Construction of Sub Division Office Building & Surrounding Development for MGVCL Tarapur at Tarapur under Petlad division office under Anand circle.

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE

BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER

PETLAD DIVISION.

SR.NO. SUMMERY COST

1 Schedule B1 - CIVIL WORK

2 Schedule B2- ELECTRIFICATION WORK

3 Schedule B3 - Fire Safety work

5 ADD 18% GST 0.18

6 Total with GST

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

1 Demolition of R.C.C. work including stacking of serviceable materials and 63.92 Cu.m 1071.63 1082.35

disposal of unserviceable materials with all lead and lift etc. compeleted as

directed by EIC.

2 Dismentalling of PCC including stacking of serviceable material and disposal of 48.27 Cu.m 616.85 623.02

unserviceable material from site of work with all lead and lift etc. compeleted as

directed by EIC.

3 Demolition of Brick Work in cement mortar including stacking of serviceable 261.70 Cu.m 557.32 562.89

materials and disposal of unserviceable materials with all lead and lift etc.

compeleted as directed by EIC.

4 Dismentalling of Tiles of stone flooring laid in mortar including stacking of 306.04 Sq.m 48.63 49.12

serviceable material and disposal of unserviceable material from site of work

with all lead and lift etc. compeleted as directed by EIC.

5 Dismentalings manglore of country tile roofing with battens boarding etc. 182.00 Sq.m 88.64 89.53

including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift etc. compeleted as directed by EIC.

6 Dismentalling Steel work including dismentalling and stacking the materials with 1324.80 Kg. 3.81 3.85

all lead & lift etc. complete as directed by EIC.

7 Desmentalling Doors, Windows, Ventilators etc. (wood or steel) shutters (Not 24.00 No. 190.19 192.09

exceeding 3 Sq.m in area) including chowkhats, architraves, holdfasts and other

attachment etc., complete and stacking them within all lead and lift etc.

compeleted as directed by EIC.

8 Dismentalling of terrace (Brick tile covering with china mosaic water proofing) 97.10 Sq.m 64.67 65.32

including stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift etc. compeleted as directed by EIC.

9 Dismentling wood work, wrought framed and fixed in frames trusses including 9.78 Cu.m 1779.44 1797.23

stacking the materials with all lead and lift etc. compeleted as directed by EIC.

10 Dismentalling C.I. Pipes, G.S.W. pipes, A.C. pipes or P.V.C. Pipes with fitting and 87.25 Ru.m 75.92 76.68

clamps including disposed of useful materials and unuseful material and

cleaning the site with all lead and lift for any Dia. of pipes etc. compeleted as

directed by EIC.

11 Dismantling santtary fittings like wash basin W.C. pan Indian and European 14.00 No. 410.13 414.23

type, flushing tank etc. including stacking the materials with all lead and lift. etc.

compeleted as directed by EIC.

12 Dismentalling Sanitary / plumbing fittings like N.T., all types of tap etc. including 55.00 No. 25.00 25.25

stacking the materials with all lead and lift ……..etc. compeleted as directed by

13 Dismentling WATER TANK fixtures including stacking the material with all lead 2000.00 Litre 0.25 0.25

and lift etc. compeleted as directed by EIC., complete as directed by E.I.C.

14 Credit for the useful material like Roda, Chharu, Reinforcement Steel, Any type 1.00 Job. -100000.00 -101000.00 -101000.00

of Tiles/Stone, Manglore tiles, M.S. Grill, Any type of Door/Window/Ventilator,

Wood, any type of plumbing / drainage / rainwater pipe line and fittings, Water

tank due to Dismentalling the existing structure. (Agency is the owner of this

dismentalled useful material)

15 Excavation for foundation upto 1.5 m depth including sorting out and stacking 893.02 Cu.m 121.72 122.94

of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B)

Loose and soft soil

16 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out 398.86 Cu.m 134.95 136.30

and stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(B) Loose and soft soil

17 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out 58.77 Cu.m 148.17 149.65

and stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(B) Loose and soft soil

18 Providing and filling rubbles including hand packing and filling interstices with 85.60 Cu.m 1083.28 1094.11

quarry spalls behind abutments and between returns as directed.

19 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- 227.36 Cu.m 3720.41 3757.61

graded stone aggregates 20 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth

20 PROVIDING AND FILLING SAND in plinth, foundation and under floors including 99.52 Cu.m 477.03 481.80

watering, ramming, consolidating and dressing in layers not exceeding 20cms in

thickness and in proper level and slope… etc., complete by E.I.C.

21 Providing & laying Granular sub-base by providing coarse graded material 296.22 Cu.m 1111.00 1122.11

Grading-I using B. T. M. C. (Black Trap Machine Crushed) metal 53mm to

26.5mm at 35%, crushed stone aggregate 26.5mm to 4.75mm at 45% and

below 2.36mm at 20%, having CBR not less tha 30%, as per table 402 of

MORTH gradation including leveling the material at site of work , mixing and

spreading into grade and camber, watering and consolidation at OMC with roller

including cost of material , labour etc complete GSB

22 Providing and laying controlled cement concrete M:25 (minimum cement 94.06 Cu.m 4597.00 4642.97

content of 380 kg/cmt, i.e. 7.6 Bags per Cmt) and curing complete including

cost of necessary, form work, compacting with vibrator curing centering &

shuttering in true line and level etc, but excluding the cost of reinforcement,

(Note: rate includes providing PLYWOOD form work shuttering so as to give a

smooth exposed finish including centering (adjustable tubular steel supports).

Shuttering, strutting and propping etc. for any height of propping and centering

below supporting floor to ceiling , and removal of the same for reinforced

concrete and plain concrete. Item no 27 to 44 use of Vibrator and Mixture

machine for mixing concrete is compulsory) complete as directed by E.I.C. (the

proportioning of cement and aggregates shall be done by weight and necessary

precautions shall be taken in the production to ensure that the required work

cube strength is attained and maintained) for RCC work in Foundations footings,

base of columns and Raft etc., for any type of cross section area complete as

directed by E.I.C.

23 Do as above but for (B) COLUMNS: (iii) Having cross-sectional area more than 71.46 Cu.m 7528.80 7604.09

0.12Sq.M and upto 0.18 Sq.M

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

24 Do as above but for (A) BEAMS :(iii) Having cross-sectional area more than 88.63 Cu.m 7971.98 8051.70

0.12Sq.M and upto 0.18 Sq.M

25 Providing and laying controlled cement concrete M:25 (minimum cement 182.26 Cu.m 6688.80 6755.69

content of 380 kg/cmt, i.e. 7.6 Bags per Cmt) and curing complete including

cost of necessary, form work, compacting with vibrator curing centering &

shuttering in true line and level etc, but excluding the cost of reinforcement,

(Note: rate includes providing PLYWOOD form work shuttering so as to give a

smooth exposed finish including centering (adjustable tubular steel supports).

Shuttering, strutting and propping etc. for any height of propping and centering

below supporting floor to ceiling , and removal of the same for reinforced

concrete and plain concrete. Item no 27 to 44 use of Vibrator and Mixture

machine for mixing concrete is compulsory) complete as directed by E.I.C. (the

proportioning of cement and aggregates shall be done by weight and necessary

precautions shall be taken in the production to ensure that the required work

cube strength is attained and maintained) for RCC work in Foundations footings,

base of columns and Raft etc., for any type of cross section area complete as

directed by E.I.C. for RCC work in LINTLE-BEAM, LINTEL & SILL for all cross

sectional area at G.F. & F.F. Lvl. etc., complete as directed by E. I. C.

26 RCC work in Wall (Vertical and horizontal fins).,&Wall cap & coping upto G.F. & 1.30 Cu.m 7542.50 7617.93

F.F level., etc. Complete, as per detailed & directed by Architect / Consultant &

and directed by EIC.

27 Providing and laying controlled cement concrete M20 for trimix RCC Excluding 137.15 Cu.m 6656.40 6722.96

the cost of reinforcement & including of using 125 micron polythine sheet at

base of concrete using approved quality of polyester fiber (12mm) during

mixing of cement concrete @ 125 gm per bag) and or as per manufacturing ,s

specification of cement concerte @ 125 gm per bag) and or as per

manufacater's specification including preparing the sub base with form work of

M.S Chhanel of requiared size to maintain level and slope of concrete with using

surface vibrator ,finishing the surface with power floter and trove ,light

brooming on the surface with providing construction joints of size 10 mm wide

25mm deep in transverse direction @ 4.5 m C/C with sealing the same with

approved quality bitumen sealent and providing expansion joints of size 25 mm

width and up to throught depth of concete using 25 mm thick dura board HD -

100 of approved quality and sealing the same with approved quality bitumen

sealent at 40 meter C/c and or as directed using concrete cutter machine with

necessary equipments ,labours tools tackles etc complete as directed by EIC.

28 Providing and fixing premoulded compressible filler board in black colour 84.89 Sq.m 586.28 592.14

confirming to MoRT&H Specifications (Clause 1015), having minimum density

95kg/cum, non-staining with less than 1% water absorption & compression

recovery of 93% minimum as per specification for 12 mm wide expansion joint

including cutting to required size and shape at all levels etc.complete as

29 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 1350.65 Cu.m 135.56 136.92

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

30 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 600.08 Cu.m 291.47 294.38

thickness including watering, ramming and consolidating etc. complete.

31 Providing Brick masonry using common burnt clay building brick having crushing 136.33 Cu.m 5072.76 5123.49

stregth not less than 35Kg/Sq.Cm. in foundation and plinth in Cement Mortar

(1:6) (1-Cement : 6-Fine Sand) including racking out joints up to 12mm depth,

scaffolding, curing, filling up the gaps between the joints complete as directed

by E.I.C. Fly Ash Bricks

32 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 67881.82 Kg. 76.52 77.29

binding and placing in position complete at all floor level.

33 Providing Brick masonry using common burnt clay building brick having crushing 118.07 Cu.m 5351.69 5405.21

stregth not less than 35Kg/Sq.Cm in Super Structure G.F+F.F+Stair Cabin

cement mortar 1:6 including racking out joints up to 12mm depth, scaffolding,

curing, filling up the gaps between the joints complete as directed by E.I.C. Fly

34 Providing Half brick masonry in common brunt clay building bricks having 198.13 Sq.m 755.55 763.11

crushing strength not less than 35kg/sq.cm in cement mortar 1:4 ( 1-cement : 4-

coarse sand) in super structure above plinth level to floor two level (C) Fly Ash

35 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of 1017.37 Sq.m 251.88 254.40

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) including

finishing with a floating coat of neat cement slurry at all Floor level.

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

36 Providing 10mm thick cement plaster in single coat on brick/concrete walls for 443.02 Sq.m 226.08 228.34

interior plastering upto floor two level and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand) at All Floor level

37 20mm thick sand faced cement plaster on walls above ground level consisting of 1709.23 Sq.m 348.95 352.44

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. at All Floor level.

38 Providing and applying BRICK STAMPING on exterior face of the structure as 230.34 Sq.m 1183.60 1195.44

per sample approved by the architect and/or engineer - in - charge including

cleaning and brushing the surface, providing requisite base coat and top coat as

per the requirement of the design, cleaning the surface and making good and

finishing with weatherproof coat etc. complete with all necessary material,

labour, tools, tackles, hardware, accessories, scaffolding etc. all to the

satisfaction of the architect and/or engineer - in - charge. The rate shall be for a

complete item and applying at all heights, all floors and all levels (a) Luxture

"Decorcem" - Exposed BRick Finish etc., complete as directed by E.I.C.

39 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 53.99 Ru.m 24.04 24.28

1:1 including neat cement finishing, watering etc. complete at all floor level.

40 Providing throating or plaster drip and moulding to R.C.C. Chhajja at all floor 96.69 Ru.m 42.62 43.05

41 Vitrified Tiles Flooring at Ante Room Toilet : Providing and laying Matt 375.66 Sq.m 1585.00 1600.85

finishVitrified tiles flooring Premium Quality double charge HD of approved

make shade and pattern of 600x600mm size in flooring, skirting etc., using

minimum 10 mm thick tiles of as per approved make list by architect/client, neat

cement slurry over cement sand beading 65mm.th. . in 1:6 including flush

pointing in white/colour cement with pigments of matching shade and jointed

with 3mm thick epoxy grouting as per approved make of approved shade and

colour in proper line and level as per detailed drawing / instruction and

approval by architect. The rate shall be inclusive of protecting the flooring by

plaster of Paris applying and after completion of work remove or 4 mm thick

protection sheet of Supreme make EPE+HM Blue. Including cost of all type of

tools, tackles, all labour, materials, transportation, cleaning , at all floor, all level,

all depth, all Height, all lead and lift , work complete as per the detailed

drawing, approved sample, specifications and instruction of Architect/EIC.

Sample mock shall be approved from Architect/EIC. (A) Tile size: 600 mmX

mm, Matt finish Vitrified tiles, Basic rate of tile is Rs. 70/Sqft

42 Providing and laying 18mm thick polished Granite stone SLAB flooring, trade of 236.67 Sq.m 3000.00 3030.00

step ,riser of step Laanding , door sill (umra) on 20mm (average) thick base of

cement mortar 1:6 (1 cement : 6 course sand) laid over and jointed with

coloured cement slurry including rubbing and polishing and including making

half round moulding to toe of treads etc.. complete as directed by Engineer in

43 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of 30.90 Sq.m 1453.19 1467.72

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

44 Providing and laying coloured glazed tiles/GVT (Matt /Glossy)Vetrified of the 228.81 Sq.m 1473.50 1488.24

size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm /600 mm X600

mmX8 mm /1200mm X600mmX10 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.( As directed by EIC /Architect )

45 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 216.70 Sq.m 699.93 706.93

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

46 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete 183.30 Sq.m 371.21 374.92

block 30cm length,30cm height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

47 Providing and fixing 18 mm thick, one side polished granite neolith/neno 8.88 Sq.m 4878.30 4927.08

G7/artifical/natrual stone slab for kitchen platform and for back side platform

with side facia and skirting above platform/shelves in the kitchen including

making facing edge bull nose moulding/edge champhering with matching

polishing to give high gloss finish etc. complete and sealing all joints with epoxy

resin based adhesive as directed. In kitchen, the granite slab is to be fixed over

kota stone slab with cement mortar 1:4 with cement grout and other three

edges of granite slab shall be embedded 20 mm into the wall. The finished

portion of granite slab shall be taken for measurement in sq. m and no

deduction shall be made for area of granite cut for sink. Item includes cost of

cutting hole for sink with opening edge rounding, cost of all materials,

transportation, labour charges, curing etc. complete as directed. The end

portion of the platform is to be provided with granite facia over the vertical

marble support and up to 450mm height above the platform. The skirting/facia

etc. will be measured in sq. m only. [Basic rate of granite @ Rs. 230- per sq. ft]

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

48 Providing, Supplying and Fixing of 35mm (Total) Thick Flush Door Shutter with 35.50 Sq.m 3381.74 3415.56

1mm Thick Green make Laminates on Both Side of Shutter. Making /

Construction of Flush Door is with Pine or southern Yellow Pine Filler and with

Lock rail on Center. Flush Door Provide with Teak wood beading patti (35mm X

12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood

of size 75mm x 60mm with Chemically Treated and Seasoned Including Paint

Matching with Laminates. Frame & Flush door shutter having 5 year warranty

against attack of biological agent like termite, borers, decay, fungi and harmful

insects also warranty against seasoning related issues like crack, bending,

twisting, warping. Laminates on shutter shall be press by cold press method.

Shutter shall be brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is free from

nail mark & any damages etc. Rates are also Inclusive of all Labors & Proviging

15cm. Long 6 No of Hold Fast (25mm X 5mm) & 3 No of 6 Inch S.S. but Hinges,

100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing

following S.S. Fixtures And Fastening. (1) Aldrops 1 No, 250mm x 16mm & Tadi

1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push Door

Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick (5) Shutter size:

as per drawing. Door are Fixing as per Details Drawing & Instruction of Engineer

in charge. All Materials Used Shall be as Per approved Material Make List. The

Required Frame is to be Obtained from Vanil Udhyog Maked Only. Contractor

should give guarantee of water proofing for 5 years. All the material including

cement should be brought by the contractor at his own cost. 10% Amount will

be kept with company during guarantee period. (Reduced Rate shall be

provided for smaller size)

49 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter 17.52 Sq.m 2589.15 2615.04

having extra reinforcement on sides & edges in polish finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener

sleeve. at all floor level.

50 DOMAL SERIES WINDOW: Providing & Fixing Three Track Domal Window 52.72 Sq.m 11884.00 12002.84

having Extruded aluminium Colour anodized Sliding Section outer frame size

mm X45 mm Weight 1.555 kg/m and Shutter frame 27 mm X 65 mm Weight

0.851 kg/mand Section inner patti Size 38.70 mm X 28.50 mm Weight

kg/m with 5 mm Clear Glass including EPDM Gasket, Woolen In Shutter, Multiple

Lock, Anti Rattling Guide, Lock Guide, handle Antilifting, Shutter Corner Clit,

Shutter wing Connecter, Interlock EPDM Gasket, Interlock Guide, Anti Capillary

Pad, Bush Bottom silicon all side & All Necessary Hardware etc. complete as per

detailed drawings including all accesible accesories Complete etc as per

Instruction of the EIC/Architect.

51 Providing and fixing M.S. grills of required pattern to frames of windows & 1308.15 Kg 105.18 106.23

ventilation etc. with M.S. flats at required spacings and frame alround, square

or round bars with round headed bolts and nuts or by screws (A) Plain Grill. Etc

complete as directed by architect /EIC at all floor level.

52 Providing , fabricating & erecting in position all type of steel fabrication like , MS 2340.55 KG 100.00 101.00

hollow section, M.s. angle , channels , girders, plain bar etc for coloumns etc

including welding the section as per instruction & drawing making holes &

coats of oil paintings with one coat of red oxide Providing & fixing M.S. Grill of

required pattern to wooden frames of windows / walls etc. with M.S. Flats at

required spacing and frame all-round or square / round bars including fixing

with round headed bolts and nuts or by screws as directed by E.I.C. Rate

includes cost of applying three coats of Synthetic Enamel over one coat of Red

Oxide of approve shad and make as directed by the EIC.

53 Applying priming coat over new steel and other metel surface after and 108.78 Sq.m 127.85 129.13

including preparing the surface by throughly cleaning,oil,grease, dirt and other

foreign matter and scoured with brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing red lead. and Painting two coats

(excluding priming coat) on new steel and other metal surface with enamel

paint, brushing, interior to give an even shade including cleaning the surface an

even shade including cleanicn the surface of all dirt, dust and other foreign

matter. at all floor level.

54 Extra over above Item for every subsequent coat of paint 108.78 Sq.m 56.69 57.26

55 Providing & fixing 6mm thick Lexan POLYCARBONATE MULTIWALL ROOFING 26.39 Sq.m 1427.62 1441.90

SHEET fixed with hilty screw and rubber silicon sealer and allminum street of

size 50x3mm etc. complete as directed by E.I.C.

56 Providing and Fixing Stainless Steel 304 Grade 16 gauge railing with 38 MM Dia 37.11 Ru.m 2500.00 2525.00

Top Pipe, 38 MM Dia Vertical support at every 1.0 Mtr C/C maximum & Two Nos

of 20 MM Dia horizontal pipe as per design as per good engineering practice,

the end condition of pipe shall be closed with SS Cap & properly grinded. The

measurement shall be consider & paid for top pipe only.

57 Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or 1460.39 Sq.m 164.35 165.99

equivalent & two coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered smooth

with Wall painting (Three coats) of plastic emulsion paint of approved brand and

manufacture on undecorated wall / Ceiling surfaces to give an even shade (work

for all the floors)

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

58 Finishing wall with Weather proof exterior primer befor applaying paint on wall 2257.37 Sq.m 32.00 32.32

surface (two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials. etc complete.

59 Finishing wall with weather proof exterior emulsion paint on wall surface (two 2257.37 Sq.m 119.07 120.26

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

60 Providing China Mosaic water proofing treatment in Terrace of different levels 419.53 Sq.m 1348.52 1362.01

preparing roof surface for laying brick bat on cement mortar (1:4) with special

water proofing composed in necessary gradient for easy flow of rain water,

brick bat coba is finally covered by China Mosaic Tikdi fixed by white cement

base added with special water proofing compound. The treatment is carried

along the vertical surface of the parapet and other joining wall up to height of

about 300 mm in a shape of quarter round vata. The average thickness of the

water proofing treatment is about 140 mm. Minimum thickness at rain water

outlet points being 75 mm including curing etc. complete as per specification

and instruction including water proofing test for minimum 3 days etc., complete

as directed by E. I. C. Contractor should give guarantee for water proofing for

years. All the material including cement should be brought by the contractor at

his own cost. 10% Amount will be kept with company during guarantee period.

61 Providing & Fixing ready made 2000/5000 LITRE capacity P. V. C. water tight 2000.00 Litre 14.63 14.78

storage tanks made from linear low density polyethylene & low density

polyethylene LDPF product confirming to I. S. : 10146 - 1982 with cover

including providing & fixing one float valve ball-cock, one of G. I. Waste pipe

with plug one of G. I. Over flow pipe of length up to 0.30 mt. including making

all connection for inlet /outlet supply with necessary fittings for outlet / inlet

etc., complete as directed by EIC. (Syntex water tanks, 3-2000LTR + 2-

5000LTR, white)

62 Carring out plinth treatment to post construction / existing structure by spraying 469.76 Sq.m 123.12 124.35

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As

Per 6131_paret-II Consentration Weight one percent is recommended i.e one

litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of

one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

63 Extra for additional height of PROPPING AND CENTRING where the height of 22.37 Sq.m 403.71 407.75

propping and centering exceedes 4.0m between supporting floor to ceiling

including temporory brick or stone pillors for supporting as required for the

height more than 4.0m and upto 5.00m etc. completed as directed by EIC.

64 Extra for additional height of PROPPING AND CENTRING where the height of 2.36 Sq.m 707.77 714.85

propping and centering exceedes 4.0m between supporting floor to ceiling

including temporory brick or stone pillors for supporting as required for the

height more than 5.0m and upto 6.00m etc. completed as directed by EIC.

65 Extra for additional height of PROPPING AND CENTRING where the height of 0.68 Sq.m 592.04 597.96

propping and centering exceedes 4.0m between supporting floor to ceiling

including temporory brick or stone pillors for supporting as required for the

height more than 6.0m etc. completed as directed by EIC.

66 Providing and fixing 450 mm effective dia.(after laying) Hot dip galvenised 184.55 Ru.m 350.00 353.50

twin Razor type concencenterina coil with all required clips ,pins,etc. as per

specification. Concentrina coil shall be fixed to M.S. Angles with RBT (Razor

barbed tape) with help of u- nails with split pin. Rate quoted on running meter

of compound wall basis ( 1) Effective dia. of coil after steching shall be 600mm.

67 Providing and fixing Chain link roll having 10 gauge wire & 50x50mm jali with 8.29 Sq.m 270.00 272.70

appropriate height as directed and fixing the same to MS angle and providing

and fixing MS flat bedding by means of MS nut & bolts etc. complete as directed

68 Supply & laying of suppotr RBT(Razor barbed tape) with the help of u 600.00 Ru.m 18.75 18.94

nails/split pin. Rate shall be quoted on running meters of RBT laid.

69 Providing and Laying of Pre Growned natural Grass of Size 24" x 12" on 151.89 Sq.m 403.46 407.49

Fertilised soil layer with necessary items such as furtilizer, water sprinkling

etc.Natural Grass Must be supplied with fully growned and attached with soil

lump of 0.1 m thick with grass including Fixing and growing of grass at site with

maintaing grass untill grass is fully attached with soil layer etc as per directed by

70 Supply Samplings of Jasud, Ixora, Ticoma Gaudichandi, Bougainvilla, Karen, 100.00 Each 174.98 176.73

Limbu Cotton, Morpankh, Yellow Ticoma, Gultora, Jetropha, Haemliya,

Chandani, Mogaro, Galfemia, Allamenda, Desi Gulab, Euphorbiamili, Jasud

Hybrid, Chandani Double, Madhukamini, Madhumati, Ticoma Capensis, Ixora

Draft, Nikadevia, ENglish Karen Etc. Having Height of Minimum 2.0 to 2.5 ft and

Bag Size of 8" x 10", Well Branched, Well Established and Free From Diesease at

site as per the instructions.

71 Providing and Growing of Arecca Palm Plant ot Foxtail Palm having height 2.40 35.00 Cu.m 1749.83 1767.33

m to 2.70 m with 12 to 14 Suckers, well developed, fresh and healthy with lush

green foliage in 35 cm size of bucket type cement pots and as per Direction of

the Engineer in charge.

72 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( 61.23 Ru.m 193.73 195.67

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

73 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( 68.61 Ru.m 146.65 148.12

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

74 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( 11.52 Ru.m 90.93 91.84

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

75 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( 22.50 Ru.m 71.93 72.65

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

76 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 2.00 Nos. 136.52 137.89

77 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 7.00 Nos. 656.86 663.43

78 Providing and fixing screw down bib taps of following size.(A) Brass screw down 8.00 Nos. 184.98 186.83

bib tap polished bright. (i)15mm dia.

79 Two way bib Tap: Providing and fixing two way bib tap with flange for wall 6.00 Nos. 2258.00 2280.58

hung water closet including fitting withtaflon tap in position, including plubming,

transportation, tools tackles, fitting work and fitxures for the same etc complete

as directed EIC. Code for the Two way tap : Kerovit KB1511005 or Kohler /

Jaquar / reputed make having base price more than ₹1,600.00

80 roviding and fixing brass screw down stop tap. (A) 15mm dia. 16.00 Nos. 203.79 205.83

81 EWC: Providing and fixing Wall Hung water closet (European type W.C. pan) as 6.00 Nos. 7085.00 7155.85

per approved make of selection & shade with PP soft close seat cover, P OR S

Trap M.S. or G.I bracket , CP brass hinges and rubber buffers and Jointing the

trap with soil pipe in cement mortar : 1:1 (1 cement : 1 fine sand) including

cutting and making good the walls and floors where required with all labour and

materials. All works to be carried out as per instructions and direction of

Engineer-in-charge. (Model Jeguar CNS-WHT-959SPP or Cera cordo -

82 Flushing Tank: Providing and fixing Preumatic Flushing tank with connector 6.00 Nos. 4710.00 4757.10

accessories, complete. including all type of finishing. (Model Jaguar JCS-WHT-

83 Flushing Plate: Providing and fixing CONTROL PLATE ALIVE - CHROME flush 6.00 Nos. 1285.00 1297.85

plate with all accessories, complete. including all type of finishing. (Model Jaguar

JCP-CHR-852415)

84 Health faucet: Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 6.00 Nos. 1415.00 1429.15

1.2 Meter Long Flexible Tube & Wall Hook, complete. including all type of

accessories. (Model Jaguar ALD-573)

85 Providing and fixing Urinal pan white color of Jaguar make 355x340x535mm 5.00 Nos. 6037.50 6097.88

(URS WHT 13261) including waste coupling, pipe and labour charges with all

tools and tackels

86 Providing and fixing Urinal valve auto closing system built in control cock and 5.00 Nos. 3852.50 3891.03

wall flange (Jaguar PRS CHR 077) and spreader with lobour charges with

necessary tool and tackels.

87 WASH BASIN: Providing and fixing table top washbasin suitable for pillar tap 6.00 Nos. 9361.00 9454.61

including fixing on granite with adhesive chemical, waste coupling Half / Full

threaded and waste coupling up to 130mm compatible with table top basin

including, o ring, rubber plug, nut, nipple, Angle valve 15 mm heavy duty with

cap - flange, including fitting & fixing in socket in position with required

accessories, making the hole in granite, including plubming, transportation,

tools tackles, fitting work and fitxures for the same etc complete. Wash Basin :

Kerovit KADIN - KS277 or Kohler / Jaquar / reputed make having base price

more than ₹5,900.00 and Waste coupling code Kerovit KA870005/06 or Kohler /

Jaquar / reputed make having base price more than ₹775.00, angle valve code

kerovite KA 910001 or Kohler / Jaquar / reputed make having base price more

88 Bottle Trap: Providing and fixing Bottle trap including, o ring, rubber plug, fitting 7.00 Nos. 2368.00 2391.68

& fixing in position with required accessories, including plumbing,

transportation, tools tackles, fitting work and fitxures for the same etc complete.

Bottle Trap : Kerovit KA870002 or Kohler / Jaquar / reputed make having base

price more than ₹1875.00

89 Pillar tap: Providing and fixing Tall Pillar tap including making the core in 6.00 Nos. 6215.00 6277.15

granite, Long braided Hose suitable for tall basin, o ring, rubber plug, fitting &

fixing in position with required accessories, , including plumbing, transportation,

tools tackles, fitting work and fitxures for the same etc complete. Pillar tap :

Kerovit KB811002 or Kohler / Jaquar / reputed make having base price more

90 Automatic Hand Dryer: Providing and fixing Dolphy or its equivalent make 5.00 Nos. 3331.00 3364.31

Automatic Hand Dryer of 1800 watt, temperature of Wind 60 ± 20 celsius

including fitting & fixing in position with required accessories, including

transportation, tools tackles, fitting work and fitxures for the same etc complete.

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

91 Pantry sink: Providing and fixing Pantry/Kitchen sink of Nirali make including all 1.00 Nos. 10797.00 10904.97

fitting material including Fixing off including grid drain, stop cock, fittings of

bottel trap and fixing on wash basin counter by tile adhesive of approved make,

with necessary plumbing work as per detail drawing and plumbing work,

complete. Material approved by architect/E.I.C. (Model, NIRALI GRACE JUMBO

685X535X254. + LYR-38053 Stop cock) (Note: bottol trap will be paid

92 Mirror with light (18 x 24 inch): Providing and fixing Plantex or its equivalent 6.00 Nos. 4308.00 4351.08

make Mirror with Light (18 X 24 inch) , Made From a 5mm HD environment-

friendly copper-free silver mirror with a classic design, have three different light

(White Light, Natural Light, Warm Light) modes of 3000k/4500k/6000k, P54

rated water-proof ensures safe when the LED bathroom mirror lighting is in wet

bathroom environments, including fitting & fixing in position with required

accessories, , including transportation, tools tackles, fitting work and fitxures for

the same etc complete.

93 Providing and Fixing U shape Rail Wall Mounted Rail (With Hinge) Cera Make 1.00 Nos. 10400.00 10504.00

cat.No B2210108 size 750 X 100 mm (Provided 600X 100 MM Size Cat

No.B2210107 thand RR Of RS. 8988)

94 Providing and Fixing Wall Mounted Grab Bar 600 MM Cera Make cat.No 2.00 Nos. 2795.00 2822.95

95 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter 11.00 Nos. 580.47 586.27

with jali of the following nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of cutting and making good

96 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type 38.72 Ru.m 826.12 834.38

B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

97 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type 39.71 Ru.m 868.22 876.90

B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

98 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 31.63 Ru.m 335.69 339.05

polythene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(F) 110mm

99 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 49.50 Ru.m 277.46 280.23

polythene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(F) 75mm

100 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 16.82 Ru.m 130.65 131.96

polythene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(D) 40mm

101 Providing & fixing 110 mm dia. PVC " Cowl Vent" of ISI make of working 4.00 Nos. 385.88 389.74

pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in true line and level

etc. complete as directed by Engineer In charge.

102 Providing & fixing 75 mm dia. PVC " Cowl Vent" of ISI make of working 5.00 Nos. 385.88 389.74

pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in true line and level

etc. complete as directed by Engineer In charge.

103 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and 5.00 Nos. 1279.40 1292.19

water tight C.I. cover with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type.

104 Constructing brick masonry chamber for underground C.I. Inspection chamber 6.00 Nos. 2903.89 2932.93

and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

105 Extra over items 24.44 for every additional depth of 0.1M. of part thereof 24.00 Nos. 239.99 242.39

beyond 450mm depth for Brick masonry chamber.(i) for 455mm x 610mm size.

106 Providing and fixing to wall ceiling and floor (Rainwater Line) 10.0 Kg. F/Cm2 52.73 Ru.m 335.69 339.05

working pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc. including

making good the wall ceiling and floor.(G)110 mm

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

107 Providing and constructing B.B masonary and cement concrete for SEPTIC 1.00 Nos. 44785.09 45232.94

TANK of 3m x 0.9m x 1.5m depth internal dimention with excavation &

depositing off the excavated stuff as and where directed including providing

laying brick masonary in C.M. 1:6 (1 cement : 6 sand) with using common burnt

clay fly ash building brick having crushing strength not less than 35kg/sq.m for

necessary compartment for chamber & septic tank with nesessary inlet & outlet

with cement plaster 15mm thick on wall, I.P.S. flooring, bed concrete, R.C.C.

top slab, M.H. cover 610mm x 455mm and C.I., air vent pipe with cowl vent and

cement vata of 10cm x 10cm size in C.M. 1:1 etc.. complete as per detailed

drawing and directed by E.I.C.

108 Providing and constructing double wall SOAK WELL of 2.50m internal dia. & 1.00 Nos. 85698.68 86555.67

5.50m depth (0.50m above G.L.) internal clear dimention including the cost of

excavation, foundation 1:4:8 for outer wall & honey combed fly ash brick

masonary of 3.00m height in C.M. 1:6 (1 cement : 6 coarse sand), casting

R.C.C. 1:2:4 (1 cement : 2 sand, 4 graded sone aggregate 20mm nominal size)

top slab 12mm thick with super quality RCC Manhole cover 60cm x 45cm size,

75mm dia. C.I. pipe 1.80m long with 75 mm dia cowl vent and filling between

the wall including providing vata in C.M. 1:3 (1 cement : 3 sand), plastering up

to top & outer wall up to 300mm deep from G.L., curing including cost of

reinforcement etc. complete as per drawing & as directed by E.I.C

109 Drilling of borewell of 325mm dia by machine in all kind of soil ,sand 1675.59

,murrum, soft rock hard rock and hard murrum etc up to required depth

complete truly vertical with equipments & labours etc complete as directed

110 Developing, Clearing & giving yield test for the bore well by required size 6969.00

of compressor & pump running for 12 hours or till no sand comes off with

the pumped water with necessary pipes lowering & removing pipes in well 1.00 NO

etc., with all equipments required to carry out the test etc., complete as

directed by E.I.C.

111 Supply of approved quality washed graded gravel of size of 3mm to 6mm 2049.29

including packing the same in angular space between casing pipe and bore

hole. Before packing, the gravel shall be screened and all undersized and 5.00 Cmt

oversized particals shall be removed. the gravel shall be free from all

impurities and foreign materials.

112 Providing of 10 gauge MSPlate with set of Cap, clamp and reducer to col 1010.00

pipe tomain pipe, similar at pump side etc.,

113 Providing fixing and lowering 200 mm dia OD having wall thickness 8.8 to 9.8 1564.49

mm PVC CM casing/Stainer pipe of IS :12818

AROMA,ASTRAL,ASHIRVAD,FINOLEX make or it`s equivalent including 60.00 RMT

necessary threading couplings connections etc. cvomplete as directed by

114 Providing & laying 50mm dia. approved ISI quality UPVC Column pipe of 10 195.94

feet length each of Ashirvad,Astral,Finolex,Prince or its equivalent

including making required threading, coupling, closing clamping,fixing the

same etc. Completed as directed by E.I.C.

115 Supplying and lowering the approved ISI Submersible pump for 7.5HP/18 34845.00

stage in bore well etc. comp. as directed including ISI approved MEI type

oil immersed auto transformer starter commissioning and testing to

required delivery head.

116 Providing and fixing approved quality controlled panel board meta lmeter 3535.00

box ISI with a main fuse connection amperemeter, voltmeter 30Amp

phase switch single phase preventer cum water level guard and male and 1.00 NO

female type socket 1 phase indicator lamps and toggle switch etc. includig

wiring/earthling complete as directed by EIC

117 Providing and joining approved quality flat copper cables 2.5mm flat 85.85

sufficient pump set etc. complete as directed by eic.

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick

(19mm + 6mm) patta of 300mm width fixed on bottom periphery .The plywood

table top is laminated on top and bottom.the front edges of the table top

surface is to be covered with 12mm thick teak wood bedding patty with

melamine polish finish of approved shed.The Rate includes the cost of fixiing

telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs

made from plywood with exterior side 1mm and interior side 0.8mm approved

laminate. Appron should be made from plywood with laminated finish as per

detail drawing and CPU Trolley should be supplied of metal powder coated.

Footrest (0.75 x 0.37) should be from teakwood with melamine polish

complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from

19mm plywood with 1mm outside and 0.8mm inside laminate as well as

approved shade for Left or Right sidewith wooden bidding patti on nylon castors

with handle,lock and telescopic channel.Rate includes the cost of all

materials and labour etc. complete as per detail drawing and instruction of

engineerin charge.The necessary hardware fitting shall be as per approved

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick

(19mm + 6mm) patta of 300mm width fixed on bottom periphery .The plywood

table top is laminated on top and bottom.the front edges of the table top

surface is to be covered with 12mm thick teak wood bedding patty with

melamine polish finish of approved shed.The Rate includes the cost of fixing

telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs

made from plywood with exterior side 1mm and interior side 0.8mm approved

laminate. Appron should be made from plywood with laminated finish as per

detail drawing and CPU Trolley should be supplied of metal powder coated.

Footrest (0.75 x 0.37) should be from teakwood with melamine polish

complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from

19mm plywood with 1mm outside and 0.8mm inside laminate as well as

approved shade for Left or Right sidewith wooden bidding patti on nylon castors

with handle,lock and telescopic channel.Rate includes the cost of all materials

and labour etc. complete as per detail drawing and instruction of engineer in

charge.The necessary hardware fitting shall be as per approved make list.

Providing and fixing Cluster (Workstation) as per drawing, Framing the skeleton

38mm (19mm+19mm) thick vertical and horizontal plywood patti both side

with 6mm for grooving design and finishing with selected laminate. Before

installation, make hole/face plate for conduit pipes of electrical/networking

cables with openable stud from horizontal partition. Vertical support of 38mm

(19mm+19mm) thick double plywood cover with 1mm laminate finish including

teakwood bedding on exposed edges with melamine polish. Fitted 25mm

(19mm+6mm) thick (plywood interior grade) post forming laminated top, fixed

with metal clamps including suspended metal keyboard-mouse tray fixed with

telescoping channel, cable manager and seperate Drawer unit box (0.65 x

x 0.43) should be made from 19mm plywood with 1mm outside and 0.8mm

inside laminate as well as approved shade for Left or Right side with Wooden

Bedding Patti on Nylon Castors with Lock and Telescoping Channel of HAFELE

with Providing and fixing of softboard (12mm thick) OR glass (5mm thick) as

per detail Drawing, instruction of engineer in

charge and Architect.

121 Low Ht. Storage (0.46 Depth) 35.22 SQMT 9954.90 10054.45

Providing and fixing low height storage with 25mm thick plywoodboard.Top

shuttermade from19mm thick plywood in approved shade with vertical and

horizontal surface 19mmplywood with inside 0.8mm and outside 1mm laminate

finish with 6mm thick Plywood & 0.8mm Laminated Finished at Backside. All

teakwood bidding should be finished by melaminepolish with support of S.S.

lock,handle,etc.complete.and Seperate Drawer unitbox(as required by EIC)to be

made from 19mmplywood with 1mm outside and 0.8mm inside laminate as

approved shade for Left or Right side with wooden bidding pattionnyloncastors

handle,lock and telescopic channel. Including all materials and labour etc.

as per photo and instruction of engineer-in charge.necessary hardware fitting

as per aprroved make list.

122 Full Ht. Storage (0.46 Depth) 47.28 SQMT 10838.60 10946.99

Providing and fixing Full height storage with 19mm thick plywood board.Top,

Bottom, Sides and shutter made from 19mm thick plywood in approved shade

with vertical and horizontal surface 19mm plywood with inside 0.8mm and

outside 1mm laminate finish with 6mm thick Plywood & 0.8mm Laminated

Finished at Backside. All teakwood bidding should be finished by melamine

polish with support of S.S. legs, lock, handle, etc. complete. Including all

materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.necessary hardware fitting shall be as per aprroved make

123 Full Ht. Partition (Glass Partition with door) 76.00 SQMT 6325.00 6388.25

Providing and fixing full height glass partition with installation upto ceiling or

bottom for any room, fixing 12mm thk toughened extra clear float glass of Modi

brand partition including doors or opening and 2nos. of handels as per drawing

fixing with the wooden skeleton (plywood frame structure). Fixing properly

any air gap, Including all materials and labour etc. complete as per detail

instruction of engineer-in charge. Partition glass in Living Room/Bed

Rooms/Bathrooms-Providing & (excluding of floor spring or doorcloser)

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

124 Full Ht. Partition and low Ht. Partition (Wooden) Providing and fixing full and 23.11 SQMT 3579.20 3614.99

low height partition and glass partition with installation upto ceiling or beam

bottom as per drawing and framing the skeleton (plywood frame structure) with

19mm + 19mm thick vertical and horizontal plywood (patti) both side cover

with 6mm + 6mm for grooving as per design. Fixing properly without any air

gap and finishing with selected 1mm laminate. Before installation, make

hole/face plate for conduit pipes of electrical / networking cables with openable

stud from partition Including all materials and labour etc. complete as per detail

and instruction of engineer-in charge

125 Centre Tipoi : Size: (0.90 x 0.60 x 0.46m)Providing and fixing 12mm thick 1.00 NO 6195.00 6256.95

designer glass top supported with SS stud with 19mm thick plywood frame

(shown in detail drawing) with 1mm approved laminate finish with nylon buffers

and including all materials and labour etc. complete as per detail drawing and

instruction of engineerin

charge and consultant.

126 Corner Tipoi : Size: (0.675 x 0.675 x 0.46m)Providing and fixing 12mm thick 2.00 NO 5444.70 5499.15

designer glass top supported with SS stud with 19mm thick plywood frame

(shown in detail drawing) with 1mm approved laminate finish with nylon buffers

and including all materials and labour etc. complete as per detail drawing and

instruction of engineerin

charge and consultant.

127 GRID CEILING: Providing and fixing eco-friendly light weight calcium silicate 154.38 SQMT 1657.57 1674.15

false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the

Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity0.043° w/m KC.for the

best thermal Insulation . The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 &

Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be

laid on true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length and

size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre

to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to

form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle

of the 1200X600mm panel to form grid of size 600X600mm resting on

periphery walls/partitions on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl

128 Gypsum False Ceiling: Providing and fixing gypsum board ceiling as per 80.21 SQMT 992.25 1002.17

manufactures' specifications incl. acrylic paint. Fixing of suspended gypsum

plain false ceiling by using standard company section (GYPSTEEL ULTRA),

which includes providing and fixing G.I. parameter channels of size 20 X 28 X

30 X 0.55 mm thick having one flange of 20 mm and another flange of nylon

sleeves and screws at 610 mm center. Then suspending G.I intermediate

channels of size 15 X 45 X 15mm, 0.9 mm thick fixed with two flanges of

mm each from the sophist at 1220 mm center with ceiling angle of width

mm x 10 mm x 0.55 mm thick fixed to sophist with G.I. cleat and steel

expansion fasteners. Ceiling section of 0.55 mm. thickness having knurled web

of 51 mm. and two flanges of 26 mm each with lips of 10.5 mm. area then

fixed to the intermediate channel with the help of connecting clips and in

direction perpendicular to the intermediated channel Continuous... at 457 mm.

center 12.5 mm tapered edge gypsum board

(conforming to is 2095-1982) is then screw fixed to ceiling section with 25 mm

drywall screws at 230 mm center. Screws fixing is done mechanically either

with screwdriver or drilling machine with suitable attachment. Standard

company manufactured section (GYPSTEEL ULTRA) should be used for the

entire framework. Finally the board are to be jointed and finished, so as to

have a flush look which includes filling and finishing the tapered and square

edges of the boards with jointing compound, paper tape and two coats of

primer suitable for Gyp-board (as per recommended practices of India Gyproc -

Saint Gobain make). (also including application of primer and preparing

surface even & sand papered smooth with lapi, astar...) Including three coats

with plastic emulsion paint of approved brand & manufacture. Including all

materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.

129 Roller Blind: Providing and fixing Roller Blind curtain of water proof 26.52 SQMT 1300.00 1313.00

greenguard fabric fixed on window level on wooden batten with curtain lift of

ball chain and same color fabric heavy metal pelmet with white color & box

type look, heavy bottom rail and with Eco black-out material with necessary

hardware fitting, material and labour etc complete. design and colour as per

instruction by E.I.C. (Basic Rate Rs. 110/Sft)

130 Providing and fixing soft board panel units made from 15 mm thick soft board & 0.00 NO 1560.00 1575.60

velvet cloth (basic rate Rs.150/- per Rmt) teak wood corner, patties to all over

the Border polishing to T.W. patties, including fixing with fevicol, nail, etc.

complete in size 4' x 21'' as directed by EIC.

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

131 Providing column panelling having WOODEN grid framing of size 2' x 2' (or as 6.06 Sq Mt 3500.00 3535.00

per site situation) by Grid frame is covered with 6 mm thk flex plywood with

creating thickness of 19 mm panelling on top & bottom of column with

necessary grooves as per attached detail Drawings. Central portion of column

finished with zinc paint and decorate with bamboo sticks as per suggested

distances by architect and as per given detail drawings. All Other exposed

surfaces covered with 1 mm thk laminates in suggested area. Laminates,

plywood, shades & hardware Items shall be approved by EIC/Architect.

132 PANTRY STORAGE :Pantry below storage 600 mm Depth : Providing, making, 3.03 Sqft 1156.00 1167.56

fixing as per detail drawing made from 19 mm IS 710 BWP ply structure and

both side 1 mm th laminate finish shall be of approved make & shade and as

per the detail drawing. All the edges of ply shall be covered with Laminate finish

Rate shall also inclusive of all necessary brass satin finish nickel plated/S.S

grade hardware like Hinges,locks,6"handle , 75 mm tower bolts, ball

catches/Magnet, The rate shall be inclusive of shelf both side laminated finish

and as per detail drawer unit with SS 304 grade kitchen basket as per selction

by architect The rate shall be in sqm of elevation area for all floors and at all

heights including all costs complete as per the Architectural drawings &

instructions.Only the elevation area of the storage unit will be measured and

paid for. Item for laminate fixing and polishing is included in this item.

133 S.S.Letters: Providing, supplying & fixing Stainless steel letters 30cm height 150.00 NO 869.50 878.20

& 4.5cm wide of 304 grade with spraying matte black paint on surface etc.

complete as directed.Size of the S.S. letters shall be as described in tender

item.Coating of the S.S. letters shall be as directed by engineer in charge.

Letter shall be fixed at any height as directed by engineer in charge.

134 Providing and fixing of 900 X 600 mm size granite plate with necessary writing 1.00 NO 10000.00 10100.00

by engraving and fill up with golden colour fixing the same at site with 75 mm

wide teak wood batten Patti finished with necessary polishing etc complete as

per requirement. RATE is including for supply of temporary curtain for

inauguration function

Providing and fixing aluminum compose panel SUN BOND ALEX OR equivalent

for Exterior Facade such as walls and ceiling and projection by providing

Aluminum hollow section of approved quality and make having section size

38mm x 25mm x 1.2mm thick at maximum spacing of 600mm both direction

with necessary fittings same in line and level and foxing the frame work with 3.20 SMT

anchor fasteners. The aluminum composite panel 4,00 mm thick be fixed on the

frame work having thickness of 1.5mm as per detalls provided in drawing or as

directed by EIC. The in between Grooves between Two panels shall be filled

with colour Epoxy as directed by EIC. Necessary cutout for electrical switch

board etc., may be made as per instruction without any extra cost.

Providing & fixing letter for sub division office made from 3mm thick acrylic

sheet maximum up to 0.25 meter in height in English of approved colour

including foding with ACP sheet with all tools and tackles as directed.

Providing & fixing signage for sub division office made from 3mm thick acrylic

sheet maximum up to 0.30 meter in height in Gujarati of approved colour 30 No

including foding with ACP sheet with all tools and tackles as directed.

138 Acrylic name plate having for carrying name and designation paper of size 1ft x 350.00 353.50

139 Providing & foxing MGVCL LOGO made from 3mm thick acrylic sheet maximum 1200.00 1212.00

up to 0.65 meter in height of approved colour including foxing with ACP sheet 4 No

with all tools and tackles as directed.

Providing and fixing informatory board on foam sheet of size 12" X 4"

Providing and fixing informatory board on foam sheet of size 12" X 12"

Providing and fixing informatory board on foam sheet of size 4" X 4"

SS plate Signage:150mmX100mm-Stainless Steel satin finished flatetching plate

Providing Making and fixing of various in-doorsignage,as

&where basis.signin ISI Brushed S.S.Grade304 letters in English letter+All text

and design in acid process,etching plates.Etching text&

design with respective color coated complete plate. The SS mounted on glass

or any non holes surfaced by 3M double sided tape with required 10 Nos

chemicalprocess,guidelinesby3Mcompany.Whereas,Anyother

thenglasssurface,SSplatemountedbyTwosidescrewswithrequired

gripsndholeson the wall withtwo SS spacerscrews.Theitemshould be as per

instruction at site approved by Engineer incharge.The rate

shall be inclusive of scaffolding, drilling, adhesive material etc. at all height.

144 Medium Back Revolving Chair as ATCB item No.S-10 or HOF/Godrej make or 7686.27

equivalent as directed by EIC 9 NO

145 High Back Revolving Chair as ATCB item No.S-11 or HOF/Godrej make or 8311.96

equivalent as directed by EIC 1 NO

146 Visitor Chair Type A as ATCB item No.S-4 or HOF/Godrej make or equivalent as 3261.96

directed by EIC 9 NO

147 Three Seater Sofa having size 75'' X 30" X 30" as ATCB item No.W-45 or 24745.00

HOF/Godrej make or equivalent as directed by EIC

148 Three Seater perforated visitor bench as per ATCB item No.S-8 or HOF/Godrej 7272.00

make or equivalent as directed by EIC

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD

It. Total Rate Rate with 1% Amount

Description Unit

No Quantity (Rs.) L.C. (Rs.) (Rs.)

149 Stainless Steel Pedal Dustbin 10" X 15" inch: Providing and fixing Solimo or its 1400.87

equivalent make Stainless Steel Pedal Dustbin 10" X 15" inch , with removable

inner liner, Designed as a pedal dustbin, including fitting & fixing in position with

required accessories,

including transportation, tools tackles, fitting work and fitxures for the same etc

150 DOORMATE :Providing and Fixing Doormat made up of Coir Doormat (Plain 606.00

Welcome, Natural, 35cm X 60cm, Rectangular) as 10 NO

directed by EIC.

151 Towel Hanger: Providing and fixing Towel Hanger including fitting & fixing in 1099.89

position with required accessories, , including

transportation, tools tackles, fitting work and fitxures for the same etc complete. 4 no

Catagory : Kerovit KA680005 or Kohler / Jaquar /

reputed make having base price more than ₹800.00

152 Soap Dispensor: Providing and fixing in position Soap Dispensor of grade 1097.87

304 Stainless Steel of approved quality, make &model. work complete

including all type of accessories, as directed by EIC. (min. 800ml Dolphy 6.00 no

153 Toilet Paper Holder: Providing and fixing Toilet Paper Holder with Flap including 2203.82

fitting & fixing in position with required accessories,

, including transportation, tools tackles, fitting work and fitxures for the same 5 no

etc complete. Catagory : Kerovit KA980009 or Kohler /

Jaquar / reputed make having base price more than ₹1,750.00

154 Any item of SOR year 2024-25 of ROADS & BUILDINGS DIVISION Anand 1.00 No. 1000000.00 1010000.00

(GOG)/Approved PO/Approved rate analysis as per description of items with

Total for Schedule B1

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING & SURROUNDING

DEVELOPMENT AT TARAPUR UNDER PETLAD DIVISION.

Sr. No. Item Description Qty. Unit Rate Add 1% LC Amount Total

Schedule B2 - Electrical Work

Point wiring for Light / Bell with 2-

1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires

up to 10 mtr length , in below type of

pipe erected with 6A Modular type

switch / bell push & accessories and

earth continuity of following type,

erected on PVC / Metallic/Wooden

box, single mounting base frame

covered with textured/metallic/white

front plate modules erected on / in

wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC

pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for Tissino /

Modular secondary light point with

2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated

multi strand copper wires, in

2 below type of pipe to be erected 29 Pt. 166.00 1.66 167.66

complete with earth continuity and

necessary connection with primary

light with accessories erected on

Metal / PVC / wooden box

covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet

for open / concealed wiring. with

Point wiring for FAN with 2-1.5

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to

mtr length, in below type of pipe

erected with 6A Modular type switch

and hum free EME step type

electronic fan regulator mounted

and accessories with earth

continuity of following type erected

on PVC / Metallic/Wooden box,

single mounting base frame

textured/metallic/white front plate

modules erected on / in wall /

ceiling as per pipe erected. with

necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC

pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for Two Way Controlled

Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both

are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper

4 wires erected in below type of pipe 4 Pt. 598.00 5.98 603.98

with 6A Modular type switches and

following type of accessories erected

on PVC / Metallic/Wooden box,

single mounting base frame covered

with textured / metallic/white front

plate modules erected on / in wall /

Point wiring for Individual Plug with

& earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in

below type of pipe erected complete

with Modular type switch & 5 pin

Plug erected on PVC /

Metallic/Wooden box covered with

appropriate front plate modules

erected on / in wall / ceiling as per

pipe erected with following type of

Point wiring for Individual Plug with

& earth wire of

1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires

up to 10 mtr length, in below

type of pipe erected complete with

Modular type switch & 5 pin Plug

erected on PVC /

Metallic/Wooden box covered

6 with appropriate front plate 20 Pt. 505.00 5.05 510.05

modules erected on / in wall / ceiling

as per pipe erected with following

type of accessories. [I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby

switchboard/mcb db board (f) with

medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

Point wiring for on board Looped

Plug with 6A Modular type switch &

5 pin socket erected on PVC /

Metallic/Wooden box, single

7 mounting base frame covered with 25 Pt. 255.00 2.55 257.55

textured / metallic/white front plate

modules erected on / in wall /

ceiling with following type

accessories Cat. III

Providing & erecting Switch board

for Computer or electric apparatus

consisting of following modular

type accessories mounted with

PVC / Metallic concealed/open

box with single mounting base

frame covered with

textured/metallic /white front

8 plate,modules erected with 20 Ea 1122.00 11.22 1133.22

necessary connections as directed

1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

Providing following type of

Modular Type Accessories

mounted with PVC /

metallic/Wooden box, single

mounting base frame covered

9 with textured / metallic/white 20 Ea 159.00 1.59 160.59

front plate , modules erected

with necessary connections as per

site situation directed by Engineer In

(8) Computer RJ-45 socket Cat.III

Supplying & erecting approved make

LAN cable of following size in existing

pipe as per direction [D] CAT - 6 e

Providing following type of

Modular Type Accessories

mounted with PVC /

metallic/Wooden box, single

mounting base frame covered

with textured / metallic/white

11 front plate , modules erected 20 Ea 159.00 1.59 160.59

with necessary connections as per

site situation directed by Engineer In

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III

Supplying & erecting approved

make Telephone Cable electrolytic

copper conductor PE insulation

twisted in two pairs, & wrapped

with FRLS PVC tape & sheathed

with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring

12 & confirming to C-DOT erected in 330 Mtr. 20.00 0.20 20.20

existing pipe. of following size of

conductors & nos.of pairs.

With necessary connections.

[A] Conductor Size 0.5 mm

Providing & erecting main

Distribution (MDF) indoor

13 type, back mounted frame as per 1 Ea. 1355.00 13.55 1368.55

DoT standard approved with krone

(b) Suitable for 20 pair

providing and erecting Mains

with ISI marked, 1.5KV grade

electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to

IS 694, IEC - 227 erected in

14 existing pipe of following size 5 Mtr. 91.00 0.91 91.91

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size

of copper lugs, nuts and bolts if

(f) One wire 10.00 sq. mm

providing and erecting Mains

with ISI marked, 1.5KV grade

electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to

IS 694, IEC - 227 erected in

15 existing pipe of following size 5 Mtr. 141.00 1.41 142.41

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size

of copper lugs, nuts and bolts if

(g) One wire 16.00 sq. mm

providing and erecting Mains

with ISI marked, 1.5KV grade

electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to

IS 694, IEC - 227 erected in

16 existing pipe of following size 5 Mtr. 234.00 2.34 236.34

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size

of copper lugs, nuts and bolts if

(h) One wire 25.00 sq. mm

providing and erecting Mains

with ISI marked, 1.5KV grade

electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to

IS 694, IEC - 227 erected in

17 existing pipe of following size 5 Mtr. 298.00 2.98 300.98

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size

of copper lugs, nuts and bolts if

(i) One wire 35.00 sq. mm

Providing and erecting Mains with

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type

of pipe to be erected concealed

in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS

18 PVC insulated stranded wire of green 200 Mtr. 62.00 0.62 62.62

colour for earth continuity of

following size.

(A) With medium class Rigid

PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type

of pipe to be erected concealed

in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green

colour for earth continuity of

following size.

providing and erecting Mains with

1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor

wire in following type of pipe to be

erected in / on wall / ceiling with

20 sq. mm copper conductor FRLS PVC 50 Mtr. 111.00 1.11 112.11

insulated stranded wire of green

colour for earth continuity of

(A) with medium class Rigid PVC

pipe and accessories (a) 2 wire

Providing and erecting ISI mark

Medium class RIGID PVC PIPES of

following size complete to be erected

21 on/in wall or ceiling erected with 650 Mtr. 33.00 0.33 33.33

necessary PVC fittings & Junction

boxes fixed with adhesive solution

& Clamps with following dia of

Providing & erecting PVC

Corrugated Flexible Conduit with

required nos. of coupling, PVC

bushes, Check-nuts etc. complete

Providing and erecting Sheet

Steel powder coated MCB

distribution board - flush / surface

mounted fitted with busbar,

neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB

to house appropriate nos. of

MCBs.(The DBs should be used of

23 same company of MCB to be 1 Ea 3836.00 38.36 3874.36

(B)three phase incoming and single

phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door (IP-43)

providing and erecting Miniature

circuit breaker single pole 6A to

24 25A suitable to operate on 30 Ea 111.00 1.11 112.11

240 V A.C. system and having

breaking capacity 10 KA to be

Providing & erecting 240 V MCB

double pole switch for lighting Load

(B Curve) having 10 KA breaking

25 capacity & confirms to IS : 8828 3 Ea. 276.00 2.76 278.76

in existing box having following

(A) 6 to 32 Amp. Cat-III

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

26 Curve) having 10KA breaking 1 Ea. 730.00 7.30 737.30

capacity & confirms to IS :8828 in

existing box having following

capacity and erecting Approved

make RCCBs conforming to IS:

12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on single phase

27 V,50Hz. having characteristic of 3 Ea 2628.00 26.28 2654.28

quick action & tripping with all

advance feature & do not

incorporate any electronic

component. for following Max. rating

erected as directed

(iii) 63 Amps. DP Cat. III

Supplying and erecting triple pole &

neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos.

of electrolyte bus having current

density not more than 1.6 Amp. /

sq.mm (Rated current / cross section

area) duly wrapped with colour

28 insulating tape for phase sequence of 2 Ea 1942.00 19.42 1961.42

following current carrying capacity,

erected with necessary bus bar

supports /insulators, main cable

socket to each bar, erected in

existing cubical panel with necessary

connections. (A) Suitable for

Providing and erecting Approved

make Four pole moulded case circuit

breaker having breaking capacity ICU

of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A.

with Fixed thermal & magnetic

29 release suitable to work on A.C. 5 Ea 6112.00 61.12 6173.12

supply 50 c/s. with all internal

connections, spreader tinned copper

& complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Providing & erecting weather

proof, dust & vermin proof,

floor mounted front operated

indoor type cubical panel board

necessary IP- 42 and above

protection as per approval from

engineer incharge made from

SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG

thick CRC M.S.sheet for

internal partitions with

necessary accesories

30 supporting angles/ flats channel 2 Ea 14755.00 147.55 14902.55

including cutting, bending, drilling,

welding, riveting with internal

partitions & cable alley as

per requirements & instruction

of engineer-in- charge with erection

of supplied switch gears,

BUSBARS, suitable size of inter

connecting PVC copper wire /

copper-aluminium strips, rubber

grommets, rib, bakelite control

fuses/MCB for measuring

instruments, earth bus & earth bolts,

Providing , erecting , fabricating

the M.S. structure as per

requirement on site

incorporating proper size

of M.S. angles,square,round,

flats, bars, channels, sections

complete with cutting, welding,

31 grinding & finishing duly painted 30 Kg. 77.00 0.77 77.77

with one coat of red oxide with

erection on site as per direction

of engineer in charge with

necessary grouting, cementing,

plastering & finishing

Providing and erecting

multifunctional meter suitable for

application of Power monitoring and

showing measurement of following

Voltage, Frequency, Apparent

energy, Apparent power, Active and

reactive energy, Active and reactive

power, Average voltage Vavg, Peak

demand power PM, QM, SM,

Demand power P, Q, S, Apparent

power S, S1, S2, S3, Unbalance

current, Power factor and

32 displacement PF (signed, four 1 Ea 13984.00 139.84 14123.84

quadrant), Calculated neutral

current, Active, reactive, apparent

energy (signed, four quadrant),

Active power P, P1, P2, P3, Voltage

U21, U32, U13, V1, V2, V3, Phase

currents, Average current Iag, Peak

demand currents, Reactive power Q,

Q1, Q2, Q3, Demand current I1, I2,

I3, [Us] rated supply voltage 40...300

Network frequency 50 Hz, Type of

network 3P, Display type 7 segments

Supplying and erecting approved

make suitable panel indicator LED

33 type lamp, lens cover, complete 6 Ea 43.00 0.43 43.43

erected with necessary connections.

Providing & erecting L.T. Current

Transformer with bar primary 50/5

to 1000/5 ratio 15 VA burden

34 erected in existing CRCA box 1 Ea. 272.00 2.72 274.72

duly secured with insulating

materials connected to the meter.

Providing and erecting metallic

vitrified danger notice board as per

35 language suggested by engineer 1 Ea 69.00 0.69 69.69

incharge for MEDIUM VOLTAGE

installation to be erected as per IS-

Providing following type of Modular

Type Accessories mounted with PVC

/ metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

36 modules erected with necessary 10 Ea 25.00 0.25 25.25

connections as per site situation

directed by Engineer In charge.

(7) Blank Plate Single

Providing and erecting Approved

make Earth fault Relay suitable

to mount with inter connection

suitable to following size of

moulded case circuit breaker having

37 CT ratio & MCCB rating as following 1 Ea. 4641.00 46.41 4687.41

along with shunt trip 220V AC.

with all internal connections &

complete erected in existing

Supplying and erecting,

commissioning and testing diesel

generating set having continuous

rating, 3 phase, 415 volts, 50 cycles

A.C. supply comprising of a totally 0 Ea.

enclosed air/water cooled diesel

engine with multi-cylinders

developing suitable BHP not less than

following capacity at 1500 RPM with

10% overload for one hour in

hours with standard accessories like

fly wheel, lubricating oil cooler, "A"

class governor, heavy duty fuel wheel

and lubricating oil filter, oil bath air

filler, lubricating oil pressure gauge, 0

end exhaust manifold, standard set

of tools with adjustable spanners,

screw drivers, feeder gauge, cylinder

head to cover, joint cylinder head to

exhaust, element lube oil filter,

12/24 volts electric starting

equipment complete with standard

battery, dynamo, cut-outs, ammeter,

necessary wiring, pressure gauge,

starter etc and heavy duty 0

Residential type exhaust silencer and

vertical hot air duct both logged with

asbestos rope, save oil trays, exhaust

piping of required length, standard

wall/floor mounted fuel with level

indicator and piping and drip proof

alternator, self excited, self

regulated, screen protected, with

excitation system, capable of

delivering the rated system output at 0

415 volts, 3 phase, 0.8 PF, 50 Hz,

wire, running at 1500 RPM,

conforming to IS-4722- 1968 with

voltage regulation +/- 5% of rated

voltage from no load to full load.

Both the engine and alternator fitted

on a common fabricated steel base

plate with antivibration mounting

engine and alternator both

connected to each other by flexible

flange coupling and with floor/wall

mounted control panel box

comprising of voltmeter ammeter,

delivering the rated system output at

415 volts, 3 phase, 0.8 PF, 50 Hz,

wire, running at 1500 RPM,

conforming to IS-4722- 1968 with

voltage regulation +/- 5% of rated

voltage from no load to full load.

Both the engine and alternator fitted

on a common fabricated steel base

plate with antivibration mounting

engine and alternator both 0

connected to each other by flexible

flange coupling and with floor/wall

mounted control panel box

comprising of voltmeter ammeter,

Providing & erecting approved

make AMF control panel suitable

for following size of 3 phase,

V., 50 cycles, A.C. diesel

generating set complete of scope 1 Ea.

as detailed below:

1) Power module: A

pair of electromechanically

interlocked contactors (for mains

& generator) Overload relay

for generator contactor Neutral

contactor for mains and generator

39 Power socket for connections. 0 0.00 96357.00 963.57 97320.57

2) Control and metering module: Line

voltage monitor. Generator voltage

monitor Ammeter 3 items attempt

start facility. Air circuit

breakers/MCB/MCCB of suitable

rating for auto/manual operation.

Auto/manual switch. Emergency

stop push buttons. Manual start 0

push button. frequency meter.

Engine hour meter. Two earthing

3) Protection module: The engine

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

40 conductor for 1.1 KV. to be laid on 40 Mtr. 87.00 0.87 87.87

wall with necessary clamps or in

existing trench / pipe of following

size of cables.

(B) 3 core 4 Sq. mm

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

41 conductor for 1.1 KV. to be laid on 50 Mtr. 106.00 1.06 107.06

wall with necessary clamps or in

existing trench / pipe of following

size of cables.

(C) 3 core 6 Sq. mm

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

conductor for 1.1 KV. to be laid on

42 wall with necessary clamps or in 200 Mtr. 218.00 2.18 220.18

existing trench / pipe of following

(B) 3 1/2 core 35 Sq. mm ( 16 Sq.

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid

43 on wall with necessary clamps or in 50 Mtr. 125.00 1.25 126.25

existing trench / pipe of following

(B) 4 core 6 Sq. mm

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium

conductor for 1.1 KV. to be laid

44 on wall with necessary clamps or in 100 Mtr. 152.00 1.52 153.52

existing trench / pipe of following

(A) 4 core 16 Sq. mm

Providing and, fixing heavy duty

flange type brass cable gland with

rubber ring for PVC insulated

45 armoured cable complete with out 2 Ea 33.00 0.33 33.33

going tails, insulating tape etc for

following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty

flange type brass cable gland with

rubber ring for PVC insulated

46 armoured cable complete with out 4 Ea 38.00 0.38 38.38

going tails, insulating tape etc for

following size of cables.

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty

flange type brass cable gland with

47 rubber ring for PVC insulated 4 Ea 47.00 0.47 47.47

armoured cable complete with out

going tails, insulating tape etc for

Providing size of cables.

and, fixing heavy duty

flange type brass double

48 compression type cable gland with 4 Ea 75.00 0.75 75.75

rubber ring for PVC insulated

armoured cable complete with out

Soldertails, less

insulating tape etc fortype

Aluminium lugs conforming to IS

suitable for cable of following size

evenly crimped with high pressure

49 tool & connected to switchgear 20 Ea. 6.00 0.06 6.06

terminals with brass/cadmium

plated nut bolts in an approved

Solder less crimping type

Aluminium lugs conforming to IS

suitable for cable of following size

evenly crimped with high pressure

50 tool & connected to switchgear 16 Ea. 15.00 0.15 15.15

terminals with brass/cadmium

plated nut bolts in an approved

Solder less crimping type

Aluminium lugs conforming to IS

suitable for cable of following size

51 evenly crimped with high pressure 16 Ea. 20.00 0.20 20.20

tool & connected to switchgear

terminals with brass/cadmium

plated nut bolts

Supplying in an approved

& erecting earth pit of

minimum bore dia.150mm size

approved make Earthing

Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987

made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron

galvanising, Inner pipe dia of

mm having 200-250 Micron

galvanising, connection terminal

dia of 12mm with constant ohmic

52 value surrounded by highly 6 Ea 8551.00 85.51 8636.51

conductive compound with

high charge dissipation suitable

for following type of

applications with chamber and

heavy duty cover. (A)(approved

make OEM has to submit test

certificate including value of

earth resistance of installation

duly stamped and signed by

agency and officer Incharge has to

ensure the value of earthing

resistane mentioned in test

Providing and erecting required

size Copper strip for earthing

Transformer, LT panel board, Motors

etc. using copper clamp.

Providing and erecting required size

HOT deep Galvanised iron strip for

54 earthing of H.T. , OCB/ ACB/ 20 Kg. 77.00 0.77 77.77

Transformer LT panel board, Motors

etc. using proper clamp.

Providing and erecting Annealed

55 bare Copper 10 Kg. 787.00 7.87 794.87

wire 8 to 16 SWG.

Providing & erecting Approved

make Power Saving 50 Watt

Ceiling Fan with double ball

bearing ISI mark with Condenser

volt A.C. 50 Hz 1200 mm sweep

56 complete having 3blades with 16 Ea 1929.00 19.29 1948.29

aluminium blades with , canopy &

cm. down rod erected with

earthing.(Make shall be approved by

Engineer in charge))

Supplying and erecting 19 /

mm. nominal bore Medium Class

57 M.S. Pipe down rod erected 16 Mtr. 107.00 1.07 108.07

duly painted for fan complete

with proper insulation without

leakage and earthing.

Supplying & erecting fan hook box

M.S. round bar bounded to the RCC

bars up to 50mm length each side

and pierced through a

16 Gauge M.S. box / Heavy Duty

PVC box complete

Providing erected

2.5mm.thick laminated

to cover the fan hook or Fan box.

Supplying & erecting approved make

low noise decorative exhaust fan

60 having square frame ABS body with 5 Ea 1687.00 16.87 1703.87

inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

Providing recess in wall or

window frame suitable for

erection of Exhaust fan complete

with plastering and colour washing to

match the colour of the wall or

window complete with expanded

Supplying and toerecting

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used as

a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/ aluminium die cast

powder coated and high U.V. &

corrosion resistance with diffuser

with company mark/name 160V to

270V, Power Factor more than 0.95,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet

Supplying and erecting led lamps

with following wattage capacity of

220 to 240 voltage, minimum

burning hours life, 500 V in built-

surge protection,Polycarbonate

63 diffuser, mounting suitable for E14 / 10 Ea 111.00 1.11 112.11

E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder

(ii) 5 to 8 watts cat - III

Supplying and erecting LED indoor

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used as

a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

64 housed in aluminium casted body 32 Ea 584.00 5.84 589.84

with company mark/name

160V to 270V,Power Factor more

than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage

Supplying LEDerecting

fittings.The Engineer

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used as

a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more

than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

Providing & erecting open well

horizontal mono block pump set

with cast iron body, complete for

three phase submersible motor

66 [C] For 3 HP 3 phase open well 1 Ea. 15552.00 155.52 15707.52

horizontal mono block pump set

suitable for 85 LPM to 270 LPM @

11 mtr to 33 mtr head suitable for

50/65 mm dia delivery pipe

Supplying & erecting approved make

Automatic liquid level controller 6A.

67 with sensor testing as per instruction 1 Ea. 2332.00 23.32 2355.32

of Engineer in charge on site

complete with wiring connection

with existing wires , with copper

Supplying & erecting approved

make motor control cubical panel

[Star delta] made from 16G CRCA

sheet duly epoxy powder painted

inside and outside with hinged

doors and locking with suitable size

of ON - OFF isolator (AC 3 /

duty) main fuses. Digital volt and

current meter (in a single unit)

with micro controller based

control unit and current sensing

single phasing preventer

68 electronic overload protection, 1 Ea. 7179.00 71.79 7250.79

over voltage (Programmable)

protection and under voltage

(Programmable) protection, prod

less dry run protection

programming facility for setting of all

parameter like overload current,

high voltage limit, low voltage limit,

dry run limit with digital indication

on seven segment LED display for

any fault like over load, high

voltage, low voltage, dry running

single crimped, electronic star delta

Supplying and erecting approved

make Conical Pole (Standard ) Made

from HR sheet steel. The pole should

be made as per IS. and shall be

coated with hot dip galvanizing as

per IS 2629/2633/4759 with required

69 base plate and integral Junction box 5 Ea. 6340.00 63.40 6403.40

consist of terminal plate of min 6mm

Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and

arrangement for cable terminationas

erected on suitable foundation

(included) with necessary GI nut-

Providing and erecting street light

pole bracket comprising main B

Class MS pipe of 4.2 cm/require

outside dia. complete with suitable

B Class M.S. sleeve tubing of

approx. 45cms.length and suitable

for 76.5 mm / 80mm. / require

size pole top having sufficient

fasteners for fixing the brackets

and having spread of 1 mtr. length

with suitable rise as per site

condition & suitable welded

stiffener reducer and nipple with

check nut complete painted with

one coat of Red oxide / PU base

primer and two coats of Aluminium

/ PU paint. paint with following nos

[A] Single Arm bracket 1 Mtr

Supplying & erecting approved

make SMC press moulded

composite FRP. loop-in, loop- out

approx. 2mm thick box complete

with Bakelite connector strip

5way(3P+N+E),DIN rail for

mounting mob & hinged doors

as per requirement having locking

71 arrangements with mounting clamp 5 Ea 890.00 8.90 898.90

with nuts, bolts & washers

suitable for erection on pole

with cable clamps& earth bolt of

following size of box.

Supplying and erecting LED street

light / Flood light fittings with

High power White LEDs wattage

of 3 Watt and above assembled

on single MCPCB, efficiency more

than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

72 mark/name engraved or embossed 5 Ea 3312.00 33.12 3345.12

160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy>

lumens/watt . LED driver

efficiency > 85 %.( fittings required

certificates)(NOTE: Below

description have shown ranges

of Wattage capacity of LED

fittings.The Engineer incharge may

Providing and fixing Terminal board

of size 5.0 x 127 x

mm.bakelite sheet with suitable

73 brass studs with nuts, washers 5 Ea. 145.00 1.45 146.45

and clamps of size 25mm x 3mm

suitable for pole painted with one

coat of red lead paint.

Supplying and erecting Flexible PVC

insulated multi strand multi core

1.1 kv grade ISI marked copper

74 wires of following size to be erected 525 Mtr. 46.00 0.46 46.46

(e) 1.50 Sq.mm 3 core round PVC

Supplying and erecting B class

Galvanized iron pipe having smooth

finished bore of the pipe on both

ends erected nuts and bolts along

75 the pole / wall shaping the pipe 20 Rmt 247.00 2.47 249.47

as per site requirement. Pipe dia as

Providing and erecting Pipe type

earthing with 40 mm dia 2.5 mtr

long 'B' grade G.I. pipe with

necessary coupling buch buried in

specially prepared earth pit & G.I.

76 earth wire of 8 SWG erected & 5 Ea. 985.00 9.85 994.85

connected as directed (For panel)

For using salt and charcoal / coke

for pipe type earthing.

Providing & laying approved

make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS

14930 II )with necessary connecting

77 accessories of same material at 20 Rmt 62.00 0.62 62.62

required depth in existing trench for

laying of cable. below ground /

road surface for enclosing cable

(A)50 mm outer dia

Providing & erecting 240 V MCB

double pole switch for lighting Load

(B Curve) having 10 KA breaking

78 capacity & confirms to IS : 8828 5 Ea. 276.00 2.76 278.76

in existing box having following

(A) 6 to 32 Amp. Cat-III

Making trench in Hard Murrum /

Tar Road of suitable width of

cm or required depth for laying

79 any size of cable or locating the fault 60 Mtr. 74.00 0.74 74.74

all over the run and back filling

the same and making the surface as

Making trench in soft soil of suitable

width of 90 cm deep for laying

80 cable or locating the fault all over 80 Mtr. 55.00 0.55 55.55

the run and back filling the same

and making the surface as normal

Providing and erecting Inverter

based approved make split air-

conditioning unit consisting of

condensing unit with variable speed

fan motor, inverter type hermetically

sealed rotary compressor with 0

accessories etc. duly connected

separately erected evaporating unit

and blower motor with its

accessories by means of extra

supplied proper insulated copper

tubing,drain PVC pipes suitable for (

81 (B) for 1.5 ton capacity- Premium Cat. 0 Ea. 54643.00 546.43 55189.43

82 (C) for 1.7 to 2 ton capacity-Premium Cat.

Schedule B2- Electrical Work TOTAL INR

NAME OF WORK: CONSTRUCTION OF TARAPUR SUB DIVISION OFFICE BUILDING &

SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD DIVISION.

Item description Qty. Unit Rate (Rs.) Amount (Rs.)

Schedule B3 – Fire Safety

1 Fire Extinguishers as per IS-2190

Supplying & installation of “ISI MARKED” Carbon

a. Dioxide (CO2) type fire extinguisher as per IS- 2 No. 5186

15683 with wall hanging accessories

Capacity: 4.5 Kg.

Supplying & installation of “ISI MARKED” ABC-

b. 50% MAP powder type fire extinguisher as per IS- 4 No. 2540

15683 with wall hanging accessories

Capacity: 6 Kg. with minimum 3A rating

Supplying & installation of “ISI MARKED” ABC-

c. 50% MAP powder type fire extinguisher as per IS- 2 No. 1246

15683 with wall hanging accessories

Capacity: 1 Kg.

2 First-Aid Hose Reel as per IS-3844

Supply, installation, testing and commissioning

of First Aid hose reel with MS construction,

conforming to IS 884 with up-to-date

amendments, complete with

the following as required.

1) 30 m. long 25 mm (nominal internal) dia.

a. water hose thermoplastic (Synthetic reinforced) 2 No. 8627

type-2 as per IS:

2) 25 mm (nominal internal) dia. brass metal

globe valve & 8mm nozzle.

3) Drum and brackets for fixing the equipment

4) Connections from riser with stop valve (gun

metal) & M.S. pipe.

3 Down comer as per IS-3844

Providing, fixing, testing and commissioning of

G.I. "heavy" class heavy duty pipes as per IS:

a. (up to 150 mm dia.) including cutting, screwing,

welding etc. and providing all fittings like flanges,

bends, tees, elbows, reducers, clamps, hangers

anchor fasteners etc.

Providing, fixing, testing and commissioning of

b. gun metal air release valve with control valve &

connection to riser.

Providing, fixing, testing and commissioning of SS

single headed ISI marked oblique pattern hydrant

c. landing valves as per IS: 5290 with 80 mm Dia. 2 No. 6877

flanged inlet & 63 mm Dia. female outlet

complete with cap.

d. Providing, fixing, testing and commissioning of 63 4 No. 6100

mm Dia. 15 m long hose pipe with 63 mm dia.

Male and Female SS couplings duly binded with GI

wire, rivets etc. conforming to IS 636 (type-B) as

Providing, fixing, testing and commissioning of

e. Standard SS TP branch pipe as per IS:903 suitable 2 No. 3917

to fit with standard instantaneous type 63 mm

Providing, fixing, testing and commissioning of

Weather proof standard fire hose cabinet stand

mounting type (750 mm x 600 mm x 250 mm

f. deep) having single or double opening with M.S. 2 No. 4002

Fabricated Stand, necessary locking arrangement

by Allan key suitable for housing 2 nos. hose pipe,

1no. Branch pipe & nozzle

Supply and fixing 2 way fire brigade connection of

cast iron body with 2 Nos Stainless steel metal

g. Male instantaneous inlet couplings complete with 1 No. 6830

cap and chain as required for 100mm dia. pipe

connection, conforming to IS 904 as required.

h. Structural steel for support 60 Kg. 147

j Core Cutting Holes for RCC Roof with packing 3 No. 1867

4 MOEFA or Fire Detection and Alarm System as per IS-2189

a. SITC of 08 zone automatic conventional type fire

detection & alarm system with inbuilt battery

charger and 16*2 characters LCD display complies

with UL 864 & NFPA-72 standard approval UL 1 No. 25500

b. SITC of conventional type UL listed multi criteria

type (heat +smoke detector) with base 22 No. 2200

c. SITC of manual call point conventional type PVC

housing. 4 No. 2000

d. SITC of sounder cum strobe with mounting base

fire alarm panel. 2 No. 2500

e. SITC of standby battery set 24 V DC for main fire

alarm panel. 1 Set 3500

f. SITC of junction box with all accessories for

mounting of Detector, manual call point & 8 No. 1050

sounder on ceiling/wail surface.

g. Supply installation of 2 core X 1.5 sq.mm multi

stand copper FRLS armored cable, RED laid on

surface with GI saddle spacers and accessories for 200 Mtr. 130

fire alarm system.

h. Supply installation of PVC conduit pipe 25MM

5 Terrace Tank as per IS-3844

a. Supply & Installation of fire Water Tank 1 No. 114000

(5000LtrX2 or 10000LtrX1)

b. Water Tank Outlet Connection 100 mm dia. 1 No. 16633

Charges with interconnection.

Replenishment arrangement for fire Water Tank

(considered 25 mm dia. UPVC pipe of length

c. mtrs. with 2 ball valve). This includes excavation 1 No. 27333

work and laying of pipes with all required

Auto tank refilling system with cabling up to

mtrs & repeater panel at ground floor with

additional arrangement of water level indicator

6 Fire Pump at Terrace as per IS-3844

Providing, fixing, testing and commissioning of CI

Butterfly valve (PN 1.6) with integrally molded

a. linear of nitrile or EPDM. Stainless steel Disc &

Steam Lever operated with ISI Marked as

Providing, fixing, testing and commissioning of

b. dual plate non return valve of following sizes

conforming to API: 594 complete with rubber

gasket, GI bolts, nuts, washers etc. as required.

Providing, Installation, Testing, and

c. commissioning of Terrace Booster Pump of 450 1 No. 72166

LPM at 40 Mtr. head Booster Pump (7.5 HP) with

M15 foundation of minimum 50 mm thickness.

Providing, Installation, Testing, and

commissioning of Wall mounted Auto Control

Panel with MCB, Connector, Timer, Push Button,

overload relay, phase indicator etc. indicating

hooter suitable for booster pump (Considered up

to 100 Mtrs. cables)

Supplying & Fixing of Cabling and Cable

e. Tray/conduit within Pump house from Control 1 No. 10000

Panel to drives and Instrumentation.

f. Providing and fixing dial type Pressure Switch 1 No. 3429

Providing, fixing, testing and commissioning of

g. Pressure Gauge having 100 mm dial& range of 0- 1 No. 2890

15 Kg/cm2 with syphon isolation valve.

Supply, installation, testing and commissioning of

h. lever operated brass Ball Valves screwed end 3 No. 1108

Supply, installation, testing and commissioning of

j Y type Strainer CI body including a set of suitable

flanges, bolts, nuts, washers’ neoprene rubber

gaskets etc. complete.

k Fiber/MS Pump Housing to protect pump motor 1 No. 8950

7 Emergency Signage as per IS-12349

a. Auto glow directional Fire Exit Signage (125 X

250)mm conform to IS:12349. Fluorescence shall

start within 10ns after switching off the light. The

sizes and colour shall be in accordance with IS:9457-

(Rupees Eight Lac Ninety Three Thousand Two Hundred and Eleven only with GST)

● GST at applicable rate will be reimbursed in actual to the contractor only after submission of

sufficient proof of such payment made to the Govt. For claiming refund of GST agency has to

submit invoice in the format as prescribed by the Act.

● GST at the applicable rate will be levied on the total Schedule – “B”. GST will be subject CGST,

SGST, UTGST, IGST act and rules, regulation and notifications issued by Government / MGVCL

from time to time. Contractor has to classify the supply / service according to the GSN / SAC of

CGST Act, 2017. MGVCL also reserve the right of classification in case of any misclassification of

goods / services. Contractor has to provide invoice in standard format as per CGST act and GST

invoicing rules. GST will be reimbursed subject matching of transaction in GST return. In case of

mismatch, amount of GST will be retained from the subsequent invoice of the contractor. For final

bills, GST will be retained and reimbursed on matching the same in GST return and after receipt

of request from the contractor.

● Labour welfare cess will be deducted from RA & Final bills considering new construction work

as per latest prevailing law.

● The material shall be got tested from Government recognized laboratory i.e.(R & B) or field

laboratory of GERI (R&B) or any Government approved laboratory, for which 1% of the executed

amount to tender shall be recovered from the contractor from the RA Bill & Final Bill. Contractor

should pay testing charges in advance as instructed by EIC (Engineer in charge) and same shall

be adjusted in the recovery amount on production of proof of Original Bills paid to concerned

laboratory. However, if the charges increase over 1% order amount, no excess recovery shall be

made from the contractor and such amount paid by the company directly to testing laboratory.

● Security Deposit shall be released on successful completion of one year from actual date of

completion or finalization of final bill whichever is later. For special items like waterproofing, anti-

termite treatment separate amount shall be deposited as per item.

For & On Behalf of MGVCL

Chief Engineer ( Projects )

Corporate Office

● I/We am/are willing to carry out the work at rate quoted by me in website

www.tender.nprocure.com for the tender ID NO: 247979 related to the work of “ CONSTRUCTION

OF TARAPUR SUB DIVISION OFFICE BUILDING &

SURROUNDING DEVELOPMENT AT TARAPUR UNDER PETLAD DIVISION.”

● I/We hereby accept all the conditions and specifications of this tender document, and

● I/We have read & clearly understood the terms, conditions, and Schedule-B & Technical

specifications put by MGVCL on web-site.

Seal & Signature of Contractor.