SPECIAL REPAIR TO BLDG NO P 298 AND T 302 AND PROVN OF CERTAIN SANCTIONED WORK UNDER AOR OF AGE BR I OF GE ARMY CENTRAL JODHPUR (8913/E8)

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed by Engr-in-Charge.

Surface excavation n.exc 30 cm deep & avg 15 cm deep & getting out in any type of soil.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or shafts, wells, cesspits, manholes,pier holes etc. n exc 10 Sqm n plan and n exc 1.5m in depth and getting out in soft /loose soil complete.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated at a level n.exc 1.5 m above the starting point and depositing where directed by Engr in Charge.

M & L sand filling spreading and levelling in layer not exc 25 cm thick, well ramming including watering and consolidation complete all as specified and directed

M & L broken stone hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled / rammed to a true surfaces complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , sub foundation etc complete all as specified and directed.

M & L for PCC 1:2:4 (type B-1) Mix using 20mm graded crused stone aggregates as in curb, coping, plinth course, floor finish etc complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-2 using 20 mm graded crusheed stone aggregate as in plinth protection or similar places, without using extra cement complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregates ) as in sub base in plinth protection complete all as specified.

S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick (rubberised) with 6mm top layers of material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.

All as per item No 17 above but except stone complate all as specified and directed.

Dismantling of stone slabs of any description or any thickness in floors, roof etc laid bedded and dry complete all as specified and directed.

M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4 all as specified and directed.

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3 Cm in length all as specified and directed.

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set jointed and grouted in cm 1:3. complete all as specified and as directed.

M&L for PCC 1 : 2 : 4 Type B0 using 12.5 mm graded stone aggregate as in roof curb including weathering, slightly rounded or chamfered angle and throating etc complete all as specified and as directed.

M&L for 50mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in roofs, finished the surface even and smooth with WPC complete all as specified and directed.(Note : WPC measured & paid for saperetely)

M & L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in DPC complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and ramoring rubbish off the out of MOD land complete all as specified and directed.

M/L for 20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) use as a levelling course complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 floor finished even & rough to recievr tiling/floor finish complete all as specified and directed.

M&L non skid ceramic colour joint free tiles ist quality 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed .

M&L for glazed colour ceramic tiles ist quality of size 250x350x7mm/300x450x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete all as specied and directed.

M & L 18 to 20 mm thick machine cut Kota stone slab flooring etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including 10 mm thick rendering in cement mortor 1:6 complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed.

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.

M&L Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified and directed.

M&L preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper complete all as specified & directed.

Material and labour for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putti on plastered surface all as specified and directed.

M & L two coats of white wash on newly plastered surface of wall including preparation of surfaces complete all as specified and as directed..

M & L three coats of white wash on newly plastered/unplastered surface of ceiling including preparation of surfaces complete all as specified and directed.

M & L one coat of white wash on old surface of wall complete all as specified and as directed..

M & L one coats of white wash on old surface of ceiling complete all as specified and as directed.

M/L two coat of cement base paint (Snowcem) on newly plastered/ unplastered surfaces over one coat of white chalk on wall & including preparation complete all as specified and as directed.

M/L one coat of cement base paint (Snowcem) on old surfaces including preparation complete all as specified & as directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and as directed.

M&L for preparation of new steel surface of any description sec area n exc 10 cm width or girth and apply two coat of synthetic eenamel paint over a coat of red oxide primer complete all as specified

Dismantling of asbestos cement/GI// PVC ( corrugated , semicorrugated , etc ) sheet in roof covering complete all as directed.

Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horozontal or slopping) fair finished shurface complete all as specified and directed.

From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete.

M & L RCC design mix M-25 using 20 mm graded crushed stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and as directed.

M & L RCC design Mix M-25 using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. complete all as specified and as directed.

S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S & F mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Taking down of chowkats or frames w/o taking down shutters nexc 1.50 Sqm complete all as directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

M&L for Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified.

M&L for Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified.

S&F flush shutters 35 mm thick, solid core construction and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match.

S & F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a) and as directed.

S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

M/L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

M & L for PCC 1:2:4 type B1 Mix using 20mm graded crushed stone aggregate as in hold fast iron fixing including necessary form work all as specified and directed.

S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed.

S&F expended metal n.exc 4 Kg/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples including welding etc complete.

S&F 150mm long aluminum anodised handle fabricated type all as specified and directed.

S &F of stainless steel butt hinges 100 mm size complete all as specified and directed.

S &F of mild steel butt hinges 100 mm size complete all as specified and directed.

S&F 100mm size single action door spring hinge complete all as specified and directed.

S & F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and directed.

S/F of aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

S&F Mild steel pressed handles, oval type, stove enameled black of size 150mm

M & L preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (FIRST QUALITY) of any tint all as specified and as directed by the Engineer-in-Charge.

M &L preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (First quality) of any tint all as specified and as directed by the Engineer-in-Charge.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store for 25 mm dia .

ditto as per Srl item No. 86 above but 20 mm dia

ditto as per Srl item No. 86 above but 15 mm dia

S/F of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified for 25 mm dia.

ditto as per Srl item No. 87 above but 20 mm dia

ditto as per Srl item No. 87 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store all as specified.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank Make:- Sintex, Polxtuf 500 ltrs including tank led cover complete with fixing arrangement complete all as specified and directed.

S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M & L for 20mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite.

M&L 50 mm thick PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth all as specified and as directed.

M & L for mild steel framed work as in brackets etc for coller stands framed steps/stairs, chajja etc complete using MS angle iron Steel bars gusset plate incl cutting holes for cooler stand and chajja etc complete all as specified & as directed .

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

Taking down old wooden/ steel window/ventilator complete all as directed.

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without coller opening) complete all as specified and directed.

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without coller opening) complete all as specified and directed.

Factory made box type steel ventilator with glazing bars bars dovetailed or welded with one shop coat of zinc chromate primer all as specified.

Factory made box type steel ventilator without glazing bars bars dovetailed or welded with one shop coat of zinc chromate primer all as specified.

3 mm thick plain glass ordinary quality & glazing complete all as specified and directed.

4 mm thick sheet glass Pin headed and glazing with bedding in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed.

S&F MS with PVC coated decorative 25mm curtain rod with fixing brackets, knob etc complete all as specified and directed.

Taking down existing old Tar-felt from RCC roof, stone roof in any thicnes etc carefully including cleaning the roof surface by wire/coir brush and remouving all grits, stones, fungus , moss and finally washing down with water to the entire satisfaction of Engr-in-Charge .

Material and labour for providing cement concrete (1:2:4) type BO (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/undulation to make the existing as filling in depression of roof slab complete all as specified and directed.

M& L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegate with groovs shall not be exceeding 0.40 Sqm. (Note : WPC measured & paid for saperetely)

Supply only Integral water proofing compund (ISI Marked).

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

S & F as in repairs vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat cover and jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

S & F in repair Vitrous china wash basin as in repairs, white flat back size 550x400 mm including , waste pipe, MS brackets complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms) complete all as specified.

S&F in repair soap dish of PTMT fixed with screws complete all as specified and directed.

S&F in repair chromium plated towel rail 450 mm long fiexd to wall with chromium plated brass screws and woodn cleats complete all as spcified and directed.

S&F in repair MS chromium plated peg set of five fixing with wall complete all as specified and directed.

S/F chromium plated shower rose 75mm dia round shape complete all as specified and directed.

S & F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S &F 20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S &F 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S & F 15 mm dia angular stop cock with chromium plated long thread with flange complete.

S& F 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified .

S&F bib, cock 15mm dia, cast copper alloy with crutch or butterfly handle, screwed for iron pipe all as spcified as fixed .

S & F PVC bath cabinet box type with shutter complete as approved by the GE. Make : Prayag/Polytuf

Supply & Fixing in repair low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete all as specified and directed.

M&L in repair for high quality looking mirror with fancy type beading fixed to wall with chromium plated screw area n exc 2.0 sqm complete all as specified and as directed

S/F in repair 15 mm bore CP brass two way angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe fixed in repair complete all as specified and directed.

S & F in repair Bidet spray (Health faucet) with 1 meter PVC tube and holder, complete all as specified and directed. Make :- Jaquar

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 100 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F in repair 100 mm CI branch pieces single socketed T equal or unequal complete all as specieied and directed.

S&F in repair 75 mm CI branch pieces single socketed T equal or unequal complete all as specieied and directed.

S&F in repair 100mm CI bends any radius complete all as specified and directed

S&F in repair 75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.

S&F in repair 100mm dia CI vent cowl fixed to pipe complete all as specified and directed.

S&F in repair 75 mm dia CI vent cowl fixed to pipe complete all as specified and directed.

S&F in repair 75 mm dia CI floor trap with grating including jointing with solvent cement

S&F repair of PVC SWR gully trap 125/110 mm size including setting and jointing with solvent all as specified and directed.

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm complete.

All as per item No 144 above but fixed to wall

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75mm complete

All as per item No 146 above but fixed to wall

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm

S&F PVC (SWR) bends any radius 110mm

All as per item No 149 above but 75mm dia with oval acess door

S&F PVC SWR vent cowl 110mm

S&F PVC SWR vent cowl 75mm

S&F of PVC SWR floor trap with grating including jointing with solvent cement 75mm dia.

S&F (SWR) guly trap 125/110mm setting and jointing with solvent cement.

M & L PCC 1:3:6 type C-I using 20 mm graded crushed stone aggregate as in surface channel, drain etc. including necessary use and waste of form work complet all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm

Removing excavated at a level n.exc 1.5 m above the starting point

Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150 mm dia pipe complete all as specified and directed.

Supply , laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed. (Note- cement concrete used for haunching concrete shall be measured and paid separatly)

M&L for connecting 20 mm bore GI pipe from existing water supply line including necessary excavation , clamping making holes to existing pipe line

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore and fixed

Providing precast RCC using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6 complete all as specified and drected.

M&L for TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in man hole cover etc all as specified.

S & F for mild steel work in tubuler posts , rafter, purline etc. including special shaped washer etc. complete using ERW or including butt welded tubes conforming to IS-1161-1976 grade st -240 complete all as specified and directed.

M&L for framed work using MS angle iron , rectangular hollow sections. Solid Sq Bars, Flat iron, MS Channel sections , or hollow structural tubes etc incl necessary cutting & bending to shape & welding together complete as in gates , cattle traps , overhead trusses , railings etc complete all as per the design & patterns complete all as directed at site.

M&L for welding Cast iron designer pieces like spikes, spiral patterns & moulding pieces etc with intricate designs to the steel gate frame work complete all as specified & directed .

Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Precast cement concrete post of size 60cm long 100mmx100mm, 1:2:4 Type B-1 fixed in CM 1:4 with grooves for fixing of RCC jali.

Providing pre cast cement concrete louvres and jali, 35mm thick ( measured solid) incld all moulding, excluding frame, PCC 1:2:4 type B-0 (12.5mm graded agg ) set in CM 1:4 complete all as specified

S&F mild steel angles/flat iron as in fencing post and struts including embeeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, etc complete all as spficied Fe 290 Gde E-165.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only chainlink MS galvanised chain link fencing 75x75 mm mesh size all as specified

Mild steel bars 10mm dia and over round bar, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n exc 15cm long and dia of neck exc 11 mm and n exc 15 mm

M&L for cutting holes in brick wall or stone wall built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required depth of embedded portion of holdfast or lugs measured from the base of wall exceeding one bricks but n.exc two bricks complete.

M&L for proving pre constructional anti-termite treatment by treating the top surface of filled earth and under plinth protection at the rate of 5 liters of emulsion per square meter of surface complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for (a) One light point controlled by one, one way switch.

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

All as per item No 2 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket out let , 5 pin , 6 Amp FT.

S&F socket out let , 3 pin ,16 Amp FT. ISI Marked

supply and fix socketed stepped type electonic fan regulator flush type , ISI Marked.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings ISI Marked.

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Make :Crompton Fitting Cat No-DMLN1LTD8-16 & LED Lamp Cat No-LTT8-20 or equivalent in Havells Cat No LHEXBHP7PN1W020 /philips Cat part No-BN150W LED20S complete all as specified.

M/L in repairs sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length.

S&F distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN vertical type, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 40 Amp, 10 kA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

S&F MCB 4 pole 100 Amps, 16 kA, ISI Marked.

S&F connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified cat part No LSTO-30/45-CDL of CG or equivalent in Havell,s/ Philips.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Supply and lay cable XLPE insulated screened meter PVC bedded gal vanized steel strip or wire armored , electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size16 sq mm 4 core.

S&F exhaust fan 300mm sweep complete.

S&F isolator SPN 10 Amps

M/S KAUTILYA GARG

shri prabhu construction

Jai Doulat Construction Co

MEGHRAJ GEHLOT

SURESH TRADERS

KARNI CONSTRUCTION COMPANY