15th F.C. Tied Grant-2022-23 (1st Installment)

Manufacture, Supply, & Delivery of 110 mm dia 6 Kg/cm2 PE 100 HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc. complete ISI marked. PN 1.6 (MPa)

Supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding GST and specials etc., complete. a) End Caps - OD 100 mm

Supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding GST and specials etc., complete. b) MS Flange - OD 110 mm

Supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding GST and specials etc., complete. C) Pipe end long neck- OD 100 MM

Supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding GST and specials etc., complete. d) Bend - OD-110 MM

Supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding GST and specials etc., complete. f) TEE - OD 100 mm

Supplying and delivery of CID Joints with drilled holes and with rubber rings, bolts and nuts etc, complete with suitable for above AC pipes of class-10 as per ISS specification No. 8794/88 as amended from time to time including revision. Class - 10 Unit each. 100 mm dia

Supply and delivery of 6 mm thick Rubber Packing excluding taxes and including conveyance etc., complete and as directed by the Engineer- in -Charge of the work.

Supply and Delivery of Bolts & Nuts with double washers including Conveyance etc., complete, but excluding taxes (1/2" TO 1")

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Manual Means - 70% of mechanical

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Manual Means - 30% of Manual

Supply and filling with Crusher Stone Dust complying with standard specifications including cost and conveyance of Crusher Stone Dust to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.

Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.

Lowering, keeping in position and fixing DI / C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm size hard, machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work etc., complete and as directed by the Engineer- in -Charge of the work

Plain Cement Concrete M-20 Nominal Mix using 20mm metal from approved quarry using Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges, and overheads & contractors profit for finished item of work

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD / Sections 1500, 1600 & 1700 MORTH including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work for design mix RCC M20 using concrete mixer for culvert etc., complete and as directed by the Engineer- in -Charge of the work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Yemmiganur Municipality