MISC REPAIRS/RECANNING AND POLISHING TO CERTAIN WOODEN FURNITURE UNDER GE MISAMARI

Amount

M&L for fixing Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR DINING made to shape/size as shown on Drawing No. FD-279, FD-203, FD-16 & FD-262 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item No. 1 here in before but for Front legs of CHAIR DINING complete all as specified and as directed..

-Ditto- All as per Item No. 1 here in before but for SIDE RAILof CHAIR DINING complete all as specified and as directed..

-Ditto- All as per Item No. 1 here in before but for FRONT or BACK RAIL of CHAIR DINING complete all as specified and as directed..

-Ditto- All as per Item No. 1 here in before but for BOTTOM STIFFENER of CHAIR DINING complete all as specified and as directed.

-Ditto- All as per Item No. 1 here in before but for BACK STIFFNER/REST of CHAIR DINING complete all as specified and as directed.

-Ditto- All as per Item No. 1 here in before but for BRACKET of size 75x75x25mm in triangular shape/size as shown and fixing with Steel Screws (2 No.) to CHAIR DINING complete all as specified and as directed.

M&L for removing old/worn out rubber shoes and S&F new RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of CHAIR DINING as shown on Drawing No. FD-279, FD-203, FD-16 & FD-262 complete all as specified and as directed.

Re-canning to CHAIR DINING in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 4.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-279, FD-203, FD-16 & FD-262 including taking out old canning, complete all as specified and as directed.

M & L for Polishing two coats to new and old surfaces of Chair Dining after repair with french polish of approved quality including preparation of all surfaces (Drawing No. FD-279, FD-203, FD-16 & FD-262).

M&L for fixing Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR WRITING made to shape/size as shown on Drawing No. FD-20, FD-202, FD-250 & FD-280 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item No. 11 here in before but for FRONT LEG of CHAIR WRITING, complete all as specified and as directed.

-Ditto- All as per Item No.11 here in before but for SIDE RAIL of CHAIR WRITING , complete all as specified and as directed.

-Ditto- All as per Item No. 11 here in before but for FRONT or BACK RAIL of CHAIR WRITING, complete all as specified and as directed.

-Ditto- All as per Item No.11 here in before but for BOTTOM STIFFENER of CHAIR WRITING, complete all as specified and as directed.

-Ditto- All as per Item No.11 here in before but for BACK REST/STIFFENER of CHAIR WRITING , complete all as specified and as directed.

-Ditto- All as per Item No. 11 here in before but for BRACKET of size 75x75x25mm in triangular shape/size as shown on Drawing and fixing with Steel Screws (2 No.) to CHAIR WRITING , complete all as specified and as directed.

M&L for removing old/worn out rubber shoes and S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg for Leg of CHAIR WRITING , complete all as specified and as directed.

M&L Re-canning to CHAIR WRITING in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 3.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-20, FD-202, FD-250 & FD-280 including taking out old/worn out Canning, complete all as specified and as directed.

M & L for Polishing two coats to new and old surfaces of Chair writing after repair with french polish of approved quality including preparation of all surfaces (Drawing No. FD-20, FD-202, FD-250 & FD-280).

M&L for taking down old u/s Arms Rest and fixing of existing size New arm rest made out of 2nd class hard wood duly polished to match the existing Chair all as specified in drg No. FD-20, FD-202, FD-250 & FD-280 and as directed by Engr-in-Charge.

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR DINING OFFICERS made to shape/size as shown on Drawing No. FD/MAP-II/04 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item No. 22 here in before but for Front legs of CHAIR DINING OFFICERS, complete all as specified and as directed.

-Ditto- All as per Item No. 22 here in before but for SIDE RAILof CHAIR DINING OFFICERS, complete all as specified and as directed.

-Ditto- All as per Item No. 22 here in before but for FRONT or REAR RAIL of CHAIR DINING OFFICERS, complete all as specified and as directed.

-Ditto- All as per Item No. 22 here in before but for BOTTOM STIFFENER of CHAIR DINING OFFICERS, complete all as specified and as directed.

-Ditto- All as per Item No. 22 here in before but for BACK REST/STIFFNER of CHAIR DINING OFFICERS, complete all as specified and as directed.

-Ditto- All as per Item No. 22 here in before but for BRACKET of size 75x75x25mm in triangular shape/size as shown and fixing with Steel Screws (2 No.) to CHAIR DINING OFFICERS, complete all as specified and as directed.

M&L for removing old/worn out rubber shoes and S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of CHAIR DINING OFFICERS as shown on Drawing No. FD/MAP-II/04 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for taking down old seat and S&F Seat made up of 12mm thick plywood, grade BWR and 75mm thick foam cushion upholstered with tapestry cloth cover of 650GSM with price not less than Rs350/sqm OF CHAIR DINING OFFICERS, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of CHAIR DINING OFFICERS (Drawing No. FD/MAP-II/04) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR EASY made to shape/size as shown on Drawing No. FD-201 & FD-229 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item No. 32 here in before but for FRONT LEG of CHAIR EASY, complete all as specified and as directed.

-Ditto- All as per Item No. 32 here in before but for SIDE RAIL of Seat of CHAIR EASY, complete all as specified and as directed.

-Ditto- All as per Item No. 32 here in before but for FRONT or BACK RAIL of seat, complete all as specified and as directed.

-Ditto- All as per Item No. 32 here in before but for SIDE RAIL BACK of CHAIR EASY,complete all as specified and as directed.

-Ditto- All as per Item No. 32 here in before but for TOP or BOTTOM RAIL of Back of CHAIR EASY, complete all as specified and as directed.

-Ditto- All as per Item No.32 here in before but for FRONT SUPPORT RAIL of CHAIR EASY, complete all as specified and as directed.

M&L for removing old/worn out rubber shoes and S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws fixing to Leg of CHAIR EASY as shown on Drawing No. FD-201 & FD-229 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L Re-canning to CHAIR Easy in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 4.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-201 & FD-229 including taking out old/worn out Canning, complete all as specified and as directed.

M & L for Polishing two coats to new and old surfaces of Chair writing after repair with french polish of approved quality including preparation of all surfaces (Drawing No. FD-201 & FD-229).

-Ditto- All as per Item No.32 here in before but for ARM REST of CHAIR EASY,complete all as specified and as directed.

M&L shall be provided for replacement of worn out plywood top from Bed Hard with Plywood Top, S&F Plywood Top 12mm thick BWR grade, ISI marked confirming to IS-303 of MAKE : GREENPLY/ARCHIDPLY/ CENTURY in One Piece and fixed with suitable Screws to BED HARD/BED NEWAR as shown on Drawing No. FD-214, FD-245, FD-246 & FD-247 including taking out unserviceable Plywood Top, complete all as specified and as directed.

M &L for replacement of old broken long Rail made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per Drawing No. FD-214, FD-245, FD-246 & FD-247, complete all as specified and as directed.

Making short Rail from old broken long rail (obtain from Item No 44 here-in-before) and fix rest all as per Drawing No. FD-214, FD-245, FD-246 & FD-247, complete all as specified and as directed.

M &L for replacement of old broken legs made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per Drawing No. FD-214, FD-245, FD-246 & FD-247, complete all as specified and as directed.

M & L for taking out all broken worn out component of head board and provide frame with IInd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per Drawing No. FD-214, FD-245, FD-246 & FD-247, complete all as specified and as directed.

-Ditto- All as per ser No 47 here-in-above but Foot Board.

S &F MS clamp L shaped made out of 5mm thick mild steel flat iron of size 100x100x25mm including 2 coats of synthetic enemel paint over a coat of redoxide primer.

M & L for scrapping the wooden surface to Bed Hard/Bed Newar smooth and polishing the same with high class french polish glossy finish (Drawing No. FD-214, FD-245, FD-246 & FD-247) complete all as specified and as directed.

M&L for taking down old u/s Top and fixing New Top SIDE BOARD made out of 18 mm Prelaminated MDF Board exterior grade, ISI marked, as shown on Drawing No. FD-26 & FD-241 , complete all as specified and as directed.

M&L for taking down old u/s Leg and fixing New leg of existing size made out of 2nd class hard wood as shown on Drawing No. FD-26 & FD-241, complete all as specified and as directed.

M&L for taking down old u/s Long Rail and fixing new for New Long Rail of existing size made out of 2nd class hard wood as shown on Drawing No. FD-26 & FD-241 , complete all as specified and as directed.

M&L for taking down old u/s Short Rail and fixing New Short Rail made out of 2nd class hard wood as shown on Drawing No. FD-26 & FD-241, complete all as specified and as directed.

M&L for removing old worn out shutter and supply and fixing new shutter of existing size made out of 18 mm Prelaminated MDF board duly edging 5 mm thick 2nd class hard wood beading as shown on Drawing No. FD-26 & FD-241, complete all as specified and as directed.

M&L for removing old worn out drawer from the side board and S&F new drawer alongwith megnetic catcher of existing size made out of MDF board as shown on Drawing No. FD-26 & FD-241 , complete all as specified and as directed.

-Ditto- All as per Ser No 51 here in above but side LT/RT side of Side Board., complete all as specified and as directed.

M&L for removing old worn out Back from the Side Board and S& F new Back made out of 6mm thick Plywood commercial BWR grade as shown on Drawing No. FD-26 & FD-241, complete all as specified and as directed.

M&L for taking out old worn out knob from the drawer of the table and SF new knob of best quality approved by GE/Engr-in-Charge, complete all as specified and as directed.

M&L for polishing with high class french polish after duly rubbed old polishing layer after scrapping with sand paper glosssy finish complete all as specified and as directed.

S&F TOP of BIN SOILED LINEN made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-244 including taking out unserviceable Top, complete all as specified and as directed.

M & L for removing old worn out bottom from bins, S&F new Bottom made out of 12mm plywood BWR grade irrespective of what shown on drg. Rest all as specified in Drawing No. FD-244 , complete all as specified and as directed.

M & L for removing old worn out sides of the bins and S&F new sides made out of 6 mm thick commercial plywood BWR Grade. as shown on Drawing No. FD-244, complete all as specified and as directed.

Side Caning of Bin in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning. Rest all as shown on Drawing No. FD-244, complete all as specified and as directed.

Taking down old u/s Hinges and M&L for fixing New Hinges ISI Marked size 75mm complete. Rest all as specified in Drawing No. FD-244, complete all as specified and as directed.

-Ditto- All as per item No 61 here-in-above but Bin Soiled Linen complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LEG of STOOL DRESSING as showduly polished with french polish as shown on Drawing No. FD-282 including taking out unserviceable Leg, complete all as specified and as directed.

-Ditto- All as per Item No. 67 here in before but for SIDE RAIL of STOOL DRESSING complete all as specified and as directed.

-Ditto- All as per Item No. 67 here in before but for STIFFENER of STOOL DRESSING complete all as specified and as directed.

M&L Re-canning to STOOL DRESSING in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 3.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-282 including taking out old canning, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of of STOOL DRESSING (Drawing No. FD-282) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F MIRROR 5.0mm thick of MAKE : MODI GUARD/ATUL of TABLE DRESSING LADIES as shown on Drawing No. FD-251& FD/MAP-II/07 including taking out unserviceable Mirror, complete all as specified and as directed.

Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in Drawing No. FD-251& FD/MAP-II/07, complete all as specified and as directed.

Removing UNSV Top and S&F new top made out of 18 mm thick pre laminated MDF board exterior grade, ISI Marked . Rest all as specified on Drawing No. FD-251& FD/MAP-II/07 complete all as specified and as directed.

S&F for removing old worn out bottom from Table dressing ladies and Bottom made out of 12mm thick BWR grade plywood, complete all as specified and as directed.

M&L for removing old worn out drawer from the table and S&F new drawer made out of 12mm thick BWR grade plywood as specified on Drawing No. FD-251& FD/MAP-II/07 , complete all as specified and as directed.

M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified, on Drawing No. FD-251& FD/MAP-II/07 , complete all as specified and as directed.

M&L for removing unservicable Legs from the table and SF new Legs made out of 2nd class H/W. Rest all as specified on Drawing No. FD-251& FD/MAP-II/07, complete all as specified and as directed.

M&L for removing UNSV Glass sliding shutter with aluminium channel from table and S&F new Glass shutter made out of 4mm thick glass plain with aluminium channel 20 mm width. Rest all as specified on Drawing No. FD-251& FD/MAP-II/07, complete all as specified and as directed.

M&L for polishing Table dressing ladies with mirror with high class french polish after duly rubbed old polishing layer after scrapping with sand paper.Rest all as specified on Drawing No. FD-251& FD/MAP-II/07, complete all as specified and as directed.

S&F MIRROR 5.0mm thick of MAKE : MODI GUARD/ATUL of TABLE DRESSING GENTS as shown on Drawing No. FD/E6/MAP/16 including taking out unserviceable Mirror, complete all as specified and as directed.

S&F BACK of Plywood 12.0mm thick, BWR grade for Mirror of TABLE DRESSING GENTS as shown on Drawing No. FD/E6/MAP/16 duly polished with french polish including taking out unserviceable Plywood Back, complete all as specified and as directed.

-Ditto- All as per item No 74 here-in-above but Table Dressing Gents , complete all as specified and as directed.

-Ditto- All as per item No 75 here-in-above but Table Dressing Gents complete all as specified and as directed.

M&L for removing of U/S Glass Shelves and M&L for fixing new 5mm thick glass shelves as per size shown on Drawing No. FD/E6/MAP/16, complete all as specified and as directed.

M&L for polishing Table dressing with gents with mirror with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. FD/E6/MAP/16), complete all as specified and as directed.

S&F TOP of BOOK CASE made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-45, FD-45(M) & FD-237 including taking out unserviceable Top, complete all as specified and as directed.

M&L for removing old UNSV broken legs from the frame for fitting new legs duly made out of II nd class hard wood. Rest all as per Drawing No. FD-45, FD-45(M) & FD-237, complete all as specified and as directed.

M&L for removing old UNSV broken long rail from the frame for fitting new rail duly made out of II nd class hard wood. Rest all as per Drawing No. FD-45, FD-45(M) & FD-237, complete all as specified and as directed.

M&L for removing old UNSV broken short rail from the frame for fitting newrail duly made out of II nd class hard wood . Rest all as per Drawing No. FD-45, FD-45(M) & FD-237, complete all as specified and as directed.

M&L for removing old worn out shutter and supply and fixing new shutter made out of 5mm thick Glass pane . Rest all as per Drawing No. FD-45, FD-45(M) & FD-237, complete all as specified and as directed.

M&L for removing old worn out Shelves from the Book case S&Fnew shelves made out of 18/19mm Prelaminated MDF board exterior grade, ISI marked and duly edging with 5mm thick 2nd class hard wood. Rest as specified on Drawing No. FD-45, FD-45(M) & FD-237, complete all as specified and as directed.

-Ditto- All as per Ser No 87 here in above but side LT/RT, complete all as specified and as directed.

-Ditto- All as per Ser No.87 herein above but 6mm ply irrespective of drawing, complete all as specified and as directed.

M&L for polishing Book Case with high class french polish after duly rubbed old polishing layer after scrapping with sand paper. (Drawing No. FD-45, FD-45(M) & FD-237) complete all as specified and as directed.

S&F TOP of TABLE WRITING made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-275 & FD-33(M) including taking out unserviceable Top, complete all as specified and as directed.

M& L for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete on Drawing No. FD-275 & FD-33(M) , complete all as specified and as directed.

M& L for removing U/S long rail from the table including supply and fixing new long rail made out of 2nd class HW complete ( Drawing No. FD-275 & FD-33(M)), complete all as specified and as directed.

M& L for removing U/S short rail from the table including supply and fixing new short rail made out of 2nd class HW complete, (Drawing No. FD-275 & FD-33(M)), complete all as specified and as directed.

M& L for removing U/S stiffener from the table including supply and fixing new stiffener made out of 2nd class HW complete (Drawing No. FD-275 & FD-33(M)), complete all as specified and as directed.

Removing U/S old broken drawer and S & F new ,made out of 2nd class Hard Wood well seasoned & MDF board. All as shown on Drawing No. FD-275 & FD-33(M), complete all as specified and as directed.

Removing old u/s back side board and replace with 6mm thick (BWR) commercial ply, complete all as specified and as directed.

Removing old u/s side board and replace with 19mm MDF board with teak finish (One side), complete all as specified and as directed.

M& L for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete as shown on Drawing No. FD-275 & FD-33(M), complete all as specified and as directed.

-Ditto- All as per item No 97 here-in-above but Shutter, complete all as specified and as directed.

M&L for polishing Table writing with mirror with high class french polish after duly rubbed old polishing layer after scrapping with sand paper, complete all as specified and as directed.

M & L for removing old/worn out rubber shoes with S & F new rubber shoe of superior quanlity with steel plated screws of suitable size (Drawing No. FD-275 & FD-33(M) complete all as specified and as directed.

S&F TOP of TEAPOY made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-232 & FD-278 including taking out unserviceable Top, complete all as specified and as directed.

M&L for removing U/S long rail S&F New Long Rail made out of 2nd class hard wood, complete all as specified and as directed.

M&L for removing U/S short rail S&F New Short Rail made out of 2nd class hard wood, complete all as specified and as directed.

M&L for removing U/S Stiffener S&F New stiffener made out of 2nd class hard wood, complete all as specified and as directed.

M&L for removing U/S Leg S&F New Leg made out of 2nd class hard wood complete, complete all as specified and as directed.

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item as shown on Drawing No. FD-232 & FD-278 , complete all as specified and as directed.

M&L for polishing Teapoy with high class french polish after duly rubbed old polishing layer after scrapping with sand paper. complete all as specified and as directed.

S&F TOP of TABLE CENTRE of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0 mm thick all round as shown on Drawing No. FD-235 & FD-274 including taking out unserviceable Top, complete all as specified and as directed.

-Ditto- All as per Item No.115 here in before but for LONG RAIL of TABLE CENTRE, complete all as specified and as directed..

-Ditto- All as per Item No.115 here in before but for SHORT RAIL of TABLE CENTRE, complete all as specified and as directed..

-Ditto- All as per Item No. 115 here in before but for STIFFENER of TABLE CENTRE, complete all as specified and as directed.

-Ditto- All as per Item No.115 here in before but for LEG of TABLE CENTRE, complete all as specified and as directed.

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item as shown on Drawing No. FD-235 & FD-274 , complete all as specified and as directed.

M&L for polishing Table centre with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. FD-235 & FD-274) complete all as specified and as directed.

S&F TOP of PEG TABLE made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-236 & FD-277 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of PEG TABLE as shown on Drawing No. FD-236 & FD-277 including taking out unserviceable Long Rail, complete all as specified and as directed.

-Ditto- All as per Item No.123 here in before but for SHORT RAIL of PEG TABLE, complete all as specified and as directed.

-Ditto- All as per Item No.123 here in before but for STIFFENER of PEG TABLE, complete all as specified and as directed.

-Ditto- All as per Item No.123 here in before but for LEG of PEG TABLE, complete all as specified and as directed.

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item as shown on Drawing No. FD-236 & FD-277 , complete all as specified and as directed.

M&L for polishing Peg Table with mirror with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. FD-236 & FD-277) complete all as specified and as directed.

S&F TOP of TABLE DINING 6 PERSONS made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Top, complete all as specified and as directed.

-Ditto- All as per Item No. 129 here in before but for LONG RAIL of TABLE DINING 6 PERSONS , complete all as specified and as directed.

-Ditto- All as per Item No. 129 here in before but for SHORT RAIL of TABLE DINING 6 PERSONS , complete all as specified and as directed.

-Ditto- All as per Item No. 129 here in before but for STIFFENER of TABLE DINING PERSONS , complete all as specified and as directed.

-Ditto- All as per Item No. 129 here in before but for LEG of TABLE INING 6 PERSONS , complete all as specified and as directed.

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item as shown on Drawing No. FD-273 & FD-329, complete all as specified and as directed.

M&L for polishing Peg Table with mirror with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. FD-273 & FD-329 , complete all as specified and as directed.

S&F TOP of TABLE DINING 8 PERSONS made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Top, complete all as specified and as directed.

-Ditto- All as per Item No. 136 here in before but for LONG RAIL of TABLE DINING 8 PERSONS, complete all as specified and as directed.

-Ditto- All as per Item No. 136 here in before but for SHORT RAIL of TABLE DINING 8 PERSONS, complete all as specified and as directed.

-Ditto- All as per Item No. 136 here in before for STIFFENER of TABLE DINING 8 PERSONS, complete all as specified and as directed .

-Ditto- All as per Item No. 136 here in before but for LEG of TABLE DINING 8 PERSONS, complete all as specified and as directed.

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item as shown on Drawing No. FD-273 & FD-329, complete all as specified and as directed.

M&L for polishing Table dining 8 persons with high class french polish after duly rubbed old polishing layer after scrapping with sand paper. (Drawing No. FD-273 & FD-329), complete all as specified and as directed.

S&F TOP of TABLE 3'x2' W/O DRAWER made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-223, FD-231 & FD-284 including taking out unserviceable Top, complete all as specified and as directed.

-Ditto- All as per Item No. 143 here in before but for LONG RAIL of TABLE 3'x2' W/O DRAWER, complete all as specified and as directed.

-Ditto- All as per Item No. 143 here in before but for SHORT RAIL of TABLE 3'x2' W/O DRAWER, complete all as specified and as directed.

-Ditto- All as per Item No. 143 here in before but for STIFFENER of TABLE 3'x2' W/O DRAWER, complete all as specified and as directed.

-Ditto- All as per Item No. 143 here in before but for LEG of TABLE 3'x2' W/O DRAWER, complete all as specified and as directed.

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item as shown on Drawing No. FD-223, FD-231 & FD-284, complete all as specified and as directed.

M&L for polishing Table 3'x2' W/O Drawer with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. FD-223, FD-231 & FD-284), complete all as specified and as directed.

S&F TOP of TABLE 3'x2' WITH DRAWER made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE 3'x2' WITH DRAWER duly polished with french polish as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284 including taking out unserviceable Long Rail, complete all as specified and as directed.

-Ditto- All as per Item No. 150 here in before but for SHORT RAIL of TABLE 3'x2' WITH DRAWER, complete all as specified and as directed.

-Ditto- All as per Item No.150 here in before but for STIFFENER of TABLE 3'x2' WITH DRAWER, complete all as specified and as directed.

-Ditto- All as per Item No. 150 here in before but for LEG of TABLE 3'x2' WITH DRAWER, complete all as specified and as directed.

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284, complete all as specified and as directed.

M&L for polishing Table 3'x2' W/O Drawer with high class french polish after duly rubbed old polishing layer after scrapping with sand paper. (Drawing No. FD-223, FD-231,FD-283 &FD-284), complete all as specified and as directed.

Removing U/S old broken drawer and S & F new ,made out of 6mm plywood commercial BWR grade, all as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284, complete all as specified and as directed.

S&F TOP of TABLE OFFICE CLERK WOODEN made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. WDF-32 including taking out unserviceable Top, complete all as specified and as directed.

-Ditto- All as per Item No. 158 here in before but for LONG RAIL of TABLE OFFICE CLERK WOODEN, complete all as specified and as directed .

-Ditto- All as per Item No. 158 here in before but for SHORT RAIL of TABLE OFFICE CLERK WOODEN, complete all as specified and as directed .

-Ditto- All as per Item No. 158 here in before but for STIFFENER of TABLE OFFICE CLERK WOODEN, complete all as specified and as directed .

-Ditto- All as per Item No.158 here in before but for LEG of TABLE OFFICE CLERK WOODEN, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE OFFICE CLERK WOODEN as shown on Drawing No. WDF-32 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for polishing Table Office Clerk Wooden with mirror with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. WDF-32) complete all as specified and as directed.

S&F DRAWER of Plywood Board 6.0mm thick (BWR) commercial for TABLE OFFICE CLERK WOODEN (Drawing No. WDF-32) as shown on drawing, complete all as specified and as directed.

S&F TOP of TABLE OFFICE OFFICER WOODEN made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. WDF-31 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE OFFICE OFFICER WOODEN duly polished with french polish as shown on Drawing No. WDF-31 including taking out unserviceable Long Rail, complete all as specified and as directed.

-Ditto- All as per Item No.166 here in before but for SHORT RAIL of TABLE OFFICE OFFICER WOODEN, complete all as specified and as directed.

-Ditto- All as per Item No.166 here in before but for LEG of TABLE OFFICE OFFICER WOODEN, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE OFFICE OFFICER WOODEN as shown on Drawing No. WDF-31 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for polishing Table office officer wooden with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. WDF-31) complete all as specified and as directed.

S&F DRAWER of Plywood Board 6.0mm thick (BWR) commercial for TABLE OFFICE OFFICER WOODEN duly polished with french polish as shown on Drawing No. WDF-31 including taking out unserviceable Drawer, complete all as specified and as directed.

S&F TOP of TABLE BED SIDE made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-236 & FD-276 including taking out unserviceable Top, complete all as specified and as directed.

-Ditto- All as per Item No.173 here in before but for SIDE (LT & RT) of TABLE BED SIDE, complete all as specified and as directed.

S&F BACK of Plywood 6.0mm thick, BWR grade for TABLE BED SIDE as shown on Drawing No. FD-236 & FD-276 including taking out unserviceable BACK, complete all as specified and as directed.

M&L for polishing Table office officer wooden with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. FD-248 & FD-276), complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR WBB made to shape/size as shown on Drawing No. FD-225 & FD-284 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item No. 177 here in before but for FRONT LEG of CHAIR WBB, complete all as specified and as directed.

-Ditto- All as per Item No. 177 here in before but for SIDE RAIL of CHAIR WBB, complete all as specified and as directed.

Taking down old u/s Seat Frame and M&L for New Seat Frame made out of Iind class H/W and 6mm thick BWR grade Plywood ISI Marked complete as shown on Drawing No. FD-225 & FD-284, complete all as specified and as directed.

-Ditto- All as per Item No.177 here in before but for BOTTOM STIFFENER of CHAIR WBB, complete all as specified and as directed.

-Ditto- All as per Item No. 177 here in before but for BACK REST of CHAIR WBB, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of CHAIR WBB as shown on Drawing No. FD-225 & FD-284 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for polishing Chair WBB with high class french polish after duly rubbed old polishing layer after scrapping with sand paper (Drawing No. FD-225 & FD-284) complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) FRONT/REAR LEG of SOFA SET 4 SEATER, made to shape/size as shown on Drawing No. FD-281/FD/MAP-II/02 duly polished with french polish including taking out old Front/Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item no.185 here in before but for SIDE/BACK/FRONT RAIL of SOFA SET 4 SEATER,complete all as specified and as directed.

-Ditto- All as per Item no.185 here in before but for BATTEN for SEAT/ BACK of SOFA SET 4 SEATER, complete all as specified and as directed.

-Ditto- All as per Item no.185 here in before but for ARM of SOFA SET 4 SEATER, complete all as specified and as directed.

M&L FOAM CUSHION SEAT and BACK. 100mm thick 40 density MAKE : KURLON/SLEEPWELL covered with Tapestry Cloth superior quality duly stitched with fine standard thread and providing best quality Chain with Runner on One Side as approvd by GE, suitable for SEAT of SOFA SET 4 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Seat with Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of SOFA SET 4 SEATER (Drawing No. FD-281/FD/MAP-II/02) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of SOFA SET 4 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L CUSHION COVER made out of approved Tapestry Cloth suitable for FOAM CUSHION SEAT or BACK of size 21"x22"x4" duly stiched with Fine Standard Thread and providing best quality Chain with Runner on One Side and fixing to SOFA SET 4 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

M&L Second Class Hardwood (seasoned Timber) FRONT/REAR LEG of SOFA SET 5 SEATER, made to shape/size as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Front/Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item no. 193 here in before but for BACK/FRONT RAIL of single seater, complete all as specified and as directed.

-Ditto- All as per Item no.193 here in before but for BATTEN for SEAT/ BACK of SOFA SET 5 SEATER, complete all as specified and as directed.

-Ditto- All as per Item no. 193 here in before but for ARM of SOFA SET 5 SEATER, complete all as specified and as directed.

M&L FOAM CUSHION SEAT and BACK 95 to 100mm thick 32 density MAKE : KURLON/SLEEPWELL covered with Tapestry Cloth superior quality duly stitched with fine standard thread and providing best quality Chain with Runner on One Side as approvd by GE, suitable for SEAT of SOFA SET 5 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Seat with Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

-Ditto- All as per Item no. 193 here in before but for BACK/FRONT RAIL of 3 seater of SOFA SET, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of SOFA SET 5 SEATER (Drawing No. FD-281/FD/MAP-II/02) and applying Two or more Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of SOFA SET 5 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L CUSHION COVER made out of approved Tapestry Cloth suitable for FOAM CUSHION SEAT or BACK of size 21"x22"x4" duly stiched with Fine Standard Thread and providing best quality Chain with Runner on One Side and fixing to SOFA SET 5 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

M&L Second Class Hardwood (seasoned Timber) FRONT/REAR LEG of SOFA SET 3 SEATER, made to shape/size as shown on Drawing No. FD-281 including taking out old Front/Rear Leg, complete all as specified and as directed.

-Ditto- All as per Item no. 202 here in before but for BACK/FRONT RAIL of single seater, complete all as specified and as directed.

-Ditto- All as per Item no.202 here in before but for BATTEN for SEAT/ BACK of SOFA SET 3 SEATER, complete all as specified and as directed.

-Ditto- All as per Item no. 202 here in before but for ARM of SOFA SET 3 SEATER, complete all as specified and as directed.

M&L FOAM CUSHION SEAT and BACK 95 to 100mm thick 32 density MAKE : KURLON/SLEEPWELL covered with Tapestry Cloth superior quality duly stitched with fine standard thread and providing best quality Chain with Runner on One Side as approvd by GE, suitable for SEAT of SOFA SET 3 SEATER as shown on Drawing No. FD-281 including taking out old Cushion Seat with Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

-Ditto- All as per Item no. 202 here in before but for BACK/FRONT RAIL of 3 seater of SOFA SET, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of SOFA SET 5 SEATER (Drawing No. FD-281) and applying Two or more Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of SOFA SET 3 SEATER as shown on Drawing No. FD-281 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L CUSHION COVER made out of approved Tapestry Cloth suitable for FOAM CUSHION SEAT or BACK of size 21"x22"x4" duly stiched with Fine Standard Thread and providing best quality Chain with Runner on One Side and fixing to SOFA SET 3 SEATER as shown on Drawing No. FD-281 including taking out old Cushion Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

Taking out of unserviceable leg of TRESTLE STORE ROOM wooden adn S&F Second Class Hard Wood New Leg of size 100x100x405mn made to existing shape including complete all as sepcified in Drawing and as directed. (Drawing No. FD-86(M))

-Ditto- All as per item No 211 above but for replacement of wooden members of size 100x60x600mm to trestle Store Room.

-Ditto- All as per item No 211 above but for replacement of wooden members of size 100x60x2040mm to trestle Store Room.

Providing two coats of cresote Oil to trestle store room complete all as sepcified in Drawing No. FD-86(M) and as directed.

Taking out old userviceable top from TABLE 3'x3'' and supply and fixing new top made out of 19/20mm thick, commercial face particle board bonded with phenol formaldehyde duly pasted with 1.5mm thick plastc laminated sheet teak veneered finish of approved quality with adhesive (Make : Fevicol of Pidilite industries) including Providing 19 x 4mm size 1st class hard wood ( Teak wood) semi oval shape beading all around complete all as specified and directed and shown on drawing No. FD-262/233

Removing/taking out the existing unserviceable broken legs and supply and fixing new leg of existing size made out of well seasoned1st class hard wood including providing of PVC shoe at the bottom of the legs with screw. complete all as specified and as directed and shown on drawing No. FD-262/233

-Ditto- All as per item No 215 above but long rail made out of well seasoned1st class hard wood (Teak wood)

-Ditto- All as per item No 215 above but short rail made out of well seasoned1st class hard wood (Teak wood)

M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table 3'x3'. Complete all as directed.

Taking down old UNSV boad of HAT STAND WITH MIRROR and S&F of new board of size 1000x710mm made out of 18mm thick prelaminated particle board with edges dully covered with 4mm thick second Class Hard wood beading duly finish/polish of all round. Rest all as specified on Drawing No. FD-262/ 233 and as directed.

M&L for removing of old/worn out U/S Mirror and fixing new mirror of size 300mm x460mm 5.5 mm thick (Make : MODI GUARD/ATUL/Swastik) as per size shown on Drawing No. FD-262/ 233 and as directed.

M&L for removing of old/worn out U/S alluminium peg set and fixing new alluminium Peg Set as per size shown on Drawing No. FD-262/ 233 and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to Hat stand with mirror complete all as directed by Engr–in- Charge.

M/S K.K.TRADERS

M/s Singh Furniture Mart

Vinayak Distributors

shekhar & company