CONSTRUCTION OF MULTIPURPOSE HALL

Amount

CIVIL WORKS

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in- Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Thickness above 10mm upto 25 mm

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - mechanically Treated bars of grade Fe-500D or more

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

Supply and laying Gypsum plaster/ irani putty plaster over wall including papering with suitable sand paper and leveling wall surface ,to prepare the surface even and smooth complete. 2 or more coat including cost of convance and scafolding etc.

Dismateling Fixed and open toughened glass removable with aluminum partion frame ,disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

Supply and Filling with Light wight cinder agreegate<br>spreading in layers, leveling the top at site and consolidation by ramming, etc complete for

Dismantling of Ac duct sheet removing stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

Acoustic panel: Supply and installation of frame with GI channels (GI section up to 30 cm distance, GI intermediate up to 3 feet distance, GI L angle for roof support and GI perimeter for wall support) powder coated drywall screw 1" for sheet and channel and acoustically treated polyester wading (polywool) 50mm, 1000gsm & fixing wood wool board of size 4 feet x 2 feet, 15 mm thickness with NRC 0.85-0.90 , 400Kg/m3 density and finally finished with polyester fibre board(pet panel) of size 8feet x 4 feet, 10mm thickness with NRC value 0.85-0.90 as per design drawings

Calcium silicate board: supply and installation of frame with GI channels (GI section up to 30 Cm distance, GI intermediate up to 3 feet distance, GI L-angle for roof support and GI perimeter for wall support) powder coated drywall screw 1" for sheet channel fixing, poly wool (50mm, 1000gsm) and finally finished over the poly wool with perforated calcium silicate board size 600 x 600 x 8mm of density 900-950 kg/m3 including paint finish etc; as per design drawing.

Chair: Supply and installation of the stackable chair with powder coated legs and of approved colour. (Make:-(Featherlite- Genius)

ELECTRICAL WORKS

Point wiring in P.V.C conduit, with modular type switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Twin control light point in P.V.C conduit, with modular type switch: Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring in existing PVC conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire

Wiring in existing PVC conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire

Wiring in existing PVC conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 4 sq mm + 1 x 4 sq mm earth wire

S/L telephone cable: Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

S/F PVC Conduit: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

S/F PVC Conduit: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch

S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet

S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

S/F modular type blanking plates : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

S/F modular boxes, base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mmX75 mm)

S/F modular boxes, base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100 mmX75 mm)

S/F light plug point with modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

S/F LED light fittings directly on ceiling/wall : Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required..

S/L of Cat 6 cable : Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

S/F 2x6A plug point with modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

S/F SPN MCB DB : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door

S/F Horizontal TPN MCB DB : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 4 way (4+12), Double door

S/F Vertical TPN MCB DB : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4+12), Double door

S/F 'C' Series MCB : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

S/F 'C' Series MCB : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole

S/F 'C' Series MCB : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

S/F 'C' Series MCB : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole Neutral

S/F 4P MCB Isolator: Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with onnections, testing and commissioning etc. as required. 40 amps

S/F 4P MCB Isolator: Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with onnections, testing and commissioning etc. as required. 63 amps

S/F TPN RCCB : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

S/F TPN RCCB : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 450 mm width X 50 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 450 mm width X 50 mm depth X 2.0 mm thickness

S/F 25 x 5 mm copper strip : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

S/F bare Cu wire for loop earth : Supply and land fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

S/F of L.T. XLPE cables on surface : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

S/F end termination of L.T. XLPE cables : Supply and making indoor end termination with single compression type cadmium plated brass cable glands, Aluminium lugs, for the following PVC sheathed / XLPE) aluminium conductor cable of 1.1KV grade as required 2C x 10Sq.mm (19 mm)

S/F end termination of L.T. XLPE cables : Supply and making indoor end termination with single compression type cadmium plated brass cable glands, Aluminium lugs, for the following PVC sheathed / XLPE) aluminium conductor cable of 1.1KV grade as required 4C x 10Sq.mm (25 mm)

S/F end termination of L.T. XLPE cables : Supply and making indoor end termination with single compression type cadmium plated brass cable glands, Aluminium lugs, for the following PVC sheathed / XLPE) aluminium conductor cable of 1.1KV grade as required 4C x 25 Sq.mm (28 mm)

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 32A DP switch with indicator

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 25A 3 pin plug top with indicator

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 25A 3pin Shuttered socket

S/F Thermoplastic weather proof enclosure : Supply and fixing Thermoplastic weather proof enclosure on surface/ recess along with provision for fixing one number 4P ELCB & one number TPN/ 4Pole, 415 V Isolator etc. as required.

S/F MCCB :Supply and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 63A, 25KA, FPMCCB

Supply of 22W recess slim LED down lighter : Supply and providing 22 W, recess mounting type, integral slim LED down light fittings with white powder coated Die cast aluminium body with anodised aluminium reflector etc.as required. (Make:Philips Dura Slim,Crompton,Wipro)

Supply of 7W recess LED down lighter : Supply and providing round shaped 7W, recess mounting type, integral slim LED down light fittings with white powder coated Die cast aluminium body with anodised aluminium reflector etc.as required. (Make:Philips Dura Slim,Crompton,Wipro)

Supply of recess Tiltable LED COB light : Supply of recessed Tiltable LED COB having power consumption not more than 7W and light output not less than 560Lumens with System efficacy> 80 Lumen/Watt. Housing Shall be made of pressure die cast aluminum body with 42mm height.The Luminaire should be having Minimum 50000 Burning hours(L70B50) with CRI ≥80, SDCM<5 ,UGR<19 and Co-related color temperature (CCT) of 6500K.The luminaire must have 2KV surge protection integrated in driver, PF≥0.95, Ripple<5%,Total harmonic distortion THD≤10%,EMI/EMC Compliant and Operating voltage range 140-270Vac and driver shall be separately BIS approved of same make equivalent to Philips 7W Sky COB Tiltable or Equivalent ,Type Test certificate and Bis certificate need to be submitted.

Supply of Led Strip Light along with driver (12v 5A ) CT : 4000K CRI : PF : > 0.95 lag Input: 220-240V, 50Hz. Surge rating : 2.5kV or above. Driver : Integral constant current electronic driver Housing : Extruded aluminium powder coated, white in color. IP Rating : IP20 THD : <10%, Luminaire and driver shall be separately BIS approved of same make equivalent to Philips Sky pro 168 LED/Mtr

S/F CAT 6 RJ 45 Computer Jack, Modular on existing box & plate: Supply and fixing modular type CAT 6 RJ 45 Computer Jack on existing modular box & cover plate and giving connections etc as required.

S/F modular type switch/ socket : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. HDMI Socket

Supply & fixing of 400mm wall Fan : Supplying and fixing 400 mm sweep wall fan with 3 speed positions with pulling cord and giving connections, testing & commissioning etc as required.

Supply of Al XLPE armoured power cable : Supply of following size heavy duty XLPE insulated and PVC sheathed armoured power cable, conductors of best conductivity aluminium, 1.1 KV grade, conforming to IS 7098 (part-I) etc, as required. 2C x 10 Sq.mm

Supply of Al XLPE armoured power cable : Supply of following size heavy duty XLPE insulated and PVC sheathed armoured power cable, conductors of best conductivity aluminium, 1.1 KV grade, conforming to IS 7098 (part-I) etc, as required. 4C x 10 Sq.mm

Supply of Al XLPE armoured power cable : Supply of following size heavy duty XLPE insulated and PVC sheathed armoured power cable, conductors of best conductivity aluminium, 1.1 KV grade, conforming to IS 7098 (part-I) etc, as required. 4C x 25 Sq.mm

S/F RJ 45 (Cat 6) Data cable termination Box: Supply and fixing of 4U powder coated GI server rack with 1Nos 24 Port 10/100/1000 Mbps Network Unmanaged Switch, 6way Spike,1Nos 24-Port Cat 6 RJ-45 UTP Unshielded Wall mount or Rack mount Patch Panel,Cooling Fan 1No. ,system tray & 10Nos patch codes with lockable acrilyc front door, including power plugs, termination & testing etc. as required.

Rearrangement of the existing fire sprinkler system etc.as required.

Supply, installation, testing and commissioning of LED signage "EXIT" in green colour with built in battery back-up for 2 hrs, etc complete as per the direction of Engineer- in- charge.

Supply, installation, testing and commissioning of LED signage in green/ red colour, etc complete as per the direction of Engineer- in- charge

Supply, installation, testing and commissioning of LED seat signage in different colour, etc complete with necessary wiring etc, as per the direction of Engineer- in- charge

S/F DCP fire extinguisher (5kg) : Supply and Installation of 5kg Dry Chemical Powder type (DCP) fire extinguishers having ISI mark along with mounting supports etc. as required.

DOCUMENTS & APPROVAL : Preparation of necessary forms, documents drawings etc. with necessary certifications & test reports and procuring approval and energisation certificate from Electrical Inspectorate & Kerala state Electricity Board, including all miscelaneous expenses and all related expences & formalities shall be met by contractor but excluding inspection & testing charges, statutory charges, Power allocation charges, cash deposit etc.

HVAC Works

Supply, installation, testing and commissioning of VRF Modular Outdoor Unit - suitable to operate at 48°C ambient temperature comprising of variable hermetic inverter compressors, (full inverter compressor/ Multiple compressors per module) Matching air cooled condenser with copper tubes and aluminium fins duly covered by anti-corrosion and hydrophilic resin film.Combination of inverter hermetic scroll compressors suitable for operation on R-410A, complete with high/low pressure cut-outs, oil pressure failure switch, fan motor, safety thermostat, over current relay, protective devices for electrical and electronics components, fusible plugs, fuses, cabling etc. and suitable for operation on 360V”415V”3Ph 50Hz A.C. supply, Oil separator suitable for the refrigerant piping, Accumulator, liquid and gas shut-off valves and solenoid valves/modulation valve with fittings to interconnect compressor, condenser and evaporator coils. (Make : Blue star) 20HP OOTDOOR UNIT

VRF INDOOR UNIT: Supply, Installation , testing and commissioning of following minimum or higher capacity ceiling suspended indoor ductable units for VRF system with all standard fittings,IDU drain pan, as per specifications complete with cordless remote, suitable capacity drive motor, electrical controller, temperature controller with digital display, thermostat, complete with all necessary fixing arrangements. (Make:- BLUE STAR) 8 TR DUCTABLE WITH WIRED REMOTE

Supply, Installation ,testing and commissioning of VRF compatible indoor evaporative Cassette type units with cordless remote, of following minimum capacities including fixing of room unit, with high lift drain pump, electrical cabling from power plug, complete in all respects as per the technical specifications. (Make:- BLUE STAR) 3 TR 4 way Cassette Unit

Supply, Installation ,testing and commissioning of VRF compatible indoor evaporative Hi Wall type units type with cordless remote, of following minimum capacities including fixing of room unit, with high lift drain pump, electrical cabling from power plug, complete in all respects as per the technical specifications. (Make:- BLUE STAR) 1TR Hi Wall

Supply, Installation, Testing & commissioning of Y-Joints of required size including insulation and all other standard accessories.

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 6.54 mm Dia

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 9.50 mm Dia

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 12.70 mm Dia

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 15.90 mm Dia

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 19.03 mm Dia

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 22.20 mm Dia

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 28.60 mm Dia

REFRIGERANT PIPING: Supply & Installation of Copper Soft/Hard drawn Refrigerant Copper pipes to integrate outdoor/indoor units. The rate shall inclusive of FM approved closed cell nitrile rubber insulation 19 mm for Liquid Pipe, 13 mm for Gas Pipe covering with factory laminated fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical impact. (Make: TOTALINE/ MANDEV /MEXFLOW) 34.8 mm Dia

SHEET METAL WORK: Supply, installation, testing and balancing of factory/Site fabricated rectangular GSS ducting of following thickness including necessary supports, hangers, flanges, nut bolts, gaskets, splitter dampers, vanes, access door, canvas connections etc. complete as per standards.(Make: TATA/JINDAL/SAIL) GSS 22 G

SHEET METAL WORK: Supply, installation, testing and balancing of factory/Site fabricated rectangular GSS ducting of following thickness including necessary supports, hangers, flanges, nut bolts, gaskets, splitter dampers, vanes, access door, canvas connections etc. complete as per standards.(Make: TATA/JINDAL/SAIL) GSS 24 G

ACOUSTIC INSULATION: Supply, installation and testing of acoustic lining with 10 mm thick open cell nitrile foam on the inner side of ducting including providing, fixing and finishing the same as per specifications for ducts as required density of material shall be 140-180 kg/cubm. (Make : ALP,ARMAFLEX,KFLEX)

THERMAL INSULATION: Supply, installation and testing of thermal insulation of ducts using closed cell Nitrile Rubber insulation with recommended adhesives and sealed with self adhesive 3mm thick tape and density of material shall be 40-60 kg/cubm. (Make : ALP,ARMAFLEX,KFLEX)

AIR TERMINAL DEVICES: Supply, Installation , testing and commissioningg of Powder coated extruded aluminium 4 way removable core type Supply air Diffusers complete with volume control damper. (Make : AIR MASTER/ COSMIC/ SYSTEMAIR)

Supply, Installation , testing and commissioningg of Powder coated extruded aluminium 4 way removable core type Return air Diffusers without volume control damper. (Make : AIR MASTER/ COSMIC/ SYSTEMAIR)

Supply, installation, testing and commissioning of Fresh Air louvers with bird screen

Supply, fabrication, installation, testing of flexible connections made out of fire resistant flexible canvas sleeve.

Supply, Installation, Testing & Commissioning of control cum transmission wiring between ODU, IDU & Central controller of required size with pvc conduit and other accessories as per specification and relevant standards.

Supply, testing and commissioning of condensate drain UPVC piping as per BIS 4985 with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell nitrile rubber insulation, fire retardant grade as per the drawing and relevant standards.

Supply, filling, testing and commissioning of Refrigerant Gas (R 410) etc as required.

ELV WORKS

S/F PVC Conduit: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

S/F PVC Conduit: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and drawing of HDMI Cable 4K High-Speed HDMI Cord 18Gbps with Ethernet Support 4K 60Hz Compatible with UHD TV, Monitor, Computer, Xbox 360, PS5 PS4, Blu-ray, and More with Male to Male 24K Gold Plated connector in the existing surface/ recessed PVC conduit etc. as equired. (Make:Kramer/ Honeywell)

Supplying and drawing of 1.5 Sq.mm 2 Core Copper Conductor Speaker Wire in the existing surface/ recessed PVC conduit etc. as required.(Make:Polycab,RR Kabel,Finolex)

SITC of TV :-Supply and fixing of 4K Smart 163 cm (65 inch) Ultra HD(4K) LED Smart Teleivision with USB drive format support, 3 Nos HDMI inputs, composite video input(s), Digital Audio Output (s), USB HDD recording, Sound Output 20W, Built In Wi-Fi, display resolution Ultra HD (4K) 3840 x 2160 Pixels including all accessories and remote, etc as required. (Make :Samsung-Model 65CU7700)

SITC of Projector with Screen: Supply, Installation,Testing & Commissioning of Projector, Maximum Projection Distance: 8 feet, Lamp Life: 6000 hrs, FHD, Resolution: 1920 x 1080 Pixel, 22000:1 High Contrast Ratio, Maximum Brightness: 3400 lm, Power Supply AC 100 to 240 V, 50/60 Hz,VGA/HDMI Cable, Power Cable, Remote Control Included Batteries, User Manual (CD), Wall mounting kit, with auto lock manual white projector screen wall mountable Projector Screen 10 feet (width) x 8 feet (height) Pull-Down Screen type, including all accessories etc. as per the direction of engineer in charge as required. (Make: BENQ MH 560, EPSON EH-TW750 or equivalent)

SHREE DESIGNERS (BID ID -2044474)

ASBAR VAFA TK (BID ID -2049965)