Gangapur Solar Water Supply Scheme under Gidhor Village of Block Sitarganj

Amount

Boring boulder strata

Hiring of machinary for India Mark-II Hand Pump boring work.

Construction of 200 mm dia bore hole by casing Method in soil mixed with clay ,bajri and boulders including erection of boring and T & P, handing and dismentiing after complection of work also including all labour required for leveling of site loading arrangement etc.

0 to 20 M.B.G.L.By casing method

Construction of 150 mm dia bore by Casing Method in soil mixed with kankar, bajri etc. including development of bore and erection of boring assembly and T&P, dismantling after completion of work also including all labour required for leaving of site.

Construction of 150 mm dia bore by Palm and Pressure method in soil mixed with kankar, bajri etc. including erection of boring and T&P, dismantling after completion of work also including all labour required for leaving of site.

25.00 mt to above

Supply and fixing of 63 mm dia(OD) NB PVC Ribbed strainer 3meter long with one meter lone PVC blind pipe 10kg/cm2 i/c PVCrubber socket 63x50mm dia as per german specification DIN 4925 Part-1 confirming to IS: 12818 using in palm pressure method &labour etc. complete.

Supply and fixing of 110 mm dia 6 kg /cm2 ISI marked PVC pipeusing in palm pressure method including all fixing materials laboursocket etc. complete

Supply and fixing of 63 mm dia 6 kg/cm2 PVC pipe using in palmpressure method including all fixing materials labour socket etc.

Supply and fixing of of 100 x 63 mmØ PVC reducer (6kg/cm2)

Supply and installation of India Mark-II Hand Pump Machine setover the boreing as per instruction of the Engineer Incharge includingof all labour materials etc .complete .

Supply and fixing of 32 mm dia 3 meter long G.I.medium pipe including socket etc. complete and fixing in cylinder and hand pumpmachine with proper completion of work.

Supply and fixing of Circular Precast Concrete Plate-form andC.C.drain (1 meter long) including making a block of size 0.76 x0.76 x 0.40 in P.C.C.1:2:4 for hand pump as per type design including supply of all materials, labour T & P required for propercompletion of work

Embossing the details of hand pump installation as per departmentalcircular over the hand pump body complete..

Development of bore by over pumping and back washing till thedischarge free from turbidity ( Man tolerance 20 mg per litre turbidity20 minutes of starting the pump ) including equipment labour T&P etc. required for proper completion of the work.

Disinfection of H.P. using powder chlorine compound includingthrough cleaning of all exterior parts of hand pump coming in contactwith water, also including supply of bleaching powder complete.

Surrounding or Packing added coarse sand in between the bore holeand the strainer up to 3m from the strainer, including supply ofcoarse sand, labour T&P etc. required for proper completion of the work.

Sealing of the annular space between the housing pipe and the borehole in single continuous operation with puddle clay, bantonite clayand cement concrete as per drawing supplied by the department including supply of all material, labour T&P etc. required for completion of work.

5 KL SOLAR PUMP

Providing installing, Testing and commissioning of 2000Wp High Efficiency Solar Panels Mono of Loom/Adani/WareeVikram/IB Solar/UTL or equivalent brands with all necessary attachments, including freight, insurance, loading and unloading etcincluding supply of all labour T&P etc requiredfor proper copletion of work all complete.

Providing installing, Testing and commissioning of 2 HP Three Phase Hybrid Technology (Dual energyAC/DC) Solar pump,head upto 80 mts, performance 7/8 hours per day, make : Crompton including all type of specials; reducer, Tee, Bend, Sockets, Union, Valves, Clamps required for rising main pipe line etc all complete in all respects including supply of all, labour T&P etc complete for proper completion of work

Supplying & erecting of Solar Pump controller all complete with panel covering & locking MS coating box. 500mm x 700mm x 400mm (LXBXH) power point from PV modules. Variable frequency Drive helps in seamless operation of motor under various weather conditions. Solar Pump Controller is an electronic device used for uniterrupted operation of solar pump. Controller is equipped with inbuilt MPPT and VFDMPPT helps to track maximum. Minimum DC Voltage 70 V, MAX DC Voltage 180 V, Nominal DC Voltage 120V, Start Voltage 90 V, MPPT Voltage Range 90 -180 V, Max DC Input Current 10 A, Max Power at DC side 2000W No of PV Strings : 2

Supplying & fixing of Wide voltage range and RS485 communication port all complete.

Providing & fixing DC cabling (POLYCAB/KEI or Equivalent), upto 45 meter.

Providing and fixing Lightening/Surge protection system (JMV or Equivalent) and Earthing system for structure.

Providing & fixing Isolator between LT panel and ACDB (Schinieder/ L&T/ Hager or equivalent) and MPPT Tracker an MPPT, or maximum power point tracker is an electronic DC TO DC converter that optimizes the match between the solar array ( PV panels) and utility grid & Earthing system.

Providing & fixing Water controllingf level sensors.

Supply & Installation of hot dip galvanized 8 meter Height steel structure with ladder on suitable solid foundation made of reinforced cement concrete with standard Hot Dip Galvanised steel (>80 micron) Panel mounting structure, to sustain 150 Km/Hr wind speed including design , commissioning supply of all labour T&P etc required for proper complete of work all complete

Supply & Installation of 5000 Ltr HDPE water storage tank 8 meterheight on steel structure.

Comprehensive maintenance contract charges of 5 years for solar dual energy system. NOTE :- ACMC will @RS25000/-for every year.

10 KL SOLAR PUMP

Providing installing, Testing and commissioning of 3000Wp High Efficiency Solar Panels Mono of Loom/Adani/WareeVikram /IB Solar/UTL or equivalent brands with all necessary attachments, including freight, insurance, loading and unloading etcincluding supply of all labour T&P etc requiredfor proper copletion of work all complete.

Providing installing, Testing and commissioning of 3 HP Single Phase Hybrid Technology (Dual energyAC/DC) Solar pump,head upto 80 mts, performance 7/8 hours per day, make : Crompton including all type of specials; reducer, Tee, Bend, Sockets, Union, Valves, Clamps required for rising main pipe line etc all complete in all respects including supply of all, labour T&P etc complete for proper completion of work

S/O Spare Pump set of same duty

Supplying & erecting of Solar Pump controller all complete with panel covering & locking MS coating box. 500mm x 700mm x 400mm (LXBXH) power point from PV modules. Variable frequency Drive helps in seamless operation of motor under various weather conditions. Solar Pump Controller is an electronic device used for uniterrupted operation of solar pump. Controller is equipped with inbuilt MPPT and VFDMPPT helps to track maximum. Minimum DC Voltage 70 V, MAX DC Voltage 180 V, Nominal DC Voltage 120V, Start Voltage 90 V, MPPT Voltage Range 90 -180 V, Max DC Input Current 10 A, Max Power at DC side 3000W No of PV Strings : 2

Supplying & fixing of Wide voltage range and RS485 communication port all complete.

Providing & fixing DC cabling (POLYCAB/KEI or Equivalent).

Providing and fixing Lightening/Surge protection system (JMV or Equivalent) and Earthing system for structure.

Providing & fixing Isolator between LT panel and ACDB (Schinieder/ L&T/ Hager or equivalent) and MPPT Tracker an MPPT, or maximum power point tracker is an electronic DC TO DC converter that optimizes the match between the solar array ( PV panels) and utility grid & Earthing system.

Providing & fixing Water controlling level sensors.

Supply & Installation of hot dip galvanized 8 meter Height steel structure with ladder on suitable solid foundation made of reinforced cement concrete with standard Hot Dip Galvanised steel (>80 micron) Panel mounting structure, to sustain 150 Km/Hr wind speed including design , commissioning supply of all labour T&P etc required for proper completion of work all complete for 10000 LTR tank load capacity.

Supply & Installation of 10000 Ltr HDPE water storage tank 8 meterheight on steel structure.

Comprehensive maintenance contract charges of 5 years for solar dual energy system.

Chamber

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

P.C.C. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Brick work 1:4 with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth.

12 mm thick plaster on brick work with 1:4 cement mortar

Rectengular shape precast R.C.C manhole cover with frame of size 1000X1000X75mm

RCC 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Rising Main

Providing of all material carting etc of raising main Heavy duty (Class C) G.I pipes conforming to IS 1239 (part 1) including supply of all material like special white lead hemp and oil etc in bore well to water storage tank wit its cutting threading and testing of pipe line etc complete

32 mm dia.

Distribution System

Providing, Lowering into trenches with true to alignment, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. HDPE PN-6.0 PE-100

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal.

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:6(1 cement : 6 coarse sand) for sluice valve/Non Return valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3mix (1 cement : 1.5coarse sand : 3graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:4:8 (1 cement : 4fine sand : 8graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:6 (1 cement : 6 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

HOUSE SERVICE CONNECTION FOR VILLAGE

Providing of all materials, carting from site store to site of work, laying & jointing of G.I. Medium screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. Medium Duty (class 'B') - 15 mm (average 6.00 m For each house connection)

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal.

Providing and fixing brass ferrule 15mm dia. nominal bore for domestic connections.

Providing and fixing PTMT bib cock of approved quality and colour : 15 mm nominal bore, 86 mm long,weighing not less than 88 gms

Making ferrule connection in the existing main of D.I., G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. Ferrule Connection (Labour cost only)

R.M.I RURUL MY INDIA PRIVATE LTD.