Construction of 10MVA, 33/11 KV receiving station at Nabug Larnoo Kokernag (Civil Part)

Protection wall by way of Gabion structures Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying of hand Packed stone soling including all carriages complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing and reinforcement.All work upto plinth level in 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size) .

Carriage of sand aggrefates by M/T within avg lead of 35 km

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinic+PVC coated, Mesh wire diameter2.7/3.7mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm (ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of Engineer-in-charge

Compound Walling with Gate Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of hand Packed stone soling including all carriages complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) crushed

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Carriage of sand aggregates by M/T within avg lead of 35 km

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centring and shuttering incld. Strutting, proping etc & removal of form work for columns,pillars piers , abutments posts etc,

Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding i/c all leads and carriages complete (Thermo-mechanically treated bars)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.i.c all carriages MT & HL complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. Made of G.I. wire of dia 4 mm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats).

Landscaping including soil filling Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth.

Providing and laying of RBM (River Bed Material) for leveling, including spreading, watering, ramming, and compacting in layers not exceeding 15 cm in thickness to required levels and grades, complete as per directions of Engineer-in-Charge.

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)

CONSTRUCTION OF CONTROL ROOM BUILDING AT LARNOO NABUG Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m width or 10 sqm on plan), including dressing of sites and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying of hand Packed stone soling including all carriages complete job

Providing and laying in position cement concrete of 1:4:8 ratio including curing but excluding cost of centering shuttering and carraige. All work upto plinth level using coarse sand and 40mm nominal size aggregates complete job.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing and reinforcement.All work upto plinth level in 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts.

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone (with bond stone)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in super structure above plinth level upto floor five level

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Foreign wood in scantling of: imported wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). imported wood

providing and fixing of glass panes 3.5 mm (weight not less than 8.75 kg/sqm) of ordinary glass panes windows and clerestory window shutters

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Imported wood 30 mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second class kail wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size).

12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etccomplete job

6 mm thick cement plaster to Ceiling of 1:3 mix ( 1 cement: 3 coarse sand) complete job

Providing and fixing of 12 mm thick plywood of approved make and manufacture for walls and ceiling including necessary nail screw all lead,lift scaffolding carriage upto site complete job

Providing and fixing of imported wood 12mm thick T&G readymade panelling finished surface(walls) including all Fixtures ,carriage as per the directions of engineer incharge

Providing and applying French spirit polishing, Two or more coats on new works including a coat of wood filler.Complete job

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(2 mm thick)

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 18 mm thick

Providing edge moulding to 18 mm/16 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. On wood work

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 100 mm Handle

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 200 mm Handle

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 100x10mm Tower bolts

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 150x10mm Tower bolts

Providing and fixing of bright finished brass hardware fittings with screws etc. complete Stay Hooks

Providing and fixing of bright finished brass hardware fittings with screws etc. complete L-Dop 18" with inbuilt Locking System

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china orissa pattern W.C. pan of size 580x440 mm.

Providing and fixing flat back Washbasin with Pedastal. of approved quality as per directions of Engineer Incharge) Complete job

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wall wherever required :Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing and fixing of Centre hole basin mixer for wash basin of approved quality as per directions of Engineer Incharge.Complete job

Providing and Fixing of CP Angle Valve of approved quality as per directions of Engineer Incharge.Complete job

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing of Towel Hanger/Towel Stand of approved make and brand as per directions of site incharge

Providing and fixing of Soap Holder of approved make and brand as per directions of site incharge

Providing and fixing of glass Corner Shelves of approved make and brand as per directions of site incharge

Providing and fixing of popup waste coupling of standard quality. Complete job

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing PVC waste pipe for sink and wash basin including PVC waste fittings complete

Providing and fixing of geysers of approved make and brand of approved quality as per directions of Engineer Incharge) incl all fixtures compete job. 50 Litres

Providing and fixing of bib cocks for bath rooms of approved quality as per directions of Engineer Incharge. Complete job

Providing and fixing Pvc Water Storage tank of approved brand including Ball Cock with all necessary fittings and fixtures complete job

Providing and fixing Polyvinyl Chloride (PVC) pipes of approved make and brand including all fittings and fixtures complete job as per direction of Engineer-in-charge including trenching,refilling etc. 110 mm Dia

Providing and fixing Polyvinyl Chloride (PVC) pipes of approved make and brand including all fittings and fixtures complete job as per direction of Engineer-in-charge including trenching,refilling etc. 75 mm Dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 20 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm dia. nominal bore

Constructing masonry Chamber 30x30x30 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand)with necessary pvc cover with frame or cover slab in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5

Structural steel work welded in built up sections, trusses(including soffit and eaves board) and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing & fixing Precoated galvalume profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fastners & Fixing flashings, valleys and ridges of colour coated galvalume plain sheet using self drilling and self tapping fasteners of reputed makel complete and as directed. The contractor shall give a minimum of 10 years guarantee for sheets against deterioration, disintegrations loss of luster, variation in colour, etc. and leakages across laps, fasteners etc. All types of steel sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer-in-Charge. Fasterners shall also be load tested. The Contractor is to submit design and shop drawings for approval on the sheet profile, design and fabrication details before installation (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and groutedwith fine sand including finishing the top smooth and curing complete

Providing fixing in position polyethylene septic tank type b ( comfort or equivalent) having capacity for 35 uses 119"X47"X51"` inches in size including excavation of put as per the size, laying of 150mm thick bed concrete in 1:4:8 mix (1: cement :4 course sand : 8 graded Nos stone agg 20mm nominal size ) filling the septic tank with fresh water , connecting the inlet and outlet the septic and filling the dry course of sand and bajre around the septic tank complete job including the carriage ofall materials involved.

Carriage of material by mechanical transport from source of supply upto site of work Sand 35 kms

Carriage of material by mechanical transport from source of supply upto site of work Aggregate 35 kms

Carriage of material by mechanical transport from source of supply upto site of work Stone 5 kms

Carriage of material by mechanical transport from source of supply upto site of work Bricks 45 kms

CONSTRUCTION OF JE/SBA QUARTER AT LARNOO NABUG Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m width or 10 sqm on plan), including dressing of sites and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying of hand Packed stone soling including all carriages complete job

Providing and laying in position cement concrete of 1:4:8 ratio including curing but excluding cost of centering shuttering and carraige. All work upto plinth level using coarse sand and 40mm nominal size aggregates complete job.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing and reinforcement.All work upto plinth level in 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone (with bond stone)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in super structure above plinth level upto floor five level

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Foreign wood in scantling of: Imported wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). imported wood 30 mm

providing and fixing of glass panes 3.5 mm (weight not less than 8.75 kg/sqm) of ordinary glass panes windows and clerestory window shutters

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). imported wood 30 mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second class kail wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size).

12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etc complete job

6 mm thick cement plaster to Ceiling of 1:3 mix ( 1 cement: 3 coarse sand) complete job

Providing and fixing of 12 mm thick plywood of approved make and manufacture for walls and ceiling including necessary nail screw all lead,lift scaffolding carriage upto site complete job

Providing and fixing of imported wood 12mm thick T&G readymade panelling finished surface(walls) including all Fixtures ,carriage as per the directions of engineer incharge

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Pahal Gardan

Providing and applying French spirit polishing, Two or more coats on new works including a coat of wood filler.Complete job

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(2 mm thick)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 18 mm thick

Providing edge moulding to 18 mm/16 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work

Providing and applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. On wood work

P/F of wooden flooring of A class Laminated wood flooring 8mm thick fixed on foam with proper resin material as per sample NF-84A beeding and door profiles

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 100 mm Handle

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 200 mm Handle

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 100x10mm Tower bolts

Providing and fixing of bright finished brass hardware fittings with screws etc. complete 150x10mm Tower bolts

Providing and fixing of bright finished brass hardware fittings with screws etc. complete Stay Hooks

Providing and fixing of bright finished brass hardware fittings with screws etc. complete L-Dop 18" with inbuilt Locking System

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.(Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge)

Providing and fixing flat back Washbasin with pedastal. (Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge) Complete job

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wall wherever required :Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing and fixing of Centre hole basin mixer for wash basin of approved quality as per directions of Engineer Incharge.Complete job

Providing and Fixing of CP Angle Valve of approved quality as per directions of Engineer Incharge.Complete job

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing of Towel Hanger/Towel Stand of approved make and brand as per directions of site incharge

Providing and fixing of Soap Holder of approved make and brand as per directions of site incharge

Providing and fixing of glass Corner Shelves of approved make and brand as per directions of site incharge

Providing and fixing of popup waste coupling of standard quality. Complete job

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing PVC waste pipe for sink and wash basin including PVC waste fittings complete

Providing and fixing of geysers of approved make and brand ( Racold, Havells,Jaquar or of approved quality as per directions of Engineer Incharge) incl all fixtures compete job. 35 Litres

Providing and fixing of bib cocks for bath rooms of approved quality as per directions of Engineer Incharge. Complete job

Providing and fixing Pvc Water Storage tank of approved brand including Ball Cock with all necessary fittings and fixtures complete job

Providing and fixing Polyvinyl Chloride (PVC) pipes of approved make and brand including all fittings and fixtures complete job as per direction of Engineer-in-charge including trenching,refilling etc. 110 mm Dia

Providing and fixing Polyvinyl Chloride (PVC) pipes of approved make and brand including all fittings and fixtures complete job as per direction of Engineer-in-charge including trenching,refilling etc. 75 mm Dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 20 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm dia. nominal bore

Constructing masonry Chamber 30x30x30 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand)with necessary pvc cover with frame or cover slab in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5

Structural steel work welded in built up sections, trusses(including soffit and eaves board) and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing & fixing Precoated galvalume profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fastners & Fixing flashings, valleys and ridges of colour coated galvalume plain sheet using self drilling and self tapping fasteners of reputed makel complete and as directed. The contractor shall give a minimum of 10 years guarantee for sheets against deterioration, disintegrations loss of luster, variation in colour, etc. and leakages across laps, fasteners etc. All types of steel sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer-in-Charge. Fasterners shall also be load tested. The Contractor is to submit design and shop drawings for approval on the sheet profile, design and fabrication details before installation (including cost of all material, leads, lifts and carriages etc upto site of work complete). hi-rib

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and groutedwith fine sand including finishing the top smooth and curing complete

Flash Rolled Pointing on Brickwork with 1:2:1 ( 1 Non Hydrated line, 2 Sand, 1 surkhi) as per the conservation methodology procedure including dressing of Brickwork and Scafolding etc complete job

Providing fixing in position polyethylene septic tank type b ( comfort or equivalent) having capacity for 35 uses 119"X47"X51"` inches in size including excavation of put as per the size, laying of 150mm thick bed concrete in 1:4:8 mix (1: cement :4 course sand : 8 graded Nos stone agg 20mm nominal size ) filling the septic tank with fresh water , connecting the inlet and outlet the septic and filling the dry course of sand and bajre around the septic tank complete job including the carriage ofall materials involved.

Carriage of material by mechanical transport from source of supply upto site of work Sand 35 kms

Carriage of material by mechanical transport from source of supply upto site of work Aggregate 35 kms

Carriage of material by mechanical transport from source of supply upto site of work Stone 5 kms

Carriage of material by mechanical transport from source of supply upto site of work Bricks 45 kms

Construction of Approach road Earth work in excavation by Mechanical means in foundation trenches, drains, pipes and cables etc.(not exceeding 1.5 Mtr. In width or 10 SqMts on plan) including dressing of sides and ramming of bottoms, lift upt 1.5 Mtr. Including getting out excavated soil and disposal of surplus soil as directed and lead up to 50 Mtrs

Providing and laying of hand Packed stone soling including all carriages complete job

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) i/c carriage upto 35 km by MT

Providing and layingin position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring ,shuttering .All works upto plith level., i/c carriage upto 35 km by MT

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Carriage of sand aggregates by M/T within avg lead of 35 km

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars

Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns

P/Laying of RBM having P.I not more than 6 incl. spreading in layers not exceeding 150mm compacted thickness consolidated by 8-10 ton power road roller at OMC to achive 908% of Max. dry density as per IS 2720 to the required and grade as per specifications with CBR value not less than 20 incl. all leads and carriage.

Providing & Laying water bound macadam with specified stone aggregate stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete including cost stone aggregate, screenings, kankar, moorum and red bajri etc.i/c carriage by MT 40km, complete job Base course with 63 mm to 45 mm size including stone screenings 13.2 mm size

P/L of RCC Spun pipes incd Excavation laying in position providing adequate coushio and gradient incl. all carriage ( complete job) at req. spots 914.4 mm dia