FDR of road Jalabassa to Bandharima Ch 09.50 Km to Ch 28.50 Km under the jurisdiction of Jampui Hill Sub-Division, PWD Rand B during the year 2026-2027 SH Providing, fitting and fixing of bailey bridge spare parts, Brick soling and Paver blocks etc.

60 mm thick factory made c.c interlocking paver block of M -30 Grade Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of sand, filling the joints with fine sand etc. all complete as per specification and approval/ direction of the Engineer-in-charge.

Providing fitting & fixing of transome clamp in/c welding.

Providing fitting & fixing of panel pin.

Providing fitting & fixing of Decing Nul Bolt.

Providing fitting & fixing of Bracing Bolt.

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Technical Specification clause 201. (I) By Manual Means (A) In area of non-thorny jungle

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5.

Land Slide Clearance in soil Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side as per MoRT&H technical specification Clause 3000.

Single bamboo palasiding/walling of whole 2nd class bamboo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying with wire complete and struts 1.5 m apart longitudinally and providing bitumen drum sheet walling fixed with nails as per drawing and MoRD technical specification Clause 1302.5. (A) Driven at least 900 mm below ground and 1200 mm above ground on average.

Providing and placing polythene (of minimum wall thickness of 500 micron) bags filled with 1:8 cement mortar ( 1 cement : 8 sand) of minmum qty of 0.034 cum) and properly manually stitched to avoid any leakage of cement mortar as per direction of the Engineer-in-Charge.