REPAIR AND MAINTENANCE OF SUMMER / WINTER APPLIANCES INCL SOLAR WATER HEATER OF ALL TYPE OF MD ACCN UNDER GE SHIKARGARH JODHPUR

Amount

Taking down ceiling fan, exhaust fan and wall mounting fan etc of any make, type & sweep including checking the serviceabilty of ceiling fan, exhaust fan, wall mounting fan, Padestal fan etc in the presence of MES representative, transporting the same to work shop and refixing the same after replacing of unserviceable parts all as directed by Engr-In-Charge. Note : Any unsv parts reqd for replacement shall be measured and paid separately under respective item of Schedule as supply only.

Dismantling and Removing old burnt copper wire winding of ceiling fans of any size & sweep of any make and rewinding with new enameled super copper wire of existing gauge as per old copper winding incl providing insulation by varnishing (golden), cleaning, oiling, greasing etc all as specified and directed by Engr-in-Charge.

All as per Item No 2 as above but for Exhaust fan of any size & sweep of any make.

All as per Item No 2 as above but for Wall mounting fan of size & sweep of any make.

Dismantling carefully all parts of Ceiling fans/ Exhaust fan/ Wall fan of any size & sweep of any make, cleaning, oiling, greasing etc and refixing all the parts and testing all as specified & directed by Engr-in-Charge.

Supply only 2.5 mfd capacitor for ceiling fans/exhaust fan/Cabin fan/Table fan of capacity /ISI marked.

Supply only 3.15/4.0 mfd mfd capacitor for ceiling fans/exhaust fan/Cabin fan/Table fan of capacity /ISI marked.

Supply only ball bearing suitable for any type of ceiling fan.

Supply only ball bearing suitable for any type of exhaust fan/wall fan/pedestial fan.

Supply only MS clamps (Standard size) with rubber real with MS nut, bolts, check nut & split pin complete.

Supply only canopy for ceiling fans.

Supply only fan blade for ceiling fan of any type & size.

Supply only fan blade for Exhaust fan of any type & size.

Supply only fan blade for wall fan/pedestial fan of any type & size.

Supply only PVC exhaust fan motor in replacement of old unserviceable burnt motor for any type, size and make complete all as directed by Engr-in-Charge

Supply and fix in replacement of down rod up to 2 feet including check nut bolts and quarter pin for ceiling fan complete all as directed by Engineer-In-Charge.

Painting of ceiling fan of any make, type & sweep with one coat of approved first quality synthetic enamel paint matching to the existing color including writing the MES No. all as directed by EIC.

S&F for flexible PVC unsheathed twin core copper conductor cable of size 23/0.077 in nominal area all as required and directed

Supply and fixing in repair electronic type regulator 240 Volts.

Supply and fixing in repair modular fan step regulator 2 module.

M&L for attending of complaint in MD Accn at shikargarh as complaint noted on daily basis at complaint cell Shikargarh for Unsv storage type water heater by disconnecting the electric connection and water inlet/outlet connection the from main and repairing the water heater storage type capacity 25/35 ltrs of any type and make, Checking the serviceability of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly complete (considered as one unit) and installing and testing the same as per the direction of Engineer-in-charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.

M&L for attending of complaint in MD Accn at shikargarh as complaint noted on daily basis at complaint cell Shikargarh for Unsv storage type water heater by disconnecting the electric connection and water inlet/outlet connection the from main and repairing the water heater storage type capacity 50 ltrs of any type and make, Checking the serviceability of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly complete (considered as one unit) and installing and testing the same as per the direction of Engineer-in-charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.

Supply only for replacement new heating element including rubber ring, washer, holding clamps and nuts of 1.5 KW capacity complete all as specified & directed.

Supply only for replacement new heating element including rubber ring, washer, holding clamps and nuts of 2.0 KW capacity complete all as specified & directed.

Supply only for replacement new thermostat of temperature variating ranging from 25 degree centigrade, suitable for 25 litre capacity geyser complete all as specified & directed.

Supply only for replacement new thermostat of temperature variating ranging from 25 degree centigrade, suitable for 50 litre capacity geyser complete all as specified & directed.

Supply only for replacement new PVC connection (heavy duty) for HOT and COLD water of 15 mm dia with required length with 2 Nos of brass, chromium plated nuts complete all as specified & directed.

Supply only for replacement safety valve ISI marked.

Supply only for replacement pressure realizing valve fo size 15 mm dia

Supply only bottom covering apparatus plate in two halves for Geyser of any capacity as per existing complete all as directed.

Supply only indicator lamp square type/round type/rectangular type as per existing at site, 220 volts complete all as specified.

Scraping of old painted surfaces of Geyser & making smooth surface for painting & applying one coat of white synthetic enemelled paint over the body of Geyser 50/35/25 litre capacity.

Supply and fixing in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps.

M&L for brazing the inner tank of any capacity not exceeding 25 cm in length including top portion and making the Geyser leak proof and testing after filling with fresh water, complete all as directed.

S&F in replacement Bib tap ISI Marked of size 15 mm cast copper alloy with clutch or butterfly handle ,screwed for iron pipe or for brass ferrule and fixed complete all as specifed and directed by Engr-in-charge . Make : Zolato.

S&F in replacement 3 pin top plug 15 Amp press type complete all as specified.

Supply only apparatus assembly complete with incoming /out going brass pipe complete with gasket, nuts, bolts, washers as required for fitting for 50 ltr capacity.

Taking out old and Supply & fix gun metal non return valve 15 mm dia including proper connection complete all specified and directed by Engr-in-charge.

Taking out old and Supply & fix angle valve 15 mm dia including proper connection complete all specified and directed by Engr-in-charge.

M&L for attending of solar water heater complaint noted at complaint cell shikargarh and taking down/disconnecting 300 LPD Solar water heater for repair /maintenance including servicing of solar Water Heater and De-scalling of Solar Water heating tank and pipe lines by re-circulating descaling solution with pumps suitable for 300 LPD solar water heating plant including replacement of minor parts such as nuts,bolts,washers etc complete all as specified and as directed installed at roof top of bldgs upto 02 to 04 story and refixing & testing and commissioning after repair complete Note : Any unsv parts reqd for replacement shall be measured and paid separately under respective item of Schedule as supply only.

Supply only complete set of flat plate collector with toughened glass suitable for 300 LPD solar water heating plant complete all as specified and as directed

Supply only glazing gasket suitable for flat plate collector toughened glass 300 LPD solar water heating plant complete all as specified and as directed .

Supply only toughened glass of suitable size as per existing for 300 LPD solar water heating plant complete all as specified and as directed .

Supply only flange with nipple suitable for 300 LPD solar water heating plant complete all as specified and as directed .

Supply only flange gasket with nut & bolt complete suitable for 300 LPD solar water heating plant complete all as specified and as directed .

Supply only hose pipe 25 mm dia , pressure 12 kg/sqcm with 02 Nos jubli clamps suitable for connecting inlet and outlet of 300 LPD solar water heating plant complete all as specified and as directed .

Supply only storage tank SS 304 / SS 316 PUF of suitable size or as per existing as on ground for 300 LPD solar water heating plant complete all as specified and as directed .

Cleaning / descaling of flat collector set of 3, of solar heating system by using water/chemical for 300 LPD solar water heating plant complete all as specified and as directed .

S&F Gun-metal, globe or gate valves 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valves 15 mm, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F PVC Tank cover suitable for 500 ltr tank as per existing sample complete all as specified and as directed by Engr-in-Charge.

Cleaning and removing all scale and dirt etc, from PVC tanks upto 500 ltr and from mouths of circulating pipes and supply and fixing new25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or washers etc make storage tank water leakage proof at entire satisfication and complete all as directed by Engr-in-Charge.

S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) in white colour hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

M&L for Lagging to pipes used in internal water supply or plumbing all round with, 13 mm thick nitrile rubber insulation for expose of pipe including taking down unserviceable for GI pipe size 15/20 mm dia

Taking down old unserviceable and Supply, fixing, Jointing and testing 15 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking down old unserviceable and Supply, fixing, Jointing and testing 20 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking down old unserviceable and Supply, fixing, Jointing and testing 25 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Surendra Singh

Mahesh Dave

M/S VENUS BUILDER