PERIODICAL SERVICES AND CLEANING OF WATER TANKS TO OTM ACCN AND REPAIR TO JOINERIES FOR MD ACCN AND OTM ACCN UNDER AGE B R II MAINT AT INA EZHIMALA

Amount

Notes:- (i) The scope of work is to be carried out from ground level to nearly upto 40 metres of height. (ii) Quoted rates are deemed to be inclusive of scaffolding/boom lift/crane as required. Contractors should arrange necessary scaffolding/ boomlift/ crane and takes all safety precautions for workers including accidental insurance coverage to workmen at the time of carrying out works as described in Sch 'A'/ BOQ. (iii) Contractor should visit the site before quoting the tender to assess the resources required to execute the work as the site include prestigeous buildings of INA. (iv) Quoted rates included using mechanical means for surface preparation and application of paint as per manufacturer's instruction all as specified and directed by Engg-in-Charge. (v) The work may be carried out at different location and in different measurement/ touch ups even it is below 1 Sqm or othewise. (vi) Quoted rates includes for cleaning of paint stains on floor/window/joinery surfaces. (vii) Cost of all factors are deemed to be included in the rate quoted in BOQ. No extra claim will be entertained on this account. (viii) All debris, unserviceable items shall be removed from site and thrown away at dumping area outside INA area upto a distance of 10.00 Kms where directed. Loading, Unloading , staking and transportation charges are included in relevent items of taking down or demolition / dismantling. All debris should be taken outside of INA Campus and if any debris found dumped inside INA campus, a fine of Rs 5000.00 per load or per Cum will be recovered from contractor.

M&L for preperation of old decorated surfaces and applying one coat of sandtex matt finish on wall all as specified and as per manufacturer's instructions.

M&L for preparation of old treated ceiling surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old treated ceiling surfaces and applying one coat of oil emulsion distemper complete all as specified and as directed.

M&L for preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion paint (interior grade) on wall all as specified and as per manufacturer's instructions.

M&L for complete removal of existing treatment and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer over wall care putty to obtain smooth and even surface all as specified and as per manufacturer's instructions.

M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion paint (interior grade) on ceiling all as specified and as per manufacturer's instructions.

M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion paint (exterior grade) on wall all as specified and as per manufacturer's instructions.

M&L for preparation of old painted steel/iron surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of epoxy paint complete all as specified and as directed.

M&L for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Removing shrubs, vegetation, roots etc. from external wall surfaces, by dismantling brick work , RCC or taking down plastering as the case may be, including dismantling SWR pipes, OH PVC service tanks etc. and refixing the same in original position and making good the surface dismantled all as specified and as directed by EIC. Note:- Area to be dismantled exc 1 Sqm and not exc 3 Sqm.

M&L for treating holes, cracks etc. up to 10 mm making V groove using patti blades and filling the cracks with ready to use crack fillers and allowed to dry complete all as specified and as directed.

Dismantling the existing water tank and S&F Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of Capacity 500 litres complete all as specified and as directed.

Dismantling the existing water tank and S&F Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical / loft rectangular type with closed top) hoisted and fixed in position all as specified in SSR Part I of Capacity 1000 litres complete all as specified and as directed.

Dismantling the existing water tank and S&F Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical / loft rectangular type with closed top) hoisted and fixed in position all as specified in SSR Part I of Capacity 2000 litres complete all as specified and as directed.

Cleaning and removing all scales and dirts, etc from tanks and from mouths of circulating pipes etc. of capacity exc 250 and n.exc 500 ltrs complete all as specified and as directed. Note:- The tanks are at upto height of 20 mts from ground level or inside Forest area / Non accssable areas (site clearance to be done to reach water tank where ever required), if breakage of float valve / rusted pipes / rusted gate valves to be replaced with own cost, cleaning of tank using bleaching powder and washed with water complete as specified and as directed.

Cleaning and removing all scales and dirts, etc from tanks and from mouths of circulating pipes etc. of capacity exc 500 and n.exc 1000 ltrs complete all as specified and as directed. Note:- The tanks are at upto height of 20 mts from ground level or inside Forest area / Non accssable areas (site clearance to be done to reach water tank where ever required), if breakage of float valve / rusted pipes / rusted gate valves to be replaced with own cost, cleaning of tank using bleaching powder and washed with water complete as specified and as directed.

Cleaning and removing all scales and dirt, etc from tanks and from mouths of circulating pipes etc. of capacity exc 1000 and n.exc 2000 ltrs complete all as specified and as directed. Note:- The tanks are at upto height of 20 mts from ground level or inside Forest area / Non accssable areas (site clearance to be done to reach water tank where ever required), if breakage of float valve / rusted pipes / rusted gate valves to be replaced with own cost, cleaning of tank using bleaching powder and washed with water complete as specified and as directed.

Taking down defective/damaged water storage tank cover, supply & fix polyethylene tank cover with necessary locking arrangement all as specified and directed at site.

M&L for writing letters or figures (Block, Roman., Itallic or Indian) not exceeding 30 cm high including writing stops, commas, short lines, dashes, hyphen, brackets etc complete all as specified and directed. Ex:- "TANK-CLEANED-ON DD/MM/YYY"

S&F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to existing pipe complete all as specified and as directed.

S&F in repairs 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to existing pipe complete all as specified and as directed.

S&F in repairs CPVC gate valve 32 mm fixed to new or old pipe complete all as specified and as directed.

S&F in repairs CPVC gate valve 25 mm fixed to new or old pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections, 25/32 mm dia complete all as specified and as directed.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of 32 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staple complete all as specified and as directed.

Taking down cement plaster on bricks or stone walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering on stone masonry or faces other than fair faces of brick work in cement mortar 1:6 surfaces finished even and fair complete all as specified and as directed.

M&L for preperation of new plastered surfaces and applying two coat of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer all as specified and as per manufacturer's instructions.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

M&L for filling concrete inside frame in PCC 1:3:6, type C-0 complete all as specified and as directed.

S&F 30mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both side complete all as specified and as directed.

S&F 30mm thick 1st class hard wood glazed and skelton door shutters, open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I complete all as specified and as directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staple complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each complete all as specified and as directed.

S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer's specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Stype) consisting of frame made out MS, frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail, & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per manufacturer's specification and drawing.

S&F 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F flloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and overall length of cover plate 140mm complete all as specified and as directed.

S&F 300mm long ordinary MS rat tail rod pattern springs including roller plate complete all as specified and as directed.

Dismantling cabinets boarding, any description, fixed in any position with screws incl all fittings complete all as specified and as directed.

S&F Prelaminated particle board 18/19 thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F PVC magnet catcher fixed with screws to wooden frames complete all as specified and as directed.

M&L for PVC lipping edge tape fixed with nails/glue comoplete all as specified and as directed.

S&F stainless steel telescopic channel drawers slides(length n exc 600mm) complete all as specified and as directed.

S&F stainless steel closing hydraulic hinges for shutter complete as specified and as directed.

S&F Harrison rails, mild steel, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

M&L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing incl beading complete all as specified and as directed.

Supply & fixing in repair MS curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm,PVC coated and colour / Pattern over all dia 28 to 29mm including taking down existing curtain rod complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair plastic finial of 28 to 29mm bore decorated type of any colour /Pattern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed by Engineer-in-Charge. Make:- Aerolux/MEC or VISTA.

Supply & fixing in repair mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in repair anodised powder coated of any colour three track existing aluminium sliding windows shutters incl necessary cleaning, jointing cleats,glazing clips,ruber neoprene packing, incl 4mm mm thick tinted/ frosted glass, aluminium wire cloth etc complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, sides of rounded or chamfered on edges of sunken floor complete all as specified & directed by Engineer-in- charge. Note:- Reapir to exiting Hold fast holes.

S&F in repair for door seal with aluminium top and bottom fiber brush for glazed, skeleton and panelled door to stop germs,mosquito,snake from outer side(for size n exc 1.2mtr) complete all as specified and directed by Engineer-in-Charge.

S&F framed work such as grills, gratings etc with ends of bars sholdered or riveted or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framework of watertanks and similiar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of new or previously untreated wood based surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new surface painted steel surfaces exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat red oxide complete all as specified and as directed.

SANDR (BID ID -3088075)

CREATIVE BUILDERS (BID ID -3090071)

Gates Infra Construction Co (BID ID -3088289)

LAKSHMI BUILDERS (BID ID -3090262)

Palace constructions (BID ID -3095321)

M/S V ASSOCIATES (BID ID -3088154)

KDR CONSTRUCTION (BID ID -3089460)