A/R AND M/O AWHC Building at Surari Tehsil Kotli H.P. (SH- Repair of rooms, toilets and RCC works etc.). Deposit Work

Earth work in excavation in all kinds of soil for structure as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead and dressing of sides and bottom and back filling in trenches with excavated suitable material including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre nominal size) concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including the cost of form work and carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty millimetre nominal size) concrete for plain/reinforced concrete in open foundations and curing complete including form work as per drawing and technical specification clauses 802, 803, 1202 and 1203 including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge.

Providing weep holes in block masonry/ stone masonry/ plain reinforced concrete abutments wing wall, return wall with 100mm PVC pipe extending through the full width of the structure with slope of I (V) : 20 (H) towards drawing face complete as per drawing and technical specifications clause 614, 709, 1204.3.7 including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material upto any lead as per direction of Engineer - in- charge.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) in suspended floor roof etc so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying mechanically mix and vibrated in position cement concrete 1:1.5:3 (one cement : one point five sand) : three graded stone aggregate 20 mm (twenty millimetre) nominal size) of specified grade excluding the cost of centering and shuttering up to plinth level including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer - in- charge .

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete upto floor two level including the cost of binding wire and above on floor all level. Thermo-Mechanically Treated bars of grade Fe-500D including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge.

Second class brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer - in- charge .

Providing and laying antiskid vetrified matte finish tiles size 600x600 mmx10mm (six hundred into six hundred into ten millimetre) coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:4 (one cement: four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match including rubbing and polishing complete including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge.