Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.5 LAccepted-AOC | L1 | Accepted-AOC Accepting being L1 | |
| 2 | L2₹43.9 L+₹2.0 L (4.88%)Rejected-Finance H NO 107 A RAJENDRA NAGAR DIGARI KALAN JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹44.8 L+₹2.9 L (6.98%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹44.8 L+₹3.0 L (7.08%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹45.3 L+₹3.4 L (8.22%)Rejected-Finance 00 BAJRANG CHOK MAHOBA MAHOBA UTTAR PRADESH 210427 | MAHOBA | UTTAR PRADESH | 210427 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY NO. 1 JODHPUR
GE ARMY NO. 1 MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR OF SINGLE OFFRS ACCN BLDG NO P-435 AND PROVN OF 8 NOS ROLLING SHUTTER IN BLDG NO T-875 AND P-915 AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE (ARMY) NO 1 JODHPUR
2023_MES_618381_1
GE/JODH (A) NO 1- OF 2023-24 (9182/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ARMY NO. 1
₹98,000
Yes
17 Nov 2023
12 Sept 2023
18 Oct 2023
12 Sept 2023
11 Oct 2023
27 Sept 2023
Amount
S&F in replacement rotational moulded polythene water storage tanks of 1000 ltrs capacity, white, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with including dismantling old tanks complete all as specified and as directed.
S & F in repairs ball valves 20mm dia bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms, complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
All as per item No 3.00 here-in-above, but size of pipe 20 mm bore.
All as per item No 3.00 here-in-above, but size of pipe 25 mm bore.
S&F GI water tubing medium grade, 15 mm bore size, galvanized, with all fittings fixed to wall, ceilings or laid in floors, including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
All as per item No 6.00 here-in-above, but size of pipe 20 mm bore.
All as per item No 6.00 here-in-above, but size of pipe 25 mm bore.
Demolition of cement concrete as removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.
M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
Taking down cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.
M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.
M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 2.00mm having weight not less than 3.00 Kg/Sqm, mineral gravel finish on top, using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.
M&L 15 mm thick rendering in cement mortar 1:4,on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, mixed with water proofing compound as per manufacturer instructions and finished the surfaces fair and even with out using extra cement, complete all as specified and as directed. Note :- WPC will be measured and paid seperately.
M&L for 10 mm thick Rendering in CM 1:4 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.
Complete removal of existing treatment from walls as per directed.
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
M&L for applying 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper paint on wall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Paint shall be in one or more colours/ shades all as approved by GE.
M&L for applying two coats of exterior emulsion paint on wall surfaces as per manufacturer’s instruction over and including M&L alkali resistant primer, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Paint shall be in one or more colours/ shades all as approved by GE.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
Dismantling, stone slab, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.
M&L for 15 to 18 mm thick Udaipur green stone in single piece as required, as in flooring., machine cut, (table rubbed and granite polished) best quality as per sample, over & including 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, complete all as specified and as directed.
M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in cooking plateform, oval type WHB counter, sink & etc. machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.
M&L for double charged / dark shade vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc., complete all as specified and directed.
M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.
M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed.
M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed.
S&F in replacement bib cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
S&F in replacement angular stop cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
S&F in replacement Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) , 15mm dia complete all as specified and as directed.
S&F in replacement two way angle cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
S&F in repairs Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.
S & F in repairs vitreous china ware wash hand basin, white, flat back of size 630 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.
S&F in replacement Rimless Single Piece EWC Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed.
S & F in repair for Corner Glass shelf 250mm, complete all as specified and as directed.
S&F in replacement stainless steel single Towel rail 600mm long, complete all as specified & direceted
S&F 75mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed
S&F 110mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed
S&F in replacement 75mm bore PVC (SWR) bends (any radius) with oval acess door, diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed
S&F in replacement 110mm bore PVC (SWR) bends (any radius) with oval acess door, diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
Taking down steel windows and ventilators ( glazed / fly proof) of any description complete all as specified and as directed.
M&L factory Made flush shutters, 30 mm thick solid core with block board core construction as per IS 2202(part-I, 1999), both side commercial type. The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 30mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing, complete all as specified and directed.
M& L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.
M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.
S&F 150mm long aluminium anodised barrel tower bolt, complete all as specified and as directed.
S&F of aluminium alloy anodised sliding door bolt with hasp and staple bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.
S&F of Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters.
S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed.
M&L for fabrication of Pre powder coated (powder coating min 50 micron) Anodised aluminium frame work suitable for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as directed Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately,
M&L for Pre- powder coated (powder coating min 50 micron) aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators,complete all as specified and as directed.
M&L for Pre powder coated (powder coating min 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) ,complete all as specified and as directed.
S&F Sheet glass 4.80mm thick, ordinary quality and glazing with oil putty/aluminium with rubber beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.
M&L Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over & including M&L single coat of pink primer complete all as specified and as directed .
M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base as in floor complete all as specified and as directed .
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
Taking out from position framed woodwork as in cupboards/cabinets area exc 0.50 sqm but not exc 1.50 sqm & depth not exc 60 cm etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & credit to contractor or remove to store, complete all as directed at site for complete.
M&L for PVC sheet frame of width 100-150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.
M&L for 18 mm thick solid PVC sheet printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .
S&F '0' degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample.
S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters
S&F Drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge
S&F Prepainted Galvalume aluminium zinc coating GI based corrugated steel Sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of old broken plain or corrugated AC sheets as in roof coverings complete all as specified and as directed.
Mild steel work as in tubular trusses, rafters, purlins, posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, medium grade of any dia complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil, complete all as specified and as directed .
Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil ,complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
M&L PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in bed to100 mm bore salt glazed stone ware drain pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed.
S&F 150 mm bore Salt glazed stone ware drain pipe laid in trenches and cement joint in cement mortar 1:1 complete all as specified and as directed .
Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.
M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.
Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.
M&L for 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc., not exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4. ,complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exceeding 10 cm not exceeding 20 cm girth complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C-1 by using 20 mm graded stone aggregate as in bed block for fixing of hold fast complete all as specified and as directed.
M&L Rolled mild steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed.
S&F 1mm thick lath Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and as directed.
S&F ball bearing for rolling shutters, complete all as specified and as directed.
S&F safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and as directed.
Cutting into old stone masonry for inserting hold fast and fixing with PCC 1:2:4 complete all as directed
M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.
M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying two coats of exterior emulsion paint on wall, complete all as specified and directed.
M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation , filling, sub base and mass concerete complete all as specified and as directed.
M&L RCC (nominal mix) 1:1½:3 type A1 by using 20mm graded stone aggregate as in column footing and the like complete all as specified and directed.
M&L RCC (nominal mix) 1:1½:3 type A1 by using 20mm graded stone aggregate as in column hexogonal / octagonal shape, and the like complete all as specified and directed.
Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.
All as per item No. 97.00 here-in-above, but as in sides of columns (hexahonal/octagonal in shape) with rough finished surfaces
M&L TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
M&L TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
M&L for face work masonry with 100-125 m thick white / chitter sand stone having rock face bushings not less than 15-20 mm incl chisel drafted margin 20-25 mm wide all as per local Jodhpur Pattern (KADAOU) regular coursed well bonded bedded & solidly hearted built in CM 1:4 complete all as specified . Height of Kadaou stone course shall not be less than 200mm all as directed at site, complete all as specified and as directed.
M&L for keyed pointing to kadaou facework of Jodhpur sandstone in CM 1:3 using white cement & pigment to match the shade of the stone, complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
M&L for Cast iron designer pieces like spikes, spiral patterns & moulding pieces etc with intricate designs to the steel gate frame work, complete all as specified & directed .
M&L for 10 mm thick cement rendering in CM 1:3 over concrete surfaces & finishing the surface even & smooth w/o using extra cement , complete all as specified & directed .
Surface excavation n. exc. (not exceeding 30 cm deep and avg 15 cm deep) and getting out in sof/loose soil complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets,fittings etc., removing materials to store for keeping in safe custody or for taking credit and including cutting, chasing, pinning & making good disturbed surfaces of walls,floors, etc, complete all as specified and directed by Engineer-in-charge.
Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed by Engineer-in-charge.
Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
M&L modular Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with galvanised steel sunken/concealed modular box (with earth dolly), with curvy modular cover plate for fixing of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .
All as per Serial Item No.110.00 above but for one 3 pin socket outlet 5/6 Amps on the same board with other switches.
All as per Serial Item No.110.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board with other switches.
All as per serial Item No.110 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm cable
All as per serial Item No.110 above but for AC point on independent board with 4.00 Sqmm cable
S&F Modular Switch 1 way, 6 Amps, 1 module, 230 Volts complete all as specified and as directed.
S&F Modular Switch 1 way, 16 Amps, 1 module, 230 Volts complete all as specified and as directed.
S&F Modular Socket, 6 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.
S&F Modular Socket, 6 /16 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.
S&F Modular Bell push, 6 Amps, 230 Volts complete all as specified and as directed.
S&F Modular fan step regulator, 120 W - 2 module complete all as specified and as directed.
S&F Modular BLANK cover plate with frame, 1 module complete all as specified and as directed.
S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fitting, INCLUDING 9W LED Lamp complete all as specified and as directed.
S&F modular Ceiling rose, surface bakelite, 3 terminal, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and as directed.
S&F modular bell, ding dong / multi music type, AC, 230 volts, single pole complete all as specified and as directed.
Supply and fixing decorative post top lantern lights fitting 20 W, 220V, AC, holder, 360 DEGREE, IP 65 protection, including LED LAMP connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F in replacement bldg security LED Light Luminaire of 35 Watts having IP 65/66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 160-260 Volts with in built surge protectore, toughened glass with and including GI pipe 20/25mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed.
M&L single pole and neutral enclosure with two pin earth industrial plug and socket with one MCB SP 20 Amps complete all as specified and as directed.
S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V, IP-43 Protection, duly fixed in concealed in wall including cutting chasing pinning, and making good, suitable for for fixing MCB's complete all as specified and as directed.
All as per item No. 129.00 here-in-above, but DB TPN 4 way, 415 volt
M&L MCB TPN ‘C’ Curve 10KA, 63 amps, 415 Volts, with over load and short circuit protection, complete all as specified and directed .
M&L MCB SPN ‘B’ Curve 10KA, 63 amps, 240 Volts, with over load and short circuit protection, complete all as specified and directed .
M&L MCB SP ‘B’ Curve 10KA, 6 TO 32 amps, 240 Volts, with over load and short circuit protection, complete all as specified and directed .
M&L submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSH PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including 25mm dia PVC rigid conduit with wall thickness not less than 1.8 mm, accessories concealed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.
All as per item No. 134.00 here-in-above, but 4.00 sqmm cable
Dismantling and taking down carefully the existing unserviceable geysers of 25 Ltrs storage capacity, any make, any model fixed in any position by disconnecting from electric connection and water inlet, out let connection and vent pipes etc from site (inside or outside bldgs) and transporting geysers from any location in Army Area to MES store yard / workshop, for carrying out repair work such as De-scaling/ over hauling / brazing welding etc and painting with one coat white colour synthetic enamel paint and re-fixing in same position including making good disturbed surface after complete repair work and reconnection of inlet, outlet pipe and vent pipe including testing complete to the satisfaction of Engineer-in-charge. Note: -(i)Replacement of parts shell be measured and paid separately as supply only. (ii) Quoted rate is deemed to be inclusive of replacement of 4 Nos foundation bolts,nuts,washers of suitable size.(iii) Quoted rate is deemed to be inclusive of transportation of geysers (incld. take back) from any location in Army Area to MES store yard / workshop, for carrying out repair work such as De-scaling/ over hauling / brazing / welding / painting and etc.
Taking down ceiling fan / Wall mounting fan of any size and 1200 mm sweep from its position and dismantling for servicing including cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing removal of bearing, bushes, condenser, connector, flaxible cord,split pin etc if required, removing old grease and refill fresh, lubricating bushes alongwith new washers, cleaning and washing fan blades & fan body with soap solution after repairing and re- assamble the same including provision of twisted twin core flexible wire upto 0.7m long of size 28/0.0076 (ISI marked) and connecting to electric system, testing etc and hanging to position / to any location in MIL Stn incld. making good disturbed surfaces to matches with existing surfaces complete all as specified and as directed .Note: (i) Quoted rate is deemed to be inclusive of taking down unserviceable/ defective parts and fixing with new parts.(ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store yard / workshop.
All as per item No. 137.00 here-in-above, but exhaust fan any sweep
Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
M&L MCB SPN ‘B’ Curve 10KA,32 amps, 240 Volts, with over load and short circuit protection, complete all as specified and directed .
S&F factory made distribution board in sheet metal enclosure in SINGLE door with 200A rated bus bar, SPN 2 way, 240V, IP-43 Protection, duly fixed in concealed in wall including cutting chasing pinning, and making good, suitable for for fixing MCB's complete all as specified and as directed.
Supply, laying, testing & commissioing of cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core including taking out old unserviceable cable if required., complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismanteling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.
Supply and filling dry clean sand (tibba sand) in trenches for cushioning of underground cable and punning for cushioning to cable complete all as specified and directed . Note :- Punned thicknes only shall be measured for the purpose of payment.
Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 300 mm x 180mm x 40mm complete laid over the cable perpendicular to the cable for protection, complete all as specified and as directed.
Supply and fix in replacement of GI tubing of size 40mm bore, medium grade for protection of cables on poles / under road crossing complete all as specified and as directed.
M&L Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L machine cut kota stone slab flooring using 20 to 25mm thick slabs,as in shevles (single piece), the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including rounding to edges of kota stone fixed with mortar complete all as specified and as directed.
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.
Racking out joints/ pointing to random rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed
M&L keyed pointing in cement mortar (1:3) to squared rubble masonry coursed or un coursed complete all as specified & directed by Engineer-in-charge.
M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement as primer, complete all as specified & directed
S&F Factory made steel ventilators with top hung shutters with or without glazing bar, including box type hinges, steel peg stay complete all as specified and as directed. Note:- Glass panes and wire cloth shall be measured and paid seperately.
S & F 150 mm double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/aluminium with rubber beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
S&F 4.00/5.50 mm thick figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.
Supplying and laying of CPVC pipes, 16 mm ouetr dia of pipe, SDR 11 & Plain CPVC SDR 11 including all brass fittings, laid in trenches or ceiling or fixed to wall complete all as specified.
Supplying and laying of CPVC pipes, 20 mm ouetr dia of pipe, SDR 11 & Plain CPVC SDR 11 including all brass fittings, laid in trenches or ceiling or fixed to wall complete all as specified.
S&F in replacement stop cock with wall flange, chromium plated brass, fancy type 20/25mm dia complete all as specified and as directed.
S & Fin repairs 75mm bore cast iron nahani trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.
Dismantling of cast iron/PVC SWR pipes of 75mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.
S&F 75mm bore PVC (SWR) single socketed in any length with rubber ring joints FIXED TO WALL complete all as specified and directed
S&F of PVC (SWR) 75 mm bore bends any radius complete all as specified and as directed.
S&F 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, 32mm bore PVC flexible waste pipe (1.20 mtr LENGTH), grating and union for discharge pipe, CP screws etc complete all as specified and as directed.
S& F PVC connection of 15mm bore and 600mm long with PTMT nuts complete all as specified and as directed.
S & F in repairs stainless steel kitchen sink without drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors & fixing of glass dividing strips & finishing the surface even & smooth with using extra cement complete all as specified & directed
S&F in replacement rotational moulded polythene water storage tanks of 500 ltrs capacity, white, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with including dismantling old tanks complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified & directed by Engineer-in-Charge
M&L precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in solid block masonry, 10cm width and setting in cement mortar 1:4 including demolition complete all as specified and as directed .
S&F brass chrome plated soap dish with holder fancy type complete all as specified and as directed.
S & F in repairs stainless steel plate rack of size 780mm X 600mm X 250mm of approved pattern made out of stainless steel sheet 0.50 MM thick, 15 stacking plates with hooks / fittings, round 8mm dia rods, all as sample kept in GE, complete all as specified and directed.
M&L Pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.
M&L factory Made flush shutters, 35 mm thick solid core with block board core construction as per IS 2202(part-I, 1999), both side commercial type. The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 30mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 44 to 46 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
M/S SHARMA ASSOCIATES
SN TECHNO CONSTRUCTIONS
JB INFRA
HINDUSTAN TRADING COMPANY
M/S SUMAN ENTERPRISES
Harsh Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .