Repairing and renovation Work diff.Hospital building Routine Maintanance and new required Civil work of Sheth L G Hospital Campus.

Name of Work:- Repairing and renovation Work diff.Hospital building Routine Maintanance and new

required Civil work of Sheth L G Hospital Campus.

AHMEDABAD MUNICIPAL CORPORATION

AMC MET/HOSPITAL

Name Of Work :- Repairing and renovation Work diff.Hospital building Routine Maintanance and new required

Civil work of Sheth L G Hospital Campus.

Items Rate Amount

S.R.NO. Qty Per

Excavation for foundation upto 1.5 m

depth including sorting out and stacking

of useful materials and disposing off the

1 80.00 excavated stuff upto 50 Meter lead.(A) Loose cu.m 115.92

or soft soil.( iteam code 04001A ,S.O.R

Ahemdabad City 2023-24)

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

2 50.00 upto 50 Meter lead.(B) Dense or Hard soil.( cu.m 148.19

iteam code 04001B ,S.O.R Ahemdabad City

Excavation for foundation for depth from 1.5 m

to 3.0 m including sorting out and stacking of

useful materials and disposing off the

3 15.00 excavated stuff upto 50 Meter lead.(A) Loose cu.m 128.52

or soft soil.( iteam code 04002A ,S.O.R

Ahemdabad City 2023-24)

Excavation for foundation for depth from

m to 3.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense

or Hard soil.( iteam code 04002B ,S.O.R

Ahemdabad City 2023-24)

Excavation for foundation for depth from

m to 5.0 m including sorting out and

stacking of useful materials and disposing

5 20.00 off the excavated stuff upto 50 Meter cu.m 141.11

lead.(A) Loose or soft soil.( iteam

code04003A,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from

m to 5.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense

or Hard soil.( iteam code04003B,S.O.R

Ahemdabad City 2023-24)

Filling available excavated earth (excluding

rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm.

in depth consolidating each disposited layer

by ramming and watering.( iteam code

4006,4.12,S.O.R Ahemdabad City 2023-24)

Filling in plinth with sand under floors

including watering ramming, consolidating and

8 70.00 dressing complete.(iteam code cu.m 455.63

4007A,4.24,S.O.R Ahemdabad City 2023-24)

Filling in foundation and plinth with

murrum or selected soil in layers of 20cm.

9 40.00 thickness including watering, ramming and cu.m 286.20

consolidating etc. complete.(iteam code

04008A,S.O.R Ahemdabad City 2023-24)

Filling in foundation and plinth with brick Bats

Chhara in layers of 20cm. thickness including

10 30.00 watering, remming and consolidating etc. cu.m 594.61

complete. (iteam code 04009A,S.O.R

Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for

cast in situ piles) and getting out the soil and

disposal of the surplus excavated soil as

11 1.00 directed within a lead of 50 Meter for following Each 1078.13

diameter of pipes.(i)200 mm.(iteam code

04010A, 4.27,S.O.R Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for

cast in situ piles) and getting out the soil and

disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following

diameter of pipes.(ii) 250 mm.(iteam code

04010B , 4.27,S.O.R Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for

cast in situ piles) and getting out the soil and

disposal of the surplus excavated soil as

13 1.00 directed within a lead of 50 Meter for following Each 1509.00

diameter of pipes.(iii) 300 mm (iteam code

04010C , 4.27,S.O.R Ahemdabad City 2023-24)

Extra for under reaming inside the bore Holes

for under reamed piles of following

14 1.00 Diameter.(i) 200 mm(iteam code 04011BA, Each 430.32

4.28,S.O.R Ahemdabad City 2023-24)

Extra for under reaming inside the bore Holes

for under reamed piles of following

15 1.00 Diameter.(ii) 250 mm(iteam code 04011B , Each 516.39

4.28,S.O.R Ahemdabad City 2023-24)

Extra for under reaming inside the bore Holes

for under reamed piles of following

16 1.00 Diameter.(iii) 300 mm (iteam code 04011C, Each 642.30

4.28,S.O.R Ahemdabad City 2023-24)

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

17 5.00 upto 50 Meter lead.(A) Loose or soft soil. cu.m 201.81

(EXECUTED WITH MANUAL LABOUR)(iteam

code 04B001A ,S.O.R Ahemdabad City 2023-

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

18 5.00 upto 50 Meter lead.(B) Dense or Hard soil. cu.m 259.14

(EXECUTED WITH MANUAL LABOUR)(iteam

code 04B001B,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth (iteam code

05003A,5.3.2 ,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone

and curing complete excluding cost of

formwork in (A) Foundation and Plinth (iteam

code 05004A,5.3.3 ,S.O.R Ahemdabad City

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A)

Wall Caps / Coping (iteam code 05005A,5.3.14

,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:5:10

(1- Cement : 5- Coarse sand : 10- hand

broken stone aggregates 40 mm nominal

22 5.00 size) and curing complete excluding cost cu.m 2492.51

of formwork in (A)Foundation and Plinth

(iteam code 05006A,5.3.4 ,S.O.R Ahemdabad

Providing and laying cement concrete

1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm

nominal size) and curing complete

excluding cost of formwork in (A)

Foundation and Plinth (iteam code

05010A,5.3.13 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete

1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm

nominal size) and curing complete

24 10.00 excluding cost of formwork in cu.m 3661.30

(B)Independent piers, columns, and pillars,

upto floor two level (iteam code

05010BA,5.3.13 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete work

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

25 10.00 and reinforcement for reinforced concrete cu.m 3923.53

work in (A) Foundations, footings, Base or

columns and Mass concrete (iteam code

05011AA,5.4.1 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete work

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

26 18.00 and reinforcement for reinforced concrete cu.m 4012.47

work in (B) Slabs, landing, shelves, Balconis

Lintels, Beams, Girders and Cantilever upto

floor two level. (iteam code 05011BA,5.4.1

,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete work

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

27 6.00 and reinforcement for reinforced concrete cu.m 4012.47

work in (D) Columns, Pillars posts and struts

upto floor two level. (iteam code

05011DA,5.4.1 ,S.O.R Ahemdabad City 2023-

Providing TMT Bar FE 415 reinforcement for

R.C.C. work including bending, binding and

28 600.00 placing in position complete upto floor two kg 66.59

level (iteam code 05014BA,5.4.11 ,S.O.R

Ahemdabad City 2023-24)

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

29 600.00 placing in position complete upto floor two kg 75.46

level (iteam code 05014C,5.4.11 ,S.O.R

Ahemdabad City 2023-24)

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of

columns and Mass concrete (iteam code

05024AA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

31 6.00 reinforcement for reinforced concrete cu.m 4484.17

work in (B) Walls, from top of foundation level

upto floor two level (iteam code 05024BA,5.8.2

,S.O.R Ahemdabad City 2023-24)

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

32 15.00 work in (C) Slabs ,landing, shelves,Balconies cu.m 4460.36

Lintels, Beams, Girders and Cantilever

upto floor two level. (iteam code

05024CA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts

upto floor two level. (iteam code

05024DA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

34 15.00 reinforcement for reinforced concrete cu.m 5418.91

work in (E) Staircases excluding landing upto

floor two level (iteam code 05024EA,5.8.2

,S.O.R Ahemdabad City 2023-24)

Providing and laying controlled cement

M.200 and curing complete excluding the

cost of formwork and reinforcement for

reinforced concrete work in (K) Vertical and

Horizontial its upto floor two level. (iteam

code 05024KA,5.8.2 ,S.O.R Ahemdabad City

Brick work using common burnt clay building

bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and

36 120.00 plinth in Cement Mortar 1:5. (1- Cement : 5 - cu.m 4345.02

fine sand)(A) Modular (iteam code

06001AA,6.12 ,S.O.R Ahemdabad City 2023-24)

Extra for brick work in super structure above

plinth level upto floor two level (A) Modular

(iteam code 06006A,6.19,S.O.R Ahemdabad

Extra for brick work in super structure above

floor two level Item No. 1(6.12) (A) Modular Floor per

(iteam code 06007A1A,6.2,S.O.R Ahemdabad Cu.m

(i) Half brick masonry in common brunt clay

building bricks having crushing strengthnot less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1

39 350.00 Cement:4-coarsesand) in foundationandplinth Sq.m 584.68

(A) Modular (iteam code 06008A1A,6.3,S.O.R

Ahemdabad City 2023-24)

Extra for half brick masonry in super structure

above plinth level upto floor two level. (A)

40 90.00 Modular(iteam code 06010A,6.32,S.O.R Sq.m 47.85

Ahemdabad City 2023-24)

Half brick thick honey- comb brick work

with common burnt clay building bricks

having crushing strength not less than

41 30.00 Kg/Sq.Cm. (ii) In Cement Mortar 1:5 ( 1- Sqm 298.38

Cement : 5 - coarse sand)(iteam code

0612BA,6.55,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. Height of propping and

centering below supporting floor to ceiling

42 20.00 not exceeding 4 M. and removal of the Sqm 171.68

same for in situ reinforced concrete and

plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass

concrete.(iteam code 09001AA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. Height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (B) Flat surfaces such as

soffits of supspened floors slabs Landings

and the like. (1) Floors etc. upto 200 mm in

thickness.(iteam code09001B1A,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. Height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (B) Flat surfaces such as

soffits of suspended floor roof slabs Landings

and the like. (2) Floors etc. above 200mm in

thickness.(iteam code 09001B2A,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (C) Vertical surface

such as walls (any thickness) partitions and

the like including attached buttresses &

string course & the like.(iteam code

09001CA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

46 10.00 not exceeding 4 M. and removal of the Sqm 297.68

same for in situ reinforced concrete and

plain concrete work in. (G) Columns

PillarsPosts and struts. (1) Square Rectangular

Polygonal in plan.(iteam code

09001G1A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

47 10.00 not exceeding 4 M. and removal of the Sqm 422.10

same for in situ reinforced concrete and

plain concrete work in. (G) Columns

PillarsPosts and struts. (2)Circular or curved in

Plan.(iteam code 09001G2A,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (H) (1) Sides and soffits

of Beams Beam Haunchings cantilevers

Girders Bressumers and Lintels not exceeding

1 M. in Depth.(iteam code 09001H1A,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (H) (2) Sides and soffits

of Beams Beam Haunchings canti-levers

Girders Bressumers and Lintels exceeding

1M.in Depth.(iteam code 09001H2A,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

50 10.00 not exceeding 4 M. and removal of the Sqm 67.73

same for in situ reinforced concrete and

plain concrete work in. (I) Edges of slabs and

Breaks in floors and walls.(iteam code

09001IA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (K) Small

surfaceassuch as cantiever brackets and

ends of steps caps and basses to pilasters

and Columns and the like.(iteam code

09001KA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

52 10.00 not exceeding 4 M. and removal of the Sqm 155.78

same for in situ reinforced concrete and

plain concrete work in. (L) Chullah

Hoods, weather shades Chhajjas Corbels etc.

including edges.(iteam code 09001LA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (M) Staircase with

sloping or stepped soffits including risers

and stringers excluding landing.(iteam code

09001MA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete and

plain concrete work in. (Q) Vertical fins and

vertical sun breakers.(iteam code

09001QA,9.1,S.O.R Ahemdabad City 2023-24)

Extra for additional height of propping

and centering where the height of

propping and centering exceeds 4 .O M

between supporting floor to ceiling including

temporary brick or stone pillars for supporting

as required. (i)Height more than 4.0 M.and

upto 5.0 M.(iteam code 09002AA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 35 mm thick

shutters for Doors, windows and clear story

windows including anodised alluminium butt

56 5.00 hinges with necessary screws. (A) Indian Teak Sqm 3211.96

Wood (ii) Fully Glazed.(iteam code

10004BA,10.12,S.O.R Ahemdabad City 2023-

Providing and fixing in position collapsible

steel shutters with vertical channels 20 x

x 2 mm braced with flat iron diagonals 20 x

mm size with top and bottom rails of T_rin

40x 40 x 6 mm with 38mm dia, steel

pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including

applying a priming coat of red lead

paint.(iteam code 11003A,11.6,S.O.R

Ahemdabad City 2023-24)

Providing and laying 40mm thick marble

chips flooring rubbed and polished (I.E.

terrazo) to granolithic finish with under

layer 30mm thick cement concrete 1:2:4 (1-

Cement:2-coarse sand :4- graded stone

aggregate 10 mm and down gauge) and top

layer 10mm thick with white, black or white

58 100.00 and blak marble cihps of required sizes Sqm 749.70

from 1mm to 4mm nominal size laid in cement

marble powder mix 3:1 (3-Cement : 1-Marble

powder by weight) in proportion of 4:7 (4-

Cement :7-marble chips by volume) (A)

Dark shade pigment with ordinary cement

(In top layer only)(iteam code

14001AA,14.2,S.O.R Ahemdabad City 2023-24)

Providing and laying Vitrified tiles 8 to 10 mm

, 36'' x 36'' in flooring treads of steps and

landing laid on a bed of 12mm thick cement

mortar 1:3 (1- cement : 3-coarse sand )

finishing with flush pointing in white

cement.(iteam code 14008DA,14.29,S.O.R

Ahemdabad City 2023-24)

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by

adhesive material including dismentaling of

existing flooring and jointed with color

cement slurry including finised with flush

pointing & cleaning the surface etc.

complete for light shade(iteam code

14022A,S.O.R Ahemdabad City 2023-24)

Providing and laying white glazed tiles 6mm

thick in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3

61 300.00 (1-cement : 3- coarse sand ) finishing with Sqm 908.17

flush pointing in white cement.(iteam code

14008AA,14.29,S.O.R Ahemdabad City 2023-

Providing and laying white glazed tiles 6mm

thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement :

3-coarse sand) and jointed with white cement

slurry(iteam code 14009AA,14.32,S.O.R

Ahemdabad City 2023-24)

Providing and laying coloured glazed tiles of

the size 300 mm x 200 mm x 8 mm / 300 mm x

450 mm x 8 mm in skirting, risers of steps and

63 130.00 dedo on 10 mm. thick cement plaster 1:3 (1 Sqm 1426.95

cement : 3 coarse sand) & jointed with white

cement slurry.(iteam code 14036,S.O.R

Ahemdabad City 2023-24)

Providing and laying marble stone slab flooring

over 20mm (average)base of cement

mortar 1:6 (1- cement : 6 coarse sand) or

L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid

and jointed with gray cement slurry including

rubbing and polishing complete. (A) Marble

slab 25mm thick(iteam code

14011A,14.36,S.O.R Ahemdabad City 2023-24)

Providing and laying polished Kota stone

slab flooring over 20mm (Average) thick base

of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match

the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick (iteam

code 14012AA,14.43,S.O.R Ahemdabad City

Providing corrugated G.I. sheet of class-3

roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete

excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.(iteam code

15001A,15.1,S.O.R Ahemdabad City 2023-24)

Providing valleys 900mm overall in plain

1.6mm thick G.I. sheet fixed with G.I. J or L

Hooks, Bolts and nuts glavanised iron J or L

67 20.00 Hooks Bolts and nuts 8mm dia G.I. Sqm 1042.78

Limpet and bitumen washers

complete.(iteam code 15003A,15.8,S.O.R

Ahemdabad City 2023-24)

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto

68 800.00 floor two level and finished even and Sqm 137.34

smooth in (iii) Cement mortar 1:6 (1-

cement:6-sand)(iteam code17002C,17.6,S.O.R

Ahemdabad City 2023-24)

Providing 20mm thick cement plaster in single

coat on single or half brick walls for

interior plastering upto floor two level and

69 700.00 finished even and smooth in (iii) Cement Sqm 165.38

mortar 1:6 (1-cement:6-sand)(iteam code

17003C,17.61,S.O.R Ahemdabad City 2023-24)

White washing with lime on wall surface (two

coats) to give an even shade including

thoroughly booming the surface to

70 2000.00 remove all dirt, dust; mortar drops and Sqm 12.29

other foreign matter.(iteam

code18001,18.11,S.O.R Ahemdabad City 2023-

Removing dry or oil bound distemper by a

washing and scraping and sand papering the

wall surface smooth including necessary

71 5000.00 repairs to scratches Sqm 11.19

complete.(iteam code18014,18.33,S.O.R

Ahemdabad City 2023-24)

Distempering with dry distemper of

approved brand and manufacture (two coats)

and of required shade on wall surfaces of given

an even shade, over and including a priming

72 6000.00 coat of whiting after thoroughly brooming Sqm 46.94

the surface free from mortar dropping and

other foreign matter.(iteam code

18016,18.38,S.O.R Ahemdabad City 2023-24)

Finishing wall with water proofing cement

paint of on wall surfaces (Two coats) to

give an approved brand and manufacture

and of required shape even shade after

thoroughly brushing the surface to remove all

dirt and remains of loose powered

materials.(iteam code 18027,18.51,S.O.R

Ahemdabad City 2023-24)

Extra over Item 73 for every subsequent

coat of water proofing cement paint of

74 100.00 approved brand and manufacture.(iteam code Sqm 31.82

18028,18.53,S.O.R Ahemdabad City 2023-24)

Extra over item 73 for finishing with cement

paint on ceiling and sloping roofs.(iteam

code18029,18.54,S.O.R Ahemdabad City 2023-

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

76 5000.00 brushing the surface free from mortar Sqm 78.44

droppings and other foreign matter and

sand papered smooth.(iteam code

18031,18.57,S.O.R Ahemdabad City 2023-24)

Extra over item 76 for every subsequent

coat of wall painting with plastic emulsion pain

of approved brand.(iteam code

18032,18.59,S.O.R Ahemdabad City 2023-24)

Extra over item 76 for painting with

plastic emulsion paint of approved brand on

ceilings andmsloping roofs.(iteam code

18033,18.6,S.O.R Ahemdabad City 2023-24)

Painting two coats (excluding priming coat) on

new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface

an even shade including cleanicn the

surface of all dirt, dust and other foreign

matter.(iteam code 19002,19.7,S.O.R

Ahemdabad City 2023-24)

Painting one coats (excluding priming

coat) on previously painted steel and other

metal surface with enamel paint, brushing to

80 500.00 give an even shade including cleaning the Sqm 54.35

surface of all dirt, dust and other foreign

matter.(iteam code 19003,19.11,S.O.R

Ahemdabad City 2023-24)

Painting two coats (excluding priming coat) on

new wood and wood based surface with

ready mixed paint, brushing, oil, gloss, semi

gloss to give and even shade including

cleaning of all dust, dirt and other foreign

matter sand papering and stopping.(iteam

code 19014,19.77,S.O.R Ahemdabad City 2023-

Varnishing two coats (excluding priming

coat) on new wood and wood based surface

under coating with flatting varnish and

finished coat with varnish to give an even

82 500.00 surface including cleaning the surface of all Sqm 54.18

dirt, dust and sand papering so as to produce a

smooth dry surface.(iteam code

19015,19.84,S.O.R Ahemdabad City 2023-24)

Extra over Above item 82 for every

83 500.00 subsequent coat of varnish.(iteam code Sqm 30.68

19016,19.86,S.O.R Ahemdabad City 2023-24)

Applying two coats of putty & two coats of

primer of approved brand and manufacture

on new wall surface to give an even shade

84 6000.00 including thoroughly brushing the surface free sqm 40.19

from mortar dropping and other foreign

matter and sand papered smooth.(iteam code

19032,S.O.R Ahemdabad City 2023-24)

Demolition and disposal of unserviceable

materials with all lead and lift.(i) Lime

85 30.00 concrete.(iteam code 20001B,20.1,S.O.R cu.m 603.23

Ahemdabad City 2023-24)

Demolition including stacking of

serviceable materilas and disposal of

86 25.00 unserviceable materials with all lead and lift. cu.m 1047.38

(i) R.C.C. work(iteam code 20002,20.3,S.O.R

Ahemdabad City 2023-24)

Demolition of Brick work and stone

masonry including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift. (i) In Lime

Mortar.(iteam code 20003A,20.11,S.O.R

Ahemdabad City 2023-24)

Demolition of Brick work and stone

masonry including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.(ii) In Cement

Mortar.(iteam code 20003B,20.11,S.O.R

Ahemdabad City 2023-24)

Dismentaling tiled of stone floors laid in

mortar including stacking of serviceable

89 600.00 materilas and disposal of unserviceable Sqm 47.25

materials with all lead and lift.(iteam code

20005,20.23,S.O.R Ahemdabad City 2023-24)

Dismentaling of wooden floors including

stacking of serviceable materilas and disposal

90 15.00 of unserviceable materials with all lead and Sqm 70.88

lift.(iteam code 20006,20.25,S.O.R Ahemdabad

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materilas and disposal of

91 101.00 unserviceable materials with all lead and lift.(i) Sqm 47.25

G.I.sheet roofing.(iteam code

20007A,20.27,S.O.R Ahemdabad City 2023-24)

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materilas and disposal of

92 200.00 unserviceable materials with all lead and Sqm 53.55

lift.(ii) A.C. sheet roofing.(iteam code

20007B,20.27,S.O.R Ahemdabad City 2023-24)

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment

93 300.00 etc. complete and stacking them within all Each 185.85

lead and lift.(i) Not exceeding 3 Sq.M. in

area.(iteam code 20013A,20.49,S.O.R

Ahemdabad City 2023-24)

Dismentling C.I. pipes G.S.W.pipes abd

A.C. rain water pipes with fittings and

clamps including stacking the materials with

all lead and lift ( for any dia, of pipe)(iteam

code 20015,20.56,S.O.R Ahemdabad City 2023-

Dismantling santtary fittings like wash basin

. W.C. pan Indian and European type,

95 120.00 flushing tank etc. including stacking the Each 401.63

materials with all lead and lift.(iteam code

20016,S.O.R Ahemdabad City 2023-24)

Dismentling barbed wire in fencing

including making rolls and also including

dismentling fencing posts including all earth

work concrete in base and making good the

96 250.00 disturbed ground stacking useful materials as Rmt 66.15

directed and disposing as directed and

disposing of the unserviceable materials

with all lead and lift.(iteam code

20014,20.51,S.O.R Ahemdabad City 2023-24)

Providing and fixing 1.20 Metre high fencing

with 2.0 Metre long M.S. Angle posts 40mm x

40 mm x6 mm and oil painting 3 coats fixed

at 2.5 Mt,C/c. with five Horizontan lines and

two diagonals of galvanised steel barbed wire

97 120.00 weighting 9.38 Kg. per 100 Metre, strained Rmt 385.40

and fixed to posts with G.I,staples

including fixing the postsin ground with

M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

complete.(iteam code 22001,22.2,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube

fitting and clamps including making good the

wall ceiling and floor.(A) 15mm(iteam code

23001AA,23.2,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube

fitting and clamps including making good the

wall ceiling and floor.(B) 20mm(iteam code

23001BA,23.2,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube

fitting and clamps including making good the

wall ceiling and floor.(C) 25mm(iteam code

23001CA,23.2,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes

of the following outside Dia. Low densidy,

complete with special falnge compression

type fittings, wall clipsetc. including making

good the wall ceiling and floor.(A) 20mm(iteam

code 23004A,23.8,S.O.R Ahemdabad City 2023-

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes

of the following outside Dia. Low densidy,

complete with special falnge compression

type fittings, wall clipsetc. including making

good the wall ceiling and floor.(B) 25mm(iteam

code 23004B,23.8,S.O.R Ahemdabad City 2023-

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(C) 32mm(iteam code 23004C,23.8,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(F) 75mm(iteam code 23004F,23.8,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm(iteam code

23004G,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing cast iron spigot and socket

waste and ventilating pipes of the

following nominal size.(B) 75mm dia.(iteam

code 23005BA,23.79,S.O.R Ahemdabad City

Providing and fixing cast iron spigot and socket

soil, waste and ventilating pipes of the

107 5.00 following nominal size.(C) 100mm dia.(iteam Rmt 881.64

code 23005CA,23.79,S.O.R Ahemdabad City

Providing and fixing in position cowel

108 10.00 went to pipes.(B) 75mm dia.(iteam code Each 385.88

23006B,S.O.R Ahemdabad City 2023-24)

Providing and fixing in position cowel

109 10.00 went to pipes.(C) 100mm dia(iteam code Each 496.90

23006C,S.O.R Ahemdabad City 2023-24)

Providing and fixing cast iron (Spun) Nahni

trap of the following nominal diameter of

self cleaning design with C.I. screaed down

110 30.00 or higned grating including cost of cutting and Each 600.08

making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.(iteam code

23008,23.857,S.O.R Ahemdabad City 2023-24)

Providing and fixing water closet

squatting Pan (Indian type W.C. Pan) size

580mm (Earthwork, bed concrete, foot reste

111 28.00 and trap to be measured and paid for Each 926.10

separately) (A) Vitreous China.(I) Long

pattern = White colour(iteam code

23009,23.111,S.O.R Ahemdabad City 2023-24)

Providing and fixing wsh down water

closet (European type, W.C. Pan) with integral

P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1-Cement : 1-fine

sand) (Seal and cover to be measured and paid

for separately)(A) vitreous China Pattern :(i) in

white colour(iteam code 23010,23.112,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 100mm size P or S

trap for water closet squatting pan including

jointing the trap with the pan and soil pipe

113 80.00 in cement Mortar 1:1 (1-Cement : 1-Fine Each 311.85

sand)(A) Vitreous China.(iteam code

23011,23.113,S.O.R Ahemdabad City 2023-24)

Providing and fixing wash basin with single

hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and

making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In

white colour.(iteam code 23018,23.127,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 600mm x 450mm bevelled

edge mirrror of superior glass mounted on

6mm thick A.C. sheet or plywood sheet and

115 5.00 fixing to wooden pluge with C.P. brass screws Each 825.48

and washers.(iteam code 23024,23.143,S.O.R

Ahemdabad City 2023-24)

Providing and fixing C.P. brass towel rail

comlete with C.P. brass brackets fixed to

116 20.00 wooden plugs with C.P. brass scews.(B) 600mm Each 597.22

x 20mm size.(iteam code 23025,23.144,S.O.R

Ahemdabad City 2023-24)

Providing and fixing screw down bib taps

of following size.(A) Brass screw down bib tap

117 120.00 polished bright. (i) 15mm dia.(iteam code Each 184.98

23028A1,23.92,S.O.R Ahemdabad City 2023-

Providing and fixing screw down bib taps

of following size.(B) Brass chromium plated

118 12.00 screws down Bib Tap. (i) 15mm dia.(iteam code Each 184.98

23028B1,23.92,S.O.R Ahemdabad City 2023-

Providing and fixing brass screw down stop

119 30.00 15mm dia.(iteam code 23030A,23.96,S.O.R Each 203.79

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

120 12.00 fullway wheel valve.(A) 15mm dia.(iteam code Each 184.98

23028A1,23.92,S.O.R Ahemdabad City 2023-

Providing and fixing Gun metal check or non-

fullway wheel valve.(B) 20mm dia.(iteam code

23031B,23.99,S.O.R Ahemdabad City 2023-24)

Providing and fixing chromium plated brass

half trun flush cock of approved quality

122 60.00 including fixing in pipe line etc. complete.(i) Each 252.26

20mm dia.(iteam code 23032A,S.O.R

Ahemdabad City 2023-24)

Providing and fixing chromium plated brass

half trun flush cock of approved quality

123 60.00 including fixing in pipe line etc. complete.(ii) Each 261.16

25mm dia.(iteam code 23032B,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Urinal or approved

quality including conecting the Urinal with

waste pipe , tap etc. complete.(A) White

124 120.00 earthenware flat back or corner type size Each 1026.01

430mm x 260mm x 350mm.(iteam code

23033,23.122,S.O.R Ahemdabad City 2023-24)

Providing and fixing Urinal of approved

quality including connection with trap and

with integral longitudinal flush pipe.(A)

125 120.00 Squating plate pattern white earthenware Each 1535.63

550mm x 300mm.(iteam code

23034,23.124,S.O.R Ahemdabad City 2023-24)

Providing and fixing ball cock of approved.

quality as directed.(A) Copper Metal (i)

126 30.00 25mm dia.(iteam code 23037A1,S.O.R Each 131.57

Ahemdabad City 2023-24)

Providing and fixing ball cock of approved.

quality as directed.(A) Copper Metal (ii)

127 30.00 50mm dia.(iteam code 23037A2,S.O.R Each 187.96

Ahemdabad City 2023-24)

Providing and fixing ball cock of approved.

128 10.00 as directed.(B) Abonite (i) 25mm dia.(iteam Each 101.89

code 23037B1,S.O.R Ahemdabad City 2023-24)

Providing and fixing ball cock of approved.

129 10.00 as directed.(B) Abonite (ii) 50mm dia.(iteam Each 136.52

code 23037B2,S.O.R Ahemdabad City 2023-24)

Providing and fixing plastic seat and cover for

wash down water closer with C.P. brass

130 100.00 hinges and rubber buffers. (B) Black plastic Each 288.45

seal and cover.(iteam code 23017,23.121,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Rubber plug for sink or

131 80.00 wash basin.(iteam code 23035 ,23.134,S.O.R Each 16.98

Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

132 600.00 nominal bore tube fittings and clamps Rmt 165.21

including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.(iteam code

23055 ,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

133 300.00 nominal bore tube fittings and clamps Rmt 202.97

including making good the wall, ceiling and

floor etc. complete. [B] 20 mm.(iteam code

23056 ,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

134 600.00 nominal bore tube fittings and clamps Rmt 247.25

including making good the wall, ceiling and

floor etc. complete. [C] 25 mm.(iteam code

23057,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point to

wall Ceiling & floor CPVC (SDR13.5) PIPE

having National Sanitation Foundation(NSF)

seal for potable water of following dia. nominal

bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.

[D] 32mm.(iteam code 23058,S.O.R

Ahemdabad City 2023-24)

Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR13.5) PIPE having

National Sanitation Foundation(NSF)seal for

potable water of following dia. nominal bore

tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [E]

40mm(iteam code 23059,S.O.R Ahemdabad

Providing and fixing concealed center point to

wall ceiling & floor CPVC(SDR13.5) PIPE having

National Sanitation Foundation (NSF)seal for

potable water of following dia. nominal bore

tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [F]

50mm(iteam code 23060,S.O.R Ahemdabad

Providing laying and jointing in true line

and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

138 600.00 every two metre C/C or shall be Rmt 71.93

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.(iteam

code 23061,S.O.R Ahemdabad City 2023-24)

Providing laying and jointing in true line

and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

139 600.00 every two metre C/C or shall be Rmt 90.93

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.(iteam

code 23062,S.O.R Ahemdabad City 2023-24)

Providing laying and jointing in true line

and level 32mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

140 600.00 every two metre C/C or shall be Rmt 117.97

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.(iteam

code 23063,S.O.R Ahemdabad City 2023-24)

Providing laying and jointing in true line and

level 40 mm dia. U.P.V.C. Pipe(SCH-40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

141 600.00 C/C or shall be concealed as directed including Rmt 146.65

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.(iteam

code 23064,S.O.R Ahemdabad City 2023-24)

Providing layingand jointing in true line and

level 50 mm dia. U.P.V.C. Pipe(SCH-40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

142 400.00 C/C or shall be concealed as directed including Rmt 193.73

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.(iteam

code 23065,S.O.R Ahemdabad City 2023-24)

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard

weight.(i) Square mouth traps. (A)

100mm x 100mm size P type.(iteam code

24006AA,24.19,S.O.R Ahemdabad City 2023-

Providing cement vata (10cm. x 10 cm. size)

quarter round in cement mortar 1:1 including

144 600.00 neat cement finishing, watering etc. Rmt 23.45

complete.(iteam code 17015,S.O.R Ahemdabad

Providing and fixing 30mm thick factory

made moulded door shutter wood free

consisting of frame made out of M.S. tubes of

19 gauge thickness and size of 25mm x

25mm for stiles, top and bottom rails,

M.S. frame shall have a coat of steel

primers. The inner panel shall consist of 25mm

thick High Density EPS conforming to IS

4671-1984 bonded with 2mm thick termite

proof, water proof and fire resistant moulded

PVC sheet with 2,4,6 raised panel design in

different plain and /or prelim colours after

routing the moulded design on one side and

145 50.00 2mm plain and/or prelim PVC sheet on sqm 1960.00

other side of the EPS. The edges of panel

to be sealed with lipping of 10mm wide PVC

sheet batton (made by sticking 2 PVC rigid

foam sheets of 5mm thickness using PVC

solvent cement) and stiles 25mm (5mm x 5)

thick and 30mm width PVC sheet fitted along

M.S. tube for lock provision and for lock height

5mm thick PVC sheet of size 150mm x

100mm fixed with upper and lower face of

inner side of EPS panel etc. complete as per

direction of Engineer in charge manufacture’s

specification and drawing.(iteam code

10049,S.O.R Ahemdabad City 2023-24)

Providing and fixing factory made polyvinyl

chioride (PVC) door frame of the size 50 x

mm with a wall thickness of 5mm, made out of

extruded 5mm rigid PVC foam sheet, mitre

out of two corners and joined with 2nos. of

150mm long brackets of 15 x 15mm M.s.

Square tubes. The two vertical door profiles

are to be reinforced with 19 x 19 mm m.s.

square tube of 19 gauge, EPDM rubber

gasket weather seal to be provided through

out the frame. The door frame shal be fixed

to the wall using 65/100 mm long M.S.

screws through the frame by using PVC

fasteners. A miniumum of 4 nos. os

screws to be provided for each vertical

members and minium 2 nos. for horizontal

members etc. complete as per

manufactures specification and direction of

Engineer in charge.(iteam code 10050,S.O.R

Ahemdabad City 2023-24)

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc.

with M.S. flats at required spacings and

147 300.00 frame alround, square or round bars with kg 100.17

round headed bolts and nuts or by screws (A)

Plain Grill.(iteam code 10025AA,10.1,S.O.R

Ahemdabad City 2023-24)

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc.

with M.S. flats at required spacings and

148 300.00 frame alround, square or round bars with kg 143.64

round headed bolts and nuts or by screws. (B)

ORNAMENTAL GRILL(iteam code

10025BA,10.1,S.O.R Ahemdabad City 2023-24)

Carring out plinth treatment to post

construction / existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As

Per 6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is

recommended as per I.S(iteam code

22007,S.O.R Ahemdabad City 2023-24)

Carrying out timber treatment to all wood

work including drilling holes and spraying

oil based chemical solution on surface of

timber work for termite control including

labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part

III (1% concentration by mass) is

recommended one litre chemical emulsion

diluted with 19 liters of kerosene.

Total diluted concentration will be 20 liters

inclusive of 1 liter chemical emulsion

application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood

surface not protected by paint or

varnish.(iteam code 22005,S.O.R Ahemdabad

Providing and fixing Gun metal check or non-

return fullway wheel valve.(B) 20mm

dia.(iteam code 23031B,23.99,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(C) 25mm

dia.(iteam code 23031C,23.99,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(D) 32mm

dia.(iteam code 23031D,23.99,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(E) 40mm

dia.(iteam code 23031E,23.99,S.O.R

Ahemdabad City 2023-24)

Supplying nece hardware, G.I.Fittings etc.comp

of app. Quality as under

a 20.00 S.S. Stopper 30 Cm long of ASIS 304 No. 180.51

b 30.00 S.S. Stopper 20 Cm long of ASIS 304 No. 126.27

c 25.00 S.S. Aldrop 20 Cm long of ASIS 304 Grade No. 216.10

d 15.00 S.S. Aldrop 25 Cm long of ASIS 304 Grade No. 324.58

e 20.00 S.S. Aldrop 30 Cm long of ASIS 304 Grade No. 396.61

S.S. Handle for door/ window 10 Cm size of

g 20.00 Ball cock of copper 25 mm diameter Each 112.71

h 20.00 Ball cock of copper 50 mm diameter Each 161.02

i 20.00 Ball cock of abonite 25 mm diameter Each 87.29

j 20.00 Ball cock of abonite 50 mm diameter Each 116.95

k 20.00 Labour charges - Carpentar 1st Class Each 725.00

l 20.00 Labour charges - Carpentar 2nd Class Each 638.00

m 20.00 Labour charges - Plumber (Fitter) Each 697.00

n 20.00 Labour charges - Plumber(Fitter)Assist Each 570.00

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.659 Kg/mt with sliding shutters

of horizontal member size 40mm x 18mm x

156 35.00 1.29mm @ wt.of 0.456Kg/mt, vertical Sqm 1696.73

member of size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with

mm thick transparent bronze colour tinted

float glass with powder coated aluminum

fittings and fixtures and transparent silicon

sealant glass fixing to frame as per

details etc complete for window.(iteam

code 11028,S.O.R Ahemdabad City 2023-24)

Providing and fixing standared

extruded of alluminium section of size

x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt

with colour anodized alluminium frame

with 5 mm thick transparent bronze

colour tinted float glass with colour

anodized alluminium frame for ventilation

with 5 mm thick frosted glass as details

etc complete for.window(iteam code

11029,S.O.R Ahemdabad City 2023-24)

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size 127mm x

horizontal Four track member size

kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with

sliding shutters of horizontal member size

,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 5 mm

thick transparent bronze colour tinted float

glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

complete for window.(iteam code 11026,S.O.R

Ahemdabad City 2023-24)

Providing and fixing standared

extruded of alluminium section of size

Rmt with colour anodized alluminium frame

with 5 mm thick transparent bronze

colour tinted float glass as details etc

complete for Fix window.(iteam code

11031,S.O.R Ahemdabad City 2023-24)

Providing and fixing window having

extruded aluminum Colour Powder Coated

section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal

two track member size 61.85 mm x

vertical member of size 61.85 mm x

Kg/mt with sliding shutters of horizontal

160 25.00 member size 40mm x 18mm x 1.29mm @ Sqm 1688.78

wt.of 0.456Kg/mt, vertical member of size

0.456Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with

powder coated aluminum fittings and

fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for

window.(iteam code11034,S.O.R Ahemdabad

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S.

laths inter-locked together through their

entire length and jointed together at the

ends by end locks mounted on specially

designed pipe shaft with bracket plates,

guide channels and arrangements for inside

and outside locking with push-pull operation

complete but excluding the cost of hood cover

and spring. (A) Shutters having width below

3.5.M.(iteam code 11006A,11.9,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 27.5 cm. long wire spring

grade No.2 of approved make for rolling

shutters.(iteam code 11007,11.1,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Hood cover for rolling

shutters (A) Shutters having width below

meters(iteam code 11008A,11.11,S.O.R

Ahemdabad City 2023-24)

Providing and laying Cement concrete

1:5:10 (1- Cement : 5-Fine sand :10-Graded

stone aggregate 40mm nominal size) bedding

for stoneware pipes of following internal

164 20.00 diameters with necessary formwork and Rmt 125.90

curing complete.(A) 100 mm dia. (112 mm

Ave.bed thickness)(iteam code

24002A,24.2,S.O.R Ahemdabad City 2023-24)

Providing and laying Cement concrete

1:5:10 (1- Cement : 5-Fine sand :10-Graded

stone aggregate 40mm nominal size) bedding

165 30.00 for stoneware pipes of following internal Rmt 211.59

diameters with necessary formwork and

curing complete.(B) 150mm dia. (166mm

Ave. bed thickness)(iteam code

24002B,24.20,S.O.R Ahemdabad City 2023-24)

Constructing brick masonry chamber

for underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-

166 5.00 cement :2- coarse sand :4-graded stone Each 2903.89

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.(iteam code

24016AA,24.44,S.O.R Ahemdabad City 2023-

Extra over items 136 for every additional depth

of 0.1M. of part thereof beyond 450mm

167 16.00 depth for Brick masonry chamber.(i) for Each 239.99

455mm x 610mm size.(iteam code

24017A,24.46,S.O.R Ahemdabad City 2023-24)

RCC Precast M.H.Frame & Cover Manufacture

supply & Delivery at store or at side of work

Precast RCC M200 Frame & Cover Suitable to

168 drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S.

Angles or Flat , cutting mold work etc.(GWSSB

1 8.00 Frame Suitable for 50 Cm opening of MH No. 1255.00

2 7.00 Cover Suitable for 50Cm Opening Of MH No 1314.00

1 6.00 Frame Suitable for 50 Cm opening of MH No. 1120.00

2 6.00 Cover Suitable for 50Cm Opening Of MH No 1194.00

c House connection Chamber Light Duty

1 5.00 Frame No. 911.00

Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete

block 30cm length,30cm height and 15cm

thick of M200 grade concret as per

169 30.00 approved design and including excavation Rmt 376.43

for fixing in proper line and level,filling the

joint with C:M 1:3 (1cement:3fine sand) etc

complete.(iteam code 14023A,S.O.R

Ahemdabad City 2023-24)

Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and

as per approved design Confirming to IS

15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP

63- 2018 etc. Complete. (iteam code

14033,S.O.R Ahemdabad City 2023-24)

Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and

also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation . The

Light weight calcium Silicate tile shall be

of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 &

Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on

true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’

runner suitably spaced at joints to get

required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet,

1200mm centre to

centre, and cross ‘T’ of size 24X28mm made

out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’

at 600mm centre to centre to form

agrid of 1200X600mm and secondary

cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum)

sheet(iteam code 16006,S.O.R Ahemdabad City

Providing and fixing false ceiling at all height

including providing and fixing of frame work

made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size

mm wide x 1.6 mm thick with flanges of 27 mm

and 37 mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener

12.5 mm dia x 50 mm long with 6 mm dia bolts,

other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts

& bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of

mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips

of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I.

wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with

the help of rawl plugs at 450 mm centre, with

172 170.00 25 mm long dry wall screws @ 230 mm Sqm 718.57

interval, including fixing of gypsum board to

ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at

230 mm c/c, including jointing and finishing to

a flush finish of tapered and square edges of

the board with recommended jointing

compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of

primer suitable for board, all as per

manufacturer’s specification and also including

the cost of making openings for light fittings,

grills, diffusers, trap doors, cutouts made

with frame of perimeter channels suitably

fixed, providing additional sections for

strengthening the oenings/cutouts, Trapdoors

all complete as per drawings, specification and

direction of the Engineer in Charge. Area of

cutouts shall not be deducted and no extra

payment shall be considered for additional

sections provided. Only plan area shall be

considered for payment. All curved surfaces,

recesses, waffles and corbellings shall be part

of the false ceiling & flat area in plan shall be

measured for payment. The rates are also

inclusive of necessary scaffolding, tools, tackles

etc. Complete for all floors and height with

frame wherever required for electrical & A.C.

fixtures & grill all as per drawings, specification

and direction of the Engineer in Charge. all as

per manufacturer’s specification and as per

drawings, specification and direction of the

Engineer in Charge. Excluding the cost of

painting with :

12.5 mm thick tapered

edge gypsum plain board conforming to IS:

Dismantling aluminium/ Gypsum partitions,

doors, windows, fixed glazing and false ceiling

173 250.00 including disposal of unserviceable surplus Sqm 17.68

material and stacking of serviceable material

with all lead as per instruction of EIC.

Providing and fixing in position Marine

Plywood of specified thickness following code

IS 710 - 1976 of approved makes as per Interior

design drawing/ Instruction of EIC for all type

174 9.00 of loose and fixed furniture, Panelling, Sqm 806.25

Partition, Bed head panel etc. The rates are

inclusive of all lead and lift,all floor levels, all

heights, all material, fixing, scaffolding, labour,

Wastage etc. complete in all respects.

a)Plywood 19mm th.

Extra over for plastering on ceilings and sofits

of stairs upto floor two level instead of

175 100.00 plastering on walls.(iteam code Sqm 24.57

17006,17.91,S.O.R Ahemdabad City 2023-24)

20 mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consisting of 12 mm thick backing coat of

sand)and8mmthickfinishingcoatof C.M. 1:1 (1-

cement : 1-sand) etc. complete.(iteam code

17009,17.95,S.O.R Ahemdabad City 2023-24)

Cutting out cracks of roof terrace to V- section

cleaning out, wetting , grouting with cement

177 10.00 and sand slurry 1:3 (1-cement 3-sand )(iteam Rmt 64.58

code 221002A,21.23,S.O.R Ahemdabad City

Conveyance charge of earth, lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregates of any kind

178 executed outside the road site. Rate also

includes spreading & levelling etc complete.

Internal conveyance above 50 mt done within

the work site is not payable.

90.00 a) Lead From 5 Km to 10 Km. Cmt 78.54

95.00 b) Lead From 10 Km to 15 Km. Cmt 104.65

P/A Tremix with dewartering machine and

floater machine on constructed CC work for

finishing the surface as per requirement. The

179 60.00 rate including all machinaries, labor, loading, SMT 54.00

unloading, transportaion etc complete as per

direction given by engineer in charge.

Making 15 mm. Groove in RCC work on road &

filling it with polysulfied selant & finished ot

good incl. all labour charges etc. comp.as

Repairing damaged M.H. and rasing M.H. up to

road level incl. removing damaged brick work

and repairing by brick masonry in C.M. 1:5 and

181 plaster in C.M. 1:3 and fixing C.I. steps and

existing MH sheet cover, removing the debris

from MH and carting the same as directed.

15.00 (A) up to 0.15 mt. (@ Two Coarse) No. 728.82

18.00 (B) up to 0.35mt. (@ Four Coarse) No. 1155.44

19.00 (C) up to 0.65 mt. (@ Seven Coarse) No. 1786.49

Constructing Chamber of following size

including excavation, refilling, BBCC (1:5:10) for

foundation, C.C.Channel (1:2:4), finished

182 mm thick cement plaster inside in CM 1:3,

finishing with cement slurry, Brick masonary in

CM 1:5 & excluding the cost of chamber seat

cover etc.completed.

0.60 X 0.45 mt. size Inside Clear, Depth

from 0.0 to 0.90 meter

0.60 X 0.75 mt. size Inside Clear, Depth

from 0.0 to 0.90 meter.

0.75 X 0.75 mt. size (Inside Clear) Depth from

0.0 to 1.20 meter.

Constructing Bombay Pattern Type Catch Pit of

size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick brick

maso. wall in the prop. of CM (1:6) with 40 mm

183 5.00 thick IPS flooring in the prop M15 at bottom No. 3110.80

and 15 mm thick cement plaster inside the

catch pit in the proportion of CM (1:3) with out

jali etc. comp. as directed.

CatchPit Jali (Heavy duty) Fixing P/F FRC catch

pit jali with frame 600mm x 600mm clear

opening etc. comp.. As directed by engineer in

R. C. C. PIPE (Vertical Cast) Providing and

supplying ISI Standard R.C.C. pipes in standard

lengths of following class and diameter suitable

for either collar joints or rubber ring joints

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges,

185 loading, unloading, conveyance to

departmental stores, stacking etc Note : One

collar should be supplied with each full length

plain ended RCC pipe, cost included in rates

below. One rubber ring should be supplied

with each full length socketed pipe, cost

included in rates below.

Lowering, laying and jointing R. C. C. pipes of

following diameters in proper position, grade

and alignment at all level as directed by

185 A Engineer-in-charge including conveyance from

stores to site of work, labour, giving hydraulic

testing as per ISI code.

Providing and supplying,and jointing ISI mark

only standard length stoneware pipes of

following class and diameter including

excavation for laying of pipes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking

etc. compl. (IS651/1989 or its latest revision)

including labour work for lowering, laying,

joiting with cement mortar (1:1) proportion,

proper postion, grade and alignment and all

level as directed by engineer in charge

including store to site of work jointing material

a 10.00 100 mm dia Rmt 165.52

b 10.00 150 mm dia Rmt 242.98

c 10.00 230 mm dia Rmt 400.54

Hiring Charges For J.C.B.Machine Inclduing

Cost Of Fuel, Operator, Dirver Etc..

Supplying Pneumatic Breaker Machine for RCC

Slab or Asphalt Demolishing Work on site by

using Operator, fuel, power Supply etc.

Complete as Directed. (No payment should be

188 80.00 allowed for non working condition of Hr 600.00

machinery and for pipe line excavation and

M.H. work. Allowed only for break down work)

(Based on Previously approved rate by C E sir )

Constructing Slab type M.H. Chamber of the

following size including excavation, refilling,

brick bats cement concrete (1:5:10) of

thickness 15 C.M., CC Channel (1:2:4) of

thickness 10 C.M., finished 15 mm thick

cement plaster inside & outside (Only for shaft)

in CM 1:3, finishing with cement slurry, P/F

mm dia M.S.Steel HDPE coated steps 35 cm c/c

at 35 cm staggered in masonary CM 1:5, RCC

Slab in CC 1:1.5:3 of thickness 23 C.M.,

including Cantering & reinforcement (double

jalli at 15 C.M. c/c bothway 12 mm dia.) but

excluding the cost of Manhole seat cover

etc..completed. of Size 1.00 X 1.40 meter

(Inside Clear, M.H. length should be parallel to

1.00 to 2.00 meter depth, (Slab at Ground

2.00 to 3.00 meter depth, (Slab at below

3.00 to 4.00 meter depth, (Slab at below

Making connection to the ex.M.H.in running

sewer incl. Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be

well repaired as per instructions.

a 8.00 a. 150 mm to 300 mm dia. No. 1339.29

Cutting the pipes of following dia coming in the

new M.H.in running sewer including cutting

bars, including removing debris /silt from the

191 M.H. and carting at a suitable distance

etc..complete as directed. No payment for

M.H. work will be made until pipe is not cut

completely in all respect.

a 9.00 150 mm to 300 mm dia. No. 1133.93

Providing Kachha of Pakka Dummy in the

following dia pipes and removing the same

after completion of the connection work as

b 12.00 (B) 350 mm to 600 mm dia No. 302.68

Providing Dead Cantering using good quality

Country Wood Planks, wall Plate of required

thickness and size including placing the nece.

193 15.00 supports of reqd. size, nailing, fixing with Smt 312.50

mortar, levelling. All specification for dead

centring as per standard engg. practice etc.

comp. as directed.

Providing and operation dewatering Pump

including fuel charges & operator Charges etc.

as directed etc. comp. (Shift for Eight Hour)

(For Each Pump Set, No payment should be

allowed for non working condition of

Providing & Fixing the double layer safety net

195 60.00 along the scafolding to avoid any free fall of Smt 194.00

debris etc. complete.

Providing & Fixing the green/black colour

196 80.00 hessaian cloth to cover the scafolding etc. Smt 51.00

Structural steel work ( Confirming to IS 4923-

1997) riveted, bolted or welded in builtup for

all type sections, in framed work, including

cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer all

complete as per the structural designs and

directions of Engineer in charge. Safety

grills/doors of required pattern for windows /

Door/ ventilators using M.S. flats/bar/box

sections as per design and drawing including

one coat of primer.(iteam code20054,S.O.R

Ahemdabad City 2023-24)

F.R.C. Extra Heavy Duty (EHD-35) Manhole

Covers & Frames Cover : 728mm ø & 100 mm

thick circular cover, 35.00 MT load design,

100x2mm MS flat allround, 16mm ø plain

round bar for lifting the cover & should be

198 10.00 fitted with plastic cups. Frame : 560 mm ø clear Set 3354.74

opening, outer size- 888x888x175 mm. On the

upper periphery of frame 25 x 3 mm wide MS

flat should be well embed in concrete to

protect the edges of frame. FRC E.H.D.-35

manhole cover & frame described as above

F.R.C. Heavy Duty [HD-20] Machinehole Covers

- 560 mm ø clear opening, The dimension of

199 5.00 frame and cover as per mentioned in Amend No. 1720.44

No.1 to IS 12592 : 2002 table

F.R.C. Medium Duty [MD-10] Machinehole

Covers - 560mm ø clear opening, The

200 5.00 dimension of frame and cover as per No. 1255.52

mentioned in Amend No.1 to IS 12592 :

Carting and Fixing M.H., Chamber or Catchpite

Seat and Cover in line and level to match

exisisting road level in C.C. 1:2:4 and finishing

201 10.00 smooth, watering and protecting for 7 days No. 750.00

etc. complete as directed. M.H. seat cover will

be supplied byA.M.C.(from any store)

Supplying, labour for break down repairing

work for activities like excavation, disliting,

202 removing debris from trench back filling etc.

comp. as directed by Eng.in charge.

30.00 Mazdoor at day /Night No 363.30

30.00 Fitter at day / Night No 380.30

30.00 Makadam/ supervision at day / Night No 379.46

P/F. to wall ceiling and floor galvanized mild

steel tubes (Medium grade) of the following

nominal dia. with all tube fittings and clamps

incl. making good the wall, ceiling and floor. (At

any floor level) (Bldg.Sor 2015-16,23.2,23001 a

Providing & Applying Cement Popada

Plaster In Cement Mortar In 1 : 3 Incl.

204 950.00 Cleaning Surface Before Plastering Rate Also Smt. 120.00

Incl. Scafloding, Watering , And Neat

Finishing Etc. Comp. As Dire.(N.S./ARC)

Providing and applying fibere reinforced

cementitious micro concrete work in cellings

and beams incl.mixture of CEMSCREED HM (F)

fair mate company material, FBR bonding

agent material with water in suItable

proportion anti corrosive treatment on

exposed beam,celling steel bars with safeCore

R incl.all kind of labour etc.comp.including

three coat of white wash.(Approved Rate in

Labour Work for moulding the polish kota

stone surface rate also including provding

206 60.00 cutting and grinder machine for molding work Rmt. 150.00

etc.complete as directed.(app.rate)

Labour work for Polish kota stone surface rate

also including providing cutting and grinder

machine for molding work etc comlete as

directed.(app. rate)

Providing And Laying Cement Concrete

Flooring For I.P.S.1:2:4 (For Indian Patent

Stones) (1 Cement: 2 Coarse Sand:4 Graded

208 500.00 Stone Aggregate 20 Mm. Nominal Size) Lain Smt. 198.45

In Layer Finished With A Floating Coat Of

Net Cement.(40 Mm Th.)(SOR 2021-22

P.160,Item No.14.71,14015AA)

Additional Rate For Providing Water Proofing

Solution in I.P.S

Providing and Fixing pvc.Door (sintex door-

equivalent) with necessary alluminium fitting

with EL-7 section frame (Approved Rate as per

P/F glass of 4 mm thik for vent lowers and

211 150.00 window with wooden border patti as per No. 150.00

instruction of eng. In chage.(app.rate)

Providing and fixing rough cast wired glass

mm thick bedded in putty and thick with

wooden beading including the cost of wooden

beadings of Indian teak wood and necessary

cutting of glass. (SOR 2021-22 PG NO-

50.00 (C) wired figured glass. Smt. 659.58

Labour work for fixing above or any

interlocking blocks/nimbhada on up to 50mm

th sand bedding,levelling,watering anf fixing.

213 456.00 Rate incl. average 30cm depth for excavation Smt. 69.64

and or filling,carting away debries/excavated

material up to 5 km and cleaning the site

etc.comp. as directed.I00194

Providing & Laying China Mosaic Flooring On

Terrace With 6Mm Th.White Or Coloured

Glazed Tiles Chips Of Mini.25 To 35Mm

Approved.Square Or Rectangular Shape &

Fixing It.Before Start The Work Remove All

Existing Flooring & Open Old Slab Surface With

Wire Brush & Fill Crack If Shown With Water

Proof Material.Than For Making Level

Gps.Work Done In Mini.45 To 50 Mm Th.&

Fixing.China Mosaic In Cm 1:3 With Neat

Cement Slurry At Top & Filling The Gap With

White Or Colour Cement With Finishing

Smooth Surface & Even Shade Incl.Cleaning

Of All Dirt,Dust & Other Foreign

Matter.Rate Including For Making Colour

Patta,Round Vata With Fixing Neccessary

Water Spout Opening Gap Etc.Comp.As

Directed.(As per A.R.C)

Providing and laying polished granite stone

slab 18 mm thick in risers of steps, dedo and

pllars laid on 10 mm thick cement mortar 1:3

215 70.00 (1 cement : 3 coarse sand) and jointed with Smt. 2672.00

gray cement slurry including rubbing &

polishing etc. complete. (SOR 2015-2016,SR.

Providing & fixing 2.00 mm thick F.R.P. sheet of

good quality and standard make rate also

includes necessary fabrication structure in the

grid of 1'-6" x 1'-6" size usiung hollow pipe of

size 3/4" x 3/4" , 2" x 1" & 1" x 1" rate also

216 90.00 inclusive necessary bending ,cutting and Smt. 1865.00

fabrication charges and priming coat and

coats of oil paint of shade approved by

engineer in-charge rate also includes washer

and silicon paste required for fixing the sheet

in good quality as diredted.(As per ARC)

Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

217 30.00 excavated rock, fly ash, aggregate of any kind Cmt. 235.51

etc. comp. upto 5 km lead. (Bldg.S.O.R. 2021-

Providing & Fixing Chromium Plated Brass

Flush Cock With Lever Of "Ess Ess" - Trend

218 10.00 Series Or Equivalent Make Incl.Fixing In Pipe No. 1800.00

Etc.Comp.As Dir.Of Engg.In Charge.(N.S.) (1)

25 Mm Dia.I00117

Provdg. & fixing 12.5 lit.PVC Flush tank with

219 130.00 nece.fixtures etc.comp as per site condition No. 1165.20

(R&B Sor 21-22 I.C NO .M216+L025)

P/F Jet Spreay at Europeon WC Pan, incl nece.

lath connection, stop cock, and other fixing

220 200.00 material and labour as per inst. of engineer in No. 361.00

charge(R&B Sor 21-22 I.C NO .M738)

Providing & Fixing Polytheline Over Head Tank

With Necessary Dia.Holes For Outlet,Inlet Over

221 50000.00 Flow And Washout Necessary Washer And lit 7.72

Checkput Etc.Comp.(N.S.) I00105

P & F app.quality for Conseal lock in Alu.door

222 124.00 .as per inst of engg in charge No. 300.00

.etc.comp.(app.rate)

P & f app.quality for brass baby latch (door

223 20.00 stopper) as per inst of engg in charge No. 180.00

.etc.comp (app.rate)

Providing & Fixing In Position Alluminium

Doors With Frame Using Approved Quality

Anodised Extruded Alluminium Section As

Approved By Engg.In Charge(Jindal

Alluminium) (A)Frame Sections 101.6x44.45

Mm(B)Shutter Bottom Vertical & Top Section

1.31Kg/Mt)(C)Shutter Bottom Section At

224 80.00 114.3x44.45 Mm At (1.37 Kg/Mt) Shutter Smt. 2900.00

Middle Section At 100x44.3 Wt.(1.37Kg/Mt)

Incl.Providing & Installing 5 Mm Thick

Approved Color Acrylic Sheet Of Standard

Quality Fixed With Glazing Chips On Upper

Pannel & Laminated Sheet On Lower

Pannel (Wtt.0.13 Kg/Rmt) Etc.Comp.As

Direction Of Engg.In Charge. (N.S.) I00134

Providing & Fixing In Position Alluminium

Window Sliding / Fix Type With Frame Using

Approved Anodised Extruded Alluminium

Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent

(A) Frame Sections 65 X 25 Mm (At 0.41kg/Mt)

(B) Sliding Frame Bottom Section Of

225 70.00 X31.75 Mm (At 0.41 Kg/Rmt) (C) Shutter Smt. 2350.00

Top & Bottom Section 40 X 18 Mm (Wt.0.41

Kg/Rmt) (D) Shutter Interlock Vertical

Section 10 X18 Mm.(0.41 Kg/Rmt) (E)

Shutter Vertical Of 40 X 18 Mm (0.41 Kg/Rmt)

Including P/F Installing 5 Mm Thick

Approved Color Acrylic Sheet Of Standard

Quality Etc.Comp.(N.S.)

Provding & fixing Aluminum section partition

with powder coating using 2.5'' x 1.5'' all

section work incl.p/f 5 mm thick glass in upper

portion and 10 mm th. Novapan panel in lower

section Work incl.fixing the partition in

wall/floor with nece.screws,rubber gasket &

other fittings etc.comp. as directed by

engg.incharges.

Providing & Fixing In Position Alluminium Vents

With Frame Using Approved Anodised

Extruded Alluminium Section As Approved

By Engg.In Charge.(Jindal Alluminium) Units

227 50.00 Equivalent (Approved Rate) Frame Section Of Sq. M. 1950.00

63.50 X 38.50Mm (Wt.0.68 Kg/Rmt)

Incl.Providing & Installing 5 Mm Thick

Approved Color Acrylic Sheet Of Standard

Quality Etc.Comp. I00136

Providing fiiter for D.I./P.V.C./C.I./M./A.C.

Pressure water pipe linmaintenance work with

necessary manpower, tools, plants, and

228 20.00 equipments, and any other works required for No. 474.00

AMC as per instruction of Engineer in charge

etc. complete. I03723 As per Market Rate

Providing and fixing stoper (M.S.) 6 inch with

necessary fiting in wooden door including

229 30.00 removel of old fiting if any etc completed as No. 47.00

directed. I00870 6 inch

Providing and fixing Aldrop 10 mm size (M.S.)

with necessary fiting in wooden door including

230 35.00 removel of old fiting if any etc completed as No. 158.00

directed. I00872 Aldrop 10mm

Providing and fixing handle (M.S.) 4 inch size in

with necessary fitting in wooden windows

231 35.00 including removal of old fitting if any etc No. 39.00

completed as directed.I00873

Providing and fixing stopper (aluminium) 6 inch

with necessary fiting in wooden door including

232 40.00 removel of old fitting if any etc completed as No. 40.00

directed. I00890 6 inch

Providing and fixing Aldrop 10 mm size

(aluminium) with necessary fiting in wooden

233 25.00 door including removel of old fiting if any etc No. 138.00

completed as directed I00891

Providing and fixing handle (aluminium) 6 inch

size in with necessary fitting in wooden door

234 30.00 including removal of old fitting if any etc No. 36.00

completed as directed.I00889

Reparing of existing Aluminium

window/door/partition by making necessary

addition/alteration in same sides. Rate incl of

necessary fittings required and all labour

235 50.00 included. If necessary rate also incl. of No. 500.00

removing from position and refixing it at same

place after repairing it, etc comp. as directed.

Sub Desc : As per approved rate of AMC MET

Repairing of Doors/Windows shutters and

Frames including refixing-aligning shutter,

providing, replacing, fixing MS hinges,

Aluminium aldrops, stoppers, tadi etc.

complete excluding painting as per

specifications.(app.rate)

Providing & Fixing wall,ceiling and floor

Kg.F/Sq.Cm 160 mm working pressure

polythelene pipes of low density, complete

237 300.00 with special flange compression type Rmt 785.00

fittings,wall clips etc.making good wall ceiling

and floor as directed by engg.in charge

P/F. 10 mm thick Novapan sheet of approved

quality including fixing on partition with

necessary all fixtures as directed by engg.in

charge etc.comp

P/F. new 12.5mm th. Gypsum board ceiling

with necessary heavy weight GI framing

members as per site requirement.Work incl.

239 80.00 Supplying of app.brand gypsum boards and Smt. 650.00

fixing it as false ceiling in line and level with all

necessary hardware and labour etc. comp.as

dire. (At any floor level)

GLASS FILMS (sun control, Safety film,

decorative, reflective, frosted, opaque film etc)

240 40.00 Imported Lumaar make as approved by engg.in Smt. 540.00

charge etc.comp.

Providing and fixing 4 mm th. Acrylic sheet of

approved quality including fixing with

241 30.00 door/window shutter & frames with necessary Smt. 3140.00

all fixtures as dircted by engg.in charge

Providing & Fixing Floor Spring including fixing

242 10.00 shutter etc. complete as per inst. of engineer No. 3300.00

P/F. thermocol ceiling with necessary

aluminium T section 25 x 25 x 1.2 mm inclusive

fixing it to all wall to ceiling junction and at

junction position of two sheets ,item also

includes p/f 20 mm thick plain thermocol

sheets size (1 x 0.5 mt) with all necessary

fastening and hardware etc. comp.as dire. (At

any floor level)

labour charge for cleaning U.G. and O.H. tank

by modern science technology with six stage

process as below: (1)Dewatering existing

water by submersible pump. (2)Hydro jetting

by 150kg/sqcm pressure.(3)Vaccum cleaning to

suck the sludge and turbidity on bottom

surface.(4)Heat air system by 80C temp for

drying corners and all side of

244 tank.(5)Antibacterial chemical spraying to all

surface of tank and then(6)Ultra-violet

radiation pan treatment to tank in this six

stages on site classic supply etc.Electric

connection shall be provided by AMC MET

without charging any extra cost.the complete

tankcleaning by micro cleaning system comp.

as ditected.rate of above process are as below

capacity of tank.

A 20.00 up to 5000 litre NOS 1200.00

B 14.00 5000 litre to 10000 litre NOS 1500.00

1000000.00 Under Ground water tank

Providing and applying texture paint at

approved quality, colour scheme, including

preparation of surface, primer 2 coats+2 coats

245 200.00 of putty and texture paint, as per Smt. 495.00

manufacture's specification, scaffolding, roller

finish etc complete as per instruction of

engineer in charge

Supplying and installation of 10mm thick

recycled rubber flooring having anti-skid and

sound absorbing properties, square shaped,

with different color optns for create flooring

pattern, should be installed with proper

adhesive as per manufactures's guidelines,

joints of surface to be done properly to

prevent dirt & watepenetration inside the

surface. etc complete as per instruction of

engineer in charge

Arrangement of zula with two or nece. skilled

labour for repairing & maintenance work out

247 80.00 side building work etc.complete as per No. 950.00

insructer incharge(At any floor level)

Providing Scaffolding for Demolition Plaster

Work & painting workby 'H' Frame Stand of by

any means like bamboo, balli etc. including

248 1101.51 carting material work site and removing after Smt. 40.00

completion of work. Rate include any type rent

etc. complete for any height as directed by

engg. in charge.

Providing, Manufacturing, Fixing Chain Link Jali

8".0" X 4".0" as per detailed Sketch &

instruction of Engineer in Charge same as Lal

Darwaja Garden Pattern Consisting of 3" dia

MS pipe A class 5".4" height fixed at 8".9" in

C.C. (1:2:4) block of 9" X 9" X 9" size chain link

jali 2" X 2" X 10 gauge fixed in 35 X 35 X 5 mm

MS angle frame of 8".0" X 4".0" size with MS

249 20.00 flat of size 25X3 mm welded with jali etc. Rmt. 1940.00

Comp. The Jali is to be Welded to MS angle

with MS Flat as per instruction given. The MS

Pipe Jali, MS angle frame are to be painted one

coat of primer & two coats of paint as directed,

in line and level.The two hold fast has been

welded at equal distance at the bottom angle

of jali for support fixed in C.C. as directed by

Engg. in Charge.

Providing and fixing Aluminum Composite

Panel signages of various size and in any

language. The 2 mm thick Aluminum Sq.

composite panel shall be cladded with retro Inches

reflective high intensity grade radium sheets.

The signages shall be of any language

251 10.00 G.I. Coupling 50 mm dia A-Class RMT 80.51

252 10.00 G.I. Coupling 40 mm dia A-Class RMT 40.68

Providing & Fixing Door closer-complete of

253 50.00 Approved make to wooden / Alluminium Doors No. 480.00

as per direction of engg.in charge.(N.S.)

Providing and applying pressure grouting with

Water proofing materials silicon baseWater

254 50.00 repellent compund including matrial, labour Smt. 2345.00

with required all machinery and etc complete.

Providing and fixing Polycarbonate roof Lexan

sabic 10 mm th.sheets of approved make, on

structural roofing / sky ligh structures in shapes

as per Architect’s drawing. The rate shall

include cost of scaffolding, screws, nuts, bolts

and all necessary fixtures and fastening etc

complete (Rate excluded structural steel

Providing and laying brick bat coba water

proofing of average 100 mm. thick for sunk,

balcony, terrace, rain water gutter at all

heights/ floors using cement mortar 1:3,

arranging brick bats according to the slope,

adding suitable water proofing compound for

water-tightness and again providing on top

cement mortar 1:3 including addition of

256 700.00 waterproofing compound and finishing the top Smt. 567.00

with neat cement @ 2.75 kg/m² and preparing

the rough surface if required as per direction

and instructions, complete. The work should

be carried out through an approved specialized

agency. The contractor to give testing for

water tightness and provide guarantee for

years on Rs. 300/- stamp paper in approved

Performa. as directed by EIC. (R.A)

Providing and injecting approved grout in

proportion recommended by the manufacturer

into cracks/honey-comb area of masonry by

suitable gun/ pump at required pressure

including cutting of nipples after curing etc.

complete as per directions of Engineer-in-

Charge. Stirrer mixed SBR Polymer(of approved

make) modified Cement slurry made with

Shrinkage Compensating Cement in masonry

work. (The payment shall be made on the basis

of actual weight of approved grout injected.)

Providing & Placing dual shrinkage-

compensated,high flow cementitious

microconcrete added with aggregates in 1:0.5

(1 Powder:0.5 aggregate)proportion & suitable

water microconcrete ratio so as to acheive

compressive strength not less than 40MPa at

28 days for column jacketting inclusive of

Labour, material, curing and equipment for all

heights, location, shape & size as directed by

the architect/engineer incharge. (The mode of

measurement shall be as that of RCC as per IS

code)(APPROVE-ARC)

Providing & Applying One componant dual

shrinkage-compensated structural Grade ready

to use repair mortar in two or three layer for

repairs of beams etc. including all materials,

labour etc. for all heights, location, shape &

259 600.00 size.The finish surface to be level matched with Kg 40.40

the existing adjoining surface etc. complete as

directed by Architect/Engineer Incharge.

[Quantity consumed shall be accounted for

payment purpose].(APPROVE-ARC)

Providing & applying one or more coats of

Nondegredation(which dont reqire removal),

acrylic resin based membrane forming single

componant liquid curing compound for sealing

of moisture & curing including all materials

labour etc. for all heights,locations, shape &

size as directed by the engineer

incharge.(APPROVE-ARC)

Providing & applying of 6-9 mm thick 1:3 CM (1

Cement : 3 fine sand ) mortar over one coat of

epoxy bond coat on all type of surface for all

261 22.00 shape,size & height including all labour, Smt 661.00

material,scaffolding, curing etc.complete as

directed by the Engineer incharge.(APPROVE-

Providing & applying polymer modified cement

mortar in the proportion cement : sand in 1:3

(by weight) fortified with SBR in 2 or 3 or

layers upto 50mm overall thickness,wherever

total thickness of repair is exceeding 50mm,

use of 10/ 6 mm down size aggregate may be

required. The finish surface to match with the

existing adjoining surface etc. complete as

directed by Architect/ Engineer Incharge.

[Quantity of SBR actually consumed shall be

measured for payment purpose].(APPROVE-

Providing & applying polymer modified cement

mortar in the proportion cement : sand in 1:3

(by weight) fortified with SBR in 2 or 3 or

layers upto 50mm overall thickness. The finish

263 160.00 surface to match with the existing adjoining Smt 1187.34

surface etc.complete as directed by Architect/

Engineer Incharge. [Quantity of SBR actually

consumed shall be measured for payment

purpose].(APPROVE-ARC)

Galvanic Sacrificial Protection of steel:-

Providing and fixing sacrificial zinc anode to

prevent initialization of corrosion of

reinforcement due to chloride ingress from

VECTOR Galvashield XPI or equivalent at Min.

to 3 anode/sqm area of concrete (spacing of

300 to 600mm), covered with mortar with of

resistivity less than of parent concrete on the

cleaned reinforcement steel as per

manufacturers specification before applying

passivation coating. Item rate is inclusive of the

meterials all labour, supervision , tools and

tackles and transportation etc. complete as per

specification and as directed(APPROVE-ARC)

Providing and fixing PVC plain colour false

ceiing with grid type with a luframe consisting

of 600mmx 600mm 3mm thick plain PVC sheet

used as panel insert in a frame work made

using an odized alluminium T section of size

1”x1” (25 x 25mm,19 gauge or 1mm thick) in

square pattern of grid sizes of 2x2 (600 x

600mm).The alluminium frame work is

supported from the ceiling with the help of

G.I.hook and G.I.wire/6mm M.S.rods of

required sizes to maintain proper level etc.The

aluminium frame work is supported on side

wall with the use of alluminium Lsection of

size1x1 (25x25mm)angle set.Complete as per

direction of Engineer incharge. Manufactures,

specification and drawing

Providing and fixing 30 mm thick FACTORY

MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of

19 gauge thickness and size of 19mm x 19mm

for stiles and 15mm x 15 mm for top and

bottom rails. M.S. frame shall have a coat of

steel primers of approved make and

manufacture, M.S. frame shall be covered with

5 mm thick heat moulded PVC ‘C’ channel of

size 30 x 50 mm forming stiles, and 5mm thick

75mm wide PVC sheets for top rail,lock rail and

266 30.00 bottom rail on either side, and 10mm (5mm x Smt 1960.00

2) thick, 20mm wide cross PVC sheet as gap

insert for top rail and bottom rail, Panelling of

5 stiles and rails with 30mm wide x 5mm thick

PVC sheet beading on eighter side, and joined

together with solvent cement adhesive,. An

additional 5mm thick PVC strip of 20mm width

is to be stculk on the interior side of the ‘c’

channel using PVC solvent cement adhesive

etc. complete as per direction of Engineer in

charge,manufacture’s specification and

drawing.(APPROVE-ARC)

Supplying Potable Water Tanker attached with

motorpump to be filled from nearby water

distribution station of AMC. with 30 meter

Delivery Pipe. The tanker should be supplied as

267 100.00 & where reuired & when order placed by Trip 450.00

Engineer In- Charge The rate includes the fuel

charge, driver's charge etc.complete.

(APPROVE RATE At amc met-piu)

2mm Aluminium/ 4mm ACP sheeting fixed with

Type-Class-B High Intensity Grade Sheeting as

per IRC67:201 reflective sheeting of size

268 21.00 including lettering and signs as Smt 3955.08

applicable,pageNo38,Item code-M1048

Ahmedabad City Building SOR 2023-24- With

out GST(APPROVE ARC)

Providing and fixing of Roller blind

curtain/blackout.The fabric shall be woven

from formulated platisol extruded over a

polyaster yarn.The fabric should be weaved to

269 10.00 provide subtle view of the side of the blind and Smt 2610.00

should offere limination of glare and sunlight

radiance up to a minimum of 80%.The fabric

shall be flame retardant.(Approved rate)

Wall panelling with 12mm MDF fixed to

existing alluminium framing and making grove

270 10.00 as per design and finished with royal plastic Smt 1688.00

paint as per instruction of engineer incharge.

Providing&Connecting 75mm/100 mm dia PVC

joints like Coupler,Tee,Y-joints,Connecting Pipe

to wall,ceiling&floor open/concealed PVC pipe

line 10Kg. F/Sq.Cm working pressure of"

271 200.00 Prince/Finolex" or equivalent Brand of NOS 880.00

following nominal bore with all required fitting

with brass insert wherever

required,clamps&solution incl.making good the

wall, ceiling and floor.

Providing and laying ACP sheet for Elevation to

be fixed on availabel alluminum section

272 30.00 structure,all fixing materials,finishing,all lead Smt 2200.00

and lift,etc.complete as per engineer in charge

Providing and laying ACP sheet for Elevation

including fixing on alluminum section

273 30.00 structure,all fixing materials,finishing,all lead Smt 3150.00

and lift, etc. complete as per engineer

Providing&Fixing Stair/Balcony Railing as per

Consultant's Design from M.S.square

Rectangular,Round pipe of required

Dia,M.S.Flat,Angle,channel&other sections of

274 12.00 required size as per detail work include Rmt 965.00

sutting,bending,welding,grinding,Fixing with

necessary supports-hold fasts,Application of

one coat of Zinc Primer,Two coats of Oil

Painting etc.complete.(N.S.)

Fabricating,supplying and fixing in position SS

railing for staircase and balcony with brush

finish and 304 grade as perIndian Standrd and

detailed drawing including grinding,cleaning

and filling the welded spots with SSfinish (Only

Length will be paid for payment heigth

275 15.00 max.1.2mt.).The Work to be executed as per Rmt 4213.00

consultant drawing.Top Rail:S.S.Railing pipe

50mmx16GAS IS 304 Grade Vertical Support:

S.S.Rialing Sq pipe 32x32mmx16 GAS IS

Grade (at every 1.0mt to 1.20mt c/c)Horizontal

Safety members :S.S. Railing pipe 16 mm x 16G

ASIS 304 Grade (4 Nos. min.)

Providing and fixing 23cms wide chicken mesh

jaali with nails&then application of 15mm

276 16.00 plaster on R.C.C.&Masonary joints as per Rmt 220.00

directed of Engineer in Charge

Providing&Mixing of Waterproof Chemical in

Cement mortar for Inside/outside Plaster work

277 16.00 of"Roof","Fosroc"or equivalent make in Liter 260.00

proportion as per company's user

manuals&Direction of engg. In charge.

Providing and fixing brush finish stainless

steel(304)stair case railing which includes

cutting/bending/welding/buffing to give brush

finish and grouting in cement concrete with

anchor fasteners without disturbing the

flooring or as approved by the

consultants.THREE Horizontal pipes of 38mm

diameter each and top pipe of 50mm

diameter.Vertical Post of size 50mm diameter

at every 1200 mm.At the end and start of the

flight,baluster of75mm diameter pipe shall be

Providing and fixing Kitchen sink with C.I. or

M.S. brackets,painted white including cutting

279 5.00 holes in walls and making good the same but Nos 2257.69

excluding fittings. ©Vitreous China Sink. (i)

mm x 450 mmx150 mm size

Providing & Fixing S.S.304 Grade Sink of Nirali /

Krishna or Equivalent Make for Kitchen

Platform of size :24"x18" as per Direction of

engg. In charge

Supplying and fixing Conductive anti static

homogeneous Anti bacterial & Anti fungal Vinyl

flooring rolls of P group of approved make &

shade minimum 2.0 mm thick of standard sizes

as per EN 649/relevant code of manufacturers

specification having 10 years replacable

warranty over the existing floor. The rate shall

include all cuttings and wastages, cutting and

providing tile above electrical trunking, cost of

all materials adhesives of approved make etc,

including welding of joints., Coving and copper

strips, complete all as per detailed drawings

and specifications as directed by EIC Material

to be installed using Conductive Adhesive only.

Only laid area will be measured for payment.

Rate Includes lead and lift at all floors. The

item to include all materiral, fixing, scaffolding,

labour, Wastage etc. complete in all respects.

Note: No extra payment pay for architectural

Ornamental Design upto 10% of flooring area.

Rate shall be inclusive of cutting of tiles in any

shape, at any level for service cutout.

SIGNAGES HANGING FROM CEILING

Providing,Fabricating&Fixing signage's using

304 grade Stainless steel1.5mm thick brushed

steel finish plate (2nos) with 8mm thk. Acrylic

sheet covered with vinyl of approved

282 130.00 colour,sandwiched between two S.S plate and Sq.inch 61.60

fixed with s.s struds.Sandwiched plates should

be fixed in 12mmX12mm S.S 1.5mm thk .304

grade frame and punched(lasercut) lettering

carried out on both the s. s plate so frequired

size and text as directed by Engineer and

hanged to ceiling with the help of S.S 8mm

thick chain at both ends with making all the

fixing arrangement to the ceiling and to the

plate complete.

providing and Fixing High Quality Vinyl Printing

with Pasting in Lamination in 3 mm foam sheet

283 120.00 with loading, unloading, labour Charges ETC Sq.Feet 62.00

Complete.Approved Rate in Publicty

Department I.N.6,7,16

providing and Fixing Recto reflective Vinyl

Printing with ACP sheet Sinages with loading,

284 100.00 unloading, labour Charges ETC Sq.Feet 240.00

Complete.Approved Rate in Publicty

Department I.N.34

FIRE EXTINQUISHER (CO2,ABC,K-TYPE)

Refilling and servicing of ABC Type (Mono

Ammonium Phosphate 50%) Fire Extinguisher

with a capacity of 6 KG, including complete

285 60.00 discharge, internal cleaning, refilling with fresh Nos 850.00

MAP 50% powder, cartridge checking, and

overall inspection as per safety

standards.(approve rate at amc met-piu)

Refilling and servicing of CO₂ Type Fire

Extinguisher with a capacity of 4.5 KG,

including safe discharge of residual gas,

internal inspection, valve servicing, and refilling

with certified CO2 gas as per safety

norms..(approve rate at amc met-piu)

Complete refilling and servicing of K-Type Wet

Chemical Fire Extinguisher with a capacity of

Litres, specially designed for kitchen and

cooking oil fire hazards. Including safe

discharge, internal cleaning, refilling with

approved wet chemical solution, and valve

assembly servicing as per safety compliance

standards..(approve rate at amc met-piu)

Providing and fixing, testing and

commissioning of Dry Chemical Powder (ABC)

Store Pressure type 6 kg confirm to IS:

288 10.00 with ISI marked / TAC approved fitted with Nos 2495.00

required accessories including wall suspension

brackets.(approve rate at amc met-piu ARC

Providing and fixing, testing and

commissioning of Carbon Dioxide (Co2) type

Fire Extinguisher of 4.5 kg confirm to IS:15683,

289 10.00 with ISI marked/TAC approved fitted with Nos 4710.00

required accessories including wall suspension

brackets.(approve rate at amc met-piu ARC

FURNITURE ITEAM

Meeting Room Conference Table.(approve rate

at L.G &SCL HOSPITAL )

Executive Hydraulic Revolving Chair with foam

291 3.00 rubber Handel,directed by Engg. in Nos 15010.00

Charge.(approve rate at L.G &SCL HOSPITAL )

Medium Back Revolving Chairs with foam

292 5.00 rubber Handel,directed by Engg. in Nos 10580.00

Charge..(approve rate at L.G &SCL HOSPITAL )

Medium Back Revolving Chairs with foam

293 3.00 rubber Handel,directed by Engg. in Nos 15050.00

Charge..(approve rate at L.G &SCL HOSPITAL )

Box Type Sofa Two Seater Foam Rexin/Tepestri

294 1.00 Cusion,directed by Engg. in Charge..(approve Nos 27920.00

rate at L.G &SCL HOSPITAL )

Box Type Sofa Three Seater Foam

295 1.00 Rexin/Tepestri Cusion,directed by Engg. in Nos 38850.00

Charge..(approve rate at L.G &SCL HOSPITAL )

Round Tripod,directed by Engg. in

Charge..(approve rate at L.G &SCL HOSPITAL )

Side Tripod (Size: 18" x 12" x 15")

297 7.00 Laminated,directed by Engg. in Nos 1450.00

Charge.(approve rate at L.G &SCL HOSPITAL )

Office Chair with foam on seat-back

298 8.00 side,directed by Engg. in Charge.(approve rate Nos 5800.00

at L.G &SCL HOSPITAL )

Students Chair with writing pad,directed by

299 8.00 Engg. in Charge.(approve rate at L.G &SCL Nos 3500.00

Stool for Peon with laminated Top (Size: 13" x

300 10.00 13" x 21"),directed by Engg. in Nos 2160.00

Charge..(approve rate at L.G &SCL HOSPITAL )

Waiting Area's Chairs in Set of 3 Nos,directed

301 5.00 by Engg. in Charge.(approve rate at L.G &SCL Nos 7200.00

Executive Table Laminated Top Drawer

Cabinate with Side Cabinet(Special Shapes as

302 1.00 per Requirement),directed by Engg. in Nos 33685.00

Charge.(approve rate at L.G &SCL HOSPITAL )

B-Table with top laminate and with Top two

303 1.00 cabinate and apron,directed by Engg. in Nos 15850.00

Charge. (Size:4'X2'X2.5')

Computer Table with Key Board Drawer &

304 5.00 Cabinet (Size: 4' x 2' x 2.5"),directed by Engg. in Nos 12045.00

Charge .(approve rate at L.G &SCL HOSPITAL )

E-Table Laminated Top with one Cabinet (Size:

305 5.00 3' x 2' x 2.5),directed by Engg. in Nos 7000.00

Charge.(approve rate at L.G &SCL HOSPITAL )

Podium For Teacher's In Teaching

306 3.00 Room,directed by Engg. in Charge.(approve Nos 7140.00

rate at L.G &SCL HOSPITAL )

Steel Trainee Locker with 12 Nos. (Approx. Size

307 2.00 78" x 36" x 18"),directed by Engg. in Nos 20500.00

Charge.(approve rate at L.G &SCL HOSPITAL )

Big Steel Reck with 6 Partition (Size: 6.25' x 3' x

308 3.00 1.25),directed by Engg. in Charge.(approve rate Nos 6800.00

at L.G &SCL HOSPITAL )

20 Gauge Steel Store Cupboard with Two

309 2.00 Partition,directed by Engg. in Charge. (Approx. Nos 10050.00

Size 50" x30"X17")

20 Gauge Steel Store Cupboard with Glass door

and Four Partition (Approx. Size 78"

310 2.00 x36"X18"),directed by Engg. in Nos 14200.00

Charge..(approve rate at L.G &SCL HOSPITAL )

Notice Board with Glass Shutter (Size: 3.5' x 2"

311 5.00 x 3"),directed by Engg. in Charge.(approve rate Nos 4450.00

at L.G &SCL HOSPITAL )

Simple Soft Board with Cloth,directed by Engg.

in Charge.(approve rate at L.G &SCL HOSPITAL )

The Rates are Exclusive of GST. Prevailing GST will be paid separately.

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

mobile no. (amc met/Hospital)