Desilting of various drains

Supply delivery and installation of Trommel(16-40mm ) with following specifications like having trommel screening aperture-40mm perforation size with processing capacity 30-60TPH (suits 50 TPD MSW lines) , trommel drum dia -2-2.5m, trommel length of 4-6 m,made of mild steel/stainless steel(MS+SS GRADE) ,Drive power of 22-25kw(approx) and power source of 3-phase electrical drive (440V), including GST

Supply delivery and installation of windrow turner with following specifications such as self-propelled or tractor mounted with a capacity of 1500-2500m3/hr, turning width of 3.5-5.0 m,turning height of 1.5-2.2 m,engine power of 100-200 HP(diesel), chasis/build material of mild steel or heavy duty structural frame with crawler or wheel drive mobility,manual or hydraulic control system, Warranty 1 Year standard including GST.

Supply delivery and installation of Air blower with following specifications such as having capacity-1500cfm and with working temparature -30 and pressure-750mm VC and drive-direct foot mounted fan recomended motor power with 11kw or 15hp ,3phase,4pole, copper winding, confirming to IS 12615.:2011 blower RPM-2900,MOC of casing-3mm MS Fabricated moc impeller MS Fabricated balancing as per IS1940,Grade 6.3 Standard accessories Set of both ends companion matching flanges, Duly painted with epoxy primer and synthetic paint / HR paint.Power Supply 440 V, 50 Hz Electric Motor Standard IE2 rating ABB or BBL or CG make or equivalent with Installation & demonstration, including GST

Supply delivery and installation of single shaft shredder for municipal solid waste containing various objecrts such as bottles, plastic waste thrash waste, organic waste etc. and having capacity of shreder taking 8hrs per day operation in tonnes is 10 with type of drive for shredder is electrical and type of rotary shaft is cylindrical and solid router with blades fitted and input electric supply three phase 440v.50hz and motor power for main drive in hp @1440rpm -7.5hp and motor power for pusher drive in hp,1440 rpm is 1 motor class IE2 type of control panel with manual based warranty with free spare parts and free service on machine is 1 number of preventive maintainence visits during warranty number per annum-2 tool kit for repair and maintainence to be supplied-No,gear box for speed reduction yes availability of door open cut off switch-no, material of housing enclosure -mild steel and material of rotary shaft-mild steel,type of conveyor in TPD taking 8hrs duty per day-6-10hrs, width of belt for slider bed type/tough conveyor in mm with tolerence =- 10mm-600 diameter of driving pulley for slider bed type/trough conveyor in mm with tolerance +-10mm-220 diameter of driven pulley for slider bed type/trough conveyor in mm with tolerance +-5mm -230 type of screw conveyor-horizontal type screw conveyor with Installation & demonstration,including GST

Supply delivery and installation of Sorting conveyor belt (required length as per site condition)

Conveyor Belts1 (Feeding waste to Trommel): Type:Flat roller type belt conveyorMotor:2.25kW(3HP),1440RPM,TEFC(Totally Enclosed Fan Cooled) copper wire conforming to IS:13730,3-phase,4-poleInclination:0°Length of Conveyor:Approx.3m from End to End of conveyorSize of belt:800mm wide (working width 800mm)Belt Specification:Plain rubber belt, 3ply, 3mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08mm, nylon cord conforming to M24 gradeDrive pulley for conveyor:∅320mm OD with crowning surface with 65mm shaft with Rubber coating and hearing bone designRear pulley for conveyor:∅320mm OD with crowning surface with 65mm shaft With rubber coating and hearing bone design

Conveyor Belts 3 (Line below trommel for fraction<250mm : Type:Flat roller type belt conveyorMotor:2.25kW(3HP), 1440RPM, TEFC(TotallyEnclosed Fan Cooled) copper wire conforming to IS:13730, 3-phase, 4-poleInclination:0°Length of Conveyor:Approx. 3.3m from End to End of conveyorSize of belt:800mm wide (working width 600mm)Belt Specification:Plain rubber belt, 3ply, 3mm top, 1.5mm bottom rubber covering, total plain belt thickness 08mm, nylon cord conforming to M24 gradeDrive pulley for conveyor:∅320mm OD with crowning surface with 65mm shaft With rubber coating and hearing bone designRear pulley for conveyor:∅320mm OD with crowning surface with 65mm shaftWith rubber coating and hearing bone design

Conveyor Belts 4 (Line below trommel for fraction > 250mm) : Type:Flat roller type belt conveyorMotor:2.25 kW (3HP), 1440RPM, TEFC(Totally Enclosed Fan Cooled) Copper wire conforming to IS:13730, 3-phase, 4-poleInclination:0°Length of Conveyor:Approx.4.6m from End to End of conveyorSize of belt:1000mm wide (working width 600mm)Belt Specification:Plain rubber belt, 3ply, 3mm top,1.5mm Bottom rubber covering, total plain belt thickness 08mm, nylon cord conforming to M24 gradeDrive pulley for conveyor:∅320mm OD with crowning surface with 65mm shaft With rubber coating and hearing bone designRear pulley for conveyor:∅320mm OD with crowning surface with 65mm shaft With rubber coating and hearing bone design

ConveyorBelts5(Feeder line for fraction > 250mm) Type:Flat roller type belt conveyorMotor:2.25kW (3HP), 1440 RPM, TEFC(Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4-poleInclination:0°Length of Conveyor:Approx. 3.25m from End to End of conveyorSize of belt:1000mm wide (working width 800mm)Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belts 6 (Sorting line for light fraction > 250 mm): Type :Flat roller type belt conveyorMotor :3.75 kW (5 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4- poleInclination :0°Length of Conveyor :Approx. 6.0m from End to End of ConveyorSize of belt :1000 mm wide ( working width 800 mm Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belt 7 (Feeder lines for heavy fractions > 250 mm) : Type : Flat roller type belt conveyorMotor :2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4-poleInclination :0°Length of Conveyor :Approx. 4.25 m from End to End of ConveyorSize of belt:1000 mm wide ( working width 800 mm)Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belt 8 (Sorting line for heavier fraction) : Type :Flat roller type belt conveyorMotor :3.75 kW (5 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4-poleInclination :0°Length of Conveyor :Approx. 7m from End to End of ConveyorSize of belt :1000 mm wide ( working width 800 mm)Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belt 9 (Line for heavier fraction < 250 mm) Type :Flat roller type belt conveyorMotor :2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4-poleInclination :0°Length of Conveyor :Approx. 4.25 m from End to End of ConveyorSize of belt :1000 mm wide ( working width 800 mm)Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belt 10 (Line for line for fraction < 250 mm) : Type :Flat roller type belt conveyorMotor :2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4-poleInclination :15° Length of Conveyor :Approx. 1.75 m from End to End of ConveyorSize of belt :1000 mm wide ( working width 600 mm)Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 10 mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belt 11 (Line for lighter fraction < 250 mm) Type :Flat roller type belt conveyorMotor :3.75 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4-poleInclination :0°Length of Conveyor :Approx. 6m from End to End of ConveyorSize of belt :1000 mm wide ( working width 800 mm)Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belt 12 (Line for fraction < 60 mm) Type :Flat roller type belt conveyorMotor : 3.75 kW (5 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4-poleInclination :15° Length of Conveyor :Approx. 6.5m from End to End of ConveyorSize of belt :1000 mm wide ( working width 800 mm)Belt Specification :Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 10mm, nylon cord conforming to M 24 gradeDrive pulley for conveyor :∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone designRear pulley for conveyor: ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Conveyor Belts 13 (Line for heavy fraction < 60 mm) Type : Flat roller type belt conveyor, Motor : 2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS : 13730, 3- phase, 4-pole, Inclination : Upto 15° inclined, Length of Conveyor : Approx. 3.5 m from End to End of conveyor, Size of belt :1000 mm wide ( working width 800 mm)Belt Specification : Chevron rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total chevron belt thickness 10 mm, nylon cord conforming to M 24 grade, Drive pulley for conveyor : ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design, Rear pulley for conveyor : ∅ 320 mm OD with crowning surface with 65 mm shaft with rubber coating and hearing bone design

Other details (Common for above conveyor belts from 1 to 13 Side Guard :2 mm thick MS sheet with supporting structureSide guard skirting :2 mm thick rubber beltConveyor body :Manu. From IS 2062, 4 mm thickness plate framing structureRear pulley cover :2 mm thick MS sheetBearing for roller:6205 2RS typeShaft :Precise Machined from EN-24 grade materialGuide rollers :∅ 60 mm pipe with bright bar spindle and sealed with single roll anti friction deep grooved ball bearing, bearing Carrying & return roller: 76.1 mm ID ERW pipe with CI housing, bright bar spindle and sealed with single roll anti friction deep grooved ball bearingBearing: Angular contact type with fitted in split housingIdler Spacing confirming to IS 92951983 :Carrying Idler – 600 to 800 mm, Return Idler - 1200 to 1500 mmBelt join :Endless type beltScrappers :Driver side: Flat Scrapper Rear Pulley: V plough type Take up: Screw type take up design at front side of ConveyorGear Box :Worm type, 20:1 ratio, Hollow input & outputBelt speed :1.2 m/secPulley RPM :72 RPMConveyor direction: Uni- directional (One side)VFD specification: VFD suitable for speed control of conveyor belt motor ranging from 50% to 100% of rated speed Speed Control :0.6 to 1.2 m/sec ( using gear & VFD)

Municipal Engineer

Bhongir Municipality

Removal of wet silt and sludge from sullage drains,storm water drains with aid of baskets and vessels, etc with initial lift of 3 m and lead of 50 m.

Removal of wet silt and sludge from sullage drains, storm water drains with aid of baskets and vessels, etc with initial lift of 3m and lead of 50 m.(RCC Slab Drains)

Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks including loading, unloading and idle hire charges of machinery

Municipal Engineer

Bhongir Municipality