SPECIAL REPAIR TO JOINERY IN BUILDING NO. P/89 AND P/59, SPECIAL REPAIR TO ROOF TREATMENT OF BUILDING NO. P/14, P/23, P/43 AND P/90 AND SPECIAL REPAIR TO BUILDING NO. P/24 AT AF STATION BHOWALI.

Amount

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down door or window shutter of any description not exc. 1 Sqm each complete all as specified and directed.

Taking down door or window shutter of any description exc. 1.00 Sqm but not exc. 2.00 Sqm each complete all as specified and directed.

S & F of 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) but having three panels complete all as specified and directed.

M & L for 18/19 mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination and fixed with screws to timber framework complete all as specified and directed.

S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S & F of 75 mm size aluminium anodised hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F of 18/19 mm wide and 6 mm thick teak wood lipping, fixed with nails on external edges of block board or particle board complete all as specified and directed.

S & F of 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc. 3 sqcm but not exc. 6 sqcm complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.

S & F of aluminium anodised powder coated of approved colour, sliding type three track window or ventilator with sliding shutter and frame with and including aluminium grill, 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: - (i) Frame made of section size 92 X 31.75 X 1.30 mm as suitable for bottom, top and sides of window. (ii) Shutter for top, bottom and side rails 40 X 18 X 1.29 mm. (iii) Glass 5 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips of suitable size, 4 Nos. aluminium hold fasts with each window and necessary handles, tower bolt etc. as directed. (iv) Aluminium grill made of 5 mm dia powder coated aluminium section as per design No. DG-102 of make DEDO grill or design No. A-103 duly fixed with aluminium section 50 X 20 X 1.5 mm size. (v) Stainless steel wire cloth having 0.36 mm nominal dia of wire and average width of aperture 1.40 mm duly fixed with tined tacks or galvanised wire staples.

S & F of 150 mm long extruded anodised aluminium alloy handle, cast type complete all as specified and directed.

S & F of 200 mm long (Length of bolt) mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 100 mm long butt hinge cast brass with mild steel hinge pin bright polished type B-11 complete all as specified and directed.

S & F of 300 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S & F of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

S & F of aluminium anodised powder coated of approved colour, sliding type two track window or cup board sliding shutter and frame with and including 5 mm thick plain sheet glass as detailed below complete all as specified and directed: - (i) Frame made of section size 61.85 X 31.75 X 1.3 mm for top, sides and 61.85 X 31.75 X 1.2 mm for bottom. (ii) Shutter made of section size 40 X 18 X 1.29 mm. (iii) Glass 5 mm thick plain sheet glass fixed with rubber gasket and aluminium clips of suitable size with and including necessary handles, tower bolt etc. as directed.

S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.

S & F of 4 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F of 18 to 20 mm thick Bhaislana Zebra black marble work (table rubbed and polished) in steps, jambs, pillars, widow cills, cooking platform and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work including rounding of exposed edges of marble complete all as specified and directed.

Dismantling of existing roof treatment any type including brick tiles laid flat over roof, bedded and pointed in cement mortar with and including removal of the rubish in low lying areas as directed at site complete all as specified and directed.

M & L for 40 mm thick brick tiles laid over and including 15 mm thick cement screed bed in cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.

M & L for fixing only brick tiles any thickness, laid over and including 20 mm thick cement screed bed in cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement with and including cleaning of old brick tiles obtained from dismantling complete all as specified and directed.

M & L for cleaning of existing roof surface including sweeping, cleaning and washing with water to remove dust etc. and providing water proofing roof treatment comprising of the following specifications complete all as specified and directed: - (i) Rendering 15 mm thick cement plaster in cement mortar 1:3 mixed with and including polymer based water proofing compound over roof surface. (ii) Applying a coat of bituminous primer @ 0.30 Liters per Sqm over fully dried plastered surface. (iii) Applying a coat of hot, blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg per Sqm to the entire roof surface over primed surface. Item No. 33.00 Contd......

(iv) Laying of modified polymeric water proofing membrane minimum weight 3.00 Kg per Sqm and minimum 3 mm thick duly reinforced with polyster non woven fabric (weight not less than 150 Gram per Sqm) centre core with minimum 100 mm side and end laps, laying with torch application process as per manufacture’s instructions and strict supervision of manufacture’s technical representative. (v) Further applying a coat of hot, blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg per Sqm to the entire roof surface over membrane.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster consisting in two layers (5 mm thick in cement mortar 1:4 including mixing of water proofing compound as per manufacturer’s instructions over 10 mm thick in cement mortar 1:6) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND SHALL BE MEASURED AND PAID SEPARATELY AS SUPPLY ONLY.

Supply only integral water proofing compound (Powder) complete all as specified.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for Non skid joint free ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for Non skid joint free ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for glazed ceramic coloured tiles 450 mm X 350 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) exc. 15 cm thick (Above ground level) as in sunken portion complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:3 including mixing of water proofing compound as per manufacturer’s instructions finished even and smooth complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND SHALL BE MEASURED AND PAID SEPARATELY AS SUPPLY ONLY.

M & L for preparation of plastered roof surface and applying a coat of bitumenous primer @ 0.30 Litre per Sqm including cleaning of surface complete all as specified and directed.

M & L for applying evenly a tack coat of industrial bitumen 85 / 25 @ 1.20 Kg per Sqm including cleaning of surface complete all as specified and directed.

M & L for providing plain cement concrete, type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

Removing surplus demolished building material to distance exc. 1.50 Kilometre but not exc. 5.00 Kilometre and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer and a thin layer of wall care putty (Minimum thickness 1 mm) complete all as specified and directed.

M & L for complete removal of old decoration by scraping off the same from wall or ceiling surfaces of any description over 10 cm width or girth and applying two coats of distemper oil emulsion over one coat of primer and a thin layer of wall care putty (Minimum thickness 1 mm) complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white with and including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices, fixing bolts and making connection to flushing cistern, flush pipe etc. complete all as specified and directed.

S & F in repairs polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 complete all as specified and directed.

Dismantling of water tank exc. 250 Litre but not exc. 500 Litre capacity complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position complete all as specified and directed.

S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.

S & F of 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F of 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs 15 mm bore fancy type, chromium plated angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F of 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed.

Dismantling of 75 / 100 mm bore cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S & F of 100 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn laid in trenches complete all as specified and directed.

S & F of 75 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn laid in trenches complete all as specified and directed.

S & F of 100 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn fixed to walls complete all as specified and directed.

S & F of 75 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn fixed to walls complete all as specified and directed.

S & F of 100 mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) duly fitted with oval access door complete all as specified and directed.

S & F of 75 mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) duly fitted with oval access door complete all as specified and directed.

S & F of 100 mm bore cast iron bend (any radius) with duck’s foot or heel rest complete all as specified and directed.

S & F of 100 mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches duly fitted with oval access door complete all as specified and directed.

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 100 mm bore pipe complete all as specified and directed.

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 75 mm bore pipe complete all as specified and directed.

S & F as in repairs 75 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S & F in repairs 15 mm bore fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs vitreous china wash basin white, flat back or angle type, size 450 X 300 mm including angle iron fixing brackets, waste pipe, cutting for and pinning in as required complete all as specified and directed.

S & F in repairs 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F of 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces along with wooden beading alround complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet beading of size 15 mm X 5 mm thick stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with decorative PVC beading of size 10 mm X 10 mm (900) and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 100 mm long B-21 type anodised butt hinge extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and directed.

S & F of 125 mm size aluminium anodised hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for providing plain cement concrete type B-0, 1:2:4, (using 12.50 mm graded stone aggregate), as in filling at backside of the pressed steel door frame and the like including necessary rodding as required complete all as specified and directed.

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS-1161(1979) grade St-240 complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F as in repairs 20 mm dia mild steel coloured curtain rod complete all as specified and directed.

S & F of mild steel coloured decorative brackets and designer doms suitable for 20 mm dia curtain rod complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sqcm in section unframed or framed work complete all as specified and directed.

S & F of 50 micron thick black polythene film, laid in floor or DPC over a coat of bitumen primer @ 0.30 To 0.50 Kg per Sqm complete all as specified and directed.

S & F of 20 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light point, fan point, socket outlet point or power point) any type (batten, casing-N-caping, surface conduit or concealed conduit) complete with and including fittings and fixtures such as switches, ceiling rose, pendent, lamp holder, regulator, switch, socket outlet, shade conical etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and distemper / white wash / colour wash etc. complete all as specified and directed.

M & L for point wiring for one light point, fan point, bell point, 5 Ampere socket outlet point on independent board, controlled by one, one way switch with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) drawn into and including PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing and sunk cast iron or 1.2 mm thick pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded copper conductor cable (FRLS) as in earth wire and connecting all metal parts to common earth dolly complete all as specified and directed.

All as per item No. 105.00 hereinbefore but wiring for one 3 / 5 pin 5 Ampere socket outlet point on the same board, controlled with other switches complete all as specified and directed.

All as per item No. 105.00 hereinbefore but wiring for one 3 / 6 pin 15 Ampere socket outlet point on independent board and wiring using with 2.50 sqmm size cables complete all as specified and directed.

S & F of 1100 volts grade heavy duty two single core 6.00 Sqmm size PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into and including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of multi-stranded copper conductor of size 4.00 Sqmm PVC insulated (FRLS) (green colour) cable as earth wire with and including taking down old unserviceable one complete all as specified and directed.

S & F of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed.

S & F of switch piano flush button single pole 230 volts, one-way 5 Ampere complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

S & F of switch piano flush button single pole 230 volts, one-way 15 Ampere complete all as specified and directed.

S & F as in replacement environmental friendly, LED, ultra modern, energy saving, surface mounted, decorative oval shaped bulk head edge lite LED luminaire comprising high brightness LEDs of 10 watt capacity duly pre-fitted with all accessories complete all as specified and directed. MAKE- Havells, Philips, C&S.

Supply and fixing of single phase 'DING-DONG' electric call bell, AC 230 volts complete all as specified and directed.

S & F of bell push flush type single pole one-way 5 Ampere complete all as specified and directed.

S & F of electronic dimmer, 450 watt, 250 volts, flush type, fixed on existing phenolic laminated sheet as required complete all as specified and directed.

S & F of ceiling rose surface bakelite, 65 X 50 mm, three terminals, PVC / polycarbonate insulated body complete all as specified and directed.

S & F of wall / surface mounted type LED light fitting 1 X 20 watt (4 feet long), as per Cat. Part No. LUMILINE BS20WLED 865SPCWH of Havells or BN021C LED20S PSU CDL GRBN021C LED20S PSU CW GR S2 (SmartBright) of Philips or LTDC01220WLED/WD (TARA-M/20W) of C&S complete with all accessories internally pre-wired and including making electric connection with flexible twin core 1.00 sqmm size stranded copper conductor cable from light fitting to ceiling rose with and including taking down old unserviceable one any type complete all as specified and directed.

S & F of lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

S & F of flush mounting factory made Ekinoxe SPN DB's Double door, 8 way (Cat. Part No. 607711 of Legrand or Cat. Part No. A9HSND08 of SCHNEIDER or Cat. Part No. CSDBSPNDD08 of C&S), IP-43 Protection, IK-09 with metal door, with neutral bar, Earth bar and cables ties for cable management fully insulated bus bar with and including taking down old unserviceable one complete all as specified and directed.

S & F of isolator, double pole, 32 Ampere breaking capacity 10 KA, 230 volts with and including taking down old unserviceable one complete all as specified and directed.

S & F of MCB single pole 240 volts, 6 to 32 Ampere 50 Hz, 10 KA, ‘C’ series with and including taking down old unserviceable one complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth lead 4 mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions Item No. 123.00 Contd......

with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel TMT bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed. NOTE: - ON TESTING AFTER COMPLETION OF JOB, IF DESIRED EARTH RESISTANCE (i.e. LESS THAN ONE OHM) IS NOT OBTAINED, THE EARTHING SHALL BE REDONE BY THE CONTRACTOR WITHOUT ANY EXTRA COST TO GOVT.

M/s J P Traders

Ramsons

M/s M Aali construction co