Construction of anganvadi NUMBER 73 in ward 11

Amount

construction of anganwadi

Stone for masonry work

Portland Cement

Fine sand (zone IV)

Sundries

Coarse sand (zone III)

Laterite stone of size 35x20x20cm

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Solid blocks of size 40x20x10cm

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Adjustable span ESO+SI (2.35-3.40)

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Stone Aggregate(single size): 10 mm nominal size

Twisted steel/deformed bars

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Anjili wood scantls

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC pipe 25 mm outer dia . 12 kgf/cm2

PVC pipe 63 mm outer dia . 6kgf/cm2

200 mm Aluminium aldrop

Brass hard drawn hooks and eyes 150 mm

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

C.I. bracket for wash basin and sinks

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

15 mm PTMT bib cock

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

Vitrified floor tile 60x60 cm

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

G.I. pipes 40 mm dia

Welding by electric plant

Mild steel round bar 12 mm dia and below

Bidder Name

CM ABDUL GAFOOR