Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹28.7 LAccepted-Finance | ₹28.7 L | L-1 | Accepted-Finance Lowest Bidder |
| 2 | L-2₹30.2 LRejected-Finance | ₹30.2 L | L-2 | Rejected-Finance High bid |
Tender Value
₹31.2 L
EMD Value
₹62,361
Closing Date
8 Apr 2026, 3:00 pmClosed
EE, MD-IV, I and F C Deptt.
Office of the EE, MD-IV, I and F C Deptt Near DTC Depot Nangloi Delhi 110041
Fabrication Erection fixing Commissioning of complete MS Gate Providing and fitting of wheel Assembly rubber seal with painting and greasing of complete structure including repairing of hoist bridge column base plate etc of Delhi Gate regulator
2026_IFC_289488_1
EE/MD-IV/01/2026-27
Open Tender
Supply, Erection and Commissioning
40 days
Delhi Gate
Please refer Tender Documents
8 documents required · 8 mandatory
₹0
₹62,361
Yes
9 Apr 2026
1 Apr 2026
8 Apr 2026
1 Apr 2026
8 Apr 2026
1 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabrication, Erection, fixing & Commissioning of Regulator Delhi Gate at Drain of size 8.20 Mtr x 5 Mtr including side grooves, bottom sill beam with columns etc complete as per drawing and as per specification and direction of Engineer-in-Charge. (Annexure-A) | - | Kg | - | - |
| 2 | Fabrication, Erection and Commissioning of Wheel assembly of size 300 mm Dia. x 75 mm wide complete in respect as per existing design, drawing, specification and directions of Engineer-in-Charge | - | Nos | - | - |
| 3 | Supplying & Fixing of the Rubber Seal dia 44 x 100 mm of 14 mm thick with M.S Clamp Plate 50mm x 10mm with galvanized Nut/Bolt/Washer 12mm x 10mm and bottom wedge seal with clamp plates & galvanized Nut/Bolt etc. complete in all respect as required at site (Size = 5.00M + 5.00M + 8.20M at both sides & bottom of M.S Gate etc.) | - | Job | - | - |
| 4 | Fabrication, Erection, fixing & Commissioning of manually operated hoisting arrangement for gates with steel ropes and drum complete greasing of Regulator in all respect as per drawing, specification and direction of Engineer-in-Charge | - | Job | - | - |
| 5 | Reparing of Hoist Bridge, Column base plate having size 500x600mm including angles MS sheets complete etc as per direction of Engineer -in-Charge | - | Kg | - | - |
| 6 | Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). 4.1.3 | - | Cum | - | - |
| 7 | Scrapping, Cleaning and Painting of Complete M.S. Gate,Column,Top Plateform,Horizontal/Vertical pillars,Iron Ladders etc.complete as required with CA 50 black Epoxy Paint etc. complete in all respect as required at both side on regulators site and as per direction of Engineer-in-Charge.Regulator Gate having size of 8.20 m x 5.00 m | - | job | - | - |
stage.html
html • 0.04 MB
technical_384498.pdf
techsummary_384498.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.14 MB
BOQ_384498.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
