EE-IED/UDP/56/2025-26

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with wooden switch board with bakelite cover and piano type switch including connection etc as required:-

Short Point :-

Medium Point :-

Long Point :-

Providing and fixing of 3 pin 5/6 amps plug point with piano type 5/6 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on switch board, earthing the 3rd pin etc. as required:-

2 x 1.5 sq.mm:-

2 x 2.5 sq.mm:-

2 x 4 sq.mm:-

4 x 6 sq.mm:-

4 x 16 sq.mm:-

Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/ surface including connection etc. as required.

1 x 1.5 sq.mm:-

2 x 1.5 sq.mm:-

4 x 6 sq.mm:-

4 x 16 sq.mm:-

Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.

19/20 mm dia

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/ 415 volts MCB/ Isolator/ RCCB (SP/ SPN/ DP/TP /TPN /FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.

2 way SPN MCB DB (Single door):-

(2+4) / 6 way SPN MCB DB (Single door):-

(2+10) / 12 way SPN MCB DB (Single door):-

Supplying and fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB, DB including connection as reqd.

6 to 32 amps SP MCB:-

6 to 32 amps DP MCB:-

Supplying and fixing of the following ratings switch disconnector fuse unit(main switch) made of sheet steel enclosure with all accessories including drilling holes on the board/MS clamp and necessary connection etc. as required

100 amps TPN 415 volts front handle cubical main switch (HRC):-

32 amps 415 volts TPN main switch (rewireable):-

Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-

100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):-

32 amps 415 volts four strip Copper busbar chamber 4 ways of size (300mmx240mmx80mm):-

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-

Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:-

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-

9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

Electronic 5 step fan regulator:-

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-

60 watt LED flood light fixture with integral driver and secondary lens (IP 66):-

60 watt LED street light fixture with integral driver and secondary lens (IP 66):-

Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required:-

3 core 4 sq mm:-

Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-

40 mm dia:-

Supplying & fixing of 40 mm dia G.I pipe (medium gauge) cross bar for fixing of ceiling fan/luminaries including painting & necessary accessories etc as required.

Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required.

254mm x 300mm (10" X 12") :-

Supplying and fixing of following i/c connection as required.

Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:-

100 amps kitkat porcelain fuse unit with base(rewireable):-