Additional work for raising of First Floor of Attendant Shelter Sheds near Emergency at SKIMS Soura

Earth work in excavation by manual means in trenches for foundation, drains, pipes, cables etc incl. getting out excavated earth and disposal of excavated earth as directed in all kinds of soils.50mtrs beyond 1m cutting edge

Providing and laying of hand packed stone solling/ boulders including all carriages complete upto site.

Providing and laying of specified grade of cement concret incl all works upto plinth level in 1:4:8mix with 40mm nomonal size aggregate.

Providing and laying of specified grade of cement concrete incl all works upto floor V level in 1:2:4 mix with 20mm graded stone aggregate.

Providing and laying of Reinforced cement concrete of specified grade incl all works upto floor V level in 1:1.5:3 mix with 20mm graded stone aggregate.

Steel reinforcement for RCC works including straightening, cutting, bending, binding and placing in position all complete.

Brick work with common burnt bricks of class designation 75 A in foundation and plinth in 1:4 mix.

Extra for Brick work with common burnt bricks in superstructure above plinthupto floor V level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length. K.D wood. Finished work to be measured . Holdfast to be fixed in cment concrete in 1;2;4 mix and black japan on wall side.

Centering and shuttering including strutting , propping etc removal of form work for

A) Lintels, beams, plinth beams, griders, brussumers and cantilevers etc.

B) Suspended floors, roofs, landings, balconies and acces platforms.

C) Edges of slabs and breaks in floors and walls under 20cm wide

12mm cement plaster of mix 1:4 (1 cement:4 coarse sand) .

Washed stone grit plaster on exterior walls of height upto 10 m above ground level in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per m2, top layer 15mm cement plaster 1:1/2 :2 (1 cement: 1/2 coarse sand : 2 stone chippings 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in -charge (payment for providing grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.

Providing and laying 600x600mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows fixed with butt hinges cost of butt hinges will be paid seperately using 3.50 mm thick glass panes in K.D wood. Imported wood including cost of glazing

Providing and fixing 35mm thick wire gauze shutters for doors, windows and clerestory windows fixed with butt hinges cost of butt hinges will be paid seperately using 0.63 mm dia of wire in K.D wood. Imported wood including cost of wire gauge.

Providing and fixing 35mm thick flush door shutter ISI marked Non decorative type core of block board with frame of Ist class hard wood and well matched 3 ply veneering with vertical grains including cost of butt hinges.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Applying primer With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.( two or more coats on new work)

Providing and fixing of hardware fittings of approved make.

Tower bolts 100mm

Tower bolt 150mm

Handle 100mm

Handle 150mm

Link Locks 8''

hooks( window stays)

Door Stoper

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer 0.50 mm thick sheets.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick

Providing and fixing of 16mm dia & 450mm long anchor bolts approved make.

Carriages of materials by mechnical transport.

Sand from 12Km

Aggregate from 20 Km

Bricks from 28Km