Construction of Executive quarters (16 quarters) and Non-executive (32 quarters) quarters at Gua Ore Mines, Jharkhand

ABSTRACT OF COST

Name of the work :Construction of 16 nos quarters for executives and 32 nos quarters for non

executives along with all aminities at Gua Ore Mines, Jhakhand.

S.H. No. Description of Sub-Head DSR 2021/ 2022 Non-DSR

Amount (Rs) Amount (Rs)

1 Building Civil Works : 13,63,96,989 9,216

2 Electrical Works : 1,54,24,618 1,12,57,614

3 Plumbing Works : 66,90,429 98,18,298

4 Fire Fighting Works : 18,77,221 3,55,208

External Development Civil Works

5 including horticulture and open gym : 1,38,32,266 7,38,592

6 Dismantling works : 5,60,002

Digitally signed by PRIYA

ABSTRACT OF COST

Name of the work : Constrcution of 16 Executive Flats & 32 Non Executive Flats for

SAIL, GOM, Jharkhand

Sl.No. Description of Sub-Head Amount (Rs) DSR Amount (Rs) NS

1 Earth Work : 29,27,909.39

2 Concrete Work : 35,19,730.00

3 Reinforced Cement Concrete : 6,05,15,341.00

4 Masonry Work : 1,86,22,265.00

5 Cladding Work : 33,52,450.00

6 Steel Work : 33,77,156.00

11 Aluminium Work : 62,29,564.00

12 Water Proofing : 36,06,291.00

Digitally signed by PRIYA

Name of the work : Constrcution of 16 Executive Flats & 32 Non Executive Flats for SAIL, GOM, Jharkhand

BOQ of Building Civil Works

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

Sub-Head : Earth Work

2.6 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50m and lift up to 1.5m,as

directed by Engineer-in-Charge.

1 2.6.1 All kinds of soil One Cubic

2.7 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30 cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50 m and lift up to 1.5m, as

directed by Engineer-in-Charge.

2 2.7.1 Ordinary rock One Cubic

3 2.25 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift One Cubic

4 2.25A Excavating, supplying and filling of local earth (including

royalty) by mechanical transport up to a lead of 5 km,

also including ramming and watering of the earth in

layers not exceeding 20 cm in trenches, plinth, sides of One Cubic

foundation etc., complete. 661.77 Cum 599.7 Metre 396863.00

2.26 Extra for every additional lift of 1.5 m or part thereof in

excavation /banking excavated or stacked materials.

6 2.26.1 All kinds of soil. One Cubic

7 2.26.2 Ordinary or hard rock. One Cubic

8 2.27 Supplying and filling in plinth with sand under floors,

including watering, ramming, consolidating and dressing One Cubic

complete. 282.00 Cum 2298 Metre 648036.00

2.34 Supplying chemical emulsion in sealed containers

including delivery as specified.

9 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

2.35 Diluting and injecting chemical emulsion for PRE

CONSTRUCTIONAL anti- termite treatment (excluding

the cost of chemical emulsion) :

2.35.3 Treatment of soil under existing floors using chemical

emulsion @ one litre per hole, 300 mm apart including

drilling 12 mm diameter holes and plugging with cement

mortar 1 :2 (1 cement : 2 Coarse sand) to match the

existing floor :

10 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% One Square

concentration. 1855.49417 Sqm 272.36 Metre 505362.39

Total of the Sub-Head - Earth Work : 2927909.39

Sub-Head : Concrete Work

4.1 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

11 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from

natural sources : 8 graded stone aggregate 40 mm One Cubic

nominal size derived from natural sources). 193.99 Cum 6726.44 Metre 1304881.00

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

12 4.11 Providing and laying damp-proof course 50mm thick

with cement concrete 1:2:4 (1 cement : 2 coarse sand

(zone-III) derived from natural sources : 4 graded stone

aggregate 20mm nominal size derived from natural One Square

sources). 256.25 Sqm 480.88 Metre 123226.00

13 4.12 Extra for providing and mixing water proofing material per bag of 50

in cement concrete work in doses by weight of cement kg cement

as per manufacturer’s specification. 82.00 units 15.95 used 1308.00

14 4.13 Providing and applying a coat of residual petroleum

bitumen of grade of VG-10 of approved quality using 1.7

kg per square metre on damp proof course after

cleaning the surface with brushes and finally with a piece One Square

of cloth lightly soaked in kerosene oil. 256.25 Sqm 121.06 Metre 31022.00

15 4.17 Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone-III)

derived from natural sources : 6 graded stone aggregate

20 mm nominal size derived from natural sources) over

75mm thick bed of dry brick ballast 40 mm nominal size,

well rammed and consolidated and grouted with fine

sand, including necessary excavation leveling & dressing

& finishing the top smooth. One Square

16 4.1.6 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from

natural sources : 6 graded stone aggregate 40 mm One Cubic

nominal size derived from natural sources). 233.63 Cum 7092.48 Metre 1657029.00

Total of the Sub-Head - Concrete Work : 3519730.00

Sub-Head : Reinforced Cement Concrete

17 5.3 Reinforced cement concrete work in beams, suspended

floors, roofs having slope up to 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above plinth level up to

floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with 1:1.5:3 (1

cement : 1.5 coarse sand(zone-III)derived from natural

sources : 3 graded stone aggregate 20 mm nominal

sizederived from natural sources). One Cubic

5.9 Centering and shuttering including strutting, propping

etc. and removal of form for :

18 5.9.1 Foundations, footings, bases of columns, etc. for mass One Square

concrete 531.84 Sqm 353.12 Metre 187803.00

19 5.9.2 Walls (any thickness) including attached pilasters, One Square

butteresses, plinth and string courses etc. 54.00 Sqm 746.44 Metre 40308.00

20 5.9.4 Shelves (Cast in situ) One Square

21 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts One Square

22 5.9.7 Stairs, (excluding landings) except spiral-staircases One Square

23 5.9.20 Suspended floors, roofs, landings, balconies and access One Square

platform with water proof ply 12 mm thick 4273.75 Sqm 907.79 Metre 3879666.00

24 5.9.21 Lintels, beams, plinth beams, girders, bressumers and One Square

cantilevers with water proof ply 12 mm thick 6163.72 Sqm 743.73 Metre 4584141.00

5.18 Providing precast cement concrete Jali 1:2:4 (1 cement :

2 coarse sand(zone-III) : 4 graded stone aggregate 6mm

nominal size ), reinforced with 1.6 mm dia mild steel

wire, including centering and shuttering, roughening

cleaning, fixing and finishing in cement mortar 1:3 (1

cement: 3 fine sand) etc. complete, excluding plastering

of the jambs, sills and soffits.

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

25 5.18.1 50 mm thick One Square

5.22 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

26 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or

more. 75112.02 Kg 95.32 One Kilogram 7159678.00

5.22A Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete above plinth level.

27 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or

more. 212384.10 Kg 95.32 One Kilogram 20244453.00

28 5.30 Add for plaster drip course/ groove in plastered surface

or moulding to R.C.C. projections 280.00 m 68.8 One Metre 19264.00

5.33 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland

Pozzolana/ Ordinary Portland/ Portland Slag cement,

admixtures in recommended proportions as per IS: 9103

to accelerate/ retard setting of concrete, to improve

durability and workability without impairing strength;

including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering,

shuttering, finishing and reinforcement as per direction

of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable

separately. In case the cement content in design mix is

more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement

5.33.1 All works upto plinth level

29 5.33.1.1 Concrete of M25 grade with minimum cement content One Cubic

30 5.33.1.2 Concrete of M30 grade with minimum cement content One Cubic

5.33.2 All works above plinth level upto floor V level

31 5.33.2.1 Concrete of M25 grade with minimum cement content One Cubic

32 5.33.2.2 Concrete of M30 grade with minimum cement content One Cubic

33 5.35 Add for using extra cement in the items of design mix

over and above the specified cement content therein.

710.16 Qtl 732.03 One Quintal 519858.00

34 5.38 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level One Cubic

for each four floors or part thereof. 16.35 Cum 298.73 Metre 4883.00

Total of the Sub-Head - Reinforced Cement Concrete : 60515341.00

Sub-Head : Masonry Work

6.1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth

35 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) One Cubic

6.4 Brick work with non modular fly ash bricks conforming

to IS:12894, class designation 10 average compressive

strength in super structure above plinth level up to floor

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

36 6.34.1 Cement mortar 1:4 (1 cement : 4 coarse sand) One Cubic

37 6.5 Extra for brick work / AAC block masonry / Tile brick

masonry in superstructure above floor V level, for each

four floors or part thereof by mechanical means. One Cubic

6.12 Half brick masonry with common burnt clay F.P.S. (non

modular) bricksof class designation 7.5 in foundations

and plinth in :

38 6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) One Square

39 6.15 Extra for providing and placing in position 2 Nos 6mm

dia. M.S. bars at every third course of half brick One Square

masonry.ird course of half brick masonry. 3375.55 Sqm 91.92 Metre 310281.00

Total of the Sub-Head - Masonry Work : 18622265.00

Sub-Head : Cladding Work

8.2 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias

and similar locations of required size,approved shade,

colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete

8.2.2 Granite stone slab colour black, Cherry/Ruby red

40 8.2.2.1 Area of slab upto 0.50 sqm One Square

41 8.2.2.2 Area of slab over 0.50 sqm One Square

8.2.3 Granite stone slab all colour and texture except black,

Cherry/ Ruby red

42 8.2.3.1 Area of slab upto 0.50 sqm One Square

43 8.2.3.2 Area of slab over 0.50 sqm One Square

8.3 Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to

edge to give high gloss finish etc. complete as per design

approved by Engineer-in-Charge.

44 8.3.2 Granite work 10.00 m 445.36 One Metre 4454.00

45 8.4 Extra for fixing marble /granite stone, over and above

corresponding basic item, in facia and drops of width

upto 150 mm with epoxy resin based adhesive, including

cleaning etc. complete. 268.00 m 505.65 One Metre 135514.00

46 8.5 Extra for providing opening of required size & shape for

wash basin/kitchen sink in kitchen platform, vanity

counter and similar location in marble/ Granite/ stone

work, including necessary holes for pillar taps etc.

including moulding, rubbing and polishing of cut edges

etc. complete 48.00 No. 859.31 Each 41247.00

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

47 8.31 Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approvedmake, in all colours, shades

except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade One Square

complete. 2201.12 Sqm 1130.77 Metre 2488960.00

Total of the Sub-Head - Cladding Work : 3352450.00

Sub-Head : Wood and P.V.C. Work

9.119 Providing and fixing factory made P.V.C. door frame of

size 50x47 mm with a wall thickness of 5 mm, made out

of extruded 5mm rigid PVC foam sheet, mitred at

corners and joined with 2 Nos of 150 mm long brackets

of 15x15 mm M.S. square tube, the vertical door frame

profiles to be reinforced with 19x19 mm M.S. square

tube of 19 gauge, EPDM rubber gasket weather seal to

be provided through out the frame. The door frame to

be fixed to the wall using M.S. screws of 65/100 mm

size, complete as per manufacturer’s specification and

direction of Engineer-in-Charge.

9.120 Providing and fixing factory made panel PVC door

shutter consisting of frame made out of M.S. tubes of 19

gauge thickness and size of 19 mm x 19 mm for styles

and 15x15 mm for top & bottom rails. M.S. frame shall

have a coat of steel primers of approved make and

manufacture. M.S. frame covered with 5 mm thick heat

moulded PVC ‘C’ channel of size 30mm thickness, 70 mm

width out of which 50 mm shall be flat and 20 mm shall

be tapered in 45 degree angle on both side forming

styles and 5 mm thick, 95 mm wide PVC sheet out of

which 75 mm shall be flat and 20 mm shall be tapered in

45 degree on the inner side to form top and bottom rail

and 115 mm wide PVC sheet out of which 75 mm shall

be flat and 20 mm shall be tapered on both sides to

form lock rail. Top, bottom and lock rails shall be

provided both side of the panel. 10 mm (5 mm x 2 )

thick, 20 mm wide cross PVC sheet be provided as gap

insert for top rail & bottom rail, paneling of 5 mm thick

both side PVC sheet to be fitted in the M.S. frame

welded/ sealed to the styles & rails with 7 mm (5 mm+2

mm) thick x 15 mm wide PVC sheet beading on inner

side, and joined together with solvent cement adhesive.

An additional 5 mm thick PVC strip of 20 mm width is to

be stuck on the interior side of the ‘C’ Channel using PVC

solvent adhesive etc. complete as per direction of

Engineer-in-charge, manufacturer’s specification &

9.120.2 30 mm thick pre laminated PVC door shutters One Square

48 9.21.1 35 mm thick including ISI marked Stainless Steel butt One Square

hinges with necessary screws 595.73 Sqm 2143.35 Metre 1276854.00

49 9.23 Extra for providing lipping with 2nd class teak wood

battens 25 mm minimum depth on all edges of flush

door shutters (over all area of door shutter to be One Square

measured). 595.73 Sqm 426.81 Metre 254263.00

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

9.74 Providing and fixing bright finished brass tower bolts

(barrel type) with necessary screws etc. complete :

9.75 Providing and fixing bright finished brass door latch with

necessary screws etc. complete :

53 9.76 Providing and fixing bright finished brass 100 mm

mortice latch and lock with 6 levers and a pair of lever

handles of approved quality with necessary screws etc.

54 9.82 Providing and fixing bright finished brass hanging type

floor door stopper with necessary screws, etc. complete.

9.127 Providing & Fixing decorative high pressure laminated

sheet of plain / wood grain in gloss / matt / suede finish

with high density protective surface layer and reverse

side of adhesive bonding quality conforming to IS : 2046

Type S, including cost of adhesive of approved quality.

55 9.127.2 1.0 mm thick. One Square

Total of the Sub-Head - Wood And P.V.C Work : 3754963.00

Sub-Head : Steel Work

10.14 Providing and fixing pressed steel door frames

conforming to IS: 4351, manufactured from commercial

mild steel sheet of 1.60 mm thickness, including hinges,

jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25 mm, or base ties of

1.60 mm, pressed mild steel welded or rigidly fixed

together by mechanical means, including M.S. pressed

butt hinges 2.5 mm thick with mortar guards, lock strike-

plate and shock absorbers as specified and applying a

coat of approved steel primer after pre-treatment of the

surface as directed by Engineer-in-charge:

10.14.2 Profile C

56 10.14.2.2 Fixing with carbon steel galvanised dash fastener of

required dia and size (to be paid for separately). 1256.32 m 489.01 One Metre 614353.00

10.14.3 Profile E

57 10.14.3.2 Fixing with carbon steel galvanised dash fastener of

required dia and size (to be paid for separately). 168.00 m 531.7 One Metre 89326.00

10.25 Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer using structural

steel etc. as required.

58 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works. 1998.72 Kg 151.31 One Kilogram 302426.00

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

59 10.28 Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

10.26 Providing and fixing hand rail of approved size by

welding etc. to steel ladder railing, balcony railing,

staircase railing and similar works, including applying

priming coat of approved steel primer.

60 10.26.3 G.I. pipes

971.60 Kg 191.61 One Kilogram 186168.00

10.27 Providing and fixing carbon steel galvanised (minimum

coating 5 micron) dash fastener of 10 mm dia double

threaded 6.8 grade (yield strength 480 N/mm2), counter

sunk head, comprising of 10 mm dia polyamide PA 6

grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-

Total of the Sub-Head - Steel Work : 3377156.00

Sub-Head : Flooring

11.20 Chequerred precast cement concrete tiles 22 mm thick

in footpath &courtyard, jointed with neat cement slurry

mixed with pigment to match the shade of tiles,

including rubbing and cleaning etc. complete, on 20mm

thick bed of cement mortar 1:4 (1 cement: 4 coarse

62 9.20.4 Ordinary cement without any pigment.

11.26 Kota stone slab flooring over 20 mm (average) thick base

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of the slab including

rubbing and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

63 11.26.1 25 mm thick. One Square

64 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting,

dado and pillars laid on 12 mm (average) thick cement

mortar 1:3 (1 cement 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the

shade of the slabs, including rubbing and polishing One Square

complete. 235.04 Sqm 2167.59 Metre 509476.00

65 11.31 Extra for pre finished nosing in treads of steps of Kota

stone/ sand stone slab. 340.80 m 167.31 One Metre 57019.00

66 11.32 Extra for Kota stone/ sand stone in treads of steps and

risers using single length above normal size up to 2.00 One Square

metre . 153.36 Sqm 38.65 Metre 5927.00

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

11.41A Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with

white cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

67 11.41A.1.1 Size of Tile 600 x 600 mm One Square

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

68 11.41A.3.1 Size of Tile 600 x 600 mm One Square

11.46 Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer) with water

absorption less than 0.08 % and conforming to I.S.

15622, of approved make in all colours & shade in

skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1cement: 3 coarse sand), jointing with grey

cement slurry @ 3.3kg/sqm including grouting the joint

with white cement & matching pigments etc. complete.

69 11.46.2 Size of Tile 600x600 mm One Square

Total of the Sub-Head - Flooring : 9670545.00

Sub-Head : Roofing

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 stone aggregate 10 mm and

down gauge), including finishing with cement mortar 1:3

(1 cement : 3 fine sand) as per standard design :

70 12.21.1 In 75x75 mm deep chase One Running

71 12.22 Making khurras 45x45 cm with average minimum

thickness of5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400 micron,

finished with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

12.52 Providing and fixing tiled false ceiling of specified

materials of size 595x595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped

galvanized steel sections ( galvanized @ 120 grams/

sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of

size 24x38 mm made from 0.30 mm thick (minimum)

sheet, spaced at 1200 mm center to center and cross "T"

of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main "T" at 600

mm center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size 24x25

mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200x600 mm panel to form

grids of 600x600 mm and wall angle of size 24x24x0.3

mm and laying false ceiling tiles of approved texture in

the grid including, required cutting/making, opening for

services like diffusers, grills, light fittings, fixtures, smoke

Main "T" runners to be suspended from ceiling using GI

slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to

ceiling with 12.5 mm dia and 50 mm long dash fasteners,

4 mm GI adjustable rods with galvanised butterfly level

clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center

to center along main T, bottom exposed width of 24 mm

of all T-sections shall be pre-painted with polyester

paint, all complete for all heights as per specifications,

drawings and as directed by Engineer-in-charge.

72 12.52.1 GI Metal Ceiling Lay in plain Tegular edge Global white

color tiles of size 595x595 mm, and 0.5 mm thick with 8

mm drop; made of G I sheet having galvanizing of 100

gms/sqm (both sides inclusive) and electro statically

polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending.

Total of the Sub-Head - Roofing : 811090.00

Sub-Head : Finishing

13.1 12 mm cement plaster of mix :

73 13.1.2 1:6 (1 cement: 6 fine sand) One Square

13.2 15 mm cement plaster on the rough side of single or half

brick wall of mix :

74 13.2.2 1:6 (1 cement: 6 fine sand) One Square

75 13.11 18 mm cement plaster in two coats under layer 12 mm

thick cement plaster 1:5 (1 cement: 5 coarse sand)

finished with a top layer 6mm thick cement plaster 1:6 One Square

(1 cement: 6 fine sand). 5012.61 Sqm 470.78 Metre 2359837.00

13.16 6 mm cement plaster of mix :

76 13.16.1 1:3 (1 cement: 3 fine sand) One Square

13.22 Extra for plastering exterior walls of height more than 10

m from ground level for every additional height of 3 m

or part thereof. .

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

80 13.80 Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare One Square

the surface even and smooth complete. 31879.89 Sqm 131.69 Metre 4198262.00

13.50 Finishing walls with Premium Acrylic Smooth exterior

paint with Silicone additives of required shade

81 13.50.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm

over and including priming coat of exterior primer One Square

applied @ 0.90 litre/10 sqm) 5012.61 Sqm 156.78 Metre 785877.00

13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

82 13.61.1 Two or more coats on new work. One Square

13.83 Wall painting with premium acrylic emulsion paint of

interior grade, having VOC (Volatile Organic Compound )

content less than 50 grams/ litre. of approved brand and

manufacture, including applying additional coats

wherever required to achieve even shade and colour.

83 13.83.2 Two coats. One Square

Total of the Sub-Head - Finishing : 20009685.00

Sub-Head : Aluminium Work

21.1 Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up

standard tubular sections/appropriate Z sections and

other sections of approved make conforming to IS: 733

and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required

EPDM rubber/neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P.

brass/ stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid

for separately) :

21.1.1 For fixed portion

84 21.1.1.2 Powder coated aluminium (minimum thickness of

powder coating 50 micron) 1669.44 Kg 495.82 One Kilogram 827740.00

21.1.2 For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately).

85 21.1.2.2 Powder coated aluminium (minimum thickness of

powder coating 50 micron) 4565.15 Kg 588.59 One Kilogram 2686999.00

21.3 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber

/ neoprene gasket etc. complete as per the architectural

drawings and the directions of engineer-in-charge . (Cost

of aluminium snap beading shall be paid in basic item):

86 21.3.3 With float glass panes of 8 mm thickness (weight not One Square

less than 20 kg/sqm) 1335.55 Sqm 1590.86 Metre 2124672.00

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

21.8 Filling the gap in between aluminium frame & adjacent

RCC/ Brick/ Stone work by providing weather silicon

sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-

charge complete.

87 21.8.1 Upto 5mm depth and 5 mm width One Running

21.11 Providing and fixing stainless steel (SS 304 grade)

adjustable friction windows stays of approved quality

with necessary stainless steel screws etc. to the side

hung windows as per direction of Engineer-in-charge

21.15 Providing and fixing aluminium casement windows

fastener of required length for aluminium windows with

necessary screws etc. complete.

89 21.15.2 Powder coated minimum thickness 50 micron

aluminium. 832.00 No. 84.8 Each 70554.00

Total of the Sub-Head - Aluminium Work : 6229564.00

Sub-Head : Water Proofing

22.3 Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed portions of

W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm

mixed with water proofing compound conforming to IS

2645 in recommended proportions including rounding

off junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement :

3 coarse sand) mixed with water proofing compound in

recommended proportion including rounding off

junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen

applied hot at 1.7 kg. per sqm of area.

90 (iv) IVth course of 400 micron thick PVC sheet. (Overlaps

at joints of PVC sheet should be 100 mm wide and

pasted to each other with bitumen @ 1.7 kg/sqm). One Square

22.7 Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc

consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75

kg/sqm of cement admixed with water proofing

compound conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including adjoining

walls upto 300 mm height including cleaning the surface

before treatment.

(b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse sand) admixed

with water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge over 20 mm thick

layer of cement mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-

charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding

of junctions of walls and slabs.

Digitally signed by PRIYA

SL.No Description of Item Quantity Rate (Rs) Unit Amount(Rs)

(c) After two days of proper curing applying a second

coat of cement slurry using 2.75 kg/ sqm of cement

admixed with water proofing compound conforming to

IS : 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless

cement mortar of mix 1:4 (1 cement :4 coarse sand)

admixed with water proofing compound conforming to

IS : 2645 and approved by Engineerin- charge including

laying glass fibre cloth of approved quality in top layer of

plaster and finally finishing the surface with trowel with

neat cement slurry and making pattern of 300x300 mm

square 3 mm deep.

(e) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test.“All above operations to be done in order

and as directed and specified by the Engineer-in-Charge :

91 22.7.1 With average thickness of 120 mm and minimum One Square

thickness at khurra as 65 mm. 1904.00 Sqm 1598.09 Metre 3042763.00

Total of the Sub-Head - Water Proofing : 3606291.00

NS 1 Providing and fixing Stainless steel satin finish (SS-304) (

unless otherwise specified) hardwares including all

necessary screws, nails, adhesive, Cutting in door

frames, shutters, floors and providing all other necessary

fixing arrangement and fixing of all accessories as per

manufacturers specification etc complete as per

direction of Engineer-In-Charge.Master key/Grand

Master Key provisioning for the doors to be given as per

the requirement. 48.00 192 Nos 9216.00

Door viewer with Flap

Total of the Sub-Head Non schedule 9216.00

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: ESTIMATE FOR PROVIDING ELECTRIFICATION WORK FOR GUA HOUSING

EXECUTIVE BLOCK + NON EXECUTIVE BLOCKS

DSR NON DSR DSR+NON DSR

S NO DESCRIPTION

AMOUNT AMOUNT AMOUNT

1 INTERNAL ELECTRIFICATION WORKS RS 1,45,77,174.10 75,31,740.00 2,21,08,914.10

2 EXTERNAL ELECTRIFICATION WORKS RS 847443.80 3725874.00 4573317.80

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Estimate For Providing Electrical Works Gua Housing

EXECUTIVE BLOCK + NON EXECUTIVE BLOCKS

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

A SCHEDULE ITEMS

WIRING AND SUB MAINS

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium

1 1.10.1 class PVC conduit, with modular switch, modular plate, Point

suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable

etc as required.a) Group A 1096 1079.25 1182858.00

Wiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, 2 way

modular switch, modular plate, suitable GI box and

earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 1.12 recessed medium class PVC conduit alongwith 1 No 4 sq. metre

mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

6 1.13 recessed medium class PVC conduit alongwith 2 Nos 4 metre

sq. mm FRLS PVC insulated copper conductor single

core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with

the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

b 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 25 355.14 8878.50

c 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire metre 25 466.79 11669.75

d 1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire metre 720 606.08 436377.60

e 1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire metre 25 801.73 20043.25

f 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire metre 180 1068.62 192351.60

g 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire metre 25 1451.4 36285.00

h 1.14.11 4 X 25 sq. mm + 2 X 6 sq. mm earth wire metre 100 1698.09 169809.00

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

providing and fixing 3 pin 5/6 amps modular socket outlet

and 5/6 amps modular switch, connection etc. as

required. (For light plugs to be used in non residential

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

9 1.32 providing and fixing 6 pin 15/16 amps modular socket Each

outlet and 15/16 amps modular switch, connection etc. as

Supplying and fixing of following modular switch/ socket

outlet on the existing Modular plate & switch including

connection but excluding modular plate etc. as required.

b 1.24.4 3 pin 5/6 amp socket outlet Each 256 129.72 33208.32

d 1.24.5 6 pin 15/16 amp socket outlet Each 96 209.47 20109.12

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

Supplying and fixing following size/ modules, GI box

Boxes alongwith modular base & cover plate for modular

switches in recess etc as required.

12 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial

type, socket outlet, with 2 pole and earth, metal

enclosed plug top along with 20 amps "C" curve, SP,

MCB, in sheet steel enclosure, on surface or in recess, Each

with chained metal cover for the socket out let and

complete with connections, testing and commissioning

etc. as required. 5 1723.61 8618.05

13 1.25 Supplying and fixing stepped fan regulator on the existing

modular plate switch box including connections but

excluding modular plate etc. as required.

14 Supplying and fixing of 16 SWG M.S. Fan Box 12.5" Rod

but without fan cover (hylam sheet). as required. 229 212.66 48699.14

15 Supplying and fixing of fan cover (hylam sheet).on the

existing Fan Box as required. 229 79.75 18262.75

16 Supplying and fixing of modular Blanking plate on the

1.26 existing modular plate & switch box excluding modular Each

plate etc. as reqd. 440 42.53 18713.20

17 1.24 Supply and fixing following modular switch/socket on the

existing modular plate and cover plate & switch box

including connections but excluding modular plate etc. as

a 1.24.6 Telephone socket outlet. (RJ - 11) Each 51 157.37 8025.87

b 1.24.7 TV antenna socket outlet Each 164 157.37 25808.68

18 1.27 Supplying and fixing following size/modules, GI box along

with modular base and cover plate for modular switches

in recess etc as required.

20 1.18 Supplying and drawing following pair, 0.5 sq.mm FR PVC

insulated copper conductor, unarmoured telephone cable

in the existing surface / recessed steel / PVC conduit as

21 1.27.1 Supply, laying, testing and commissioning of the following

co-axial PVC insulated conductor cable in existing

surface / recessed conduit etc. and including making

terminal joints, complete as required.

Supplying and fixing of following sizes of steel conduit

along with accessories in surface/recess including

22 1.2 painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

Supplying and fixing of following sizes of heavy class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of

recessed conduit as required.

DISTRIBUTION BOARDS

Supplying and fixing following way, Horizontal type three

pole and neutral, sheet steel, MCB distribution board, 415

volts, on surface/recess, complete with tinned copper bus

bar, neutral bus bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following way, Horizontal type three

pole and neutral, sheet steel, MCB distribution board, 240

volts, on surface/recess, complete with tinned copper bus

bar, neutral bus bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

a 2.3.4 16 way, Double door (For Units & Common Area) Each 53 3339.83 177010.99

Supplying and fixing following rating, four pole, 415 volts,

26 2.13 isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240

27 2.12 V,isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single

phase and neutral), 240 volts, residual current circuit

28 2.14 breaker (RCCB), having a sensitivity current upto 30

milliamperes in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,

"C" curve, miniature circuit breaker suitable for inductive

29 2.10 load of following poles in the existing MCB DB complete

with connections, testing and commissioning etc. as

a 2.10.1 Single pole Each 938 272.2 255323.60

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required. 150 13.82 2073.00

ERRECTION OF FAN & FIXTURE

Installation ,Testing, Commissioning of wall bracket

fittings of all sizes and shapes including LED lamps per

fitting, complete with all accessories including

connections etc. as required. 296 92.51 27382.96

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting / LED

Fittings of all types, with all accessories and tube

etc. directly on ceiling/ wall, including connection with

1.5 sq. mm FR PVC insulated, copper conductor, single

core cable and earthing etc. as required.

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting / LED

Fittings of all types and shape, with all accessories

and tube etc. on falsceiling including connection with

1.5 sq. mm FR PVC insulated, copper conductor, single

core cable and earthing etc. as required.

Supply, Installation, Testing and Commissioning of 1200

mm sweep, BEE 5 star rated, ceiling fan with Brush Less

Direct Current (BLDC) Motor, class of insulation: B, 3 nos.

blades, 30 cm long down rod, 2 nos. canopies, shackle

kit, safety rope, copper winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum

6.00, Air delivery minimum 210 Cum/Min , 350 RPM

(tolerance as per IS : 374-2019), THD less than 10%,

remote or electronic regulator unit for speed control and

all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50

Hz, single phase AC Supply, earthing etc. complete as

Installation of exhaust fan in the existing opening,

35 1.5 including making good the damage, connection,

testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame

for a exhaust fan of all sizes. 160 220.1 35216.00

EARTHING & LIGHTNING ARRESTER

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia

including accessories, and providing masonry enclosure

37 5.2 with cover plate having locking arrangement and watering Nos.

pipe etc. with charcoal/coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm

including accessories, and providing masonry enclosure

cover plate having locking arrangement and watering pipe

2.7 metre long etc. with charcoal/ coke and salt as

Earthing with copper earth plate 600 mm X 600 mm X 3

thick including accessories, and providing masonry

with cover plate having locking arrangement and watering

of 2.7 metre long etc. with charcoal/ coke and salt as

Providing and fixing 32 mm X 6 mm G.I. strip on surface

or in recess for connections etc. as required. 100 207.34 20734.00

Providing and fixing 32 mm X 6 mm Copper. strip on

surface or in recess for connections etc. as required. 40 1193.02 47720.80

Providing and fixing 25 mm X 5 mm G.I. strip on surface

or in recess for connections etc. as required. 200 259.45 51890.00

Providing and fixing 25 mm X 5 mm Copper. strip on

surface or in recess for connections etc. as required. 100 1235.55 123555.00

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in

44 recess for loop earthing along with existing surface/ Mtr

recessed conduit/ submain wiring/ cable as required 1500 44.66 66990.00

6.2 Providing and fixing of lightning conductor finial, made of

25 mm dia 300 mm long, G.I. tube, having single prong at

top, with 85 mm dia 6 mm thick G.I. base plate including

holes etc. complete as required. 10 550.79 5507.90

6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on

parapet or on surface of wall for lightning conductor and

external lighting complete as required. (For Horizontal

6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on

47 parapet or on surface of wall for lightning conductor Mtr

complete as required. (For vertical run) 150 209.47 31420.50

6.12 Providing and fixing testing joint, made of 20 mm X 3 mm

thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts,

nuts, chuck nuts and spring washers etc. complete as

LT CABLES TERMINATIONS & PIPE

Supplying and making ends termination with brass

compression glands and aluminium lugs for following size

49 of PVC insulated PVC sheathed aluminiumconductor

cable of 1.1 KV grade as required .

Supplying and laying of following size DWC HDPE pipe

ISI marked along with all accessories like socket, bend,

50 14.15 couplers etc. conforming to IS 14930, Part II complete

with fitting and cutting, jointing etc. in the existing trench,

complete as required.

a 14.11.1 90 mm dia (OD-90 mm & ID-76 mm nominal) metre 1000 180.76 180760.00

b 14.13.5 200 mm dia (OD-200 mm & ID-175 mm nominal) metre 1250 582.69 728362.50

B NON SCHEDULE ITEMS

DATA /TELEPHONE / TV

Supply and fixing following modular switch/socket on the

existing modular plate and cover plate & switch box

including connections but excluding modular plate etc. as

Information Socket Outlet RJ -45 suitable for CAT 6 Data

Supplying, Installation, testing and commissioning of

following sizes of telephone distribution board in M.S.

52 hinged type box duly painted complete with Krone type 0

tag block etc. including terminations of cable as required.

Supplying, Installation, testing and commissioning of

following sizes of 0.5 mm dia annealed tinned copper

53 conductor PVC insulated and PVC sheathed unarmoured

telephone cable on surface/ existing cable tray complete

Supplying, erection, testing and commissioning of

54 following tap off / splitter as per specification in 1.6mm

thick CRCA sheet steel enclosure for CATV system.

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

a 4 Way splitter box Each 16 812.00 12992.00

SITC of light fixtures suitable for LED fixture, lamps with

all components and accessories including but not

restricted to reflectors, housings, lamp holders and

55 including cost of ballasts and cost of lamps complete as

required and as below Make:-Bajaj,Havells,Polycab or

a 100W LED bulb Cendlayer Nos. 48 0.00

20W LED Tube light of Havells Cat Ref:

LUMILINE+BS20WLED830SPCSSor equivalent.

Surface mounted 18W LED Downlighter of Havells Cat

c Ref:Havells INTEGRANXTRDDLRSURD18WLED830S or Nos. 538 1991.00 1071158.00

Surface mounted 15W LED Downlighter of Havells Cat

d Ref:Havells INTEGRANXTRDDLRSURD15WLED865S or Nos. 122 1899.00 231678.00

Surface mounted 12W LED Downlighter of Havells Cat

e Ref:Havells INTEGRANXTRDDLRSURD12WLED857S or Nos. 224 1806.00 404544.00

15W Mirror Light of Havells Cat Ref:

LUMILINEXS17WLED865SPCWH or equivalent.

g 5W Night Lamp (Bulb Holder) Nos. 176 285.00 50160.00

10W LED Bulk Head of Havells Cat Ref:

h RUGBYGENXFTS10WLED865SSYMBOPC or Nos. 24 1528.00 36672.00

i Bell/ Buzer Nos. 48 500.00 24000.00

30W LED Flood Light of Havells Cat Ref:

j JETAQUANTOFLS30WLED765SYMPCGRY or Nos. 10 2038.00 20380.00

Supplying of under note sizes of heavy duty exhaust

fans complete with fan motor, blades fixing frame, louver

etc as required of havells makes or equivalent.

450 mm exhaust fan 900 RPM Each 160 1938.00 310080.00

MV PANEL BOARDS

The BOQ shall be read in conjunction with general notes,

specification and equipment schedule and single line

Supply and installation of the following cubical type

panels ( Partial Type tested ) made of 14 gauge CRCA

structure, base channel, doors & partitions complete with,

Air Circuit Breaker, moulded case circuit breakers,

meters, indicating lamps, current transformer etc.

Complete in all respects, insulated bus bars with heat

shrinkable PVC sleeve in suitable bus chambers,

interconnection, small wiring, name plate, danger plate,

earth bus etc. & comprising of compartments with hinged

door for each feeder & its accessories, cable alley with

hinged doors, bus chamber with bolted door etc. The

panel being of dust & vermin proof construction with

rubber gasket, attractively powder coated with Siemens

grey shade and having orange peel finish. The panel shall

be free standing type/ wall mounted type as per relevant

drawing, Equipment schedule, specifications including all

materials, accessories, loose supplied items, etc. required

for completeness of the project majorly comprising of

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

All MCCBS shall be with Extended type Front door

operating handle, Phase Spreaders & Phase Barriers

complying to IS/IEC 60947-1 & 2.

MCCBs shall be current limiting type preferably having an

encapsulated double break design, with rated operational

voltage (Ue) of 415V, insulation voltage (Ui) of 690 V (AC

50/60 Hz) & impulse voltage (Uimp) of not less than 8kV.

The electrical life of MCCBs shall be 8,000 operations up

to 250A & 4000 operations up to 630A and shall be of

single frame size upto 250A.Cable Termination on MCCB

should be done using circular lugs being fixed with a bolt

passing through.

For E/F in MCCBs wherever required , external earthfault

module with CBCT should be used with indication lamp

on the panel and fault sensitivity selection from 20% –

60% In. and time delay selection in case of Earth Fault

from 0.5 to 3 Sec/ instantaneous.All incomer MCCB

should be with E/F protection also.There Should be On,

Off, Trip, and electrical fault trip Indication lamp for all

MCCB on the panel door. Separate fault differentiation

indication (LED) for Over current and Earth fault.

Indication for over current and earth fault tripping shall be

extended to the panel door via indication lamps..All

MCCB shall be EMS compitable.

All MCCBs of ratigs above 250A shall be microprocessor

based and upto 250A shall be Thermal Magnetic Type

and with Min 35 kA Rating .

ON, OFF, Trip and Ready to close status for each ACB

and ON, OFF Trip staus for all Incommer MCCB shall be

avilable on MODBUS.

Control Voltage for Closing / Tripping coils , Spring

charging motor & Indicting lamps in Manually / Electrically

operated ACB Feeder shall be 230 V AC.

Metering CTs burden shall be with suitable VA & accuracy

CTs shall be "CAST RESIN" type .

All indication lights shall be LED type.

All energy meter shall be "DIGITAL" type with Modbus

Protocol as per techncial Specification

Panel Manufacturer should have Type Test Certificates

for Short Time withstand current test of 50KA for 1.0 Sec

Control SP MCB's of 2A Rating shall be provided for each

metering circuit.

20% spare control terminal to be provided.

Live parts shall not be accessible after opening the door,

Transparent acrylic sheet to be provided to cover the

same & busbar joints section shall be covered with PVC

All bus bar shall be insulated with coloured PVC Sleeve

i.e. R, Y, B, BK as per colour code.

All internal control wiring shall be heat resistant type.

All TP/TPN feeders shall have solid isolable neutral link.

Current density for bus bar shall not be more than

0.8A/Sqmm. Rating of Bus bar is after considering all

derating factors. (Bus bar sizing calculation to be

submitted for approval.)

Bus couplers shall be provided with ON & OFF indicating

lights but without releases.

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

All feeders shall be provided with door interlocked with

door defeat, pad lock facility.

Spare contacts of Relays/Contactor etc. shall be wired

upto terminal block.

Degree of protection for following type of distribution

panel enclosure shall be as per IS:13947-1993.

IP 43 for indoor panels.

IP 55 for outdoor panels.

Contractor and panel builder shall have to submit the GA

drawing and get approval from consultant before

57 MLDB (ENERGY METER PANEL) For Executive Block

1 Nos.400A, 4P MCCB

Metering & Indication:

Combined Ammeter/Voltmeter with Selector Switch and

400/5A, CL-1, 10VA CTs and 2A control MCB.

Sets of phase indicating lamp with control MCBs.

500A, TPN aluminium, colour coded bus bars suitable for

415V, 50Hz with fully rated neutral.(After deration)

1 Nos.80A, TPN MCB

2 Nos.40A, TPN MCB

20 Nos.63A, DP MCB

2 Nos. Bulb with holder

1 Nos.3 phase energy meter,100A, of class I accerecy

with suitable rating of Ct's if required and other

accessories as required.Meters Must be approved by

State Electricity Board.(Space Only)

16 Nos.Single phase energy meter 63A, of class I

accerecy with suitable rating of Ct's if required and other

accessories as required.Meters Must be approved by

State Electricity Board.(Space Only)

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

AMF PANEL For Executive Block & Non executive

1 Nos.80A, 4P ATS

1 Nos.80A, 4P MCCB

Metering & Indication:

Combined Ammeter/Voltmeter with Selector Switch and

400/5A, CL-1, 10VA CTs and 2A control MCB.

Sets of phase indicating lamp with control MCBs.

Sets of AMF Logic

150A, TPN aluminium, colour coded bus bars suitable for

415V, 50Hz with fully rated neutral.(After deration)

2 Nos.40A, TPN MCB

8 Nos.6-16A, DP MCB

2 Nos. Bulb with holder

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

MLDB (ENERGY METER PANEL) For Non Executive

1 Nos.250A, 4P MCCB

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

Metering & Indication:

Combined Ammeter/Voltmeter with Selector Switch and

400/5A, CL-1, 10VA CTs and 2A control MCB.

Sets of phase indicating lamp with control MCBs.

300A, TPN aluminium, colour coded bus bars suitable for

415V, 50Hz with fully rated neutral.(After deration)

1 Nos.80A, TPN MCB

2 Nos.40A, TPN MCB

10 Nos.63A, DP MCB

2 Nos. Bulb with holder

1 Nos.3 phase energy meter,100A, of class I accerecy

with suitable rating of Ct's if required and other

accessories as required.Meters Must be approved by

State Electricity Board.(Space Only)

8 Nos.Single phase energy meter 63A, of class I accerecy

with suitable rating of Ct's if required and other

accessories as required.Meters Must be approved by

State Electricity Board.(Space Only)

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

Supply & Laying of 1.1KV grade multicore aluminium

conductor XLPE insulated and PVC sheathed armoured

60 cable conforming to IS : 7098 (Part-I) 1998 along walls/ -

on existing cable trays etc. in an approved manner and

as per follows;

Design, supply at site, installation, testing &

commissioning of 3-phase, 415 volt, 1500 RPM, 50 HZ,

Diesel generator set with prime rating capacity of

following KVA at 0.8 pf lagging diesel engine alternator

set mounted on common base frame in outdoor type

acoustic enclosure , day tank capacity of 990 litres,m with

AMF Panel,battery, batter charger, return fuel cooler, anti

vibration mounting pads including residential silencer,

engine alternator, pcc based auto start & synchronization

61 set, safeties with accessories as per specification

complete as required. Diesel engine shall conform to

IS:10000 and alternator shall be self excited complete

with AVR to IS:4722.and updated at the time of

execusion.Contractor and manufacturer shall have to

submit GA drawing for approval to engineer in charge

before implementing.Also arrange testing schedule at

factory with engineer in charge and client.

62 Supplying, Installation, Testing & Commissioning of 13

Passenger lift (Machine Room Less) 1088Kg. serving Each 1 2100000 2100000.00

different floors as per specifications as under:-

(i) Speed: 1.0 meter per second (MPS)

(ii) Floor: Ground + 4 Upper floors

(iii) Travel: 19.0 mtrs. (G + 4 Upper floors)

(iv) Stops & Opening: 5 Nos.

(v) Operation: Microprocessor Based Simplex Selective

Collective Control Withh / Withhout Attendant

Digitally signed by PRIYA

2022 Total Rate

S.No. Description Unit Amount (Rs.)

Code / Qty (Rs.)

(vi) Automatic rescue device complete withh dry maintenance

free batteries as reqd.

(vii) Controller: ACV3F

(viii) Power: 400/415 Volts (3 Phase AC)

(ix) Type of doors:

(a) Car: Power operated, centre opening horizontal sliding

Stainless Steel honey comb finish.

(b) Landing doors: Stainless Steel honey comb finish.

(x) A hand rail not less than 600mm long at 900mm above

floor level to be fixed on all three sides of the lift car.

(xi) A mirror at 750mm above car floor level to be installed on

rear side of the car.

(xii) Voice announcement system in the car to announce the

position of the elevator in the hoist way as the car passes

or stops at a floor served by the elevators.

(xiii) Brail signage/button both inside and outside of car.

(xiv) Fire man swithch

DSR TOTAL Rs. 1,45,77,174.10

NON DSR TOTAL Rs. 75,31,740.00

DSR + NON DSR TOTAL Rs. 2,21,08,914.10

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: ESTIMATE FOR PROVIDING EXTERNAL ELECTRIFICATION WORKS FOR EXECUTIVE AND

2022 Total Rate Amount

S.No. Description Unit

Code / Qty (In Rs.) (In Rs.)

A SCHEDULE ITEMS

CABLE TERMINATION

Supplying and making ends termination with brass

compression glands and aluminium lugs for following

1 size of PVC insulated PVC sheathed

aluminiumconductor cable of 1.1 KV grade as required .

2 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable

in the existing surface/ recessed Steel/ PVC conduit/

raceway as required.

c 3 run of cable Metre 200 142.48 28496.00

Providing, laying and jointing PVC/RCC NP-2 pipe with

Vin stiff mixture of cement mortar in the proportion of 1:2

(1 cement:2 fine sand) including trenching

3 (75 cm deep / or as required) i/c testing the joints etc. in

loose soil/under the flooring (before laying the finished

flooring) for electrical cable entrance to the building

complete as required i/c excavation and refilling of earth.

Supplying and laying of following size DWC HDPE pipe

ISI marked along with all accessories like socket, bend,

couplers etc. conforming to IS 14930, Part II complete

with fitting and cutting, jointing etc.direct in ground (75

cm below ground level) including

excavation and refilling the trench but excluding sand

cushioning and protective covering etc., complete as

a 14.16.1 63 mm dia (OD-63 mm & ID-51 mm nominal) metre 1900 262.64 499016.00

b 14.16.3 120 mm dia (OD-120 mm & ID-103 mm nominal) metre 10 391.29 3912.90

c 14.16.4 160 mm dia (OD-160 mm & ID-135 mm nominal) metre 10 511.45 5114.50

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm

thick including accessories, and providing masonry

5 5.4 enclosure with cover plate having locking arrangement Set 4 31779.92

and watering pipe of 2.7 metre long etc. with charcoal/

coke and salt as required. 7944.98

Earthing with copper earth plate 600 mm X 600 mm X 3

thick including accessories, and providing masonry

with cover plate having locking arrangement and

of 2.7 metre long etc. with charcoal/ coke and salt as

required. 14713.95

5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface

or in recess for connections etc. as required. 259.45

Providing and fixing 25 mm X 5 mm Copper. strip on

surface or in recess for connections etc. as required. 1235.55

Digitally signed by PRIYA

2022 Total Rate Amount

S.No. Description Unit

Code / Qty (In Rs.) (In Rs.)

5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in

9 recess for loop earthing along with existing surface/ Mtr 2050 91553.00

recessed conduit/ submain wiring/ cable as required 44.66

B NON SCHEDULE ITEMS

EXTERNAL LIGHTING

Supplying and fixing (with suitable MS clamp) 300mm

10 long 65mm dia MS pipe with base plate i/c nipple for each 4 3384.00 13536.00

Supplying, installing, testing & commissioning of 4.5

Mtr long single dip Galvanised steel octagonal

poles in 3mm sheet integrated connector box

inside the pole containing one no. 5A MCB , Neutral

link and earth terminal with single over hang bracket

1m long ; providing and fixing in position

1:2:4 reinforced cement concrete foundation for the

pole, size 500mm(L)X500mm(W)X 1650mm deep i/c

excavation of earth, providing, cutting, bending and

placing in position reinforcement as per drawing and

providing PVC flexible pipes 50mm dia for cable

entry and exit as required i/c foundation bolts,

transportation, handling, marking etc. as per specification

and drawings as required of Havells/ Bajaj or equivalent

Supply and installation of following arms suitable for

4.5 Mtr to 9 mtr street light pole

a Single Arm over hang bracket 1mtr length each 14 3384.00 47376.00

b Double Arm over hang bracket 1mtr length each 9 4600.00 41400.00

Providing and erection of black painted galvanized 3

meter high poles in different section, top 60mm dia.,

bottom 100mm dia. with gold colour painted ornamental

cast aluminium ring having lockable weather proof flush

door junction box in bottom section, and suitable

arrangement for installation of CCTV and with base plate

dia. 290mm having 4 holes of 22mm dia. complete

erected in an approved manner including foundation of

Suitable size & type of foundation bolts as required. (For

supply & drawing 3 core 2.5 sqmm

unarmoured copper cable inside the GI

14 Octagonal pole from connector box to the light Set 20 1083.00 21660.00

fixture including connections with thimbles as required

upto 9m high pole

Supplying and fixing (with suitable MS clamp) 1200mm

long vertically and 900mm inclined at 45 degree, 65mm

dia MS pipe with hardware i/c nipple for street

light.(boundary wall light)

Digitally signed by PRIYA

2022 Total Rate Amount

S.No. Description Unit

Code / Qty (In Rs.) (In Rs.)

Supplying and fixing of LED Bollard Fitting 600mm High

with IP65 and IK07 Housing made up of aluminum pipe

powder coated black after phosphochromate treatment

with aluminum heat sink for effective thermal

management Complete with Mounting Brackets &

accessories as required with connections similar. Havells

Mount Bollard 0.60 mtr 5700K

16 MOUNTBLMINIMOUNTBL10WLED830PSYMTOPMMAS Set 10 5771.00 57710.00

. The product should be BIS approved with R number

mentioned on product label. To be supported with

Product test reports - LM79, Is 10322/IEC 60598 and for

LEDs - LM80, RoHS and Photo Biological Safety

Supplying and fixing of Spike Light LED of Havells cat

no. IRVINESPS5WLED830PSYMTG or equivalent.

Supply, fixing &testing of prewired external light fixture

having Die-cast housing with epoxy coating and

having profiled cooling fins at the top for effective

18 heat dissipation, separate driver and LED lamp

cavity, heat resistant toughened clear glass cover with

high transmittance and high quality gasketing

system, high power LED complete as required.

25 Watt LED Fitting Lighting lantern on GATE/ POST

TOP of Havells Cat

no.CORALMINIPT15WLED757PSYMTOPC or

Street Light Luminare of 60 watt LED including suitable

fixing MS clamps etc.as requird of Havells Cat No.

ENDURASUNDOWNSL60WLED765PASYBOTG or

Street Light Luminare of 35 watt LED including suitable

fixing MS clamps etc.as requird of Havells Cat No.

ENDURASUNDOWNSL35WLED765PASYBOPC or

Floodlight LED luminaire 50 Watas with high pressure

die cast housing with IP66 deg of protection of

v Havells Cat No. each 4 5429.00 21716.00

JETAQUANTOPLUSFLP50WLED757SYMLENS or

Supplying, installing, testing & commissioning of Feeder

Pillar outdoor type - Street Lighting as following

1 No. 40A 4P MCCB with indication lamp on panel, ON,

OFF,Electrical Fault Trip indicating lamps, phase

indicating lamps with 2 A control MCB.

Metering & Indication:

.Combined Ammeter/Voltmeter with Selector Switch and

40/5A, CL-1, 10VA CTs and 2A control MCB.

2 Sets of phase indicating lamp with control MCBs.

Sets 40 Amp, 415 volt, contactor MCX-31

Sets Astronomical digital Timer switch

Digitally signed by PRIYA

2022 Total Rate Amount

S.No. Description Unit

Code / Qty (In Rs.) (In Rs.)

100A, 3-Pole aluminium, colour coded bus bars suitable

for 415V, 50Hz with fully rated neutral.(After deration)

12 Nos. 16A - 32 A, 10 kA,DP MCB.

4 Nos. 16A 10 kA,TPN MCB.

Manual ON - OFF Bypass push button assembly brought

out at rain protected door slot so as to operate lights

manually without opening of doors of the feeder Set 2 90000.00 180000.00

pillar.Also operation of lighting systen shall be intergated

with Lux sensor and Lux Level setting.

20 Supply Installation testing commissioning of IP Bullet

Outdoor Cameras, 2 megapixel resolution ( 1280 x

1080P) Day / Night cameras with sensitivity of minimum

0.3 lux .The cameras shall use the 1/3 inch format

CMOS imager and shall have a 4mm fixed lens. The

Cameras shall be POE or 12VAC. IP67 Rated

weatherproof housing

Supply Installation testing commissioning of 16 channel

4K NVR, Support, H.265, Alarm In/Out 16/8, 1 HDMI, 1

VGA, 3x USB, 2x RJ-45 port (10/100/1000Mbps), 1

RS485 and 1 RS232 with power supply

Note-Storage Should have 1 Months Storage Capacity.

22 Supply, Installation, Testing and Commissioning of

Surveillance Hard disk - 6 TB Storage. Recording

parameter: 30 days of recording at FULL 1080p, 25fps Each 2 18500.00 37000.00

H.264 compression, complete as required.

23 Supply, Installation, Testing and Commissioning of 55" or

better 4K professional displays for 24x7 CCTV

application, complete as required.

LG / Samsung / Sony

24 Supply, Installation, Testing and Commissioning of

Networking Rack outdoor type pole / wall mounted of

16U along with PDU (With surge protection), cable

manager, fan etc for Switches & other accessories etc,

complete as required.

Supply, Installation, Testing and Commissioning of Layer

II Smart Managed Gigabit Ethernet switch: 8 port RJ45

10/100/1000 T (POE), , complete as required.

Supply, Installation, Testing and Commissioning of Layer

II Smart Managed Gigabit Ethernet switch: 16 port RJ45

10/100/1000 T (POE), , complete as required.

27 Supply, Installation, Testing and Commissioning of SFP

modules (1G/10G), complete as required. Each 10 4500.00 45000.00

Supply, Installation and Commissioning of RJ-45 i/o Jack

with Plate & mounting Gang Box, complete as required. Each 18 1250.00 22500.00

Digitally signed by PRIYA

2022 Total Rate Amount

S.No. Description Unit

Code / Qty (In Rs.) (In Rs.)

29 Supply, installation, testing and commissioning of 20

kVA,3 Phase input and 3 Phase output UPS with

alongwith lead acid batteries giving a back up of min. 30

min. at full load as per specification alongwith all Each 1 550000.00 550000.00

accessories including interconnecting cables, lugs, Base

Frames, Battery Rack & Battery Circuit breaker, palral kit

complete as required.

30 Supply, installation, testing and commissioning of 30

kVA,3 Phase input and 3 Phase output UPS with

alongwith lead acid batteries giving a back up of min. 30

min. at full load as per specification alongwith all Each 1 750000.00 750000.00

accessories including interconnecting cables, lugs, Base

Frames, Battery Rack & Battery Circuit breaker, palral kit

complete as required.

CABLE & TERMINATION

Supply & Laying of 1.1KV grade multicore aluminium

conductor XLPE insulated and PVC sheathed armoured

31 cable conforming to IS : 7098 (Part-I) 1998 along walls/ -

on existing cable trays etc. in an approved manner and

as per follows;

Supplying and making ends termination with brass

compression glands and aluminium lugs for following

32 size of PVC insulated PVC sheathed

aluminiumconductor cable of 1.1 KV grade as required .

Constructing Masonry chamber 60x60x75 cm (deep)

inside with 75 class designation FPS brick work in

cement mortar 1:4 (1 cement: 4 coarse sand) (for cable

entry) with 10 mm thick M.S. hinged cover plate on top in

33 40 x 5 mm MS angle iron frame embedded in C C 1:2:4 each 8 7500.00 60000.00

i/c necessary excavation and inside plastering with

cement mortar 1:3 (1 cement:3 fine sand) finished with a

floating coat of neat cement complete as required and as

per specifications attached.

Constructing masonry chamber 60 cm x 45 cm x 50 cm

(deep) inside with 75 class designation FPS brick work in

cement mortar 1:4 (1 cement : 3 coarse sand) (for cable

entry) with 10 mm thick M.S. hinged cover plate on top

34 in 40 x 40 x 5 mm MS angle iron frame embedded in C C each 12 6000.00 72000.00

1:2: 4i/c necessary excavation and inside plastering with

cement mortar 1:3 (1 cement:3 fine sand) finished with a

floating coat of neat cement complete as required and as

per specifications attached.

DSR TOTAL Rs. 847443.80

NON DSR TOTAL Rs. 3725874.00

DSR + NON DSR TOTAL Rs. 4573317.80

Digitally signed by PRIYA

Name of Project : Constrcution of 16 Executive Flats & 32 Non

Executive Flats for SAIL, Ranchi

SUMMARY SHEET (PLUMBING)

S. DSR Non-DSR

SUBHEAD AMOUNT

Digitally signed by PRIYA

Name of Project: EXECUTIVE HOUSING_BOKARO

1 SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings) 13,13,572.16 6,28,096.00

2 SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes) - 25,97,036.00

3 SUBHEAD III(Water Supply System(Internal)) 12,42,313.66 5,67,887.00

4 SUBHEAD IV(External Sewerage & Storm Water Drainage) 3,35,878.60 80,880.00

5 SUBHEAD V(External Water Supply) 31,048.19 -

SUBHEAD VI(Solar water heating system, Domestic Pump & - 4,98,623.40

SUBHEAD VII(Sewerage Treatment Plant-10 KLD)

SUBHEAD VIII (Kitchen Chimney)

Grand Total 82,76,335.01

Grand Total 82,76,335.01

Digitally signed by PRIYA

Name of Project: EXECUTIVE HOUSING_BOKARO

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings)

1 17.3 Providing and fixing white vitreous china pedestal type water

closet (European type) with seat and lid, 10 litre low level

white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required :

1.1 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid Each 64 6927.98 443390.72

2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

2.1 17.7.2 White Vitreous China Wash basin size 630x450 mm with a Each

single 15 mm C.P. brass pillar tap 64 4211.25 269520

3 17.22A Providing and fixing CP Brass 32 mm size Bottle Trap of Each

approved quality & make and as per the direction of Engineer-

4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink

as per IS:13983 with C.I. brackets and stainless steel plug 40

mm, including painting of fittings and brackets, cutting and

making good the walls wherever required:

4.1 17.10.1 Kitchen sink with drain board

5 18.22 Providing and fixing C.P. brass long arm shower rose with 15 or

6 MR 6 Providing and fixing CP Brass Single lever wall mixer of quality Each

& make as approved by Engineer in charge.Make:Jaquar or

equivalent 64 7505.00 480320

7 MR 5 Fixing of 15 mm C.P brass wall mounted mixing fittings Each

swinging spout for sink complete including cutting and making

good the walls where required. (Pantry, Kitchen, Coffee-Break

7 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube Each

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in -

8 18.53 Providing and fixing C.P. brass angle valve for basin mixer and Each

geyser points of approved quality conforming to IS:8931

9 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin

9.1 17.28.2 Flexible pipe

10 MR 10 Providing & Fixing in position C.P. Brass coat hook of approved

make (to the approval of Engineer-in-charge ) fixed into wall

with C.P. brass screws and rawl plugs etc. complete in all

10.1 MR 10.1 C.P.Brass coat hook Each 64 962.00 61568

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

11 17.31 Providing and fixing 600x900 mm beveled edge mirror of Each

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete. 64 1709.73 109422.72

12 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 Each

mm long, 200 mm wide with minimum distances of 37 mm

from wall face with concealed fittings arrangement of

approved quality and colour, weighing not less than 88 gms.

13 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, Each

125 mm high and 112 mm distance from wall of standard

shape with bracket of the same materials with snap fittings of

approved quality and colour, weighing not less than 105 gms.

SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes)

14 MR 1 Supply, installation , testing commissioning of PP Mineral filled

low noise Soil & Waste system as per EN 12056, with density

1.9 g/cm3. PP mineral(Astolan) filled Low noise system should

has a fire classification DIN 4102-B2/EN13501 . Product should

have a chemical resistance of pH 2-12 and is a complete sound

protection system according to DIN 4109. including with push

fit rubber ring sockets all necessary fittings and specials such

as Bends, junctions, offsets & vent cowl. Fixing at wall/ceiling

level supported by rubber line bracket & hangers etc. duly

epoxy coated. Cutting, chases/holes in floors / walls /

slab.Compliant with LABC. Weight mass per unit area of

DN100MM should not be less than 110.07kg/m3. sound levels

of not more than 15dBA as per EN 14366 at a flow rate of 4

l/s.including all core cut ,chases ,cutting making holes in all

wall and floor as required complete in all respect.

15 MR 2 Providing Fixing straight /offset type single body push fit type WC

pan connector with factory supplied spring loaded seal guard with

integral single mould sealing fins made of flexible EVA body,

including bush/adaptor as supplied with the pan connector (if

16 MR 3 Providing and fixing floor drain (FD) with 50mm/40mm outlet and

one 40mm inlet for waste, with SS grating (adjustable height),

having 50mm water seal and in-built NRV Each 48 1655.00 79440

17 MR 4 Providing and fixing PP/UPVC trap of self cleansing design with

screwed down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors :

17.1 MR 4.1 100 mm inlet and 100 mm outlet

17.1.1 MR 4.1.1 Sand cast iron S&S as per IS: 3989 Each 96 1655.00 158880

18 MR 5 Providing and fixing PP/UPVC grating with Cockroach proof

strainer of approved design including setting in floor with cement

motor to match with floor finish as per architect requirement

suitable for waster and FT.

19 MR 6 Providing and fixing PP/UPVC brass grating with frame of

approved design including setting in floor with cement motor

to match with floor finish as per architect requirement.

20 MR 7 Providing and fixing PP/UPVC extention piece for 100 mm dia

floor trap formed out of main pipe with multiple side inlets,

suitable for various dia pipes including all fixtures as required

complete as per drawing approved sample and direction of

engineer in charge. Each 96 1655.00 158880

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

21 MR 8 Providing and fixing PP/UPVC floor clean out plug with suitable

insert keys for opening, male threaded joint with threaded

socket drip seal to soil / waste pipe as required complete as

per drawing approved sample and direction of engineer in

Providing and fixing rainwater khurra on balconies & terrace

as required complete as per drawing approved sample and

direction of engineer in charge.(Bell mouth Type)

SUBHEAD III(Water Supply System(Internal))

23 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings and fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good the

walls etc(inside building)

23.1 18.8.1 15 mm nominal dia Pipes Mtr 560 529.31 296413.6

23.2 18.8.2 20 mm nominal dia Pipes Mtr 200 571.63 114326

23.3 18.8.3 25 mm nominal dia Pipes Mtr 20 666.95 13339

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply and

all CPVC plain & brass threaded fittings, including fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and testing

of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall(vertical & terrace area)

24.1 18.7.1 15 mm nominal dia Pipes Mtr 200 304.95 60990

24.2 18.7.2 20 mm nominal dia Pipes Mtr 560 356.21 199477.6

24.3 18.7.3 25 mm nominal dia Pipes Mtr 325 426.97 138765.25

24.4 18.7.4 32 mm nominal dia Pipes Mtr 190 551.59 104802.1

24.5 18.7.5 40 mm nominal dia Pipes Mtr 195 747.45 145752.75

24.6 18.7.6 50 mm nominal dia Pipes Mtr 110 993.28 109260.8

24.7 MR 2.7 65 mm nominal dia Pipes Mtr 30 1180 35400

24.8 MR 2.8 80 mm nominal dia Pipes Mtr 65 1250 81250

24.9 MR 2.9 100 mm nominal dia Pipes Mtr 120 1360 163200

25 18.18 Providing and fixing ball valve (brass) of approved quality, High

or low pressure, with plastic floats complete :

25.1 18.18.1 15mm i/d Brass Ball valves Each 64 432.6 27686.4

25.2 18.18.2 20mm i/d Brass Ball valves Each 48 491.78 23605.44

25.3 18.18.3 25mm i/d Brass Ball valves Each 16 493.42 7894.72

25.4 MR 3.4 32mm i/d Brass Ball valves Each 16 3847.00 61552

25.5 MR 3.5 40mm i/d Brass Ball valves Each 16 5453.00 87248

26 MR 4 Providing and fixing Butter fly valve with nitrile seat and

stainless steel stem with lever operation and cast iron body in

powder coated finish, suitable for test pressure of

10Kg/sq.mm) with flanges, gaskets and necessary pad locking

arrangement complete required.

Providing and fixing thermal insulation in cold/hot water pipes

a Polyolefin foam of closed cell structure having thermal

conductivity of 0.036 W/M.K at an average temperature of

30oC. complete with 24 gauge aluminium sheet/cladding.

27.1 MR 5.1 15 mm nominal dia Pipes Mtr 200 45 9000

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

27.2 MR 5.2 20 mm nominal dia Pipes Mtr 560 55 30800

27.3 MR 5.3 25 mm nominal dia Pipes Mtr 325 65 21125

27.4 MR 5.4 32 mm nominal dia Pipes Mtr 190 75 14250

27.5 MR 5.5 40 mm nominal dia Pipes Mtr 195 86 16770

27.6 MR 5.6 50 mm nominal dia Pipes Mtr 110 90 9900

27.7 MR 5.7 65 mm nominal dia Pipes Mtr 30 105 3150

27.8 MR 5.8 80 mm nominal dia Pipes Mtr 65 120 7800

27.9 MR 5.9 100 mm nominal dia Pipes Mtr 120 130 15600

SUBHEAD IV(External Sewerage & Storm Water Drainage)

28 MR 1 Excavation in trenches with straight or open cutting in streets,

lanes or in open area with 3D/JCB or excavator including

manually dressing bed, trimming sides and side slopes for

sewers and manholes to full depths as shown in

drawings,including, dressing to correct sections and

dewatering, provision for diversion for traffic, protection of

existing services i.e. telephone cables, electric lines, water

supply lines and gas lines etc. night signals, profiles, pegs, sight

rails, boning rods, watching, etc., fixing and maintenance of

caution boards, fencing, refilling trenches, watering, ramming

and restoration of surface to original level and removal of

surplus spoil from the site of works, upto one chain (15m)

complete in all respects

28.1 MR 1.1 Depth not exceeding 3 m. BGL

All kinds of soil except rocky Mtr 60 224 13440

29 MR 2 Excavation of trenches in a Streets, Lanes or in Open Area for

Storm Sewers and Manholes to Full Depths as Shown in

Drawings,excluding Shoring, Timbering of Poling Board Frame

System Type, dressing to correct sections and dewatering,

provision for diversion for traffic, protection of existing

services i.e. telephone cables ,electric lines, water supply lines

and gas lines.night signals, profiles, Pegs, Sight rails, boning

rods, crossing over trenches for access to the houses,

watching, fencing etc., fixing and maintenance of caution

boards, refilling trenches, watering of refill in 15 cm layers,

ramming and restoration of surface to original conditions and

removal of Surplus Spoil from the Site of Works, for all Works

other than connections to Ventilating Shafts upto a Lead of 15

29.1 MR 2.1 For depth not exceeding 2 m. below Ground level

All classes of soil except rocky Mtr 60 224 13440

30 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

31 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1

with stiff mixture of cement mortar in the proportion of 1:1 (1

cement : 1 fine sand) including testing of joints etc. complete :

32 19.7 Constructing brick masonry manhole in cement mortar 1:4 (

1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix

(1 cement : 1.5 coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8 mix

(1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate

40 mm nominal size), inside plastering 12 mm thick with

cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of

neat cement complete as per standard design :

32.1 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total

weight of cover and frame to be not less than 38 kg (weight of

cover 23 kg and weight of frame 15 kg) :

32.2 19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 14 13516.46 189230.44

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

33 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight

C.I. cover with frame of 300 x 300 mm size (inside) the weight of

cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design:

33.1 19.4.1 100x100 mm size P type

33.2 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 14 2879.04 40306.56

34 MR 7 Constructing catch basin 45x45 cm with bricks in cement mortar

1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast

R.C.C. horizontal grating with frame complete as per standard

34.1 MR 7.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 12 4500 54000

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as 165

mm with minimum 112 mm space between protruded legs having 2

mm tread on top surface by ribbing or chequering besides

necessary and adequate anchoring projections on tail length on

138 mm as per standard drawing and suitable to with stand the

bend test and chemical resistance test as per specifications and

having manufacture’s permanent identification mark to be visible

even after fixing, including fixing in manholes with 30x20x15 cm

cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size) complete as per design. Each 42 588.75 24727.5

36 19.21 Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with

cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) cement plastered on both

sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished

with a floating coat of neat cement and making necessary channels

for the drain etc. complete :

36.1 19.21.1 For pipes 100 to 250 mm diameter Each 2 861.75 1723.5

SUBHEAD V(External Water Supply)

37 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc.

37.1 18.12.4 32 mm dia nominal bore Mtr 20 953.35 19067

38 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive

bitumastic paint of approved quality :

38.1 18.40.4 32 mm diameter pipe Mtr 20 40.25 805

Fixing water meter and stop cock in G.I. pipe line including cutting

and threading the pipe and making long screws etc. complete (cost

of water meter and stop cock to be paid separately). Each 1 863.72 863.72

40 18.37 Constructing masonry Chamber 60x45x50 cm inside, in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter

complete with C.I. double flap surface box 400x200x200 mm

(inside) with locking arrangement and RCC top slab 1:1.5:3 mix (1

cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm

nominal size), including necessary excavation, foundation concrete

1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12 mm thick, finished with a floating coat

of neat cement complete as per standard design :

SUBHEAD VI(Solar water heating system, Domestic Pump & Equipments)

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

41 MR 1 Providing Solar Hot Water indirect Heating System using approved

type of heating liquid medium comprising of flat plate solar panels,

including all interconnecting insulated G.I. piping, primary and

secondary recirculation pumps, pressure type insulated hot water

tank, sacrificial magnesium anode with steel core including valves

on inlet, outlet, Y strainer and a water meter on the inlet, air release

valve all mounted on galvanized MS sections complete with

connection with the existing piping.(including all civil works)

Flat plate solar collector panels of 2 x 1 m size approx. ( as

specified below) the panels enclosed in insulated collector boxes

with single piece toughened glass 4 mm thick and fixed with heat

resistant gasket. Minimum 30 Nos. or as per manufacturor

Integrated calorifier tank designed so as to have a Insulated M.S

Horizontal tank (cap as specified below) suitable for 5 kg/cm2

operating pressure with Heat exchanger coil of copper of suitable

grade of required area for boiler feed water and for solar feed

water. Tank shall be provided with hot water inlet / outlet over flow/

drain connection with M H cover. Vent pipe connection & GI Vent

pipe of adequate height / length, pressure gauge at inlet/ outlet. All

the valves & accessories shall be suitable for an operating

pressure of 4.0kg/sqm tank. The system will be with electrical back

up with heating element 14.4KW. or as required

Primary circulation pump-two nos. (One working + one standby) for

circulation of fluid from Solar panels to calorifier. The system will

include the temperature sensors and automatic control panel.

Inter-connected insulated G.I. piping insulated with 9 mm thick

nitrile rubber heat resistant insulation sections (Vidoflex or equiv.)

and valves with outer mechanical protection of aluminium sheet

Electrical Panels

Weather proof outdoor type IP 65 Switch board cubicle, fabricated

from 16 gauge M.S. Sheet with dust and vermin proof construction,

powder coated in approved shade. All switchgear will be identified

with etched plastic identification plates for each motor. The panel

shall be wired with colour coded wiring. (All interconnecting

wiring/cabling panel to motors, fuses, MCB, off/on indicating lights,

bus bars, switch gears and accessories as required.

1000 liters per day of capacity Each 2 200000 400000

42 MR 2 Supply, assembly, erection, testing and commissioning of pumping

system comprising the following:

Vertical/Horizontal centrifugal pumps (1 Working + 1 Stand-by) with

mechanical seal, SS Volute casing and SS impeller connected to

suitable capacity TEFC induction motor suitable for 415 ± 10 %

volts, 3 phase, 50 cycles A.C. supply with 100 mm dia.. pressure

gauges including MS skid and mounting of the pumps on the skid.

(Motor to be of the same make as the pump)

DOMESTIC WATER TRANSFER PUMP IN UGT

Capacity : 75 LPM Each (1 Working + 1 Standby) @ 55 M head. Each 1 50000 50000

43 MR 3 Providing & fixing full way lever operated forged brass ball valve

of brass body with forged brass hard chrome plated steel ball

tested to a pressure not less than 10 Kg / sqcm with threaded /

flanged joints complete with nuts, bolts, gaskets, washers etc.

44 MR 4 Supplying, installation, testing and commissioning of Heavy Duty

floating flange type expansion joints (PN 16) conforming to FSA

and EJMA(USA) with EPDM Body and zinc coated mild steel

flanges. The bellow shall be compatible to be installed between

flanges as per BS 10 relevant tables, ANSI 16.5 Class 125/150

BS4504/DN2501 . The cost of the valves to be inclusive of flanges

on either ends with rubber gaskets, nuts, washers etc. complete as

required as per the satisfaction of the engineer in charge. The body

of the valve to be tested to a pressure of 24 Kg / sqcm.

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

45 MR 5 Providing & fixing 'Y' Strainer PN 16 (flanged) with stainless steel

fine wire mesh perforated sheet basket with necessary flanges /

union nuts, bolts & washers complete as required (on pump

46 MR 6 Providing and fixing ( flanged end)non- return valve PN 1.6 of

approved quality as per IS 1538( flanged end ) :

46.1 MR 6.1 50 mm nominal bore

Horizontal Each 2 5600 11200

SUBHEAD VII(Sewerage Treatment Plant-10 KLD)

47 MR 1 Providing, designing, fixing & commissioning of STP of Capacity 10 Set

KLD( 10,000 Lit/Day) of appropriate technology along with tertiary

treatment plant (TTP) including all piping, accessories etc..

Complete in all respect.

SUBHEAD VIII (Kitchen Chimney)

47 MR 1 Providing and fixing chimney 1600 cumtr/hr ,including all required Set

fittings and cabeling. Complete in all respect.

Digitally signed by PRIYA

Name of Project: NON-EXECUTIVE HOUSING_BOKARO

SUBHEAD AMOUNT

1 SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings) 14,72,854.24 5,41,888.00

2 SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes) - 23,27,224.00

3 SUBHEAD III(Water Supply System(Internal)) 16,11,036.45 4,25,504.00

4 SUBHEAD IV(External Sewerage & Storm Water Drainage) 5,59,532.70 2,20,160.00

5 SUBHEAD V(External Water Supply) 1,24,192.80 -

SUBHEAD VII(Sewerage Treatment Plant-10 KLD)

Grand Total 82,32,392.19

Grand Total 82,32,392.19

Digitally signed by PRIYA

Name of Project: NON-EXECUTIVE HOUSING_BOKARO

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings)

1 17.3 Providing and fixing white vitreous china pedestal type water

closet (European type) with seat and lid, 10 litre low level

white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required :

1.1 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid Each 64 6927.98 443391

2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

2.1 17.7.2 White Vitreous China Wash basin size 630x450 mm with a Each 64 269520.18

single 15 mm C.P. brass pillar tap 4211.25

3 17.22A Providing and fixing CP Brass 32 mm size Bottle Trap of Each 64 70419.38

approved quality & make and as per the direction of Engineer-

in-charge. 1100.3

4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink

as per IS:13983 with C.I. brackets and stainless steel plug 40

mm, including painting of fittings and brackets, cutting and

making good the walls wherever required:

4.1 17.10.1 Kitchen sink with drain board

5 18.22 Providing and fixing C.P. brass long arm shower rose with 15 or

6 MR 6 Providing and fixing CP Brass Single lever wall mixer of quality Each 64 7505.00 480320

& make as approved by Engineer in charge.Make:Jaquar

7 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube Each 64 23760.08

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in - charge.

8 18.53 Providing and fixing C.P. brass angle valve for basin mixer and Each 448 273572.63

geyser points of approved quality conforming to IS:8931

9 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin

9.1 17.28.2 Flexible pipe

10 MR 10 Providing & Fixing in position C.P. Brass coat hook of approved

make (to the approval of Engineer-in-charge ) fixed into wall

with C.P. brass screws and rawl plugs etc. complete in all

10.1 MR 10.1 C.P.Brass coat hook Each 64 962.00 61568

11 17.31 Providing and fixing 600x900 mm beveled edge mirror of Each 64 109422.93

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete. 1709.73

12 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 Each 64 15784.48

mm long, 200 mm wide with minimum distances of 37 mm

from wall face with concealed fittings arrangement of

approved quality and colour, weighing not less than 88 gms.

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

13 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, Each 64 11456.42

125 mm high and 112 mm distance from wall of standard

shape with bracket of the same materials with snap fittings of

approved quality and colour, weighing not less than 105 gms.

SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes)

14 MR 1 Supply, installation , testing commissioning of PP Mineral filled

low noise Soil & Waste system as per EN 12056, with density

1.9 g/cm3. PP mineral(Astolan) filled Low noise system should

has a fire classification DIN 4102-B2/EN13501 . Product should

have a chemical resistance of pH 2-12 and is a complete sound

protection system according to DIN 4109. including with push

fit rubber ring sockets all necessary fittings and specials such

as Bends, junctions, offsets & vent cowl. Fixing at wall/ceiling

level supported by rubber line bracket & hangers etc. duly

epoxy coated. Cutting, chases/holes in floors / walls /

slab.Compliant with LABC. Weight mass per unit area of

DN100MM should not be less than 110.07kg/m3. sound levels

of not more than 15dBA as per EN 14366 at a flow rate of 4

l/s.including all core cut ,chases ,cutting making holes in all

wall and floor as required complete in all respect.

15 MR 2 Providing Fixing straight /offset type single body push fit type WC

pan connector with factory supplied spring loaded seal guard with

integral single mould sealing fins made of flexible EVA body,

including bush/adaptor as supplied with the pan connector (if

16 MR 3 Providing and fixing floor drain (FD) with 50mm/40mm outlet and

one 40mm inlet for waste, with SS grating (adjustable height),

having 50mm water seal and in-built NRV Each 64 1655.00 105920

17 MR 4 Providing and fixing PP/UPVC trap of self cleansing design with

screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

17.1 MR 4.1 100 mm inlet and 100 mm outlet

17.1.1 MR 4.1.1 Sand cast iron S&S as per IS: 3989 Each 128 1655.00 211840

18 MR 5 Providing and fixing PP/UPVC grating with Cockroach proof

strainer of approved design including setting in floor with cement

motor to match with floor finish as per architect requirement

suitable for waster and FT.

19 MR 6 Providing and fixing PP/UPVC brass grating with frame of

approved design including setting in floor with cement motor

to match with floor finish as per architect requirement.

20 MR 7 Providing and fixing PP/UPVC extention piece for 100 mm dia

floor trap formed out of main pipe with multiple side inlets,

suitable for various dia pipes including all fixtures as required

complete as per drawing approved sample and direction of

engineer in charge. Each 128 1655.00 211840

21 MR 8 Providing and fixing PP/UPVC floor clean out plug with suitable

insert keys for opening, male threaded joint with threaded

socket drip seal to soil / waste pipe as required complete as

per drawing approved sample and direction of engineer in

Providing and fixing rainwater khurra on balconies & terrace

as required complete as per drawing approved sample and

direction of engineer in charge.(Bell mouth Type)

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

SUBHEAD III(Water Supply System(Internal))

23 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings and fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good the

walls etc(inside building)

23.1 18.8.1 15 mm nominal dia Pipes Mtr 960 529.31 508138.31

23.2 18.8.2 20 mm nominal dia Pipes Mtr 640 571.63 365843.25

23.3 18.8.3 25 mm nominal dia Pipes Mtr 80 666.95 53356.39

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply and

all CPVC plain & brass threaded fittings, including fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and testing

of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall(vertical & terrace area)

24.1 18.7.1 15 mm nominal dia Pipes Mtr 80 304.95 24396.36

24.2 18.7.2 20 mm nominal dia Pipes Mtr 420 356.21 149606.31

24.3 18.7.3 25 mm nominal dia Pipes Mtr 540 426.97 230562.78

24.4 18.7.4 32 mm nominal dia Pipes Mtr 300 551.59 165476.06

24.5 18.7.5 40 mm nominal dia Pipes Mtr 160 747.45 14948.93

24.6 18.7.6 50 mm nominal dia Pipes Mtr 20 993.28 19865.63

24.7 MR 2.7 65 mm nominal dia Pipes Mtr 20 1180 23600

24.8 MR 2.8 80 mm nominal dia Pipes Mtr 80 1250 100000

24.9 MR 2.9 100 mm nominal dia Pipes Mtr 40 1360 54400

25 18.18 Providing and fixing ball valve (brass) of approved quality, High

or low pressure, with plastic floats complete :

25.1 18.18.2 20mm i/d Brass Ball valves Each 64 491.78 31473.68

25.2 18.18.3 25mm i/d Brass Ball valves Each 96 493.42 47368.74

25.3 MR 3.5 40mm i/d Brass Ball valves Each 20 5453.00 109060

26 MR 4 Providing and fixing Butter fly valve with nitrile seat and

stainless steel stem with lever operation and cast iron body in

powder coated finish, suitable for test pressure of

10Kg/sq.mm) with flanges, gaskets and necessary pad locking

arrangement complete required.

Providing and fixing thermal insulation in cold/hot water pipes

a Polyolefin foam of closed cell structure having thermal

conductivity of 0.036 W/M.K at an average temperature of

30oC. complete with 24 gauge aluminium sheet/cladding.

27.1 MR 5.1 15 mm nominal dia Pipes Mtr 80 45 3600

27.2 MR 5.2 20 mm nominal dia Pipes Mtr 420 55 23100

27.3 MR 5.3 25 mm nominal dia Pipes Mtr 540 65 35100

27.4 MR 5.4 32 mm nominal dia Pipes Mtr 300 75 22500

27.5 MR 5.5 40 mm nominal dia Pipes Mtr 160 86 13760

27.6 MR 5.6 50 mm nominal dia Pipes Mtr 20 90 1800

27.7 MR 5.7 65 mm nominal dia Pipes Mtr 20 105 2100

27.8 MR 5.8 80 mm nominal dia Pipes Mtr 80 120 9600

27.9 MR 5.9 100 mm nominal dia Pipes Mtr 40 130 5200

SUBHEAD IV(External Sewerage & Storm Water Drainage)

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

28 MR 1 Excavation in trenches with straight or open cutting in streets,

lanes or in open area with 3D/JCB or excavator including

manually dressing bed, trimming sides and side slopes for

sewers and manholes to full depths as shown in

drawings,including, dressing to correct sections and

dewatering, provision for diversion for traffic, protection of

existing services i.e. telephone cables, electric lines, water

supply lines and gas lines etc. night signals, profiles, pegs, sight

rails, boning rods, watching, etc., fixing and maintenance of

caution boards, fencing, refilling trenches, watering, ramming

and restoration of surface to original level and removal of

surplus spoil from the site of works, upto one chain (15m)

complete in all respects

28.1 MR 1.1 Depth not exceeding 3 m. BGL

All kinds of soil except rocky Mtr 100 224 22400

29 MR 2 Excavation of trenches in a Streets, Lanes or in Open Area for

Storm Sewers and Manholes to Full Depths as Shown in

Drawings,excluding Shoring, Timbering of Poling Board Frame

System Type, dressing to correct sections and dewatering,

provision for diversion for traffic, protection of existing

services i.e. telephone cables ,electric lines, water supply lines

and gas lines.night signals, profiles, Pegs, Sight rails, boning

rods, crossing over trenches for access to the houses,

watching, fencing etc., fixing and maintenance of caution

boards, refilling trenches, watering of refill in 15 cm layers,

ramming and restoration of surface to original conditions and

removal of Surplus Spoil from the Site of Works, for all Works

other than connections to Ventilating Shafts upto a Lead of 15

29.1 MR 2.1 For depth not exceeding 2 m. below Ground level

All classes of soil except rocky Mtr 240 224 53760

30 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

31 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1

with stiff mixture of cement mortar in the proportion of 1:1 (1

cement : 1 fine sand) including testing of joints etc. complete :

32 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1

cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1

cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate

20 mm nominal size), foundation concrete 1:4:8 mix (1 cement

: 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm

nominal size), inside plastering 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating

coat of neat cement and making channels in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) finished with a floating coat of neat cement

complete as per standard design :

32.1 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total

weight of cover and frame to be not less than 38 kg (weight of

cover 23 kg and weight of frame 15 kg) :

32.2 19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 16 13516.46 216263.31

33 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight

C.I. cover with frame of 300 x 300 mm size (inside) the weight of

cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design:

33.1 19.4.1 100x100 mm size P type

33.2 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 32 2879.04 92129.42

34 MR 7 Constructing catch basin 45x45 cm with bricks in cement mortar

1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast

R.C.C. horizontal grating with frame complete as per standard

34.1 MR 7.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 32 4500 144000

Digitally signed by PRIYA

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No. Item No Item No Rate Amount Rate Amount

35 19.7 Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with

stand the bend test and chemical resistance test as per

specifications and having manufacture’s permanent identification

mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size)

complete as per design. Each 48 588.75 28259.96

36 19.21 Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with

cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) cement plastered on both

sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished

with a floating coat of neat cement and making necessary

channels for the drain etc. complete :

36.1 19.21.1 For pipes 100 to 250 mm diameter Each 8 861.75 6894.01

SUBHEAD V(External Water Supply)

37 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc.

38 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive

bitumastic paint of approved quality :

Fixing water meter and stop cock in G.I. pipe line including cutting

and threading the pipe and making long screws etc. complete

(cost of water meter and stop cock to be paid separately). Each 4 863.72 3454.87

40 18.37 Constructing masonry Chamber 60x45x50 cm inside, in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter

complete with C.I. double flap surface box 400x200x200 mm

(inside) with locking arrangement and RCC top slab 1:1.5:3 mix (1

cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm

nominal size), including necessary excavation, foundation

concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone

aggregate 40 mm nominal size) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a

floating coat of neat cement complete as per standard design :

SUBHEAD VII(Sewerage Treatment Plant-10 KLD)

47 MR 1 Providing, designing, fixing & commissioning of STP of Capacity Set

15 KLD( 15,000 Lit/Day) of appropriate technology along with

tertiary treatment plant (TTP) including all piping, accessories etc..

Complete in all respect.

Digitally signed by PRIYA

Name of Project : Non Executive Housing _Bokaro

Name of Work : FIRE FIGHTING WORK

DSR 2022 DSR 2022 MR

MR Description of Item Unit Total Qty

Item No Rate Amount Rate Amount

SUBHEAD I:FIRE HYDRANT SYSTEM

Supplying, installation, testing and commissioning of electric

driven terrace pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

Horizontal type, multistage, centrifugal, split casing pump of

cast iron body & bronze impeller with stainless steel shaft,

mechanical confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55

class of protection for enclosure, horiziontal foot mounted type

with Class-'F' insulation, conforming to IS-325

M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with

anti vibration pads

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

18.7 gaskets etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of

synthetic enamel paint

of required shade complete as required :

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia

18.9 with cast iron wheel ISI marked conforming to IS 5290 (Type -

A) with blank Gunmetal/Stainless teel cap and chain as

3 18.9.1 Single Headed Gunmetal Each 8 8129.99 65039.92

Supplying, fixing, testing and commissioning of butterfly valve

18.11 of PN 1.6 rating with bronze/gunmetal seat duly ISI conforming

to IS 13095 of following sizes as required :

Providing, installation, testing and commissioning of non-

return valve of following sizes confirming to IS: 5312 complete

with rubber gasket, GI bolts, nuts,washers etc.as required :.

Providing, installation, testing and commissioning of stainless

steel Y-strainer fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia

holes with stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with

63 mm dia male and female couplings duly bound with GI wire,

rivets etc. conforming to IS 636 (type-A) as required:

Digitally signed by PRIYA

DSR 2022 DSR 2022 MR

MR Description of Item Unit Total Qty

Item No Rate Amount Rate Amount

Supplying and Fixing First Aid Hose Reel, wall mounting

swinging type complete with drum & bracket of MS

18.17 construction, spray painted in Post office Red, confirming to IS

884/1995 with upto date amendments, complete with the

following as required.

20 mm nominal internal dia as per IS 12585 water hose

thermoplastic (Textile reinforced)Type II as per IS: 12585

20 mm dia. ball valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connection from riser with 25 mm dia gun metal stop valve

and M.S pipe as reqd.

Supplying & fixing 63 mm dia gun metal short branch pipe with

20 mm nominal internal diameter size nozzle conforming to IS

903 suitable for instantaneous connection to interconnect hose

pipe coupling as required:

Supplying and fixing air vessel made of 250 mm dia, 8 mm

thick MS sheet, 1200 mm in height with air release valve on top

and flanged connection to riser, drain arrangement with 25 mo

dia gun metal wheel valve with required accessories, pressure

gauge and painting with synthetic enamel paint of approved

shade as required. Each 4 19398.85 77595.4

Providing and fixing standard fire man's axe with heavy duty

insulated rubber handle. Each 8 846.00 6768

Providing and fixing fire hose cabinet fabricated from 16 gauge

M.S. Sheet with single or double glazed front door (with 4 mm

thick glass) and locking arrangement, painted fire red with

stove enamelled paint "FIRE HOSE" written on front including

necessary supports approximate size.

Providing and fixing dial type pressure gauge with isolation

cock and pipe at hydrant station.

13 Diameter 100 mm calibration 0-8 Kg. Each 8 760.00 6080

Providing and fixing CO2 type fire extinguishers with steel

cylinder with a discharge valve and conforming to IS:15683.

14 Extinguishers shall be painted with rex enamel paint and fixed

to wall with brackets capacity 4.5 Kg.

Providing and fixing ABC powder type fire extinguisher

suitable for inverted operation and fabricated from 1.6 mm

M.S. sheet internally protected with anticorrosive treatment

and hydraulically tested to a pressure of 25 Kg/Sqcm.

Extinguishers externally painted with red enamel and fixed to

wall with brackets complete with internal charge and spanner

(Conforming to IS:15683 capaicity 6 KG.).

Digitally signed by PRIYA

Name of Project : Constrcution of 16 Executive Flats & 32 Non

Executive Flats for SAIL, Ranchi

SUMMARY SHEET (FIRE FIGHTING)

S. DSR Non-DSR

SUBHEAD AMOUNT

2 Non Executive Flats 11,99,555 1,17,168 13,16,723

Digitally signed by PRIYA

Name of Project : Executive Housing Bokaro

Name of Work : FIRE FIGHTING WORK

DSR 2022 DSR 2022 MR

MR Description of Item Unit Total Qty

Item No Rate Amount Rate Amount

SUBHEAD I:FIRE HYDRANT SYSTEM

Supplying, installation, testing and commissioning of electric

driven terrace pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

Horizontal type, multistage, centrifugal, split casing pump of

cast iron body & bronze impeller with stainless steel shaft,

mechanical confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55

class of protection for enclosure, horiziontal foot mounted

type with Class-'F' insulation, conforming to IS-325

M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with

anti vibration pads

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including Welding,

fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets

18.7 etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of

synthetic enamel paint

of required shade complete as required :

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia

18.9 with cast iron wheel ISI marked conforming to IS 5290 (Type -

A) with blank Gunmetal/Stainless teel cap and chain as

3 18.9.1 Single Headed Gunmetal Each 10 8129.99 81299.92

Supplying, fixing, testing and commissioning of butterfly valve

18.11 of PN 1.6 rating with bronze/gunmetal seat duly ISI

conforming to IS 13095 of following sizes as required :

Providing, installation, testing and commissioning of non-

return valve of following sizes confirming to IS: 5312 complete

with rubber gasket, GI bolts, nuts,washers etc.as required :.

Providing, installation, testing and commissioning of stainless

steel Y-strainer fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia

holes with stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with

63 mm dia male and female couplings duly bound with GI

wire, rivets etc. conforming to IS 636 (type-A) as required:

Digitally signed by PRIYA

DSR 2022 DSR 2022 MR

MR Description of Item Unit Total Qty

Item No Rate Amount Rate Amount

Supplying and Fixing First Aid Hose Reel, wall mounting

swinging type complete with drum & bracket of MS

18.17 construction, spray painted in Post office Red, confirming to IS

884/1995 with upto date amendments, complete with the

following as required.

20 mm nominal internal dia as per IS 12585 water hose

thermoplastic (Textile reinforced)Type II as per IS: 12585

20 mm dia. ball valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connection from riser with 25 mm dia gun metal stop valve

and M.S pipe as reqd.

Supplying & fixing 63 mm dia gun metal short branch pipe with

20 mm nominal internal diameter size nozzle conforming to IS

903 suitable for instantaneous connection to interconnect

hose pipe coupling as required:

Supplying and fixing air vessel made of 250 mm dia, 8 mm

thick MS sheet, 1200 mm in height with air release valve on

top and flanged connection to riser, drain arrangement with

25 mo dia gun metal wheel valve with required accessories,

pressure gauge and painting with synthetic enamel paint of

approved shade as required. Each 2 19398.85 38797.69

Providing and fixing standard fire man's axe with heavy duty

insulated rubber handle. Each 10 846.00 8460

Providing and fixing fire hose cabinet fabricated from 16 gauge

M.S. Sheet with single or double glazed front door (with 4 mm

thick glass) and locking arrangement, painted fire red with

stove enamelled paint "FIRE HOSE" written on front including

necessary supports approximate size.

Providing and fixing dial type pressure gauge with isolation

cock and pipe at hydrant station.

13 Diameter 100 mm calibration 0-8 Kg. Each 10 760.00 7600

Providing and fixing CO2 type fire extinguishers with steel

cylinder with a discharge valve and conforming to IS:15683.

14 Extinguishers shall be painted with rex enamel paint and fixed

to wall with brackets capacity 4.5 Kg.

Providing and fixing ABC powder type fire extinguisher suitable

for inverted operation and fabricated from 1.6 mm M.S.

sheet internally protected with anticorrosive treatment and

hydraulically tested to a pressure of 25 Kg/Sqcm.

15 Extinguishers externally painted with red enamel and fixed to

wall with brackets complete with internal charge and spanner

(Conforming to IS:15683 capaicity 6 KG.).

Digitally signed by PRIYA

ABSTRACT OF COST EXTERNAL DEVELOPMENT WORKS

Name of the work : Constrcution of 16 Executive Flats & 32 Non Executive Flats for SAIL, Ranchi

S.L. No. Description of Sub-Head Amount (Rs)

1 Earth Work : 14,40,311.00

2 Concrete Work : 21,17,613.00

3 Reinforced Cement Concrete : 19,73,684.00

4 Masonry Work : 6,68,814.00

5 Steel Work 9,36,350.00

6 Finishing : 91,953.00

8 Precast Boundary wall 22,44,092.00

9 Open Gym Equipments 7,38,592.00

10 Horticulture -DSR 2020 5,65,729.04

Digitally signed by PRIYA

Name of the work : Constrcution of 16 Executive Flats & 32 Non Executive Flats for SAIL, GOM, Jharkhand

BOQ for External Development Civil Works

Sl.No. Description of Item Quantity Rate (Rs) Amount(Rs)

Sub-Head : Earth Work

2.6 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50m and lift up to 1.5m,as

directed by Engineer-in-Charge.

1 2.6.1 All kinds of soil 74.24 Cum 11762.00

2.7 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30 cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50 m and lift up to 1.5m, as

directed by Engineer-in-Charge.

2 2.7.1 Ordinary rock 18.56 Cum 8150.00

3 2.25 Filling available excavated earth (excluding rock) in 74.24 Cum 12717.00

trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited 171.3

layer by ramming and watering, lead up to 50 m and lift

4 2.25A Excavating, supplying and filling of local earth (including 1559.28 Cum 935098.00

royalty) by mechanical transport up to a lead of 5 km,

also including ramming and watering of the earth in 599.7

layers not exceeding 20 cm in trenches, plinth, sides of

foundation etc., complete.

5 2.27 Supplying and filling in plinth with sand under floors, 205.65 Cum 472584.00

including watering, ramming, consolidating and dressing 2298

6 Total of the Sub-Head - Earth Work : 1440311.00

Sub-Head : Concrete Work

4.1 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

7 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from 301.73 Cum 2029591.00

natural sources : 8 graded stone aggregate 40 mm 6726.44

nominal size derived from natural sources).

8 4.11 Providing and laying damp-proof course 50mm thick 145.00 Sqm 69728.00

with cement concrete 1:2:4 (1 cement : 2 coarse sand

(zone-III) derived from natural sources : 4 graded stone 480.88

aggregate 20mm nominal size derived from natural

9 4.12 Extra for providing and mixing water proofing material 46.40 units 740.00

in cement concrete work in doses by weight of cement 15.95

as per manufacturer’s specification.

10 4.13 Providing and applying a coat of residual petroleum 145.00 Sqm 17554.00

bitumen of grade of VG-10 of approved quality using 1.7

kg per square metre on damp proof course after 121.06

cleaning the surface with brushes and finally with a

piece of cloth lightly soaked in kerosene oil.

Total of the Sub-Head - Concrete Work : 2117613.00

Sub-Head : Reinforced Cement Concrete

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Rate (Rs) Amount(Rs)

5.9 Centering and shuttering including strutting, propping

etc. and removal of form for :

11 5.9.1 Foundations, footings, bases of columns, etc. for mass 214.67 Sqm 75803.00

12 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 50.00 Sqm 42758.00

13 5.9.21 Lintels, beams, plinth beams, girders, bressumers and Sqm

cantilevers with water proof ply 12 mm thick

5.22 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

14 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or 3225.00 Kg 307407.00

5.22A Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete above plinth level.

15 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or Kg 1169047.00

5.33 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland

Pozzolana/ Ordinary Portland/ Portland Slag cement,

admixtures in recommended proportions as per IS: 9103

to accelerate/ retard setting of concrete, to improve

durability and workability without impairing strength;

including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement as per

direction of the engineer-in-charge; for the following

grades of concrete.

Note: Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable

separately. In case the cement content in design mix is

more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement

5.33.1 All works upto plinth level

16 5.33.1.1 Concrete of M25 grade with minimum cement content 32.25 Cum 274239.00

5.33.2 All works above plinth level upto floor V level

17 5.33.2.1 Concrete of M25 grade with minimum cement content 5.00 Cum 47661.00

18 5.35 Add for using extra cement in the items of design mix 77.55 Qtl 56769.00

over and above the specified cement content therein. 732.03

Total of the Sub-Head - Reinforced Cement Concrete : 1973684.00

Sub-Head : Masonry Work

6.1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth

19 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 87.00 Cum 615936.00

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Rate (Rs) Amount(Rs)

6.4 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

20 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 6.00 Cum 52878.00

Total of the Sub-Head - Masonry Work : 668814.00

Sub-Head : Steel Work

10.25 Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer using

structural steel etc. as required.

21 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, 3834.00 Kg 580123.00

gates and similar works.

10.16.3 CS- Steel work in built up tubular (round, square or 1800.00 Kg 270540.00

18 rectangular hollow tubes etc.) trusses etc., including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including

welding and bolted with special shaped washers etc.

12.50 Providing and fixing precoated galvanised iron profile 120.00 Sqm 85687.00

sheets (size, shape and pitch of corrugation as approved

by Engineer-in-Charge) of total coated thickness

0.50mm (base metal of minimum 0.45mm thickness

with total coating thickness of 0.05mm) with zinc

coating 120 grams per sqm as per IS:277, in 240 mpa

steel grade, 5-7 microns epoxy primer on both side of

the sheet and polyester top coat 15-18 microns. Sheet

should have protective guard film of 25 microns

minimum to avoid scratches during transportation and

should be supplied in single length upto 12 metre or as

desired by Engineer-in- charge. The sheet shall be fixed

using self drilling /self tapping screws of size (5.5x 55

mm) with EPDM seal, complete upto any pitch in

horizontal/ vertical or curved surfaces, excluding the

cost of purlins, rafters and trusses and including cutting

to size and shape wherever required.

Total of the Sub-Head - Steel Work : 936350.00

Sub-Head : Finishing

22 13.2 15 mm cement plaster on the rough side of single or

half brick wall of mix :

13.45 Finishing walls with textured exterior paint of required

24 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 48.00 Sqm 12504.00

sqm) over and including priming coat of exterior primer 260.51

applied @2.20kg/10 sqm.

13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

25 13.61.1 Two or more coats on new work. 450.00 Sqm 62897.00

Total of the Sub-Head - Finishing : 91953.00

Sub-Head : Road Work

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Rate (Rs) Amount(Rs)

26 16.1 Preparation and consolidation of sub grade with power 1533.00 Sqm 294229.00

road roller of 8 to 12 tonne capacity after excavating

earth to an average of 22.5 cm depth, dressing to

camber and consolidating with road roller including 191.93

making good the undulations etc. and re- olling the sub

grade and disposal of surplus earth with lead upto 50

16.47 Painting runway/ taxi track/ apron marking with

adequate nos of coats to give uniform finish with road

marking paint of superior make as approved by the

Engineer-in-charge, i/c cleaning the surface of ail dirt,

scales, oil, grease and other foreign material etc. and

lining out complete.

27 16.47.1 New work (Two or more coats) 100.00 Sqm 16853.00

28 16.68 Providing and laying 60mm thick factory made cement 1371.00 Sqm 1386355.00

concrete interlocking paver block of M -30 grade made

by block making machine with strong vibratory

compaction, of approved size, design & shape, laid in

required colour and pattern over and including 50mm

thick compacted bed of coarse sand, filling the joints

with fine sand etc. all complete as per the direction of

Engineer-in-charge.

29 16.69 Providing and laying at or near ground level factory 69.35 Cum 635116.00

made kerb stone of M-25 grade cement concrete in

position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse

sand), including making joints with or without grooves

(thickness of joints except at sharp curve shall not to

more than 5mm), including making drainage opening

wherever required complete etc. as per direction of

Engineer-in-charge (length of finished kerb edging shall

be measured for payment). (Precast C.C. kerb stone

shall be approved by Engineer-in-charge).

30 16.75 Providing and laying C.C. pavement of mix M-25 with 147.63 Cum 1407131.46

ready mixed concrete from batching plant. The ready

mixed concrete shall be laid and finished with screed

board vibrator , vacuum dewatering process and finally

finished by floating, brooming with wire brush etc.

complete as per specifications and directions of 9531.42

Engineer-in charge. (The panel shuttering work shall be

paid for separately). (Note:- Cement content considered

in this item is @ 330 kg/cum. Excess/less cement used

as per design mix is payable/ recoverable separately).

31 5.35 Add for using extra cement in the items of design mix 73.82 Qtl 54035.10

over and above the specified cement content therein. 732.03

Total of the Sub-Head - Road Work : 3793719.56

Sub-Head : Precast Boundary wall

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Rate (Rs) Amount(Rs)

Fabrication and manufacturing of solid precast concrete

element with provisions of shear keys, connecting

loops, dowel tubes and proper lifting accessories for

walls, beams, slabs, stairs, column etc, of various

thickness, shape and size of different concrete grades

manufactured in controlled factory environment with

approved methodology including moulds (Pallet system,

Tilts form, table moulds, battery moulds, vertical

moulds, beam moulds, column moulds, staircase

26.74 moulds, Facade mould, etc.), mixing, transporting and

placing of concrete, vibrating, curing, finishing, making

necessary cutout/holes of required sizes for services,

yard handling & stacking all complete as per IS

11447:1985 and as per approved shop drawings and

design mix as per the direction of Engineer-in-Charge

(Cost of reinforcement, Mechanical, Electrical and

Plumbing inserts will be paid separately).

32 26.74.1 Concrete grade M-35 (Cement content 370 kgs) 95.92 cum 19571.1 1877211.00

Steel reinforcement for R.C.C. work including

5.22A straightening, cutting, bending, placing in position and

binding all complete above plinth level.

33 5.22A.2 Hard drawn steel wire 1438.76 Kg 93.04 133862.00

26.77 Erection & Installation of Precast/Prestressed Concrete

elements in correct & final position with proper line

level and plumb at site making all arrangements (i.e

cranes, push-pull jacks & all another T & P for lifting

Placing & Alignment of elements, within erection

tolerance as per IS 15916 as per approved shop

drawings and all complete as per the direction of

Engineer-in-Charge but excluding the cost of sim pads,

non shrink grout and steel works i.e hangers. All work

up to fifth floor.

34 26.77.3 Solid concrete wall elements 95.92 cum 2429.37 233019.00

Total of the Sub-Head - Precast Boundary wall : 2244092.00

Digitally signed by PRIYA

Name of the work : Constrcution of 16 Executive Flats & 32 Non Executive Flats for SAIL, GOM, Jharkhand

BOQ for Open Gym Equipments

Sl.No. Description Quantity Unit Rate Amount Remarks

Providing, designing and fixing of LEG PRESS DOUBLE of size 2150 x 590 x1720 mm

(Approx) fabricated with main post of G.I Pipe 114 mm dia and 4 mm thick and rest

of the pipes 40 mm dia and 3 mm thick coated with phosphate solution and

finished with electro-static P.P. powder coating or other similar available material

meeting the required standard. Stainless Steel screws to be used. and at the

contact point with the columns- rubber pads to be used, screw to cover with a

plastic cap, to enhance its security. Seat made of LLDPE /Deep Drawn Steel P.P.

power coated/ of anti ultraviolet. Anti-static decolorization element passing.

Strength, smooth surface, security assurances, weather resistance etc. Paint

process consist of the Pre Galvanized steel pipe, column footing plate screw with a

1 pull-burst. The surface rust, acid degreasing, cleaning, Phosphate rust after a 2 Each 33532 67,064

special process. Throwing sand, Imported plastic Powder with a double surface

household-level spraying layer, electrostatic spray, high-temperature plastic 200

degree baking powder. Smooth surface, UV resistant or as specified by the

manufacture’s specification. All Nut & Bolts used for assembly will be ISI Approved

of Galvanized Iron (GI) with High tensile Strength. The equipment to be fixed on

ground with concrete of minimum strength M-25 and J shape welded bolt and once

the concrete is set, fix the equipment on to it and cover with the base plate. All