REPAIR MAINT OF WOODEN FURNITURE AT AF STN GANDHINAGAR

Amount

BED PLYWOOD TOP

Removing of old unserviceable back rest of bed and replacement of new back rest as per existing size and shape of IInd class hard wood including polishing (two or more coats) over a coat of wood filler after preparation of surface.

Removing of old unserviceable foot rest of bed & replacement of foot rest made as per existing size and shape or as per Drg IInd class hard wood including polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked all as shown in Drg

Removing of old wooden stiffener and replacement of new wooden stiffner of IInd class Hard wood stiffener of size 50x60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc.

Taking out old unsv long rail of bed plywood and replacement of new long rail of IInd class hard wood of existing shape and size all as specified and Drg including polishing two or more coats over a coat of wood filler after preparation of surface etc.

TEAPOY VARANDAH

Taking down old U/S top of teapoy varandah and replacement of new top of teapoy verandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

PEG TABLE

Removing unserviceable top of Peg table but replacement of new top of 18/19mm thick particle board BWR type Gde-I as per Drg ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.

Removing unserviceable/broken leg of peg table and replacement of new leg made of IInd class hard wood all as per Drg or existing pattern and polishing with French polish (Two or more coats) over a coat of wood filler after preparation of surface etc.

Taking out old unserviceable/broken long rail of frame and replacement of new long rail of IInd class hard wood planned & finishing smooth of existing shape and size complete all as specified.

Taking out old unserviceable/broken short rail of frame and replacement of new long rail of IInd class hard wood planned & finishing smooth of existing shape and size complete all as specified.

TABLE DINING 1200 mm x 900 mm Removing the following unserviceable components of Table dinning 1200 mm x 900 mm and replacing the same with new one IInd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing :

Top of size 1200 mm x 900 mm made of 18/19 mm thick pre laminated particle board of approved shade including 4 mm thick teakwood edging around.

Leg made of IInd class hardwood of size and shape as per drg.

Short rail of size and shape as per drg.

Long rail of size and shape as per drg

TABLE DINING 6 PERS

Taking out old unserviceable top from table dining 6 pers and replacement of new top of 18/19 mm thick pre laminated particle board exterior grade and provided teak wood beading 4 mm thick around fixed with suitable size 4 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed.

Taking out old unserviceable leg from table dining 6 persons and replacement of new leg of II nd Class hard wood all as shown on drg and directed by EIC.

Taking out old unserviceable long rail from table dining 6 pers and replacement of new long rail of II nd class hard wood all as shown on drg and directed by EIC.

Taking out old unserviceable short rail from table dining 6/8 pers and replacement of new short rail of II nd class hard wood all as shown on drg and directed by EIC

TABLE DINING 8 PERS

Taking out old unserviceable top from table dining 8 pers and replacement of new top of 18/19 mm thick exterior grade and provided teak wood beading 4 mm thick around fixed with suitable size 4 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed.

Taking out old unserviceable long rail from table dining 8 pers and replacement of new long rail of II nd class hard wood all as shown on drg and directed by EIC.

CHAIR DINNING OFFER'S Removing the following unserviceable components of chair Dinning offer's and replacing the same with new one II nd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing :

Front leg (left or right )

Replacement of rear leg (left or right ) all as directed by EIC.

Side Rail .

Front Rail.

Bottom stiffener.

Rest vertical strip

Cushioned seat top of chair dining with 75 mm thick 32 density foam covered with tapestry cloth not less than Rs 250 /- per metre as approved on seat of 12 mm commercial plywood BWP grade. including tightening of frame work as shown on drg.

PVC shoes of chair dining with new one with scew of superior quality all as shown on drg.

Replacement of old tapestry cloth with new tapestry cloth of superior quality ( cloth not less than Rs 250/- per metre) and fixing appropriately as shown on drg

CHAIR EASY Removing the following unserviceable components of chair Easy and replacing the same with new one II nd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing and as directed by EIC.

Front leg (left or right)

Rear leg (left and right).

Arms rest.

Front/rear rail for seat.

Side rail for back

Shoes with new PVC shoe of superior quality with steel scre of suitable size complete.

Re-canning of chair easy

CHAIR WRITING Removing the following unserviceable components of chair writing and replacing the same with new one II nd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing and as directed by EIC.

Front leg (left or right )

Rear leg (left or right) .

Back stiffener.

Bottom stiffener.

Arm rest

PVC shoe of superior quality with steel screw of suitable size complete.

Re canning of chair writing

CHAIR DINNING

Front leg (left or right )

Rear leg (left or right) .

Front/rear/side rail

Back stiffener.

PVC shoe of superior quality with steel screw of suitable size complete.

Re canning of chair writing

PVC Seat with New PVC Seat of superior quality with steel screw suitable size of chair dinning.

SOFA SET 5 SEATER

Removing of existing U/S cushion from sofa set five seater and S&F foam 95 to 100 mm thick 40 density duly covered with superior quality tapestry cloth (Not less than Rs. 250/Per Mtr) as directed by Engr-in-Charge.

Removing of existing old tapestry cover from cushion 210x220 mm 4'' thick and S&F New tapestry cover duly stitched ( Tapestry cloth not less than Rs. 260 /- per Mtr ) as directed by Engr-in-Charge

Removing of existing unserviceable front/rear rail wooden of sofa set 5 seater and S&F new Front/Rear wooden rail made of IInd class hard wood and polishing with French polish two or more coats over a coat of wood filler after preparation of surface and as directed by Engr-in-Charge.

Removing of existing unserviceable stiffener/bearer wooden and S&F new stiffener/bearer wooden made of IInd class hard wood and polishing with french polish two or more coats over a coat of wood filler after preparation of surface and as directed by Engr-in-Charge

Removing of existing unserviceable Arm rest wooden and S&F Arm rest wooden made of IInd class hard wood and polishing with French polish two or more coats over a coat of wood filler after preparation of surface and as directed by Engr-in-Charge.

TABLE 900 X 900 X 760MM

Removing of old unserviceable table top and provision of new table top made of pr-laminated particle board 18/19mm thick BWR, interior grade including 4 mm thick teak wood beading around the table top as specified and shown on drawing and as directed by Engr-in-charge.

Removing of old unserviceable leg and replacement of new leg of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge.

Removing of old unserviceable rail and replacement of new rail of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge.

TEAPOY WOODEN

Removing unserviceable top of teapoy and Replacement new top of 18/19mm thick particle board BWR type Gde-I as per Drg ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.

Removing unserviceable/broken stiffener/long rail of teapoy replacement with new stiffener/long rail /side rail made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.

Removing unserviceable side rail of teapoy replacement with new side rail made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc

Removing unserviceable leg of teapoy replacement with new leg made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.

TABLE CENTRE

Taking down old unserviceable top of table centre and replacement of new top of table centre made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

Removing of old unserviceable long rail of Table Centre & replacement of new long rail made as per existing size and shape or as per Drg IInd class hard wood including polishing two or more coats of over a coat of wood filler after preparation of surface

Removing of old unserviceable Short Rail of Table Centre & replacement of new short Rail made as per existing size and shape or as per Drg IInd class hard wood including polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable leg of Table Centre & replacement of new leg made as per existing size and shape or as per Drg IInd class hard wood including polishing two or more coats of over a coat of wood filler after preparation of surface

TABLE WRITING

Removing old unserviceable top and replacement of new top made of particle board 18/19mm thick commercial BWR Gde I of the size and shape a per Drg ISI Marked with IInd class HW teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc

Removing of old unserviceable back ply of table writing and replacement of new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified and shown on drawing

Removing old unserviceable leg of tables & Replacement with new leg made out with IInd class hard wood all as per Drg or of existing pattern polishing with French polish (two or more coats) over a coat of wood filler etc

SIDE BOARD

Removing of old unserviceable/broken existing back of side board and replacement of new back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing.

Removing of old unserviceable/broken existing and replacement Magnetic catch spring for shutter

Removing of old unserviceable/broken bottom of side board and replacement of new side of 18/19mm thick particle board BWR interior grade as per existing shape and size including 1mm thick sunmica sheet to external surface of particle board of side board complete all as specified and shown in drawing & ISI Marked

Removing of old unserviceable/broken shelf of side board and replacement new shelf of IInd class hard wood existing shape and size duly planned and smooth complete all as specified and shown on drawing and as directed by Engr-in-Charge.

Removing of old unserviceable/broken top but replacement new top of 18/19mm thick particle board as per existing shape and size including 1 mm thick sunmica sheet to external surface of particle board complete all as specified and shown on drawing and as directed by Engr-in-charge.

Removing of old unserviceable/broken existing drawer of side board and replacement of new drawer of IInd class hard wood of existing shape and size ( 7 inch x 15 inch x 0.5 inch) duly planned and smooth complete all as specified and shown in drawing.

TV TROLLEY Removing the following unserviceable components of TV Trolley and replacing the same with new one pre-laminated particle board duly finished of size and shape as shown as per Drg and as directed by Engr-in-Charge

Top of size 750 mm x 600 mm made of 18/19 mm thick pre-laminated particle board of approved shade including 4 mm thick teakwood edging around

Sides of size 500 mm x 682 mm made of 18/19 mm thick prelaminated particle board of approved shade (Interior grade).

Back of size 500 mm x 682 mm made of 18/19 mm thick prelaminated particle board of approved shade

Shutter of size as per existing drg made of 5 mm thick glass shutter openable with magnetic catcher

Replacement of Caster 50 mm dia swivel type

TABLE BED SIDE Removing the following unserviceable components of Table bed side and replacing the same with new components as shown as per drawing and as directed by Engr-in-Charge

Top of size 450 x 450 mm made of 18/19 mm thick pre laminated particle board of existing shade including 4 mm thick teakwood edging around

Side of size 450 mm x 432 mm made of 18/19 mm thick pre laminated particle board of existing shade.

Bottom of size 450 x 450 mm made of 06 mm ply wood of table bed side

Back of size 500 x 450 mm made of 6 mm thick ply wood and 414 mm X 100 mm ,18 mm thick prelaminated particle board piece in between the frame as per drg

Drawer of size 414 x 100 mm made of 18 mm thick particle board with 6 mm thick ply wood bottom as per drawing

Handle of size 75 mm of superior quality for table bed side.

Telescopic channels with new telescopic channel and fixing as directed by EIC

REPAIR TO TABLE DRESSING GENTS

Dismantling taking out carefully and replacement of old existing broken top of table dressing gents of any description in any position & replacement of the same with replacement of new top of 01mm thick laminated sheet of approved shade over particle board 12mm thick and including 6mm thick teak wood beading all round made to shape fixed in position pasted with 01mm thick laminated sheet on top all as shown on drawing. Specified and directed by the Engr-in-Charge.

Dismantling taking out carefully and replacement of side replacement of new side of 12 mm thick particle board, one side teak veneered and other side commercial exterior grade BWP with and including 6 mm thick teak wood beading all-round , made to shape fixed in position all as shown on drg, specified and directed by the Engr-in-charge.

Dismantling taking out carefully and replacement of bottom with replacement of new 12 mm thick ply, teak veneered on one side and commercial on other side grade with (BWR Resin) made to shape fixed in position all as shown on drg specified and directed by the Engr-in-Charge complete

Dismantling taking out carefully and replacement of mirror with replacement of new mirror with teak wood frame 5.5mm thick mirror complete all as shown on drawing and directed by Engr-in-Charge

Dismantling taking out carefully and replacement of chromium plate knob 25 mm dia of best quality and as approved by Engr-in-Charge.

TABLE DRESSING LADIES

Dismantling taking out carefully and replacement of old existing broken top of table dressing ladies of any description in any position & replacement of the same with replacement new top of 18/19 mm thick pre-laminated particle board exterior grade, BWR ISI Marked , made to shape fixed in position with teak wood veneered on one side & other side commercial all as shown on drawing . specified and as directed by Engr-in-charge.

Dismantling taking out carefully and replacement of back plywood 6mm thick commercial ply all as specified and as directed by Engr in Charge .

M&L Preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed

Dismantling taking out carefully and replacement of chromium plate knob 25mm dia of best quality and as approved by Engr in charge

TABLE COMPUTER Removing the following unserviceable components of Table computer and replacement with new components duly finshed complete all as shown in drg and directed.

Top of size 900 mm x 562 mm made of 18/19 mm thick prelaminated particle board including 4 mm thick teakwood edging around

Key board Tray of size 450 x 480 mm on telescopic channel made of 18/19 mm thick prelaminated particle board including 4 mm thick teakwood edging around

Mouse tray of size as per drg on telescopic channel made of 18/19 mm thick prelaminated particle board including 4 mm thick teakwood edging around

Drawer of size as per drg on telescopic channel made of 18/19 mm thick prelaminated particle board including 4 mm thick teakwood edging around

Shelf of size 450 mm x 300 mm made of 18/19 mm thick prelaminated particle board including 4 mm thick teakwood edging around.

Shelf of size 230 mmx 300 mm vertical made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging around

Bottom of size 700 mm x 300 mm made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging around.

Side of size 632 mm x 150 mm made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging around

M&L preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following :-

Bed with ply wood top

Chair writing

Chair Easy

Chair dining

Table writing

Side Board

Table 900x900x760mm wooden

Table dressing gents with mirror

Table dressing ladies with mirror

Table centre with sunmica top

Table bed side

Sofa Set 5 Seater (3+1+1)

Sofa Chair Single seater

Teapoy

Table Peg

Table dining 6/8 Pers

PRAFUL ENTERPRISES (BID ID -3393866)

Pratik Enterprise (BID ID -3392895)

SK INDUSTRIES (BID ID -3389906)