Rainshelter with Irrigation system at DAF,Chungathara

Amount

Appendix-I - Construction of Rain shelter at DAF Chungathara

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

od2943/2019_2020 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position including welding etc. complete.(based on )

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od4649/2019_2020 : Providing and fixing PVC gutters, including fittings with clamps at 1.00 m spacing.

od4535/2019_2020 : Supplying and laying 75% shade net inside of the rain shelter tying with GI wire and excellent elasticity with out damaging the shade net.

od4537/2019_2020 : Supplying and and fixing UV stabilized Polyethlene film 200 microne thick.I R blocking,Anti drip /fog diffused multilayer on the G.I. truss work with aluminium locking profile and zig zag spring galvanized with hex washer etc..compleate, but excluding the cost of aluminium locking profile and zig zag spring.

od4536/2019_2020 : Supplying of aluminium locking profile with zig sag spring with steel screw including cost of material and conveyance etc complete.

50.18.9.16.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall

od4662/2019_2020 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 50x50x50mm dia Tee

od4663/2019_2020 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-50 mm dia Bend

od4684/2019_2020 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 40 mm dia Bend

od4685/2019_2020 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 40 mm dia End cap

od4679/2019_2020 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 50x40 mm dia Reducer

od4651/2019_2020 : supplying and fitting 16mm end cap

od4652/2019_2020 : supplying and fixing 63 mm air releasing valve

od4653/2019_2020 : Supplying and fixing poly grommet take off 16mm for taking connection from pvc sub main

od4655/2019_2020 : Supplying and laying micro sprinkler with 1.2m PVC support and throwing dia 1.5 - 2m , 40-60 lps or nearest available size

od4680/2019_2020 : Supplying four way fogger emitters 5 to 7 LHP leak prrof snap fit joint fine droplets of average 90 microns, counter weight operating pressure 22 psi at 1.5 m c/c

od4658/2019_2020 : Supplying 6 mm Micro tube for connecting micro sprinkler and 16 mm laterals

od4656/2019_2020 : Supplying and fixing 50mm dia. PVC flesh valve .

od4681/2019_2020 : Spplying and fixing 40 mm PVC ball valve

od4657/2019_2020 : Supplying and fitting G.I. hose clip 50mm including all charges

od4643/2019_2020 : Supplying 6 mm connector for taking connection from 16 mm laterals to 6 mm micro tube

od4612/2019_2020 : Supplying and laying 16mm LLDP lateral pipe

od4682/2019_2020 : Supplying and fitting 50mm dia. Disc filter including all labour charge etc.

od4687/2019_2020 : Supplying and providing nilon rope for supporting laterals including al labour charges etc. complete. .

Appendix-2 -Constuction of Poly house at DAF Chungathar

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

od2943/2019_2020 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position including welding etc. complete.(based on )

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od3009/2019_2020 : Supplying and and fixing UV stabilized Polyethlene film 200 microne thick.I R blocking,Anti drip /fog diffused multilayer on the G.I. truss work with aluminium locking profile and zig zag spring galvanized with hex washer etc..compleate, but excluding the cost of aluminium locking profile and zig zag spring.

od3010/2019_2020 : Supplying of Aluminium locking profile with zig-zag spring with steel screws including cost of material and conveyance etc.. complete.

od3222/2019_2020 : Supplying four way fogger emitters 5 to 7 LHP leak prrof snap fit joint fine droplets of average 90 microns, counter weight operating pressure 22 psi at 1.5 m c/c

od3012/2019_2020 : Providing and fixing PVC gutters, including fittings with clamps at 1.00 m spacing.

od3013/2019_2020 : Supplying and fixing 40 mesh insect proof netting sufficient cover the sides and vents including all cost of material, labour charges etc. complete.

od3223/2019_2020 : Supplying and erecting Poly coated Shade net 60 % shade for green House top covering.

od3564/2019_2020 : supplying and laying 16mm end cap

od3563/2019_2020 : Supplying 6 mm connector for taking connection from 16 mm laterals to 6 mm micro tube

od3562/2019_2020 : Supplying and fixing poly grommet take off 16mm for taking connection from pvc sub main

od3561/2019_2020 : supplying and fixing 63 mm air releasing valve

od3567/2019_2020 : Supplying and fixing Flush valve (PVC) 50mm including all charges

od3568/2019_2020 : Supplying and laying micro sprinkler with 1.2m PVC support and throwing dia 1.5 - 2m , 40-60 lps or nearest available size

50.18.9.16.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall

od4532/2019_2020 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -50x50x50 mm dia Tee

od4533/2019_2020 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 50mm dia Bend

od4530/2019_2020 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -40 mm dia End cap

od3572/2019_2020 : Supplying and fitting G.I. hose clip 50mm including all charges

od3569/2019_2020 : Supplying and laying 16mm LLDP lateral pipe

od3570/2019_2020 : Supplying and fitting Disc filter with fittings etc. complete (20m3/hr)

od4688/2019_2020 : Supplying and providing nilon rope for supporting laterals including al labour charges etc. complete. .

Appendix-3-Supplying and fixing PVC water tank

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

13.3.1 : 20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)

od4677/2019_2020 : Supplying and fitting of 1.5 hp electric motor pump set,20m head with ISI mark 5 star or nearest star rating including all neccessary items.

od4678/2019_2020 : Supplying and installing P V C water storage tank.

M. ABDUL RASHEED

Bidder Name

M. ABDUL RASHEED

M. NASEEM RASHEED