Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹9,800
Closing Date
3 Nov 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER (WATER SUPPLY) GRWW
GARDEN REACH WATER WORKS, BIDHANGARH, KOL-66
MANUFACTURING, SUPPLY, DELIVERY, FITTING-FIXING OF DAMAGED ROTATING ASSEMBLY OF PUMP UNIT NO. 1 REPLACING WITH NEW SPARES , TESTING AND COMMISSIONING OF SAME AT CWPS-II, GRWW.
2026_KMC_1045380_1
KMC/EE/WS/GRWW/26-27/PH-II/23
Open Tender
MECHANICAL
Item Rate
15 days
CWPS-II OF GARDEN REACH WATER WORKS
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹9,800
8 Oct 2026
8 Oct 2026
5 Nov 2026
8 Oct 2026
3 Nov 2026
8 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | DISMANTLING OF NUT & BOLT WASHER ETC OF TOP COVER
FROM LOWER HALF CASING OF PUMP AND KEPT IT SUITABLE PLACE AS PER DIRECTION OF THE EIC. | 1 | ITEM | - | - |
| 2 | DISMANTLING THE BEARING HOUSING AT BOTH END &
DECOUPLING BOTH FROM PUMP MOTOR UNIT AND LIFTING
THE TOTAL ROTATING ASSEMBLY & KEEP IT AT A SUITABLE
PLACE AS PER DIRECTION OF THE EIC. | 1 | ITEM | - | - |
| 3 | DISMANTLING THE ALL PART OF THE ROTATING ASSEMBLY
ONE BY ONE SUCH AS COUPLING UNIT OF PUMP SIDE &
BEARING, SLEEVE, SLEEVE NUT AT BOTH END ETC.INCLUDING TO AND FRO TRANSPORTATION, LOADING, UNLOADING ETC. AS PER DIRECTION OF THE EIC. | 1 | ITEM | - | - |
| 4 | SUPPLY, DELIVERY AND FITTING-FIXING ALONG WITH
NECESSARY MACHINING & FINISHING OF SHAFT SLEEVE
MADE OF SS 410 IN RESPECT OF THE ROTATING ASSEMBLY AS PER SAMPLE AND DIRECTION OF THE EIC. | 2 | NUMBER | - | - |
| 5 | SUPPLY, DELIVERY AND FITTING-FIXING ALONG WITH
NECESSARY MACHINING & FINISHING OF BUSH FOR
COUPLING OF PUMP-MOTOR MADE OF NEOPRENE RUBBER IN RESPECT OF THE ROTATING ASSEMBLY AS PER SAMPLE AND DIRECTION OF EIC. | 6 | NUMBER | - | - |
| 6 | SUPPLY, DELIVERY AND FITTING-FIXING ALONG WITH
NECESSARY MACHINING & FINISHING OF COUPLING BOLT
WITH NUT MADE OF HT STEEL IN RESPECT OF THE ROTATING ASSEMBLY AS PER SAMPLE AND DIRECTION OF EIC. | 6 | NUMBER | - | - |
| 7 | SUPPLY, DELIVERY AND FITTING-FIXING ALONG WITH
NECESSARY MACHINING & FINISHING OF NUT, BOLT &
WASHER FOR TOP & BOTTOM CASING MADE OF HT STEEL AS PER SAMPLE AND DIRECTION OF EIC. | 16 | NUMBER | - | - |
| 8 | Supply and delivery of the following bearing (Make: SKF):NU322ECM | 1 | EACH | - | - |
| 9 | SUPPLY, DELIVERY, FITTING AND FIXING OF SKF MAKE
BEARING NO 7322 BECBM FOR 24UPH3 PUMP AT CWPS-II,
GRWW. | 2 | EACH | - | - |
| 10 | SUPPLY, DELIVERY AND FITTING-FIXING ALONG WITH
NECESSARY MACHINING & FINISHING OF SLEEVE NUT/JAM
NUT MADE OF SS 410 IN RESPECT OF THE ROTATING
ASSEMBLY AS PER SAMPLE AND DIRECTION OF EIC. | 2 | NUMBER | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
TechnicalBid23.pdf
Tender Documents • 0.43 MB
OID23.pdf
Additional Documents • 0.32 MB
BOQ_2562767.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .