PGF 2023-24 Koothur Village Panchayat Mannachanallur Tiruchirappalli Construction of Community hall at Thiruvengadam Nagar, Panamangalam in Koothur Panchayat

Amount

Construction of Community hall at Thiruvengadam Nagar, Panamangalam in Koothur Panchayat Earthwork excavation and depositing on bank with an initial lead of 10m and lift

Sand filling for Foundation with clear M Sand cost and conveyance in etc

Cement concrete 1 4 8 one cement four sand and eight aggregates using 40mm HBGS for levelling course for foundation including

Supplying and erecting steel centering for sides and soffits I including necessary supports' and shuttering to the required height Basement & Foundation

Supplying and erecting steel centering for sides and soffits I including necessary supports' and shuttering to the required height above basement

RCC 1:1.5:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., Complete

Supplying fabricating and placing in position of HSD steel rods for Reinforcement including the cost of steel and binding wire etc

Brick work CM 1:5 mix using country bricks including cost and conveyance labour charges etc., Complete

Plastering CM 1:5, 12mm thick including cost and conveyance charges etc.,Complete complying with standard specification.

Special ceiling plastering with C.M 1:3, 10mm thick inlcuding cost and conveyance charges etc.,

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Daddoing of walls with colour glazed tiles of size 300x200x6mm of best quality invluding cost and conveyance of all materials to site and all labour charges etc., complete

Brick jelly lime concrete by using 20mm brick jelly with lime in the ratio of 32:12.5 including cost conveyance of all materials and labour charge for mixing laying compacting well beaten with wooden batens etc., Complete

Finishing the top of roof with one course of pressed tiles of size 20 cm x 20 cm x 2 cm laid in cement mortar 1:3 and pointing with the same mortar mixed with water proof compound including cost and conveyance off all materials and labour charge etc.,

Plastering Cm 1:4, 20mm thick including cost and conveyance of all materials and labour charges etc., Complete

Granilithick floor finish in CC 1:2:4 mix using 10-12mm ISS sine HBG metal including cost and conveyance off all materials and all labour charges etc., for 25mm thick

Door 1.80x 2.10

Door 0.90x 2.10

Door 0.75x 2.10

Door 1.20x 2.10

Window 1.50 x 1.30

Window 0.90 x 1.30

Ventilator 0.90 x 0.45

Labour Charges door

Labour ChargesWindow

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc., Complete

Painting two coats with exterior emulsion of approved colour over one rimer coat including cost of paint and labour charges etc., Complete

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings etc., Complete

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supply of the following PVC pipes and PVC specials etc., Complete for seewage line and rain water down fall pipe with necessary bend , shoes and clamp and labour charges etc., Complete

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. UPVC 32mm Dia

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. UPVC 20mm Dia

Supplying and fixing of PVC Water tank etc., Complete complying with standard specification.

Filling 40mm ISS HBG metal etc.,complete

Filling 20mm ISS HBG metal etc.

Supply and fixing of cuddapah slab of 25mm / 40mm thick including cost and conveyance of all materials and labour charges etc., Complete

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Wiring with 2x1.5 sqm (22/0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW box 150mm x 100mm x 113mm for 5 A 3 pin non inter locking cs plug with painting of suitable colour with contionues earth wire connection of 14 SWG TV wire for OPEN PVC PLUG Point

Wiring with 2 x 1.5 Sqm (22/3) PVC insuated unsheathed single core copper conductor of 1100V grade in suiatble PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5AF.T switch with painting of suitable colour for OPEN PVC Light point and fan oint ( for electronic regulator) SD 18

Tube light Fittings

Supply and fixing of 32 A DPIC Switch of 500 v with F & N ( Side handle ) on suitable TW box wth PWD earthing ( SD No 141)

Supply and run of 2 of 6Sqmm (84/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade on 7/20G Bearer wire for Service connection mains (SD 65 )

Support and run of 2 of 6 Sqmm ( 84/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in 25mm dia GI suitable pipe B class suiatbly bended both ends with necessary angle iron upright and end support for Mains ( SD 70 )

Supply and fixing of water TIGHT Bulk head fitting with guard for incandescent lamp with 11 w bulb SD 83.

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300w regulator with 1 meter down rod on the exiting clamp SD 110

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

ALPHAA MINDS VENTURES