PROVN OF 01 X TRG ROOM 01X OFFICE CUM REST ROOM FOR DUTY OFFR DUTY CLK AND OVER HEAD SHED FOR GATE NO 01 AND GATE NO 02 AND PROVN OF 01X INCINERATOR NEAR BLDG NO 3111 OFFICE COMPLEX UNDER AGE BR I OF GE ARMY CENTRAL JODHPUR (9081/E8)

Amount

Note:- All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/dense soil, complete all as specified and as directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in any type of soil, complete all as specified and as directed.

M&L for Cement concrete Type D-2 1:4:8 (using 40mm graded crushed aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm thick, complete all as specified and as directed.

Removing excavated material at a level exc. 250 m but n.exc 500 m and depositing where directed starting point, complete all as specified and as directed.

M&L for jodhpur type squared rubble regular coursed stone masonry built in CM 1:6, complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.

M&L for spreading and levelling in layers n.exc 25 cm thick and well ramming including watering as required, complete all as specified and as directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L 40mm thick PCC 1 :2 :4 (using 12.5 mm graded crushed stone agregate) as in DPC, complete all as specified and as directed.

Extra over Jodhpur type stone masonry for hammer dressing to face beds & joints with max depression from a straight edge not exc 20 mm, complete all as specified and as directed.

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3 Cm in length, complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base to floors incl well compacting & laid to levels, complete all as specified and as directed.

S&F 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings,cover stones, & in plinth protection templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4, complete all as specified and as directed.

M&L for Cutting chases in stone walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or sunshades, shelves, lintels, etc.; exc 10 cm but nexc 20 cm, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs rounded or chamfered on edges, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping to parapet walls including necessary form work, complete all as specified and as directed.

"Supply only" integral water proofing compound (ISI Marked), complete all as specified and as directed.

M&L for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS railing/angle iron Steel bars gusset plate etc., complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks triple layer(cylindrical vertical with closed top) hoisted and fixed in position all as specified capacity 1000 ltr, complete all as specified and as directed.

S&F as in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry, Jodhpur type, regular course in CM 1:3, complete all as specified and as directed.

M&L 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even without using extra cement in CM 1:6, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 over stone masonry surfaces & finished fair & even w/o using extra cement using integral water proofing liquid as per mfr instructions, complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces finished even & smooth as in ceilings/ Chajja/ Fascia etc., complete all as specified and as directed.

M&L for preperation of new ceiling surfces & applying three coats of white wash, complete all as specified and as directed.

M&L preperation of newly plastered surfaces of wall and applying two coats of colour wash over a coat of white wash, complete all as specified and as directed.

M&L for applying 2 coats of Oil Bound distemper 3mm each over two coat of Birla/JK putty to new plastered surface to remove all depressions etc incl sand papering the surfaces & obtain a smooth surfaces complete all as specifed. The OBD shall be in one or more colours/ shades, complete all as specified and as directed by Engg-in-charge.

M&L for prep of new surfaces & applying on wall plastered/unplastered two coats of weather coat over a coat of primer, complete all as specified and as directed.

M&L for 25 mm thick Cement concrete type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding, complete all as specified and as directed.

M&L for glazed colour ceramic tiles joint free (premium quality) of size 300x450x7mm, laid in vertical surface dado/skirting etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles over 10 mm thick rendering in CM1:3 over stone masonry surfaces & finished even & rough to receive tiles, complete all as specified and as directed.

M&L for non skid colour ceramic tiles joint free (premium quality) of size area exc 0.11 sqm but nexc 0.18 sqm as in floor set and jointed with neat cement slurry and pointed with white cement including 15mm thick screed bed CM 1:4, complete all as specified and as directed.

M&L For Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed CM 1:4, complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut Kota stone slab flooring ,cooking plate/ trade of steps from etc laid over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 20mm thick screed bed in cement mortor 1:6, complete all as specified and as directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms, slabs for oval type WHB,sinks/cills etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc., complete all as specified and as directed.

M&L for rounding of the edges of stone slabs as in cooking platforms , treads of steps shelves & cills etc., complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,with single shoes double shoes fixed in floor Overall length of cover plate 140mm, complete all as specified and as directed.

M&L for 50 mm thick Cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection & finishing the surface even & smooth w/o using extra cement, complete all as specified and as directed.

S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs, complete all as specified and as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

S&F in repair Soap dish holder, chromium plated , any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S&F as in repairs CP wall mixture 3 in-1 system includingr 1.50m long tele shower and overhead shower of size 150x150mm with flange (ISI Marked), complete all as specified and as directed. Note :- Wall mixture 3-in-1 CP including 1.5m long shower

S&F over head Shower rose 150x150mm of ABS Body chrome plated with grey face plate & with arm having swivel joint chromium plated best quality, complete all as specified and as directed.

S&F health faucet or equivalent with 1200mm long flexible mild steel tube 80mm dia with wall hook and, complete all as specified and as directed and approved by Engineer-in-Charge.

S&F two way angle bib cock chromium plated fancy type 15mm bore /size, complete all as specified and as directed.

S&F light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe, complete all as specified and as directed.

S&F low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve and inclunding PVC connection, complete all as specified and as directed.

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and as directed.

S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F in repairs of chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour, complete all as specified and as directed.

S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' without long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore, complete all as specified and as directed.

S&F as in repairs fancy type , chromium plated anglular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore dia pipe, complete all as specified and as directed.

Writing letters or figures (Black Roman, Italic or Indian) n. exc 30cm high with thick paint, complete all as specified and as directed.

S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe), complete all as specified and as directed.

S&F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc., complete all as specified and as directed.

S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed, complete all as specified and as directed.

S&F 75mm dia CI spun cast iron waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed.

S&F 75mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed.

S&F 100mm dia CI spun cast iron waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed.

S&F 100mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed.

S&F 100mm dia CI bends including cutting of holes, complete all as specified and as directed.

S&F 100mm dia CI connector of length 30 cms including cutting of holes with lead joints, complete all as specified and as directed.

S&F CI single branch piece 100mm dia, complete all as specified and as directed.

S&F CI double branch piece 100mm dia, complete all as specified and as directed.

S&F 75mm dia CI bends including cutting of holes, complete all as specified and as directed.

S&F CI single branch piece 75mm dia, complete all as specified and as directed.

S&F CI double branch piece 75 mm dia, complete all as specified and as directed.

S&F 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S&F 100mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S&F in repairs stainless steel decorative type curtain rod finish of pipe 22 to 25 mm dia with best quality knob, clits for holding metal, complete all as specified and as directed.

S&F factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by engr-in-charge)

S&F factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge)

S&F factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and as directed.

S&F factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, partition, shutters with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr in charge.

M&L for fabrication of glazed windows/louvered ventilators etc using powder coated anodised aluminium sections for frames with or without rebate for hinged/sliding windows (two track/three track), ventilators etc with louveres having suitable mechanism for tilting, U shaped fillets for securing jalies etc & the likes & fixed in position, complete all as specified and as directed. Note : Glass panes & aluminium wiremesh shall be measured & paid for seperately.

S&F powder coated anodised aluminium deco grill as per sample fixed to aluminium frame work of windows & ventilators, complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.35 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with aluminium wire staples, complete all as specified and as directed.

S&F rubber beading, complete all as specified and as directed.

S&F Door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed, complete all as specified and as directed.

S&F brass body 2 levers mortice lock vertical type size 100 mm for aluminium door (as per sample), complete all as specified and as directed.

S&F mild steel work as in doors frames using MS angle / Tee iron Fe-410-W(Gde-E-250) Quality A, complete all as specified and as directed.

M&L for Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L for 35mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides, including provision of suitable blocks for taking mortice locks, latches or other fittings, complete all as specified and as directed.

S&F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a), complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing, complete all as specified and as directed.

M&L for Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing, complete all as specified and as directed.

S&F for Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F Mild steel Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm size, complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters, complete all as specified and as directed.

S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty (all as per the sample), complete all as specified and as directed. Make : YANE/ EVERBRITE or equivalent.

S&F Anodised Aluminium handles 150 mm size 'D' type with plate, complete all as specified and as directed.

S&F 4 mm thick pin headed figured glass in small widths as in louvers of ventilators, complete all as specified and as directed.

3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and as directed.

M&L for prep of new steel surfaces & applying 2 coats of synthetic enamel paint over a coat red oxide primer, complete all as specified and as directed.

M&L prep of new wooded surfaces & applying 2 coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:3 over stone masonry surfaces & finishing even & smooth using extra cement, complete all as specified and as directed.

S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of ante abrasive rubberised material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2, complete all as specified and as directed.

S&F machine made precast cement concrete Kerb stone blocks of approved shape size using Cement concrete 1:3:6 type C1 (20mm stone agg) laid alongside paths /hardstanding jointed & pointed in CM 1:4, complete all as specified and as directed by Engr-in-Charge

M&L for precast RCC 1:2:4 Type B 1 (using 20mm graded crushed stone aggregate) as in manhole/drain cover with hole/without hole hoisted & laying in position, complete all as specified and as directed.

M&L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) for 150 mm dia pipe, complete all as specified and as directed.

Supply & laying jointing and testing 150mm bore reinforced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and as directed.

Cutting into existing manholes for connecting 150 mm new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, complete all as specified and as directed.

Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed.

From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces, complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.

M&L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc, complete all as specified and as directed.

M&L RCC nominal Mix Type B1, 1:2:4 (using 20mm graded crushed stone aggregate) using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc., complete all as specified and as directed.

S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

S&F mild steel TMT bar 8 to 10 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

S&F of water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc.,

M& L for roof treatment in the following stages, complete all as specified and as directed. :- (a) First Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 2.25Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm

S&F steel work in tubular trusses including special shaped washer, bolt etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St- 240, complete all as specified and as directed.

S&F roof trusses (framed), trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing including distance ieces, cleats etc., complete all as specified and as directed.

S&F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with riveted bolted or welding attachement, complete all as specified and as directed.

S&F Fibre glass reinforced translucent plain / corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and as directed.

M&L for Providing precast cement concrete Type B-0 1:2:4 (using 12.50mm graded crushed stone aggregate) set in cement mortar 1:4 for louvres and jallie, cement grill any type moddle of Zafri 25/35mm thick (measured solid), including all mouldings, complete all as specified and as directed.

S&F Precast cement concrete post of size 60 cm long 100 mm X 100 mm, 1:2:4 Type B-1 fixed in CM 1:4 with grooves for fixing of RCC jali, complete all as specified and as directed.

S&F cool roof tiles 300x300mm , 9-10mm thick fixed on 10 mm thick screed bad in CM 1:4 on roof surface, complete all as specified and as directed by Engineer-in-Chage.

E/M ITEM Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLSH), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), (ISI marked) not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked) hylem sheet and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed. :- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

All as per item No. 130 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board, complete all as specified and as directed.

S&F switch flush type single pole one way 6 Amp (ISI Marked), complete all as specified and as directed.

S&F switch flush type single pole one way 16 Amp (ISI Marked), complete all as specified and as directed.

S&F socket out let, 5 pin, 6 Amp FT (ISI Marked), complete all as specified and as directed.

S&F socket out let, 3 pin,16 Amp FT. (ISI Marked), complete all as specified and as directed.

S&F socketed stepped type electonic fan regulator flush type, (ISI Marked), complete all as specified and as directed.

S&F Ceiling rose, 3 terminal/ PVC/ polycarbonate, isolated body, complete all as specified and as directed.

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sqmm flexible cable, complete all as specified and as directed. Make :Crompton/ Havells/ Bajaj.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps (ISI Marked), complete all as specified and as directed.

S&F connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable, complete all as specified and as directed. Make : Havells/ Philips/ CG.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface, complete all as specified and as directed.

S&F MCB Single pole 5 to 30 Amp, 10 KA, (ISI Marked), complete all as specified and as directed. Make : Legrand/ ABB/ Havells

S&F MCB SPN 63 Amp, 10 KA, (ISI Marked), complete all as specified and as directed. Make : Legrand/ ABB/ Havells

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed. Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

S&F Ceiling fan 1200 mm Sweep complete with all accessories including fan blades of WHITE COLOUR, ISI Marked energy efficient 5 star rating Connecting up complete with and including three core flexible PVC insulated multi stranded copper condutor of size 1.0 sqmm from ceiling rose/ conector to fan (earth wire to connected to fan hook) Make : KHAITAN/ CG/ PHILIPS/ USHA

M&L for providing of exhaust fan 300 mm , 230 volt, 50 Hz , steel body, heavy duty electrically and mechanically by all means complete with fastner nut , bolts & washers with louvers, complete all as specified and as directed by Engr-in-Charge.

S&F storage water heater (Geyser) of 25 ltr capacity including grouting of four Nos fashners with nut,bolts & washers of suitable size as directed in wall and making good in the disturbed surface and match with existing surface complete including all electric and water supply connections, complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of water supply PVC connection 15 mm dia with PTMT nuts and washer 45 Cm long, complete all as specified and as directed.

S&F Gund metal gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and as directed.

S&F GI pipe 15mm dia medium grade ISI marked incl cutting fixing arrangements etc., complete all as specified and as directed.

S&F self cosing taps cast copper alloy chromium plated screwed for iron pipe and fixed 15mm bore, complete all as specified and as directed. Make : Mayor/ C-Sons/ G-Sons

S&F desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (Steel body) , body of deser cooler made out of galvanised steel sheet with grade 350 minimum confirming to IS 277 : 1992 , the sump tank manufactured from a sheet of nominal 1 mm thickness sheet and rest of the cabinet from a sheet of nominal 0.8 mm thickness, the front grill shall be made of non- corrosive material with arrangement for adjusting horizontal and vertical direction flow of air, sump tank capacity 100 ltrs, power consumption should be 350 watt all as per IS 3315 : 1994, complete all as specified and as directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 16 sq 4 core in service connection, complete all as specified and as directed. Make : Polycab/ Havells/ Finolex

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/S KAUTILYA GARG