 240 volts

Supply and fixing in replacement socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts.

S&F in replacement modular bell push 6 Amps single module

Supply and fixing in replacement modular switch 6 Amps single module one way.

Supply and fixing in replacement modular socket 6 Amps 5 pin double module.

S&F modular switch 16 Amps single module complete all as directed

Supply and fixing in replacement modular socket 6/16 Amps 5 pin double module.

Supply and fixing in replacement modular switch 6 Amps single module two way.

Supply and fixing in replacement modular Fan step regulator 120W, two module

S&F in repairs capacitor upto 4 MFD suitable for ceiling fan / exhaust fan of any sweep complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and as directed

Supply and fixing in replacement Ceiling rose on PVC FRLS board size 65 X 50 mm three terminal complete all as specified and as directed

Supply and fixing Switch Socket combination 2 in 1, 5 A flush type

Supply and fixing Switch Socket combination 2 in 1, 3 pin, 5/15 Amp flush type universal

Supply and fixing Modular Switch socket outlet combination 3 pin 5 amp' flush type

Supply and fixing Modular Switch socket outlet combination 3 pin, 15 amp, flush type

M&L concealed Modular metal flush box upto upto 8 module and making good all disturbed surfaces of walls to match the existing surfaces complete all as specified and as directed.

Supply and fixing in repairs Modular white cover plate with frame upto 08 module complete all as specified and directed by engineer-in-charge

S&F in repairs 3 pin,6 Amps plug top, 230 V AC complete all as specified and directed by engineer in charge.

S&F in repairs 3 pin,16 Amps plug top, 230 V AC complete all as specified and directed by engineer in charge.

Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps B curve type ,230 volts, 10 KA complete all as specified and as directed

Supply and fixing in repair Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement of old unsv LED Tube light 1 X 20/22 watt (04 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.

S&F in replacement of old unsv LED Tube light 1 X 10 watt (02 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed

Supply and fixing round/square shape not less than 12 watt 220 volts AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F in replacement of old unsv LED Decorative wall light fixture made up of Polycarbonate, suitable for LED Bulb 09/12W (B-22 base) complete all as specified and as directed.

S&F in replacement of old unsv LED Tube light 20 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed.

S&F in replacement of old unsv LED Tube light 10 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed.

Supply & Fixing in replacement LED light fitting 1x10 W Bulk Head lumanaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge. Make:Bajaj/Crompton /Havells/Wipro.

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

Supply and fixing 415V TPN/FP 40-100 Amp 10KA 'C' curve miniature circuit breaker and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 08 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-54 protection complete including taking down old unsv existing DB all as specified and directed. Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface. Make:- Legrand /C&S /L&T /INDOASIAN

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40-63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

M/S KAUTILYA GARG (BID ID -3086368)

Diva Infra (BID ID -3095598)