Beautification of MEMCO More Chowk (Manindranath Mandal Chowk) Under DMC, Dhanbad

For 20 mtr. High mast: ITC of the high mast and light fixture with the help of suitable tools and plans, wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of suitable copper conductor lugs, MCB and all labour & construction of shallow foundation with M25 grade concrete for the high mast considering safe soil bearing capacity of 10T / mtrs sq. for 20 M High mast.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

metre

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately By Manual means Bituminous courses

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Cornices and mouldings

Providing and fixing stone jali 40 mm thick throughout in cement mortar 1 :3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1 : 2 (1 white cement: 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone

Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1 : 6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1 : 2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 1 2 mm thick cement mortar 1 : 3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1 : 2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins ) Red sand stone - exposed face fine dressed with rough backing 30 mm thick

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1 : 4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1 : 4 (1 cement: 4 coarse sand) and finished neat complete.

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supply at site of work well decayed farm yard manure, from any available source, approved by the engineer in charge including screening and stacking.

Spreading of sludge farm yard manure or/and good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid for separately).

Spreading of sludge farm yard manure or/and good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid for separately).

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1 : 5 (1 cement: 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1 : 2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone

Maintenance of Lawns with Fine Grassing for the First Year Maintenance of lawns with fine grassing for the first year including watering etc

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1 : 5 (1 cement: 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1 : 2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone

Maintenance of Lawns with Fine Grassing for the First Year Maintenance of lawns with fine grassing for the first year including watering etc

Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting In position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.

Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metres

Cable Duct Across the Road (Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 - 1997 and approved drawings.) Single row for one utility service

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 : 4 (1 cement: 4 coarse sand). Light shade pigment using white cement

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concree, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with allk lifts and lead of 1000 metres Dismantling Brick/ tile work In cement mortar

Providing edge moulding to 1 8 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.)

Providing and fixing hand rail of approved size by welding etc

. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube

Grassing with ' Doobs' Grass Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 7.5 cm apart in either direction

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work (Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control ) Over 10 cm in width

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work (Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control ) Up to 10 cm in width

Supply, fabrication, and fixing of Mild Steel bollards made from 100 mm diameter, 4 mm thick MS pipe, total height 1000 mm, top end plain, finished with polymer paint in approved color, and provided with two reflective tape bands, 50 mm wide each. Bollards to be fixed by drilling holes in reinforced or plain cement concrete using a power-driven drill machine to a depth of 100 mm, with 10 mm dia × 100 mm steel bolts and washers grouted using approved epoxy resin anchor, ensuring proper alignment. Complete in all respects as per drawing and directions of the Engineer-in-Charge.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 80 cm x 60 cm rectangular (exit direction)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 90 cm equilateral triangle (for caution)

Providing and fixing 1 8 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 : 4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Supplying and fixing Mild Steel Bollards, fabricated from 168 mm diameter, 4 mm thick M.S. pipe, having a total height of 1000 mm with 600 mm above ground and 400 mm embedded below ground, the embedded portion to be grouted in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate, 20 mm nominal size) in a pit of size 300 mm × 300 mm × 450 mm deep, including excavation in bituminous/concrete pavement as required, ensuring proper alignment, grinding smooth, and finishing the exposed portion with alternate bands of black and yellow synthetic enamel paint with reflective additive, applied over one coat of red-oxide zinc-chromate primer, complete as per drawing and as directed by the Engineer-in-Charge.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 90 cm circular (for speed limit)

Providing, fabricating, finishing, supplying, and fixing of a 10 ft high man statue in brass (approx. 450 kg) as per the approved design, drawings, and reference image. The statue shall be cast in high-quality brass alloy using the lost-wax (investment) casting or centrifugal casting process to ensure f

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 90 cm x 75 cm rectangular (advance direction)

Earthing with copper earth plate 600mmx600mmx3m thick including accessories ,and providin, masonry enclose with copper plate having locking arrangemen and watering pipe etc. Iwith charcole or coke and salt as required.

ine detailing and uniform density. The surface shall be finished and patinated as per the approved sample, cleaned, degreased, and sealed with a clear protective coating suitable for exterior use. The statue shall be provided with an internal stainless-steel anchoring system and mounting base, securely fixed on a base with appropriate anchor bolts and non-shrink grouting. The work shall include all materials, tools, labor, transportation, safe handling, lifting, placement, and final alignment, complete in all respects as directed by the Engineer-in-Charge.

S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 60 cm x 60 cm square (Round about Name)

Providing and fixing FRP-based architectural superstructure of approximately 9.0 m height and 3.0 m × 3.0 m plan size, to be installed above the existing 6.0 m (20 ft) RCC civil base, complete in all respects as per approved drawings and specifications. The work includes design, detailing, fabrication, and installation of a heavy-duty MS structural framework made of IS-standard hollow sections with red oxide primer and polyurethane top coat, designed to withstand wind load up to 180 km/h. The framework shall support custom-moulded FRP panels (3–5 mm thick) fabricated using isophthalic grade resin, reinforced with E-glass fiber, and finished with UV-resistant PU paint in approved RAL shade. The FRP assembly shall include domes, cornices, arches, clock housings, and ornamental mouldings, fabricated as per design intent, with internal MS ribs and base plate anchor systems for proper integration with the civil base. Installation shall be carried out using suitable crane and skilled workforce, ensuring alignment, joint sealing, and seamless monolithic finish. The rate shall include all materials, labour, fabrication, transportation, lifting, scaffolding, fixing accessories, surface finishing, and final touch-up works complete as directed by the Engineer-in-Charge.

S.I.T.C of following rating approved make LED Bollard fitting with cylindrical shape and inverted cone shape head of height 600 to 850mm power input-8/9watt with die cast aluminium housing opel with PC diffuser, IP:65/54 protection, conferming to IS:10322 part 5 etc all complete as required. (excluding plinth charge)

S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 1C[.Z70Y AC,50Hz. Luminarie shall be confirm tolS:,1,0322part-5/section-5 and shall be complete with all neccssary accessories as required50/60 WATT LED Flood Light

Design, fabrication, supply and delivery of 9.0 mtr high decorative Wing Pole made of MS pipe with 3.0 mm wall thickness, comprising 150 mm Ø base pole, 75 mm Ø wing poles on both sides, 50x50 mm MS box section bracket for street lamp mounting, and 600x1200 mm advertisement frame in MS box section, with provision for fixing of luminaire (street light not included in this item), decorative laser cut stainless steel elements as per approved architectural design, complete with base plate, welding, grinding, surface preparation, one coat primer and two coats of epoxy paint of approved shade, including all materials, labour, tools, transport and incidental works as per approved design and drawing.

).5m Double Arm suitbale for 90mm Top(Basic Rate : Rs. 1380.00 + Overhead & profit @ 14.95% = Rs. 1586.31 )

Installation, Testing & Commissioning of the 9 Mtr. Octagonal Pole & light fitting with the help of suitable tools and plants, wiring of luminaires with all materials and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity of 10T/mtrs sq. (Basic Rate : Rs. 8100.00 + Overhead & profit @ 14.95% = Rs. 6207.30 )

S/F 6 amps to 32 amps rating 240 volts, ‘C’ series miniature circuit breaker suritable for lighting and other loads of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as reqd.6/32 amps,Single pole

SITC of following rating LED street lighting luminari with pressure die cast housing and toughtend glass cover ,IP 66 protection,lumonous EFFICARY>=110 LM/W with lens in existing pole/pipe for supply voltage 100-270 V AC,50 Hz.Luminarie shall be confirm to IS:10322 part 5/section 3 and shall be complete with all necessery accessories as reqquired.120W LED street light

Supplying and drawing following size of FR PVC insulated copper conductor single core cable in existing surface/recessed steel/PVC conduit including dismantling as required 3x1.5 sqmm

Supply of XLPE insulated sheathed (heavy duty) armoured electric cables with Aluminium conductor for working voltage 1100 volts conforming to IS:7098 (part-1)/IS:1554; 4 core x16 sq mm (Basic Rate: Rs. 221.00 + Overhead & Profit @ 14.95% = Rs. 254.03)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required; 4 X 16 sq. mm (28mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, cushioning, protective coveringand and refilling the trench etc. as required

Supplying and laying of 40mm dia medium class GI pipes for road crossing (Basic Rate: Rs. 300.00 + Overhead & Profit @ 14.95% = Rs. 344.85)

Earthing with GI earth pipe 4.5 mtr long,40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.

Supplying and laying 6 SWG GI wire at 0.50 meter below ground level for conductor earth electrode, including soldering etc as reqd.

S.I.T.C of Outdoor stand mounted feeder peelar with 63 amps

Providing, fixing, testing and commissioning of a high-precision electro-mechanical clock mechanism suitable for outdoor installation in FRP/metal tower structure, complete with GPS-based synchronization and LED backlit dial, as per approved design and specification. The clock mechanism shall comprise a waterproof and dustproof electro-mechanical movement, incorporating rust-resistant stainless steel and brass components such as center shaft, worm wheel, canon pinion, hour and minute wheels, arm bushes and bearings, designed for seamless long-term operation in outdoor conditions. The clock dial shall be fabricated from MS metal frame reinforced with opal acrylic sheet, ensuring durability and uniform illumination, with custom-designed numerals and markings for maximum visibility. The dial and housing shall be finished with UV-protected weather-resistant coating to prevent fading and deterioration. The clock hands shall be made of lightweight, corrosion-resistant aluminum, precisely balanced for accuracy and finished in matte black for clear contrast against the illuminated background. Integrated energy-efficient LED lighting shall provide uniform backlighting for the dial, ensuring excellent visibility during night hours and enhancing architectural aesthetics. The clock shall be operated through a GPS-synchronized controller and driver unit, providing automatic time correction without manual intervention, and equipped with a battery backup capable of maintaining time accuracy for 48–72 hours in case of power failure. The work shall include all accessories such as driver units, control cables, fixing supports, power connections, and necessary hardware, complete in all respects as per manufacturer’s recommendation and direction of the Engineer-in-Charge.

Providing and fixing 25mmx5mm cpper earth strip in 0.5Mtr below ground as strip earth electrode,including soldering as required.

Carraige of materials

Cement (upto 10Km)

Sand (upto 10Km)

Aggregate (upto 15Km)

Bricks (Upto 10 Km)

Bitumen (Upto 10 Km)

Add GST @ 18%

Add Labour Cess @ 1%