Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹33.1 L
Closing Date
27 Jul 2026, 4:00 pmClosed
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
Part-A- Establishment of 2x20 MVA, 66/11kV Substation at Gowibidanur Industrial Area Phase-3, Chikkaballapura District. Part-B- (i) Construction of 66kV SC line on DC towers from Kudumalkunte 66/11kV Substation to common tower for distance of 0.958 kms (ii) Construction of 66kV SC line on DC Towers from Vidhurashwatha 66/11kV Substation to common tower for distance of 3.355 kms. (iii) Construction of 66kV DC Line on DC Towers from Common Point to proposed 66/11kV Gowribidnur Industrial Area 3rd Phase Substation for a distance of 1.971 kms. Part-C- (i) Providing 1 No of additional line TB at existing 66/11kV Substation Kudumalakunte Industrial Area in Chikkaballapura District. (ii) Providing 1 No of additional TB at existing 66/11kV Substation Vidurashwatha in Chikkaballapura District (3rd Call)
KIADB/2025-26/SS/WORK_INDENT427/CALL-3
KIADB/2025-26/SS/WORK_INDENT427/CALL-3
Open
Sub-Station
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
8 documents required · 8 mandatory
To qualify for award of this contract, each Tenderer in his name should have in the last five years period 2021-22 to 2025-26. The Tenderer should have satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar nature such as Construction and Completion of One Substation of minimum 66kV class along with 66kV Transmission line work of value not less than Rs.16.57 Crores (exclusive of GST) within last five financial years
Executed in any one financial year, the following minimum quantities of work (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/ Public Sectors/ Government Undertaking Organizations (1) 66kV class 20 MVA Power transformer: 2 Nos, (2) 66kV class circuit breakers: 3 Nos, (3) 66kV class current transformer: 10 Nos, (4) 66kV class Voltage transformers: 2 Nos, (5) 66kV class control & relay panel: 3 Nos, (6) 11kV MCVCB switch gear panel: 1 No, (7) Construction of control Room for 66kV capacity substation: 1 No, (8) 66kV or above category overhead transmission line (Route length): 6.60 Km
Each Tenderer should further demonstrate: Availability of the required / specified critical equipment for this work can be deployed on Own / lease / hire basis the following key and critical equipment for this work
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), Where, A: Maximum value of Substation/Electrical engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 15 months
To qualify for award of this contract, each Tenderer in his name should have in the last five years period 2021-22 to 2025-26. Achieved in at least two financial years a minimum financial turnover of Rs.53.02 Crores. (From Electrical Contract Works Only.
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities for the work of Part-A: Establishment of 2x20 MVA, 66/11kV Substation at Gowibidanur Industrial Area Phase-3, Chikkaballapura District. Part-B: (i) Construction of 66kV SC line on DC towers from Kudumalkunte 66/11kV Substation to common tower for distance of 0.958 kms (ii) Construction of 66kV SC line on DC Towers from Vidhurashwatha 66/11kV Substation to common tower for distance of 3.355 kms. (iii) Construction of 66kV DC Line on DC Towers from Common Point to proposed 66/11kV Gowribidnur Industrial Area 3rd Phase Substation for a distance of 1.971 kms. Part-C: (i) Providing 1 No of additional line TB at existing 66/11kV Substation Kudumalakunte Industrial Area in Chikkaballapura District. (ii) Providing 1 No of additional TB at existing 66/11kV Substation Vidurashwatha in Chikkaballapura District in favour of CEO & EM, KIADB, Bengaluru not less than Rs.9.94 Crores (Credit lines/ letter of credit/ certificates from banks for permitting the fund requirement etc - equivalent of the estimated cash flow for the months in the peak construction period)
₹7,500
₹33.1 L
27 Jul 2026
20 Jul 2026
28 Jul 2026
13 Jul 2026
13 Jul 2026
Establishment of 2x20 MVA, 66/11kV Substation at Gowibidanur Industrial Area Phase-3, Chikkaballapura District.
STATION SUPPLY PORTION:
Power Transformer:
a) 66/11kV, 3-ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical ...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complet...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complet...
11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank with all lead and lifts complete as per specifications and direc...
11KV isolators, Single Break 400A, 25KA capacity with Roaster switch rigid bi-metallic terminal connectors suitable for coyote ACSR for Outgoing feeders with all lead and lifts complete as per specif...
CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor with all lead a...
66 kV class, 40 KA, CT of ratio 200-100/ 1-1-1A for Transformers
Core - 1 : Vk-800 V at 200A, Rct 2 ohm at 200/1A, Accuracy class PS-Dist/Dif
Core- 2 : 10 VA, Accuracy class 0.2s- Metering
11kV Class, 25kA, NCT of ratio 2000-1600/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of Copper flats as ...
VOLTAGE TRANSFORMER : 66kV, Single phase, oil filled outdoor type including Marshalling KIOSk with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technical specification...
SURGE ARRESTOR : (Porcelain housing) Metal oxide, Gapless type with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 60 kV, 10 KA Metal Oxide with su...
SURGE ARRESTOR : (Porcelain housing) Metal oxide, Gapless type with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 9 kV, 10KA class with connector ...
Control and Relay Panel complete :
Simplex type control and relay panels complete as per specifications.
Note: Proposed differential relay at 66/11 kV Kudumalakunte sub-station, Vidhurashwatha sub-st...
Control and Relay Panel complete :
Simplex type control and relay panels complete as per specifications.
Note: Proposed differential relay at 66/11 kV Kudumalakunte sub-station, Vidhurashwatha sub-st...
Station Structures : (Including bolts & nuts)
Note: 1) Weight of station structures and GI mounting structures shall be as mentioned in prevailing SR.
A) 66kV Side station structure fabricated out o...
Station Structures : (Including bolts & nuts)
Note: 1) Weight of station structures and GI mounting structures shall be as mentioned in prevailing SR.
A) 66kV Side station structure fabricated out o...
Lightning Mast Structure (approx wt. 2.812 t) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Note: LM Quantity shown here is indicative only. ...
11 kV ODS and take of structure:
Supplying & erection of Double pole structure with all accessories using 9.5 Mts long, suitable for mounting roaster GOS with all lead and lifts complete as per speci...
Supplying & erection of Double pole structure with 9.5mtr RCC Poles, 11kV 400A Double Break isolators, 9kV, 10kA Surge Arrestor (3No), H-frame along with DOLO/HG fuse unit, LT Protection kir, LTD bos...
MOUNTING STRUCTURES : including Bolts & Nuts (Lattice Type) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.:
Note: Weight of 110 kV equipment m...
66 kV Isolators Live point height 6350mm. (0.982t)
Current transformers 66 kV (0.158 MT)
11kV NCT (0.157 MT)
Voltage transformer 66 kV (0.148 t per structure)
Lightening arrestors 66 kV (0.116 t per structure)
Pedestal insulators with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
a. Pedestal insulators for Bus (0.141 t per structure)
b. High pedestal insulators for transformer (0.150 t per structure)
11KV Cable Terminating Structure for LV Side of Transformer (0.072 t Per Structure)
BUS BAR FORMATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Moose ACSR-66kV side
Rigid bus with taps & clamps with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 66 kV side:
i) Aluminium tube conforming to 6340WP of IS - 5082 / ...
b) 63mm size connecting isolator to vertical tap
ii) A) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.
iii) A) Post insulator clamps suitable for 75 mm Aluminium tube & Post insulator solid core type - 66kV side a) Rigid Type
b) Expansion Type
c) Sliding Type
iv) Corona Bell Suitable for Aluminium tube of size 75mm
v) Flexible type terminal connector suitable for 63mm Al Tube to connect isolators
vi) End Cap suitable for 63mm Al tube
Post insulators Cylindrical Solid core Insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
a) 66 kV, 1 Unit/stack
C type Wedge connector suitable for Moose-Panther (Line) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Post Insulator Clamp suitable for Moose ACSR conductor and 66 kV Solid Core Insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Auxiliary Transformer :
Supply and erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer (with 5 taps) w...
LTAC panel ( Indoor): 415 V, as per Technical Specification comprising of Volt meter, Ammeter & 1 No ETV Meter, 1 No I/C MCCB 200A Plus 2 nos 3 phase, 63A OG SFU Plus 2 nos 3 phase 32A OG SFU Plus ...
AC Distribution box (outdoor)
AC Distribution box Single front type with 6 terminals as mentioned in technical specification,1 I/C of 100 A, MCCB 20 KAPlus 6 O/G 16 A MCB Plus 1 O/G of 100 A HRC Fu...
LT Power armoured UG cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.:
1.1 kV PVC insulated 95 Sq mm Aluminium Cable,
4 Core with glands/...
1.1 kV PVC insulated 25 Sq mm Copper Cable,
4 Core with glands/lugs/ferrules with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1.1 kV PVC insulated 10 Sq mm Copper Cable,
4 Core with glands/lugs/ferrules with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
STATION BATTERY & BATTERY CHARGER ::
i) 110 V, 200 AH, Battery set with accessories as per specification with all lead and lifts complete as per specifications and directions of engineer in charge of ...
ii) Battery charger- suitable for 110 V, 200 AH, Battery set with Float cum Booster type battery charger as per specification with all lead and lifts complete as per specifications and directions of e...
DC Distribution panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC Plus 12 nos., 32A SFU for OG etc,....
Copper control cables:
1.1 kV Class PVC Insulated Copper control cables with Lugs/Ferrules/Gland as per technical specifications with all lead and lifts complete as per specifications and directions o...
10C x 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4C x 6 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4C x 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
2C x 6 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
2C x 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
11kV Switchgear:
11kV, 500MVA , 31.5kA, Metal Clad VCB Switchgear (2000A for Incomer and 1250A for feeders), outdoor type, each comprising of 2ICPlus 12FPlus 1BCPlus 4CBPlus 1AP (Remote Announciation...
Capacitor Bank: Design, Engineering, supply, erection (including Civil Works), testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal co...
11KV U.G. Cable with the required cable terminations at both ends. :
One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Trans...
11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV transformers to 11KV Switchgear with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
11KV XLPE cable, 240 Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure with all lead and lifts complete as per specifications and directions of engineer in ch...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 95 Sq.mm 3 Co...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 95 Sq.mm 3 Co...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 1000 Sq.mm Si...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 1000 Sq.mm Si...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 240 Sq.mm ...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 240 Sq.mm ...
Equipments for establishing SCADA Communication :
Note : 1) Satellite Communication required will be arranged by SLDC.
Remote Terminal Unit (RTU) with all lead and lifts complete as per specifica...
Data Concentrator Unit (DCU) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications with all lead and lifts complete as per specifications and directi...
Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications with all lead and lifts complete as per specifications and directions of engineer in charge of...
FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Mechanical Foam type extinguisher
ii) 9 Ltr. capacity with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Water type (Gas pressure type) 9 Ltr. Capacity with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Carbon di-oxide type 4.5 kg Capacity with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
i. G.I Buckets 15 Ltr. Capacity with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
ii. Steel stands for above to have 4 buckets to each stand with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Nitrogen Injection fire extinguishing system (NIFPS) including Civil Engineering works like soak pit etc., as per the recommendaion of the supplier of the fire fighting system for 20 MVA Transformers....
MISCELLANOUS ITEMS like rubber mats, first aid box, danger boards, shock treatment charts, water filter door locks, fixograph, sub-station name board and other sundry items (sizes/capacities to be got...
Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English
Water filter / Water purifier : Wall mounting type (Aqua-guard type).(rate obtained from GEM portal)
Sub-station name board duly painted as per specification including erection & Civil works
Fixograph of size 1.5m x 2.5m with English / Kannada alphabets
Door locks 7 levers (Navtal Make)
Danger board (prohibited) with support structure including fixing in front of the gate
Equipment name plates and earthing name plates including fixing at outdoor yard
Maintenance Tools and Plant with all lead and lifts complete as per specifications and directions of engineer in charge
Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
Telescopic ladder Aluminium 6 Mtr. Height
Ring spanner set
Tube spanner set
Pipe wrench 24 inch
Pipe wrench 18 inch.
Hydraulic crimping tools up to 1000 Sq.mm
Rubber hand gloves (15 kV tested)
Hand Torch: i. Five Cells
Hand Torch: ii.Three Cells
Insulated Cutting Plier: i. 12" Size
Insulated Cutting Plier: ii. 8" Size
Line live tester AC/DC 500 V
Screw driver 18"
Screw driver 12"
Chain pulley block 5 ton capacity
Hydraulic jack 5T capacity
Transil oil Di-electric Breakdown (with 2.5 mm gap 0-60 kV) Test Kit.
Insulation megger 2.5 - 5 kV
Insulation megger 500 V
SF-6 gas leak Detector
Multimeter electromechanical
Multimeter Electronic
DC Voltmeter range -5V to Plus 5V
Hydrometer syring suitable for vent holes
Specific gravity correction chart
Wall Mounting type holder for hydrometer
Thermometer with wall mounting holder
Protective goggle
Acid resisting jars (4 pint capacity)
Rubber shoes knee height
Earthing sticks extendable upto 18 ft
Furniture for Control Room Staff and maintenance staff with all lead and lifts complete as per specifications and directions of engineer in charge.
Steel Almirahs 6 1/2 feet
Steel Almirahs 6 1/2 feet with glass panel doors
Officers tables
Steel Slotted angle rack (big Size)
Steel Slotted angle rack (small Size)
Steel dust bins
Executive revolving chairs
S Type Arm Chairs
Steel folding Chairs
STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder):
Supplying and erection of street lighting lattice type structure along with GI pipe for fixing of LED lamp with al...
Supply and installation/ Fixing/ Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproof,...
PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification with all lead and lifts complete as per specifications and...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
FODP - Fibre Optic Distribution Panel:
FODP 48F : lndoor type consisting of 2Nos of rack mounted LIU each of 48 F (to be housed in FODP) with FCPC coupling and pigtails with all lead and lifts comp...
Fibre Optic Approach Cable:
48 Fibre (DWSM) Fibre Optic Approach Cable - Including accessories and Installation Hardware set for 48 Fibre Optic Approach Cable with all lead and lifts complete as pe...
STATION ERECTION:
Power Transformer:
a) 66/11kV, 3-ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC p...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complet...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complet...
11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank with all lead and lifts complete as per specification...
11KV isolators, Single Break 400A, 25KA capacity with Roaster switch rigid bi-metallic terminal connectors suitable for coyote ACSR for Outgoing feeders with all lead and lifts complete as per specif...
CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor with all lead a...
66 kV class, 40 KA, CT of ratio 200-100/ 1-1-1A for Transformers
Core - 1 : Vk-800 V at 200A, Rct 2 ohm at 200/1A, Accuracy class PS-Dist/Dif
Core- 2 : 10 VA, Accuracy class 0.2s- Metering
11kV Class, 25kA, NCT of ratio 2000-1600/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of Copper flats as ...
VOLTAGE TRANSFORMER : 66kV, Single phase, oil filled outdoor type including Marshalling KIOSk with rigid bimetallic terminal connectors suitable for Moose ACSR conductor with all lead and lifts comple...
SURGE ARRESTOR : (Porcelain housing) Metal oxide, Gapless type with all lead and lifts complete as per specifications and directions of engineer in charge.
60 kV, 10 KA Metal Oxide with surge counte...
9 kV, 10KA class with connector and clamp with all lead and lifts complete as per specifications and directions of engineer in charge.
Control and Relay Panel :
Simplex type control and relay panels with all lead and lifts complete as per specifications and directions of engineer in charge. For Power Transformer 66/11 kV
For 66 kV Transmission line - For Transmission lines with all lead and lifts complete as per specifications and directions of engineer in charge.
Station Structures : (including B & N)
Note: 1) Weight of station structures and GI mounting structures shall be as mentioned in prevailing SR.
A) 66kV Side station structure fabricated out of galv...
Station beams (1B1) suitable for 8, 2m bay width with all lead and lifts complete as per specifications and directions of engineer in charge.
Lightning Mast Structure (approx wt. 2.812 t) with all lead and lifts complete as per specifications and directions of engineer in charge.
Note: LM Quantity shown here is indicative only. The same sha...
11 kV ODS and take of structure :
Supplying & erection of Double pole structure with all accessories using 9.5 Mts long, suitable for mounting roaster GOS with all lead and lifts complete as per spec...
Supplying & erection of Double pole structure with 9.5mtr RCC Poles, 11kV 400A Double Break isolators, 9kV, 10kA Surge Arrestor (3No), H-frame along with DOLO/HG fuse unit, LT Protection kir, LTD bos...
MOUNTING STRUCTURES : including Bolts & Nuts (Lattice Type) with all lead and lifts complete as per specifications and directions of engineer in charge.
66 kV Isolators Live point height 4600mm. (0....
66 kV Isolators Live point height 6350mm. (0.982t)
Current transformers 66 kV (0.158 MT)
11kV NCT (0.157 MT)
Voltage transformer 66 kV (0.148 t per structure)
Lightening arrestors 66 kV (0.116 t per structure)
Pedestal insulators with all lead and lifts complete as per specifications and directions of engineer in charge. Pedestal insulators for Bus (0.141 t per structure)
High pedestal insulators for transformer (0.150 t per structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
11KV Cable Terminating Structure for LV Side of Transformer (0.072 t Per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
Note: Weight of 110 kV ...
Rigid bus with taps & clamps with all lead and lifts complete as per specifications and directions of engineer in charge.
i) Aluminium tube conforming to 6340WP of IS - 5082 / 1969 (BS I...
b) 63mm size connecting isolator to vertical tap
Post insulators Cylindrical Solid core Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
a) 66 kV, 1 Unit/stack
Auxiliary Transformer :
Supply and erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer (with 5 taps...
A) LTAC panel ( Indoor): 415 V, as per Technical Specification comprising of Volt meter, Ammeter & 1 No ETV Meter, 1 No I/C MCCB 200A Plus 2 nos 3 phase, 63A OG SFU Plus 2 nos 3 phase 32A OG SFU Pl...
B) AC Distribution box (outdoor)
AC Distribution box Single front type with 6 terminals as mentioned in technical specification,1 I/C of 100 A, MCCB 20 KAPlus 6 O/G 16 A MCB Plus 1 O/G of 100 A HRC...
LT Power armoured UG cable as per specification:
1.1 kV PVC insulated 95 Sq mm Aluminium Cable,
4 Core with glands/lugs/ferrules with all lead and lifts complete as per specifications and directions ...
1.1 kV PVC insulated 25 Sq mm Copper Cable, 4 Core with glands/lugs/ferrules with all lead and lifts complete as per specifications and directions of engineer in charge.
1.1 kV PVC insulated 10 Sq mm Copper Cable, 4 Core with glands/lugs/ferrules with all lead and lifts complete as per specifications and directions of engineer in charge.
STATION BATTERY & BATTERY CHARGER ::
i) 110 V, 200 AH, Battery set with accessories as per specification with all lead and lifts complete as per specifications and directions of engineer in charge.
ii) Battery charger- suitable for 110 V, 200 AH, Battery set with Float cum Booster type battery charger with all lead and lifts complete as per specifications and directions of engineer in charge.
DC Distribution panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC Plus 12 nos., 32A SFU for OG etc,....
Copper control cables::
1.1 kV Class PVC Insulated Copper control cables with Lugs/Ferrules/Gland with all lead and lifts complete as per specifications and directions of engineer in charge.
10C x 2.5 Sq.mm
11kV Switchgear:
A) 11kV, 500MVA , 31.5kA, Metal Clad VCB Switchgear (2000A for Incomer and 1250A for feeders), outdoor type, each comprising of 2ICPlus 12FPlus 1BCPlus 4CBPlus 1AP (Remote Announciati...
11KV U.G. Cable with the required cable terminations at both ends with all lead and lifts complete as per specifications and directions of engineer in charge. :
One run of 11kV, XLPE 95 sq.mm Al., ...
11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV transformers to 11KV Switchgear with all lead and lifts complete as per specifications and directions of engineer in charge.
11KV XLPE cable, 240 Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure with all lead and lifts complete as per specifications and directions of engineer in c...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge. 95 Sq.mm 3 Core Indoor ty...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge. 95 Sq.mm 3 Core Out door
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge. 1000 Sq.mm Single Core In...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge. 1000 Sq.mm Single Core O...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge. 240 Sq.mm 3 Core Indoor...
Cable Termination Kits suitable for following sizes as per Technial Specification with all lead and lifts complete as per specifications and directions of engineer in charge. 240 Sq.mm 3 Core Out do...
Equipments for establishing SCADA Communication ::
Remote Terminal Unit (RTU) with all lead and lifts complete as per specifications and directions of engineer in charge.
Data Concentrator Unit (DCU) with all lead and lifts complete as per specifications and directions of engineer in charge.
2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set with all lead and lifts complete as per specifications and directions of engineer in charge.
Integration of RTU, DCU and UPS with field equipments with all lead and lifts complete as per specifications and directions of engineer in charge. Note : 1) Satellite Communication required will be...
Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core with all lead and lifts complete as per specifications and directions of engineer in charge.
Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core with all lead and lifts complete as per specifications and directions of engineer in charge.
Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core with all lead and lifts complete as per specifications and directions of engineer in charge.
Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications with all lead and lifts complete as per specifications and directi...
Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications with all lead and lifts complete as per specifications and directions of engineer in charge.
STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder):
Supplying and erection of street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 ...
PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification with all lead and lifts complete as per specifications and...
A) FODP - Fibre Optic Distribution Panel:
a) FODP 48F : lndoor type consisting of 2Nos of rack mounted LIU each of 48 F (to be housed in FODP) with FCPC coupling and pigtails with all lead and lifts...
B) Fibre Optic Approach Cable:
a) 48 Fibre (DWSM) Fibre Optic Approach Cable - Including accessories and Installation Hardware set for 48 Fibre Optic Approach Cable with all lead and lifts complete ...
Earth Mat formation ::
Supplying and laying MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contrac...
Grounding of equipments with 75 x 12 mm GI flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor with all lead and li...
Providing 40mm dia, 1.075mtr. long Earthmat Spike of MS Rod including bending top 50 mm etc with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor) with all...
Construction of embankment by excavating the available approved gravel/murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to s...
Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment,scarified to a depth of 1...
Earth work excavation for FOUNDATION by Mechanical means depthupto 1.50m, as per drawing and technical specifications, includingsetting out, shoring, strutting, barricading, caution lights, including ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works & super structure worksof bridges upto 3.50 m height. The granite/trap/...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc.. The ranite/trap/basalt crushed graded coarse aggr...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The...
First floor ( for roof beams and lintels, Plus 72% extra for form work)- with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The...
First floor ( for roof slabs, Plus 62% extra for form work)- with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The...
First floor -( for columns in super structure, Plus 82% extra for form work)- with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The...
First floor -( for chejja and canopy in super structure, Plus 57% extra for form work)- with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes ...
Providing Thermo-Mechanically Treated bars of grade Fe-550D Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent membe...
Providing Thermo-Mechanically Treated bars of grade Fe-550D Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent membe...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a 2 coat of approved pa...
Providing and constructing load bearing wall with solid concrete blocks of size 400x200x200mm with CM 1:4 a per IS2572:2005 including cost of all materials, labour, scaffolding and curing, usage charg...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work over one coat of primer after thoroughly brooming the surface to remove all dir...
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with all ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying reinforced cement concrete pipe NP-3 for culverts including pointing ends, fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete with all ...
Providing Granite or trap or basalt size stone masonry in Cement Mortar 1:6, stones hammer dressed/chistle dressed as required in courses not less than 20/15cms high with bond stones at 2M apart in e...
Cutting transverse contraction joints in concrete road using concrete cutting machine with diamond studded saw as per standard technical specification and direction of engineer incharge of work includ...
Providing and filling joint sealing compound as per approved drawing and technical specification with coarse sand and 6 percent bitumen by weight, with all lead and lifts complete as per specification...
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (Plus or Minus 0.2 mm), with inbuilt ...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Newly Constructed Roof/Bathroom/Toilet/balcony/utility with Cementatius Waterproof coating - Below 500 m2 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementit...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangula...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia, with all lead and lifts complete as per specifications and directions of engineer in ...
Providing and fixing 100 mm sand cast Iron grating for gully trap with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings rrangement of approved quality and colour, weigh...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality with all lead and lifts complete as per specifications a...
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings with all lead and lifts complete as per specifications and dir...
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore with all lead and lifts complete as per specifications and directions of engineer ...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893 with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying and filling Brick Bats of size 25 to100 mm to soak pit as with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead and lifts complete as per specifications...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm with all lead an...
Providing & fixing 1.5HP mono submersible pump set for rain water sump with electrification including necessary cables and control panels with all lead and lifts complete as per specifications and di...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 andlatest ammendments, electrical resistance welded steel tubes, ma...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications...
Supply and delivery at site Brand new best make PVC insulated submersible cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendme...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. For size 100mm with all lead and lift...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. with all lead and lifts complete as per specifications and...
NON - RETURN VALVE :
Providing and fixing in position 50mm dia nominal bore gun metal non-return valve horizontal type of approved make mark including cost of all materials, lab our and HOM of equipme...
Control panel board for borewell motor pumpset:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of su...
POWER CAPACITOR :
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...
Supply and delivery at site delivery of best indigenous brand new MCB(Miniature Circuit Breakers) of required capacity as per IS 88228/1978
and its latest amendments and with ISI Mark of 6/10/1...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both desti...
Erection elctrification & Commissioning works of pumpsets :
Labour Charges Including aligning and balancing with all necessary erection of materials and labour including supply & erection of two pai...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
suplying, fixing & wiring earth electordes for grouding conduits, I.C cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit.. Th...
ELECTRICAL ACCESSORIES:
Supplying of TPST with reqirable porcelain channels in SM enclosure, made out of 14 SWG powder coated paint of approved colour. 32 AMPS. with all lead and lifts complete as pe...
Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 AMPS with all lead and lifts complete as per specifications and directio...
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
Providing and fixing pre moulded multi diameter cable ceiling system of nitrate rubber along with frame shall be provided at the entry of 220kV and 66kV side power/control cables/instrumentation cable...
Construction of brick masonry inspection chambers of internal dimension 600x600mm and depth 600mm(inner dimension) with modular bricks in CM 1:6, bed concrete 150mm thick with 1;3:6, platering 12mm t...
Construction of brick masonry inspection chambers of internal dimension 450x450mm and depth 600mm(inner dimension) with modular bricks in CM 1:6, bed concrete 150mm thick with 1;3:6, platering 12mm th...
Providing and laying in position of lean concrete of mix ratio 1:3:6 using 20mm and down size jelly, 100mm thick, before spreading of jelly along with supply of necessary materials, labour, weep holes...
Providing and fixing project name board displaying information. The cost is including excavation, transportation and labour, painting, lettering up etc with all lead and lifts complete as per specific...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and laying in position Reinforced cement concrete for Road works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specifications including premixing the materila with water at OMC in mechanical mix plant carriage of mixed mater...
Supplying and fixing M15 grade precast cement concrete Kerbstones for Roadway, Sidewalls and gutters fixed with CM 1:3fixed and finsihed in line as per direction of Engineer in charge.
(The cost of PC...
Supplyingandfixing/replacementofRound/Conical/Diamondshaped HDPE Doom suitable for 125/160W post top lamp fittings with all lead and lifts complete as per specifications and directions of engineer in ...
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127with latest amendments, including conveying to work site...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nomina...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment with all lead and lifts complete as per specifications and direct...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Classconforming to IS:458-1988 with latest amentmentsusing ordinary portland cement, for sanitary works and conveyingto work site, r...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loadingand unloading at both the destinations with all lead and lift withap...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) with all lead and lifts complete as per specifications and directions of engin...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance Plus or Minus 1mm), with wall thickness 2.0 mm (Plus or Minus 0.2 mm),...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic(FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated...
Providing and laying 100mm thick factory made precast M -40grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Commercial Traffic Axle load repetitions more than10MSA upto 20MSA for ...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smoo...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Classconforming to IS:458-1988 with latest amentmentsusing ordinary portland cement, for sanitary works and conveyingto work site, r...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP SwitchV with all lead and lifts complete as per specifications and dir...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket with all lead and lifts complete as per specificati...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket with all lead and lifts complete as per specifications ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch with all lead and lifts complete as per specification...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm) with all lead and lifts complete as per specifications and ...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm) with all lead and lifts complete as per specifications and ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Stepped Fan Regulator Two Module with all lead and lifts complete as per s...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole with all lead and lifts complete as per specificat...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 sqmm Long Barrel with all lead and lifts complete as per specifications and directions of e...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 150 sqmm Long Barrel with all lead and lifts complete as per specifications and directions of e...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired with a...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C with all lead and lifts complete as per specifications and directions of e...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying of recess mounting LED modular down light 2'x2' 36 W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than ...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2' - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. P...
Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 mtrs long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / ...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Design,Fabrication, prototype testing & supply of 220/220 KV M/C Narrow based Towers (Design code-KPTCL-2M-NB-NEWDHP) as per the technical specification. 220-220kV M/C Narrow based towe...
Design,Fabrication, prototype testing & supply of 220/220 KV M/C Narrow based Towers (Design code-KPTCL-2M-NB-NEWDHP) as per the technical specification. 220-220kV M/C Narrow based towers New Devana...
Design,Fabrication, prototype testing & supply of 220/220 KV M/C Narrow based Towers (Design code-KPTCL-2M-NB-NEWDHP) as per the technical specification. 220-220kV M/C Narrow based towers New Devana...
Fabrication and Supply of galvanised 110kV DC Transmission Line MonoPole Towers BDTA (Bagalkot design) A) Tower Type PDT-5 (0deg to 5deg ) a) PDT-5 (0deg to 5deg ) with 3m extension Type Tower
Number Plates (1 No. per tower) with all lead and lifts complete as per specifications and directions of engineer in charge.
Danger Boards (1 No. per tower) with all lead and lifts complete as per specifications and directions of engineer in charge.
Circuit Plate with all lead and lifts complete as per specifications and directions of engineer in charge.
Phase Plate (set of 3 No.) with all lead and lifts complete as per specifications and directions of engineer in charge.
Earth bond 450 mm Long with all lead and lifts complete as per specifications and directions of engineer in charge.
Grounding of tower with GI Pipe including the cost of GI pipe including GI wire.etc., with all lead and lifts complete as per specifications and directions of engineer in charge.
PANTHER ACSR Plain Terrian with all lead and lifts complete as per specifications and directions of engineer in charge.
Insulator strings and clamps for PANTHER ACSR conductor with Hardwares and Arcing Horns :
a) 110KV 90KN Single Tension type composite polymer long rod insulator with sectional length 1160mm along with...
b) 110KV 90KN Double Tension type composite polymer long rod insulator with sectional length 1160mm along with clamps and accessories with all lead and lifts complete as per specifications and direc...
c) 110KV 90KN Single Suspension type composite polymer long rod insulator with sectional length 1015mm along with clamps and accessories with all lead and lifts complete as per specifications and di...
Hardwares for Panther Conductor::
M S C Joints with all lead and lifts complete as per specifications and directions of engineer in charge.
Repair sleeves with all lead and lifts complete as per specifications and directions of engineer in charge.
P G Clamps with all lead and lifts complete as per specifications and directions of engineer in charge.
Vibration dampers with all lead and lifts complete as per specifications and directions of engineer in charge.
A) OPGW- Optical Ground Wire (Supply Package only) Cable & Accessories :
a. 48 Fiber (DWSM) OPGW fiber optic cable with all lead and lifts complete as per specifications and directions of engineer in ...
b. Suspension Clamp assembly for 48 Fibre OPGW with all lead and lifts complete as per specifications and directions of engineer in charge.
c. Tension Assembly for Dead End for 48 Fibre OPGW with all lead and lifts complete as per specifications and directions of engineer in charge.
d. Tension Fitting assembly for 48 Fibre OPGW including all accessories for joint box (splicing location) with all lead and lifts complete as per specifications and directions of engineer in charge.
e. Tension assembly-Double Tension pass through for48 Fibre OPGW (For Monopole towers suitable fittings to be made provision) with all lead and lifts complete as per specifications and directions of e...
f. Tension fitting assembly on suspension Tower for 48 Fibre OPGW including all accessories for joint box (splicing) location with all lead and lifts complete as per specifications and directions of e...
g. Vibration damper for Fibre OPGW with all lead and lifts complete as per specifications and directions of engineer in charge.
h. Down lead clamp assembly for fibre OPGW with all lead and lifts complete as per specifications and directions of engineer in charge.
i. Joint Box for 48 Fibre OPGW with all lead and lifts complete as per specifications and directions of engineer in charge.
Check survey using their own equipment for 66 & 110 kV Plain terrain with all lead and lifts complete as per specifications and directions of engineer in charge.
Conducting drone survey of Transmission ines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements ofvertical, horizontal & ground clearances of ...
Design,Fabrication, prototype testing & supply of 220/220 KV M/C Narrow based Towers (Design code-KPTCL-2M-NB-NEWDHP) as per the technical specification. 220-220kV M/C Narrow based towers New Devana...
Design,Fabrication, prototype testing & supply of 220/220 KV M/C Narrow based Towers (Design code-KPTCL-2M-NB-NEWDHP) as per the technical specification. 220-220kV M/C Narrow based towers New Devana...
Design,Fabrication, prototype testing & supply of 220/220 KV M/C Narrow based Towers (Design code-KPTCL-2M-NB-NEWDHP) as per the technical specification. 220-220kV M/C Narrow based towers New Devana...
Design, developing Structural and Shop drawings of 220 KV Double circuit design based Single side cross arm Monopole Towers as per the Technical Specifications including foundations, Etc.,
Design, developing Structural and Shop drawings of 220 KV Double circuit design based Single side cross arm Monopole Towers as per the Technical Specifications including foundations, Etc.,
Design, developing Structural and Shop drawings of 220 KV Double circuit design based Single side cross arm Monopole Towers as per the Technical Specifications including foundations, Etc.,
Design, developing Structural and Shop drawings of 220 KV Double circuit design based Single side cross arm Monopole Towers as per the Technical Specifications including foundations, Etc.,
Fabrication and Supply of galvanised 110kV DC Transmission Line MonoPole Towers BDTA (Bagalkot design) A) Tower Type PDT-5 (0deg to 5deg ) a) PDT-5 (0deg to 5deg ) with 3m extension Type Tower
Stub Setting templates:
Setting of stub templates and aligning dismantling and transportation of templates from one location to another location for 110 kV with all lead and lifts complete as per spe...
Tower Accessories:
Supplying and fixing Gl angle 45 x 45 x 5 mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower to fa...
Supplying and fixing Barbed wire with all lead and lifts complete as per specifications and directions of engineer in charge
Number Plates (1 No. per tower) with all lead and lifts complete as per specifications and directions of engineer in charge
Danger Boards (1 No. per tower) with all lead and lifts complete as per specifications and directions of engineer in charge
Circuit Plate with all lead and lifts complete as per specifications and directions of engineer in charge
Phase Plate (set of 3 No.) with all lead and lifts complete as per specifications and directions of engineer in charge
Grounding of tower with GI Pipe including the cost of GI pipe including GI wire.etc., with all lead and lifts complete as per specifications and directions of engineer in charge
Conductor & Earth wire: PANTHER ACSR Plain Terrian with all lead and lifts complete as per specifications and directions of engineer in charge
Hardwares for Panther Conductor:
A) OPGW- Optical Ground Wire (Supply Package only) Cable & Accessories
a. 48 Fiber (DWSM) OPGW fiber optic cable with all lead and lifts complete as per specification...
Tack welding of bolts and nuts (No of towers x 250) with all lead and lifts complete as per specifications and directions of engineer in charge
Clearing of bushes tree branches etc., upto 3 mtr width for detailed survey 110 kV plain terrain with all lead and lifts complete as per specifications and directions of engineer in charge
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
TB Supply (Kudumalakunte substation)
CIRCUIT BREAKER : SF-6 Gas circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structures arrangements ...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complete...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complete...
CURRENT TRANSFORMER : Current transformer including marshalling box Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for MOOSE ACSR with all lead and lifts com...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with all lead and lifts complete as per specifications and directions of engineer in charge. i)60 kV, 10 KA, SM type for overhead lines
Control and Relay Panel :
Simplex type control and relay panels complete as per specifications with all lead and lifts complete as per specifications and directions of engineer in charge. b) For 66kV...
STATION STRUCTURES :
Note:1) Weight of station structures and GI mounting structures with all lead and lifts complete as per specifications and directions of engineer in charge.
66KV side Station stru...
STATION STRUCTURES :
Note:1) Weight of station structures and GI mounting structures with all lead and lifts complete as per specifications and directions of engineer in charge.
66KV side Station stru...
GI MOUNTING STRUCTURES including Bolts & Nuts (Lattice type) : Isolator Live point height 4600 mm. (0.752 MT per Structure) with all lead and lifts complete as per specifications and directions of eng...
Current transformer and 11kV NCT (0.158 MT per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
Lightening Arrestors.(0.116 MT per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
Pedestal Insulator :
a. Pedestal Insulator(0.140 MT per structure)for bus with all lead and lifts complete as per specifications and directions of engineer in charge.
T type Rigid bus support structure live point height 6350mm
(Approved Bennavara DPR) with all lead and lifts complete as per specifications and directions of engineer in charge.
Note: Weight of above ...
BUS BAR FORMATION : :
Moose ACSR (66kV side) with all lead and lifts complete as per specifications and directions of engineer in charge.
B) Rigid Bus with Taps & Clamps : 66kV side
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter a) 75mm with all lead and lifts complete as per ...
b) 63mm size connecting isolator to vertical tap with all lead and lifts complete as per specifications and directions of engineer in charge.
ii) A) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end with all lead and lifts complete as p...
Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type -66kV side with all lead and lifts complete as per specifications and directions of engineer in charge. a)Rigi...
Post insulator clamps suitable for 63 mm Aluminium pipe & Post insulator solid core type -66kV side with all lead and lifts complete as per specifications and directions of engineer in charge. a)Rigi...
Corona Bell Suitable for Aluminium Pipe of size 75mm on 66 kV with all lead and lifts complete as per specifications and directions of engineer in charge.
End cap Suitable for Aluminium Tube of size 63mm on 66kV with all lead and lifts complete as per specifications and directions of engineer in charge.
Flexible type terminal connector Suitable for 63mm Aluminium tube to connect isolators with all lead and lifts complete as per specifications and directions of engineer in charge.
i)Post Insulators- Cylindrical solid core as per IS5350, Part II & III
a) 66KV class,1 Unit/stack with all lead and lifts complete as per specifications and directions of engineer in charge.
a)C type wedge connector type suitable for Moose to Panther (line) with all lead and lifts complete as per specifications and directions of engineer in charge.
Copper Control Cable :
1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per techinical specifications. 19 Core 2.5 Sq.mm with all lead and lifts complete as per specifica...
10 Core 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 6 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 6 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Equipments required for establishing SCADA Communicaton as per
KPTCL Specification. :
Multifunctional Transducer with all lead and lifts complete as per specifications and directions of engineer in c...
Optocoupler with all lead and lifts complete as per specifications and directions of engineer in charge.
Note:-1) Satelite communication required will be arranged by SLDC
Supply of power cable for SCADA:
a. Current cable-copper core with 4 sqmm, cross section multistrand 4 core for CT termination (4 core 2 runs)(approximately 20 Mtrs) with all lead and lifts complete a...
b. Voltage cable copper core with 2.5 sqmm, cross section multistrand 4 core for PT termination (approximately 20 Mtrs) with all lead and lifts complete as per specifications and directions of enginee...
Supply of control cable for SCADA:
a. Signal cable armoured copper core with 0.5 sqmm cross section, Multistrand 10 core with all lead and lifts complete as per specifications and directions of engine...
b. Control cable copper core with 1.5 sqmm cross section, Multistrand 10 core with all lead and lifts complete as per specifications and directions of engineer in charge.
A) FODP - Fibre Optic Distribution Panel:
a) FODP 48F : lndoor type consisting of 2Nos of rack mounted LIU each of 48 F (to be housed in FODP) with FCPC coupling and pigtails with all lead and lifts...
B) Fibre Optic Approach Cable:
a) 48 Fibre (DWSM) Fibre Optic Approach Cable - Including accessories and Installation Hardware set for 48 Fibre Optic Approach Cable with all lead and lifts complete ...
TB Erection (Kudumalakunte substation)
CIRCUIT BREAKER : SF-6 Gas circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structures arrangement...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complete...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complete...
CURRENT TRANSFORMER : Current transformer including marshalling box Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for MOOSE ACSR with all lead and lifts com...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type, as per technical specification with all lead and lifts complete as per specifications and directions of engineer in charge. i)60 kV, 10 ...
Control and Relay Panel :
Simplex type control and relay panels complete as per specifications with all lead and lifts complete as per specifications and directions of engineer in charge. b) For 66kV...
STATION STRUCTURES :
Note:1) Weight of station structures and GI mounting structures
66KV side Station structures with all lead and lifts complete as per specifications and directions of engineer in...
STATION STRUCTURES :
Note:1) Weight of station structures and GI mounting structures
66KV side Station structures with all lead and lifts complete as per specifications and directions of engineer in...
GI MOUNTING STRUCTURES including Bolts & Nuts (Lattice type) Isolator Live point height 4600 mm. (0.752 MT per Structure) with all lead and lifts complete as per specifications and directions of eng...
Current transformer and 11kV NCT (0.158 MT per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
Lightening Arrestors.(0.116 MT per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
a. Pedestal Insulator(0.140 MT per structure)for bus with all lead and lifts complete as per specifications and directions of engineer in charge.
T type Rigid bus support structure live point height 6350mm
(Approved Bennavara DPR) with all lead and lifts complete as per specifications and directions of engineer in charge. Note: Weight of above ...
i)Post Insulators- Cylindrical solid core as per IS5350, Part II & III
a) 66KV class,1 Unit/stack with all lead and lifts complete as per specifications and directions of engineer in charge.
Copper Control Cable :
1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands with all lead and lifts complete as per specifications and directions of engineer in charge. 19 Core 2...
10 Core 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 6 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 2.5 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 6 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 2.5 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
Equipments required for establishing SCADA Communicaton as per
KPTCL Specification. :
Multifunctional Transducer with all lead and lifts complete as per specifications and directions of engineer in c...
optocoupler with all lead and lifts complete as per specifications and directions of engineer in charge. Note:-1) Satelite communication required will be arranged by SLDC
Supply of power cable for SCADA
a. Current cable-copper core with 4 sqmm, cross section multistrand 4 core for CT termination (4 core 2 runs)(approximately 20 Mtrs) with all lead and lifts complete a...
b. Voltage cable copper core with 2.5 sqmm, cross section multistrand 4 core for PT termination (approximately 20 Mtrs) with all lead and lifts complete as per specifications and directions of enginee...
Supply of control cable for SCADA:
a. Signal cable armoured copper core with 0.5 sqmm cross section, Multistrand 10 core with all lead and lifts complete as per specifications and directions of engine...
b. Control cable copper core with 1.5 sqmm cross section, Multistrand 10 core with all lead and lifts complete as per specifications and directions of engineer in charge.
A) FODP - Fibre Optic Distribution Panel:
a) FODP 48F : lndoor type consisting of 2Nos of rack mounted LIU each of 48 F (to be housed in FODP) with FCPC coupling and pigtails with all lead and lifts...
B) Fibre Optic Approach Cable:
a) 48 Fibre (DWSM) Fibre Optic Approach Cable - Including accessories and Installation Hardware set for 48 Fibre Optic Approach Cable with all lead and lifts complete ...
Earth Mat formation ::
Supplying, laying and welding MS.Flat 50x6 mm, applying ACB paint to welded portion and covering with soil as per drawing/ standards with Sodium Bentonate clay as per the draw...
Supplying and providing 25mm dia, M.S Rod1.05mtr. long Earthmat Spike including heating, bending top 50mm over lap flattening and making spike edge at one end driving into the earth below the ground l...
Supply and Grounding of equipments with GI flat 50 x6 mm connecting equipments to the earth mat/ground pit. Each point of the earthing with all formation works like bending, twisting, drilling of h...
Grounding of equipments by providing cast iron pipe of 100 m ID 13 mm thickness, 2.75mtrs long with 2 part clamp out of GI flat 50x6 mm continously welded around the pipe using cast iron welding elect...
Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars (non presessrue type for earth pits incuding all lad and lifts, etc., with all lead and lifts complete as per specifications ...
TB CIVIL Kudumalakunte substation:
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring,...
Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment,scarified to a depth of 1...
Construction of embankment by excavating the available approved gravel/murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for drain works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The...
Providing Thermo-Mechanically Treated bars of grade Fe-550D Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent membe...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a 2 coat of approved pa...
Providing 20 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Cutting transverse contraction joints in concrete road using concrete cutting machine with diamond studded saw as per standard technical specificatio and direction of engineer incharge of work includi...
Providing and filling joint sealing compound as per approved drawing and technical specification with coarse sand and 6 percent bitumen by weight, with all lead and lifts complete as per specification...
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
Construction of brick masonry inspection chambers of internal dimension 600x600mm and depth 600mm(inner dimension) with modular bricks in CM 1:6, bed concrete 150mm thick with 1;3:6, platering 12mm t...
Construction of brick masonry inspection chambers of internal dimension 450x450mm and depth 600mm(inner dimension) with modular bricks in CM 1:6, bed concrete 150mm thick with 1;3:6, platering 12mm th...
Providing and laying in position of lean concrete of mix ratio 1:3:6 using 20mm and down size jelly, 100mm thick, before spreading of jelly along with supply of necessary materials, labour, weep holes...
Providing and laying in position Reinforced cement concrete for Road works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specifications including premixing the materila with water at OMC in mechanical mix plant carriage of mixed mater...
Supplying and fixing M15 grade precast cement concrete Kerbstones for Roadway, Sidewalls and gutters fixed with CM 1:3fixed and finsihed in line as per direction of Engineer in charge.
(The cost of PC...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Classconforming to IS:458-1988 with latest amentmentsusing ordinary portland cement, for sanitary works and conveyingto work site, r...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Classconforming to IS:458-1988 with latest amentmentsusing ordinary portland cement, for sanitary works and conveyingto work site, r...
Dismantling chain link fencing including removing the posts, cementconcrete fedestals, foundation and stacking the useful materials safely at a distance to the appropriate disposal area with all lead ...
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area with all lead and lifts complete as per s...
TB Supply (Viduraswatha substation):
CIRCUIT BREAKER : SF-6 Gas circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structures arrangements ...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complete...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators.
A) 66 kV, 1250 A, 40 KA class d...
CURRENT TRANSFORMER : Current transformer including marshalling box Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for MOOSE ACSR with all lead and lifts com...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type, as per technical specification with all lead and lifts complete as per specifications and directions of engineer in charge. i)60 kV, 10 ...
Control and Relay Panel :
Simplex type control and relay panels complete as per specifications with all lead and lifts complete as per specifications and directions of engineer in charge. b) For 66kV...
STATION STRUCTURES :
Note:1) Weight of station structures and GI mounting structures shall be as mentioned in prevailing SR.
66KV side Station structures with all lead and lifts complete as per speci...
ii)Station beams(1B1)suitable for 8.2m bay width (0.553 MT ) with all lead and lifts complete as per specifications and directions of engineer in charge.
GI MOUNTING STRUCTURES including Bolts & Nuts (Lattice type) :
Isolator Live point height 4600 mm. (0.752 MT per Structure) with all lead and lifts complete as per specifications and directions of eng...
Current transformer and 11kV NCT (0.158 MT per Structure ) with all lead and lifts complete as per specifications and directions of engineer in charge.
Lightening Arrestors.(0.116 MT per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
a. Pedestal Insulator(0.140 MT per structure)for bus with all lead and lifts complete as per specifications and directions of engineer in charge.
T type Rigid bus support structure live point height 6350mm
(Approved Bennavara DPR) with all lead and lifts complete as per specifications and directions of engineer in charge.
Note: Weight of above ...
BUS BAR FORMATION : :
Moose ACSR (66kV side) with all lead and lifts complete as per specifications and directions of engineer in charge.
B) Rigid Bus with Taps & Clamps :
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch.40) of following nominal diameter a) 75mm with all lead and lifts complete as per s...
b) 63mm size connecting isolator to vertical tap with all lead and lifts complete as per specifications and directions of engineer in charge.
ii) A) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end with all lead and lifts complete as p...
c)Sliding Type with all lead and lifts complete as per specifications and directions of engineer in charge.
A) Post insulator clamps suitable for 63 mm Aluminium pipe & Post insulator solid core type -66kV side a)Rigid Type with all lead and lifts complete as per specifications and directions of engineer i...
iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66 kV with all lead and lifts complete as per specifications and directions of engineer in charge.
v) End cap Suitable for Aluminium Tube of size 63mm on 66kV with all lead and lifts complete as per specifications and directions of engineer in charge.
vi) Flexible type terminal connector Suitable for 63mm Aluminium tube to connect isolators with all lead and lifts complete as per specifications and directions of engineer in charge.
i)Post Insulators- Cylindrical solid core as per IS5350, Part II & III
a) 66KV class,1 Unit/stack with all lead and lifts complete as per specifications and directions of engi...
a)C type wedge connector type suitable for Moose to Panther (line) with all lead and lifts complete as per specifications and directions of engineer in charge.
Copper Control Cable :
1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per techinical specifications. 19 Core 2.5 Sq.mm. with all lead and lifts complete as per specific...
10 Core 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 6 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 2.5 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 6 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 2.5 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
Equipments required for establishing SCADA Communicaton as per
KPTCL Specification. :
Multifunctional Transducer with all lead and lifts complete as per specifications and directions of engineer in c...
optocoupler with all lead and lifts complete as per specifications and directions of engineer in charge.
Note:-1) Satelite communication required will be arranged by SLDC
Supply of power cable for SCADA
a. Current cable-copper core with 4 sqmm, cross section multistrand 4 core for CT termination (4 core 2 runs)(approximately 20 Mtrs) with all lead and lifts complete a...
b. Voltage cable copper core with 2.5 sqmm, cross section multistrand 4 core for PT termination (approximately 20 Mtrs) with all lead and lifts complete as per specifications and directions of enginee...
Supply of control cable for SCADA:
a. Signal cable armoured copper core with 0.5 sqmm cross section, Multistrand 10 core, with all lead and lifts complete as per specifications and directions of engin...
b. Control cable copper core with 1.5 sqmm cross section, Multistrand 10 core, with all lead and lifts complete as per specifications and directions of engineer in charge.
a) FODP 48F : lndoor type consisting of 2Nos of rack mounted LIU each of 48 F (to be housed in FODP) with FCPC coupling and pigtails with all lead and lifts complete as per specifications...
B) Fibre Optic Approach Cable:
a) 48 Fibre (DWSM) Fibre Optic Approach Cable - Including accessories and Installation Hardware set for 48 Fibre Optic Approach Cable with all lead and lifts complete...
TB ERECTION (Viduraswatha substation):
CIRCUIT BREAKER : SF-6 Gas circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structures arrangemen...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complete...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specification with solid core cylindrical post insulators with all lead and lifts complete...
CURRENT TRANSFORMER : Current transformer including marshalling box Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for MOOSE ACSR with all lead and lifts com...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type, as per technical specification with all lead and lifts complete as per specifications and directions of engineer in charge. i)60 kV, 10 ...
Control and Relay Panel :
Simplex type control and relay panels complete as per specifications with all lead and lifts complete as per specifications and directions of engineer in charge. b) For 66k...
STATION STRUCTURES :
Note:1) Weight of station structures and GI mounting structures shall be as mentioned in prevailing SR.
66KV side Station structures
A) 66KV Side Station structure fabricated out...
ii)Station beams(1B1)suitable for 8.2m bay width (0.553 MT ) with all lead and lifts complete as per specifications and directions of engineer in charge.
GI MOUNTING STRUCTURES including Bolts & Nuts (Lattice type) Isolator Live point height 4600 mm. (0.752 MT per Structure) with all lead and lifts complete as per specifications and directions of eng...
Current transformer and 11kV NCT (0.158 MT per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
Lightening Arrestors.(0.116 MT per Structure) with all lead and lifts complete as per specifications and directions of engineer in charge.
a. Pedestal Insulator(0.140 MT per structure)for bus with all lead and lifts complete as per specifications and directions of engineer in charge.
T type Rigid bus support structure live point height 6350mm
(Approved Bennavara DPR) with all lead and lifts complete as per specifications and directions of engineer in charge.
Note: Weight of above ...
66kV side: INSULATORS :
i)Post Insulators- Cylindrical solid core as per IS5350, Part II & III
a) 66KV class,1 Unit/stack with all lead and lifts complete as per specifications and directions of engi...
Copper Control Cable : 1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per techinical specifications with all lead and lifts complete as per specifications and directions ...
10 Core 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 6 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
4 Core 2.5 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 6 Sq.mm. with all lead and lifts complete as per specifications and directions of engineer in charge.
2 Core 2.5 Sq.mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Equipments required for establishing SCADA Communicaton as per
KPTCL Specification. :
Multifunctional Transducer with all lead and lifts complete as per specifications and directions of engineer in c...
optocoupler with all lead and lifts complete as per specifications and directions of engineer in charge.
Note:-1) Satelite communication required will be arranged by SLDC
Supply of power cable for SCADA
a. Current cable-copper core with 4 sqmm, cross section multistrand 4 core for CT termination (4 core 2 runs)(approximately 20 Mtrs) with all lead and lifts complete as...
b. Voltage cable copper core with 2.5 sqmm, cross section multistrand 4 core for PT termination (approximately 20 Mtrs) with all lead and lifts complete as per specifications and directions of enginee...
Supply of control cable for SCADA:
a. Signal cable armoured copper core with 0.5 sqmm cross section, Multistrand 10 core, with all lead and lifts complete as per specifications and directions of engin...
b. Control cable copper core with 1.5 sqmm cross section, Multistrand 10 core, with all lead and lifts complete as per specifications and directions of engineer in charge.
A) FODP - Fibre Optic Distribution Panel:
a) FODP 48F : lndoor type consisting of 2Nos of rack mounted LIU each of 48 F (to be housed in FODP) with FCPC coupling and pigtails with all lea...
B) Fibre Optic Approach Cable:
a) 48 Fibre (DWSM) Fibre Optic Approach Cable - Including accessories and Installation Hardware set for 48 Fibre Optic Approach Cable with all lead and lifts complete ...
Earth Mat formation ::
Supply and Grounding of equipments with GI flat 50 x6 mm connecting equipments to the earth mat/ground pit. Each point of the earthing with all formation works like bending, ...
Grounding of equipments by providing cast iron pipe of 100 m ID 13 mm thickness, 2.75mtrs long with 2 part clamp out of GI flat 50x6 mm continously welded around the pipe using cast iron welding elect...
Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars (non presessrue type for earth pits incuding all lad and lifts, etc., with all lead and lifts complete as per specifications ...
TB CIVIL (Viduraswatha Substation)
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring,...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings, including fixing the pipe with...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Classconforming to IS:458-1988 with latest amentmentsusing ordinary portland cement, for sanitary works and conveyingto work site, r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid document.pdf
Tender Document • 1.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .